試驗用小型冷壓制粒機,干粉體高壓制粒,顆粒硬度、大小可調
試驗用小型冷壓制粒機,干粉體高壓制粒,顆粒硬度、大小可調
LMX系列小型實驗型干法制粒機
LMX series dry granulator for small experiment
產品簡介Product introduction
該機適合科研單位、醫院、學校、企業等單位用于中小型實驗。該機是可以將粉體或細粉體一步制作成顆粒的設備。制粒過程不需要加粘合劑,不需干燥。可制作4~80目(5~0.2毫米)顆粒,顆粒的大小、硬度均可調整。制成的顆粒可直接包裝,也可以用于壓片、沖劑、灌沖膠囊等。時產量:0.5~3kg。該機配有水冷卻裝置,制粒過程不會出現高溫以免造成物料變質。可加工熱敏物料、易吸濕物料。設備全部采用優質不銹鋼材料及衛生級密封件制作,不會對物料造成污染。為了滿足個別用戶的需求,也可采用防爆電機和電器件。該機具有占地面積小、拆卸清理方便、節能環保等特點。
The machine is suitable for scientific research units, hospitals, schools, enterprises and other units for small and medium-sized experiments.It is a equipment that can make dry powder into particles.Granulation process does not require water, adhesive or auxiliary agent, and no subsequent drying.Granulation process does not require water, adhesive or auxiliary agent, and no subsequent drying 0.2~6 mm small particles can be produced, The size, shape and hardness of the particles can be adjusted. The granules can be directly packed, and can also be used for pressing tablets, granules, capsules, etc.There are many types of equipment, and 10~150kg particles can be made per hour.The machine is equipped with a water cooling device. There will be no high temperature and no change in material characteristics during granulation. Can also be processed easily hygroscopic material and heat sensitive materials. The equipment is made of high quality stainless steel and food hygiene seal, and will not cause pollution to raw materials. In addition, the machine can also increase the dust removal equipment to prevent dust pollution and raw material loss during processing. The production of flammable materials can be equipped with explosion-proof motor and explosion-proof electrical control box.
工作原理Working principle
原料進入加料斗之后,由錐形螺旋螺桿對物料進行脫氣預壓縮后再均勻的輸送至兩個相對運動的壓輥中間進行壓片,其壓實力是通過油缸的推力由壓輥傳遞給物料的,被壓實的片狀物料自動脫輥并進入破碎機進行整粒,顆粒大小可通過更換破碎機的篩網進行調節。破碎出的成品顆粒回收,
非成品可再次投入制粒機再造粒。顆粒的厚度和硬度可通過調節油缸的壓力和送料、壓片的速度等方式進行調節。
After the raw material enters the feeder, the material is degassed by a conical spiral screw and then transported evenly to the middle of the two relative moving roller. The material is extruded by the roller to form a tablet and enters the particle crusher to break into small particles. The size of the particle can be adjusted by the screen mesh of the replacement crusher.
成品顆粒Finished particles
注:顆粒大小、硬度、形狀可調
Note: the size, hardness and shape of the particles are adjustable
0.1-0.5mm顆粒 particles | 0.5-1mm顆粒 particles | 1-2mm顆粒 particles |
2-3mm顆粒 particles | 3-4mm顆粒 particles | ≥5mm顆粒 particles |
片狀顆粒Flaky particles | 片狀顆粒Flaky particles | 片狀顆粒Flaky particles |
技術參數表Technical parameter table
型號Model | A型手動式Type A manual | B型自動式B type automatic type | |
投料量Feed volume | ≥50g | ≥50g | |
成品顆粒粒徑 Particle size of finished product | 80-4目(0.2~6mm)顆粒大小可調Particle size adjustable | ||
生產能力1 hour production | 0.5~5kg/h | 0.5~5kg/h | |
壓輥尺寸Roller size | φ80×25mm | φ80×25mm | |
壓輪轉速 Roller speed | 0~18 rpm | 0~18 rpm | |
送料轉速Feed speed | 0~61 rpm | 0~61 rpm | |
整粒轉速Crusher speed | 0~600rpm | 0~600rpm | |
液壓壓力 Hydraulic pressure | 0~7 MPa | 0~7 MPa | |
液壓站Hydraulic system | 手動油泵 Manual oil pump | 液壓站電動油泵 Hydraulic station electric pump | |
電器控制方式Electrical control form | 手動按鈕式調節 Manual button regulation | PLC人機界面,觸摸屏控制 Control operation with PLC and touch screen | |
冷卻裝置Cooling system | 水冷卻Water cooling | 水冷卻Water cooling | |
總功率Total power | 2.25kw | 2.8kw | |
電壓Voltage | 220v/380v或其它電壓Or other voltage | ||
外形尺寸Shape size | 550*500*1180 mm | 700×600×1300 mm | |
重量Weight | 198 kg | 280 kg | |
該機分自動式和手動式兩種 The machine has two types of automatic and manual type |
|
注:A型手動型與B型自動型的區別The difference between the A type manual and the B type automatic type
1、A型采用手動油泵,B型采用液壓站電動油泵。
Type A uses manual oil pump, B adopts hydraulic station electric oil pump.
2、A型采用三個變頻器需要分別手動調節,B型采用PLC人機界面,觸摸屏控制。
The A type needs three frequency converters to be manually adjusted. B adopts PLC interface and touchscreen control.
3、B型可增加篩選機、除塵裝置、和回料裝置,A型沒有此些功能。
The B type can increase the screening device, the dust removal device and the return device. Type A does not have such devices.
4、拆洗時,A型的送料斗需要手動轉起,B型則是通過液壓站自動升降。
In the cleaning device, A type hopper need to manually open, B type is automatically lifted by hydraulic station.
5、B型在設備出現堵料現象時具有自動報警功能,壓輪可反轉,自動排除故障,A型沒有此功能,需要人為排除故障。
The B type has automatic alarm function when the equipment appears plugging phenomenon, and the pressure wheel can rotate reversely and automatically exclude the fault. The A type does not have this function, and the fault should be eliminated manually.
注:以上兩種機型只是操作時方便性的區別,其制粒原理和壓片效果是一樣的。
Note: Type B is easier to operate than A, but its granulation principle and granulation effect are the same.