Showing posts with label Jewel Thief. Show all posts
Showing posts with label Jewel Thief. Show all posts

Wednesday, November 28, 2012

Quilled bracelet

Hello All,

Long ago, when meg pointed out that I ought to try quilled charm bracelet, the idea planted itself firmly in my mind. I had thought about it earlier too, but sometimes, it takes a friend to post a challenge in your head. After a long long time,I finally had the time to try one out and I must admit, I am in love with it. All the women out there who have daughter 10-12 yrs old, here is a treat for your princesses! :) I dedicate it to Meg and to Baba (who will always be that wide eyed 5 yr old for me) :)



All the charms are properly water-proofed, a practical and fun bracelet :)

Happy Quilling

Pritesh

PS: If my posts inspire you to create something on similar lines, I feel highly flattered. But please, do respect the effort I take in conceptualizing and executing, please give a direct link to my work when you are inspired by mine. Thanks for understanding........:-)

Monday, November 5, 2012

Evolution of the jhumka.......

Hello All,

My last post before I head home for Diwali (IF I tide over this storm of Diwali rush at work!).......the latest addition to the jhumka family, a BIG brother to the previous ones :D


Happy Diwali to you all, be happy and be safe........

Happy Quilling

Pritesh

PS: If my posts inspire you to create something on similar lines, I feel highly flattered. But please, do respect the effort I take in conceptualizing and executing, please give a direct link to my work when you are inspired by mine. Thanks for understanding........:-)

Wednesday, October 31, 2012

Some more quilled jhumkas

Hello All,

A very very quick post again...........Diwali means madness for us all! :D On personal front, on work front......a quick update on the jhumka series I am on to (and loving!)

I made two of these and the green and red one (though a little Christmasy to look at) is my absolute favourite :)




Happy Quilling

Pritesh

PS: If my posts inspire you to create something on similar lines, I feel highly flattered. But please, do respect the effort I take in conceptualizing and executing, please give a direct link to my work when you are inspired by mine. Thanks for understanding........:-)

Thursday, October 25, 2012

Jhumka gira re

Hello All,

After forever, I am back! With nothing big but something I had been thinking about for ages.......being from Bareilly and not having made jhumka so far was not going down well with me! :D So, I finally made time to try one out. I literally picked up whatever came in front of me to make this one..........feedback welcome :)



Happy Quilling

Pritesh

PS: If my posts inspire you to create something on similar lines, I feel highly flattered. But please, do respect the effort I take in conceptualizing and executing, please give a direct link to my work when you are inspired by mine. Thanks for understanding........:-)

Tuesday, October 2, 2012

Making paper quilled/punch jewellery water resistant

Dear All,



I get so many queries about water-proofing paper jewellery (in spite of posting a detailed procedure in Indian Quilling Guild) that I decided to write this post. I would've loved to post a video/photo tutorial but it may have to wait a while.

For quillers in India specially, things like Diamond Glaze are not easy to come by. So, here goes the process (specific to materials available in India, I'm sure quillers in other countries will be able to find analogues easily).

Step 1: Making the jewellery itself. It is an important step for making jewellery sturdy. You'll need to use your judgement in gauging whether the piece is sturdy. I am hopelessly obsessed with the jewellery being able to withstand stress (like my son pulling at my earrings). Make the piece "sturdy" before you think of water-proofing.

Step 2: Give a coating of a "water-soluble glue". It should at least be water soluble when wet. You can use Fevi-Gum (available for Rs. 5 in ANY stationery shop). Make sure you coat all crevices etc properly. Synthetic bristle brush works best, camel hair brush is a little difficult to handle due to variable length of the hair. Allow this to dry properly. I am biased towards Fevicryl Hobby Ideas Fabric Glue. It's more expensive but I prefer its consistency compared to Fevi-Gum (which I find more runny). But it's purely a personal preference.

