SBQ for June...2012???

WOW has this post been sitting around for a while!!  Over two years.  Yikes!  (Yeah, so now I am just randomly pulling up drafts of posts and finishing them up.)  Still a good one though, and showcases some of my favorite pieces.

Also, since there seems to be some interest in SBQs, not to mention they're a great "blog prompt" when you don't know what to write about, I think I'm going to start something up in the fall with monthly questions.  More on that later.  For now, back to um.... 2012.

June 2012:  Do you stitch patriotic/national pieces (or maybe just pieces that represent a specific place)? What's your favorite? (submitted by CinDC)

While there are some very lovely "American" and "USA" pieces out there, they generally don't attract my attention for stitching.  I do, however, have more than a few pieces that represent specific places in the US, mainly lighthouses, such as this one from The Design Connection (though I must confess it was stitched by Mr. Sweet Pea).

NOTE: I believe this design is now OOP.  I can't find it in any of the stitching shops, only on eBay.

Or this piece, Maine Fishing Village by Seguin Designs, that we modified as a birth sampler for our son.  Without a doubt, if we were to chose our favorite places in the world, New England in general, and Maine in particular would be high atop that list, so we have several lighthouse pieces in our collection.

I was also gifted with Blue Ribbon Designs Americana Panorama, which is waiting to be stitched.  So yes, in that respect, we do purchase and stitch what could be considered national pieces for the US

I also tend to find myself attracted to those pieces that reflect my Irish heritage, such as this one from The Sweetheart Tree, Tangled Shamrocks, and my husband has honored his German heritage with a few pieces as well.

Wedding and Anniversary Gifts

Last week, we celebrated our 10th anniversary, and wedding and anniversary pieces have been on my mind.  My in-laws' 50th anniversary will be coming up in the not too distant future, so I've been thinking about something we could stitch for them.  It's also traditional wedding season - June is still big for weddings, right?  (Although it seems like October is pulling ahead in terms of popularity.)  

I've already shown you some of the Bent Creek pieces I've done for weddings in a previous post.  I thought it would be fun to go back and look at some of the pieces I've stitched as wedding gifts, or on occasion, anniversary gifts because I can't get my act together in time for the wedding.  And in the case of this first piece, a Christmas gift because we didn't even stitch at the time the wedding took place.

I like to tie what I stitch into the event whenever possible.  With weddings that don't have a specific theme, I look to the the time of year, location, even a special reading or a song from the ceremony for inspiration. 

This is a piece I modified from a Leisure Arts leaflet called Marriage Keepsakes.  I had stitched the pattern once before, as designed.  This time, I changed the text to a poem my BIL and SIL used on the bookmark favors for their wedding.  They didn't have a theme for their wedding, so I drew on the colors they used, blue and silver.

Another couple I stitched a gift for also didn't really use a theme for their wedding, so I used this Bucilla kit, "To Love and To Cherish" as a gift for my far away friend.  She and I met online while we were planning our weddings, and have remained close ever since.

I changed the pink flowers to a peachy color so they would look more like the peach colored carnations that the bride chose for her bouquet and their decor.

I've also designed pieces completely from scratch by using motifs from several books I own.    This is where cross stitch software comes in VERY handy.  I have used PC Stitch for several years with great results, though I must admit that once I upgraded, some of the functions I could do quickly and easily became more complicated, and I am still muddling my way through some of the software.  (I want to go back to the old way of doing things for some functions, and it's just not possible.

For my friend Kelly (also a fellow wedding planning site buddy), I created a piece using the Song of Solomon quote they used for their invitations.  Red roses were a big part of their fall wedding, so I incorporated that into the piece as well.  The rose motif in the middle was tricky - I wanted something symmetrical - and ended up playing with a charted rose and its mirror image to get the look I was going for.  (Names are intentionally blurred for privacy)






One of the more unusual pieces I've done was for a couple that had marigolds and cicadas for their wedding theme.  Definitely not your typical wedding theme!  In 2004, the cicadas of Brood X (the largest group of periodical cicadas that emerge every 17 years) were coming out.  The marigold part was easy - I tapped the same flower book I used for the roses in the previous piece, but the cicadas proved to be a challenge.

I ended up stitching a simple piece, and worked the cicadas into the framing.  I found some line art drawings and printed them on velum paper, then used an Exacto knife to trim away the excess and cut out the middle.  I mounted the paper to a store bought mat with spray adhesive.  It turned out better that I expected and made for a very interesting wedding record.  Working with printed velum and a store bought mat can be tedious, but it adds a whole new level of versatility and flexibility to framing pieces.


