Morning all.
Julie here with some more cards to keep the birthday party running here at Uniko.
As you may know, we're celebrating Uniko's 8th Birthday. We've had the Birthday Linky Party .....
...and there's the amazing Birthday Giveaway where one lucky winner will receive a fantastic prize.
Today I have a couple of birthday cards to share, one feminine and one more unisex.
Here's my first card using the recently released Hello Lovely and a sentiment made up from elements from both Birthday Sentiments and Festive Sentiments stamp sets. Yes I said Festive, Happy is not just for Christmas!
I thought I would include some pics of the make for this post, I usually forget until I have almost completed the card but this time I made a special effort, not so much for this card but for the second!
Here are my elements, the peony cluster stamped and heat embossed with white EP, watercoloured and then fussy cut, a 5 x 7 white base card and a 61/4" x 4 1/4 " panel of matching card with an oval cut out.
I arranged my spray around the aperture and then placed the panel over the base card and traced the outline of the opening with a pencil. I then placed my base card in my MISTI and added the sentiment, stamping in black Memento. You need to rub the pencil out now!
To finish I popped the panel up on pads over the base and added a few sequins.
Now for my second card.
(Just to warn you, this is a photo heavy description)
It's an interactive one, inspired by this this video on You Tube.
I started by inking a 9.5cm x 14.2cm white card panel with the Scattered Polka Hexagons stencil in bright colours, then cut a slot in it 11/4" x 1/4" as shown below. I also cut a strip of card 1" wide from A4 and scored at 2" and 21/2". From some scrap card I also die cut some balloons and inked them with bright colours. You could of course use coloured card if you have it.
You need to ensure that your central balloon is the largest and you have a slightly smaller balloon in the same colour.
Now comes the assembly, looks way more complicated than it is.
The die cut balloons were added onto the stenciled panel, mainly around the edge and trimmed back to the edges of the panel.
On the 2" end of the long strip I added some strong double-sided tape and then the smaller of the pink balloons which was stamped with a sentiment from the Anniversaire Arts set, the edge of the balloon is just touching the fold. I did have to trim the excess white card away, you can take away but never add!
On the large balloon, I stamped the sentiment from Birthday Wishes and then added it over the top of the first onto the 1/2" space on the strip with just the widest part hanging over the fold.
Now its time to add this mechanism to the card.
The long section of the folded strip was slipped through the slot and secured to the base with more strong tape, just on the edge of the smaller balloon, making sure the large balloon was central on the panel.
Flipping the panel over I added more tape, keeping it away from the mechanism.
Then added it to an A6 black card which I had trimmed down by 1cm so that there was room for the pull element in an envelope.
By pulling the end of the strip the top balloon flips back to reveal the hidden sentiment.
I trimmed the excess card from the mechanism and added a pull instruction, some hi-lights with a white gel pen onto the balloons and some strings for the balloons with a black fine-liner.
And breath, told you it was a photo heavy post!
Well you may need a lie down in a darkened room after that but hope I've inspired you to have a go and perhaps join in with our birthday theme, you've only got a few days left!
Thanks for stopping to read until the end, see you back soon.