Only glue coating is not likely to make the jewellery water-resistant as PVA (poly vinyl acetate) glue "swells" when in contact with water. It looks ugly to say the least, and the jewellery will be disfigured forever. Fevicryl Hobby Idea Fabric Glue however, is OK by itself. It still remains "sticky", so I won't recommend glue layer alone (unless you want all your paper jewellery to become ONE single lump, all earrings mating with each other! :D

Step 3: This is a crucial step and takes most time (not for coating, but for drying). Use a good lacquer varnish. My recommendation is Asian Paints Touch Wood. But practically any varnish should do. Again, use a synthetic brush to coat the jewellery. You WILL see some discolouration but don't worry, if you've done the glue coating properly, this discolouration usually vanishes after drying. Varnish needs overnight drying, so plan properly. If you are enthusiastic about a glossy finish, you can put 3-4 layers (which means coating them for 3-4 days). It lends a pretty (not my personal favourite still) glossy finish that is harder as well.

Please prepare properly for handling varnish (gloves if you are particular about not getting your hands smelly, I personally don't care). Work in a well ventilated (preferably with an exhaust fan) fan place. Use some organic solvent to clean the brush (kerosene works fine for me). Keep a scented hand-cream handy, you'll need it to get rid of the strong smell varnish will give to your hands. Try tying a wet cloth over your nose, organic solvents, when inhaled, are BAD for women of reproductive age (please take my word for it, I'm a PhD in Chemistry and I specifically know the side effects)......

I hope this is comprehensive enough. So, if you know someone who wants to how to make the jewellery water-resistant, please share this link. It is very difficult for me to write individually to people who ask. I end up feeling bad not replying........

For those who want images and details of the waterproofing material, here is the link

Happy jewellery making :)

Pritesh

PS: If my posts inspire you to create something on similar lines, I feel highly flattered. But please, do respect the effort I take in conceptualizing and executing, please give a direct link to my work when you are inspired by mine. Thanks for understanding........:-)

Sunday, August 26, 2012

Midas Touch

Hello All,

I don't know how many of you have this tick, but I sure do. I have this truck loads of stuff that sometimes gets forgotten and relegated to a corner. And then, one fine day, I find it and go berserk! I try every possible craft with it1 :D Today's "refind" was my gold pen which is a treasured possession from Stockholm. Since I was anyway considering doing a pair of earrings with a terrific finish (after I found someone's picture on the Net where the design was way toooo similar to what I had made but only the finishing was 100 times better). The "Midas Touch" pen came in handy and I painted the town (ok ok, just the earrings :D) gold.......so here goes: Midas Touch :)



And ya, I was asked why I always have that one strip surrounding my entire earring? Reason: Sturdiness. I am a very mechanical engineering obsessed crafter. My earrings have to have that sturdiness element. Just a tight coil on top will come off in a snap and I can't bear to spoil my hard work because of that ONE weak link :)

Happy Quilling

Pritesh

PS: If my posts inspire you to create something on similar lines, I feel highly flattered. But please, do respect the effort I take in conceptualizing and executing, please give a direct link to my work when you are inspired by mine. Thanks for understanding........:-)

Friday, August 24, 2012

Best out of waste :)

Hello All,

Just as I started making an attempt to declutter by impossibly cluttered desk, there were these bits left from punching that I didn't have the heart to throw away. After a bit of thinking and analyzing, this is what I came up with, a simple pendant. I've used the leftovers from a MS punch I used for something else and just added one droplet bling in the centre. Let me not encourage you to keep your desk cluttered for coming up with ideas but don't throw those punched bits away (be a hoarder :D)..........put them to use :) Just as I was making this, I was reminded of this series that used to be aired on DD National, called Best Out of Waste :) I hope I am making the best use of waste :)



Happy Quilling

Pritesh

PS: If my posts inspire you to create something on similar lines, I feel highly flattered. But please, do respect the effort I take in conceptualizing and executing, please give a direct link to my work when you are inspired by mine. Thanks for understanding........:-)