亚洲精品123区在线观看-亚洲精品14p-亚洲精品99久久一区二区三区-亚洲精品99久久久久中文字幕-麻豆精品永久免费视频-麻豆精品在线

設備簡介Equipment Introduction

  三維混合機用于制藥、化工、食品、輕工、電子、機械、礦治、國防工業以及科研單位的粉狀、顆粒狀物料的高均勻度混合，和其他混合機不同，三維混合機的軸承和料筒連接的部位在料筒外部，物料不會接觸到軸承，不會造成物料污染。由于三維混合機的混合筒多方向運動，使各種物料在混合過程中，加速了流動和擴散作用，物料無離心力作用，無比重偏析及分層，積聚現象，無死角。物料可有懸殊的比重，混合率達99.9%以上，本機可根據用戶需要配裝變頻調速器。

The 3D mixer is used for high uniformity mixing of powdered and granular materials in pharmaceutical, chemical, food, light industry, electronics, machinery, mining, national defense industry, and scientific research institutions. Unlike other mixers, the bearings of the 3D mixer are connected to the outside of the barrel, and the materials do not come into contact with the bearings and do not cause material pollution. Due to the multi-directional movement of the mixing cylinder in the 3D mixer, various materials accelerate their flow and diffusion during the mixing process. The materials have no centrifugal force, no specific gravity segregation and layering, no accumulation phenomenon, and no dead corners. The material can have a significant proportion, with a mixing rate of over 99.9%. This machine can be equipped with a frequency converter according to user needs.

工作原理operational principle

  三維混合機由機座、調速電機、軸、回轉連桿及筒體等部分組成。裝料的筒體在主動軸的帶動下作平移動及搖滾等復合運動，促使物料沿著筒體作環向、徑向和軸向的三向復合運動，從而實現多種物料的相互流動擴散、摻雜，以達到高均勻度混合的目的。

  The three-dimensional mixer consists of a base, a speed regulating motor, a shaft, a rotary connecting rod, and a cylinder. The loaded cylinder moves horizontally and in a combination of rock and roll motion driven by the active shaft, promoting the material to move in a three-dimensional combination of circumferential, radial, and axial directions along the cylinder, thereby achieving the mutual flow, diffusion, and doping of multiple materials, and achieving the goal of high uniformity mixing.

設備特點Equipment characteristics

• 混料器具有三維運動，從而使物料在流動，剪切，平移，擴散的作用下，使其由集聚到分散狀態并完成互相摻雜的過程，保證了物料混合均勻，均勻度可達999％以上。普通混合機，物科在容器內只作分合的簡單運動，效率氏，混合質量差；

• 容器有效裝載率達80％，混合時間短，效率高，(普通混合機僅40％)；

• 機器高度矮，對廠房無特殊要求，減少基建投資；

• 混合桶和機身傳動部分可實現隔墻安裝，便于實現GMP要求；

• 對于SYH-2型混合機可將各種形狀的混合容器安放在混合筒內進行混合，使用方便；

• 可實現無級調速，易于裝料和卸料；

• 長壽命，低噪音；

• 可為用戶實現真空上料或提升機上料。

• The mixer has three-dimensional motion, which enables the material to flow, shear, translate, and diffuse, and complete the process of mutual doping from aggregation to dispersion, ensuring uniform mixing of materials with a uniformity of over 999%. Ordinary mixer, which only performs simple opening and closing movements in the container, has high efficiency and poor mixing quality;

• The effective loading rate of the container reaches 80%, with short mixing time and high efficiency (only 40% for ordinary mixers);

• The machine has a low height and no special requirements for the factory building, reducing infrastructure investment;

• The mixing bucket and the transmission part of the body can be installed as partition walls, making it easy to meet GMP requirements;

• For the SYH-2 mixer, various shapes of mixing containers can be placed inside the mixing cylinder for mixing, making it convenient to use;

• It can achieve stepless speed regulation and is easy to load and unload materials;

• Long lifespan, low noise;

• Can achieve vacuum feeding or lifting machine feeding for users.

技術參數表Technical parameter table

注：設備產量僅供參考，具體產量以實際測試為準，

Note: The equipment output is for reference only, and the specific output is subject to actual testing