On a much more traditional note, I used a reading that was very important to the couple to stitch this Book of Ruth Sampler by Design Connection (now OOP).  The names were charted out on paper, pre-stitching software, and I would definitely move some things around were I to stitch it again.

And the last piece I have for today should be familiar to many of you, as it's Blackbird Designs I Thee Wed.  It was a commissioned piece, stitched for my cousin to gift to a friend.  You can find the details on the piece here.

 Do you stitch gifts for weddings, anniversaries or other significant life events?  How do you choose what you will stitch?  Do you have any go to designers or charts that you've stitched more than once (like my fondness for Bent Creek's I Do)?

Pemaquid Point

Design Connection - Pemaquid Point
Stitched over 2 on 28 ct. Pewter using recommended DMC threads

Pemaquid Point is in Maine, and is one of our favorite places. This pattern was based on a view of the light from either the rocks or the water - the lighthouse sits on a rocky cliff overlooking the ocean. This is the view you get driving up to it:

We love going here because there's an awesome little gift shop - the Sea Gull Shop - with a tiny attached restaurant that serves the best blueberry pancakes you've ever had. And the dining room is a screened in porch overlooking the ocean. You just can't ask for a better breakfast.

DH just finished this piece last night. I think he started it sometime over Christmas, and since he's not as scattered as I am when it comes to stitching, this was his only focus (which explains how he got it done so quickly!) We decided it would look nicer on the bluish colored fabric instead of the recommended white, and I think it turned out GREAT!

It's been a while since I've posted some pictures

I've been organizing and cleaning up some photos this morning, so I thought I'd share a few.

First up is the piece I finished for my BIL and SIL's Christmas gift. DH framed it up for me and we gave it to them on Christmas morning. My SIL was especially touched - she teared up a little when she opened it (hopefully it meant that she liked it!)

Next up is Nautical Dreams, which DH also framed before we left for Christmas, but I just sent it out yesterday. It's on it's way to Colorado, so I hope it doesn't get stuck in any snowstorms. I also sent along a Boston Harbor ornament I stitched up from a Treetrunk Designs leaflet. I like to give ornaments as gifts to new babies to start their collections. Boston is very near and dear to the heart of my friend (the baby's mom) and I am sure it will become very important to her daughter as well.


And finally, something my DH stitched for his mom for Mother's Day. It's a Dimensions kit she picked out when they came to visit us a while back, and we just forgot to take a picture of it before we gave it to her. DH also framed it for her, and I think he did a great job. It's now hanging in the entrance to her kitchen.

And I know I promised Kim some pics of my progress on Princess, but I messed up the ones I took and have to take new ones, so they'll be coming later.

A little more progress

I made some additional progress on my Nautical Dreams piece. I'm working on the bottom section now. You can start to see the lighthouse in the bottom section - it kind of reminds me of the Annisquam Light on Cape Ann in Massachusetts. It's one of the reasons I chose this piece - the new baby's mom went to school in Massachusetts and misses the East Coast so much, she chose the nautical theme for the nursery. I thought it would be nice to have a reminder of one of her favorite places in her baby's room.

Speaking of lighthouses, here's a peek at my unfinished lighthouse ornament for our tree this year. It's of the Sea Girt Lighthouse in New Jersey. I originally picked it because I didn't think I'd be able to find an ornament of the lighthouse (we try to find ones of the lighthouses we've been to), but when we were there a few weeks ago, lo and behold they had some for sale. So I bought one, but I'll still finish this one for the tree as well.

Also a few minutes from being completely finished is this bookmark. I did the bookmark following this tutorial, and I have to say - NEVER AGAIN! It certainly made a good looking bookmark, but it was kind of a pain to make sure everything was lined up properly before I stitched it closed (inside out). Turning it right side out was more difficult than I anticipated, and the bookmark is thicker than I'd like it. I'm also not sure I want to put all that work into something and end up ruining it or getting it dirty. I'm still thinking of a better way to do bookmarks, as I'd like to do one for my sister-in law eventually.

I did a nun stitch on the end and fringed the remaining threads. Since I didn't want a contrast on the edges, I used white thread to match the aida cloth.

My Current Work in Progress

My friend Christine and her husband just had their first child, Alexa. Since her nursery is a nautical theme, I picked this piece from the Design Connection. (I noticed I have quite a few Design Connection pieces in my stash.)

I'm personalizing the piece with some modifications. The first line of text in the piece will be changed to the baby's first and middle names, and the second line of text will be her birthdate. In the space below the third section, I'm able to fit in her weight, length and time of birth.

It's a LOT of stitching, but there are large sections of simple cross stitching in one color, so that makes it easier. I've started by doing half crosses in those large sections, and then I'll come back later and fill in the other half of the stitch. I think it will be really cute when it's done.