Showing posts with label Frameworks Die - Lattice. Show all posts
Showing posts with label Frameworks Die - Lattice. Show all posts

Sunday, 22 June 2014

A summery greetingcard.




We have arrived at Midsommer Eve which is hugely celebrated here in Sweden and this is our beloved lightest period of the year. It's a beautiful time!
I have several friends who celebrate a birthday just about now I wanted to make a few birthday cards :-)


I started out with a card base and stitched a green panel to it.
On top I layered a piece of netting and two pices of lattice in pink. Then I die cut and  added an oval in the center. To finish off I added several flowers; handmade and from the store, as well as some seambinding.


These leftovers from different packages of flowers have been calling my name to get used. I think next time I'll make a mini album with them, but today they served as cardbases.


Sizzix frameworks die lattice
Sizzix Big Shot starter kit
Sizzix framelits die set ovals
Sizzix Tattered florals Bigz die

Other from Papirdesign

                                  --------------------------000-----------------------------
Nu firar  vi midsommar här i Skandinavien och vi tycker det är underbart med allt ljus vid denna tiden. En stor högtid för oss i norr! Dessutom känner jag många som firar sin födelsedag nu så jag kände för att göra några kort.
Jag började med basen och sydde fast en grönt panel sedan lite lager på lager med tyg, framework  lattice och en oval. För att dekorera la jag till några handgjorda och köpta blommor och en rosett.

Dessa bakgrunderna från olika blomsterpaket har kallat på min uppmärksamhet ett tag. Idag blev det ett kor5t, men nästa gång blir det nog ett mini album.
Detta använde jag:
Övrigt från Papirdesign

Sunday, 15 June 2014

Bentes Flowery Sunday post



Hello and happy Sunday to you!!

Here in the south of Sweden we're enjoying a beautiful weekend and I hope the same for you wherever you are!!

My daughter has been doing a major cleaning and sorting of her room and we found loads of loose pecils laying around. I decided to decorate a wooden pencilbox that I've had for along for her to keep them in.

This is how it turned out:

 I used a frameworks die for the lattice work on my box. 
As you may see my piece of lattice is double the length and yet there is no joint to be seen.
That is because I cut out my lattice on a double piece of paper. I just make sure the die does not cut the very end of the pattern and that gives me a nice long piece. Look closely where it says 'here'.

 And this is the finished long piece. The middle is where it says 'here'.

And some more close ups:



 Sizzix products I used:




Other products are by Papirdesign.

------------------------------------------------ooOOOOOOOOOo-----------------------------------------------


He och trevlig söndag till er!


Här i södra Sverige njuter vi av en vacker weekend och jag hoppas ni gör det samma var ni än är!
Min dotter har haft storstädning på sitt rum och vi hittade en hel hög pennor, som jag bestämde mig för att ge ett hem. Jag har haft ett odekorerat pennskrin i trä liggande och nu var det lämpligt att plocka fram det.

Så här blev det:

Jag använde en frameworks die för 'lattice' mönstret. Som du ser så har mönstret blivit längre än själva die'en och där är ingen skarv. Detta beror på att jag placerade ett dubbelvikt papper på min die så att den inte skar riktigt ända ut på motivet. Man sparar ett par millimeter som gör att motivet hänger ihop. Titta på bilderna där det står 'here'.


Friday, 2 May 2014

Felt die cut accents on your cards!


Hello everyone! Karola here with new card inspiration created using our fantastic Sizzix dies. Today I would share with you a simply idea for adding texture and some felt or fabric accents to our cards. 
As you probably know, lots of Sizzix dies are designed to cut not only the paper or cardstock, but also a wide range of thicker materials, such as: cardboard, EVA foam, felt, fabric, magnet, leather etc... This kind of dies are: Bigz, Frameworks, Originals, Movers & Shapers, On The Edge and more. In my last card I used a sheet of polyester felt to cut out lattice pattern using Frameworks Die - Lattice. Framework dies are designed in a very useful way, it's means that you can use the cut outs as repeating pattern. I think this way is amazing, because you can combine a few of cut outs into one fantastic background. This time I cut out lattice pattern from the felt 2 times, then I added a stitch using a sewing machine, adding at the same time some more texture and interesting look to my card. 




Sizzix supplies used:

  1. Prepare a sheet of polyester felt (acrylic felt may be too soft and not good for this project). Cut out 2 pieces of lattice using Sizzix Frameworks Die - Lattice.
  2. Apply liquid glue on the cut outs. Do it carefully, remembering not to add too much glue.
  3. Adhere two pieces of felt lattice cut outs onto your card background (not card base!). I  have chosen kraft cardstock (13 x 13 cm) as a card background and white cardstock on my card base (folded card size: 14 x 14 cm). Put lattice felt pieces as a repeating pattern on the centre of your card. 
  4. Sew the pattern using straight stitch and don't hurry with it. Make it carrefully and slowly, following the felt lattice pattern. You can use a sewing machine as I did or use thread and needle to make it by hand.
  5. Sew the whole lattice pattern and - if you want - add more stitches. I added 2 straight stitches on the left and the right side of my card background.
  6. An additional idea: If you like fussy cutting - like me - you can use the Susan's Garden Tool Kit for modeling your fussy cut outs, such as flowers or leaves. The tools from this amazing kit are very helpful not only while working with Susan's Garden dies, but also in lots of other creations, just try it!
  7. Decorate your card as you want, trying not to hide your felt pattern too much. As you can see, I added also a butterfly and the heart, that I cut out from the same sheet of felt and using dies included in Big Shot Starter Kit (Powder Blue & Teal).



Thank you for visit us today! Have a wonderful weekend! 
~~ Karola ~~ 


****************************

Witam serdecznie polskojęzycznych fanów Sizzix! Dziś przynoszę ze sobą kolejną kartkową inspirację z wykorzystaniem fantastycznych wykrojników Sizzix! Moja dzisiejsza praca to pomysł na dodanie ciekawej tekstury do kartki, wykorzystując kawałki filcu lub tkaniny. 
Jak prawdopodobnie wiecie, Sizzix ma w swojej ofercie mnóstwo wykrojników, którymi można wycinać nie tylko papier i brystol, ale także szeroką gamę grubszych materiałów, takich jak: filc, tkanina, pianka, tektura falista, arkusze magnetycznej folii, skóra itp.
Wykrojniki tego typu to m.in: BigzFrameworksOriginalsMovers & ShapersOn The Edge. W mojej dzisiejszej kartce wykorzystałam arkusz poliestrowego filcu oraz wykrojnik Frameworks Die - Lattice aby pozyskać filcową, ażurową siateczkę. Wykrojniki Frameworks zostały zaprojektowane w bardzo użyteczny sposób, to znaczy, że wzór można wyciąć kilkukrotnie i połączyć w jedno większe tło. Uważam, że to naprawdę świetny sposób na tworzenie pięknych, sporych ażurowych teł. Tym razem wycięłam wzór siateczki z filcu dwukrotnie, połączyłam 2 części w jedno tło, a następnie wzór przeszyłam za pomocą maszyny do szycia, dodając w ten sposób nieco więcej tekstury i ciekawego akcentu do mojej kartki. 

Wykorzystane produkty Sizzix:
  1. Przygotuj arkusz filcu poliestrowego. Filc akrylowy mógły okazać się zbyt miękki i niezbyt dobry do tego projektu - mógłby się rwać). Wytnij dwukrotnie wzór siatki za pomocą wykrojnika Frameworks Die - Lattice.
  2. Nałóż płynny klej na wyciętą filcową siatkę. Staraj się robić to ostrożnie i pamiętaj aby nie dodawać zbyt dużo kleju. 
  3. Przyklej dwie części siatki na tło kartki (nie na bazę kartki!) umiejscawiając siatkę po środku tła i łącząc ze sobą dwie części w jedno spójne tło. Ja wybrałam brystol typu kraft na tło mojej kartki (13 x 13 cm) oraz biały brystol na bazę kartki (wymiary złożonej kartki: 14 x 14 cm).
  4. Przeszyj filcowy wzór ściegiem prostym i absolutnie nie spiesz się podczas tej czynności. Szyj po wzorze ostrożnie i powoli. Możesz użyć maszyny do szycia, tak jak ja, lub przeszyć wzór ręcznie igłą i nitką. 
  5. Przeszyj cały wzór oraz - jeśli masz ochotę - dodaj więcej ściegów. Ja dodałam podwójny prosty ścieg z dwóch stron mojej kartki. 
  6. Dodatkowy pomysł: jesli tak jak ja, lubisz precyzyjnie wycinane elementy z papieru, możesz użyć narzędzi z zestawu Susan's Garden Tool Kit  do wymodelowania swoich wycinanek, takich jak kwiatki i liście. Narzędzia z tego zestawu są bardzo przydatne, nie tylko podczas tworzenia przestrzennych kwiatków z serii Susan's Garden, lecz także w innych projektach - po prostu spróbujcie! 
  7. Udekoruj swoją kartkę tak jak chcesz, starając się jednak niezbyt mocno zakrywać filcowy wzór. Jak widzicie, ja dodałam jeszcze kilka filcowych akcentów - motyla i serce wycięte za pomocą wykrojników dołączonych do zestawu startowego maszyny Big Shot - Sizzix Big Shot Starter Kit (Powder Blue & Teal).

Dziękuję za dzisiejsze odwiedziny na naszym blogu i życzę Wam wspaniałego weekendu! 
~~ Karola ~~ 

Sunday, 13 April 2014

Sunday post from Bente 'My Piece of Heaven'



Hello, I hope you are all having a lovely week end so far. 
I have a new page to share with you and of course I have used some of my new gorgeous Sizzix dies for it!


Here are a couple of shots I took along the way:

After I sprayed some different shades of mist on my page I look for the right placement 
for my diecut pieces.


Then I decide where my photo should go and start adding different kinds of embellishments.


And now a few closeups of my finished page:




 I used one of the new and funky Life Made Simple sets to cut the small tab. And the Tim Holtz rosette die is one of my favourites.



Sizzix products used for this page:


Other products used:

Scraps of Elegance April kit 'Flutter ':
Papers from Bo Bunny, collection 'Primrose' 
 Prima (Talia Tenacious) 
Petaloo ( Darjeeling Wild Blossom,-soft green, Botanical Blooms X 4 -grey)
Heidi Swapp colorshine Mint Green
October Afternoon mists (Icebox, Miss Mary Mack)

----------------------------------------------------------------------------------------------------------------------

Hej, jag hoppas att ni alla har en härlig helg hittills.

Jag har en ny layout at visa, och jag har naturligtvis roat mig med att använda en del av 
mina nya fina Sizzix dies tillsammans med den läckra turkosa Big Shot maskinen.
 Här är ett par bilder jag tog på vägen:
Efter att jag sprutade några olika nyanser av mist på min sida provade jag ut rätt placering  
för mina diecut bitar.
Sedan bestämmer jag var mitt foto ska och börja lägga till olika typer av dekorationer.
Och här är några närbilder på min färdiga sida. 
Jag använda ett av de häftiga nya setten för Project Life typ av scrapbooking. (Life Made Simpl).
Tim Holtz söta strip die för att laga rosetter är en av mina favoritter!


Sizzix produkter jeg har brukt på min sida:


Andra produkter jag har brukt:

Scraps of Elegance April kit 'Flutter ':
Papper från Bo Bunny, collection 'Primrose' 
 Prima blommor (Talia Tenacious) 
Petaloo blommor ( Darjeeling Wild Blossom,-soft green, Botanical Blooms X 4 -grey)
Heidi Swapp colorshine Mint Green
October Afternoon mists (Icebox, Miss Mary Mack)