Are you looking for a tutorial to make a quick baby quilt? Would you like to make donation quilts but struggle to find an easy pattern? Hopefully this tutorial will provide you with some options.
The Flexi Strip concept is a "flexible" quilt pattern that takes on a different appearance by simply changing one strip of the quilt...the Flexi Strip Panel. If you look at the diagrams below, each quilt consists of three Flexi Strip Panels, four sashing strip units, and a top and bottom border. Pretty simple right?
The Basic Flexi Strip Quilt uses a focus fabric in the Flexi Strip Panel and a coordinating fabric in the sashing strips. It can be sewn together rather quickly and is a basic vertical strip quilt.
The Basic Flexi Strip Quilt
The Variable Flexi Strip Quilt uses a variety of flannel, denim, and cotton quilting fabrics to form the Flexi Strip Panel. This quilt takes on a scrappy, yet modern appearance. .
The Variable Flexi Strip Quilt
The I Spy Flexi Strip Quilt uses 27 different 5" squares in the Flexi Strip Panels and creates a fun, light-hearted quilt for little ones.
The I Spy Flexi Strip Quilt
Before you begin your project you will want to decide which style of quilt to make. All the quilts in this series follow the same basic instructions except for the assembly of the Flexi Strip Panel.
Materials
Choose One Option:
Basic Flexi Strip Panel - 1/2 yard cotton fabric cut into (3) 5" strips
Variable Flexi Strip Panel - (27) 5" blocks cut from a variety of nine coordinating fabrics.
I Spy Flexi Strip Panel - (27) 5" blocks cut from a variety of I Spy fabrics
Fabric Requirements for Each Pattern
Sashing Strips - 1/3 yard dark fabric cut into (4 ) 2 1/2" strips
3/4 yard light fabric cut into (10) 2 1/2" strips
Backing - 1 1/3 yard fabric
Cotton batting - 48" x 42"
Binding - 1/3 yard fabric cut into (5) 2 1/2" strips
Heavy Spray Starch
Low tack painter's tape
Basic sewing supplies
Finished quilt size - approx. 44" x 37"
Instructions
Step 1 - Choose One of the Following Options
For the Basic Flexi Strip Panel - Cut (3) 5"strips to 40" in length being careful to remove selvedge edges. Proceed to Step 2.
For the Variable Flexi Strip Panel - Cut (27) 5" blocks from coordinating fabrics. The sample quilt was made with a variety of nine different flannel, denim, and cotton quilting fabrics. Arrange blocks until you find a layout you like. Sew together with a 1/4" seam allowance to form three rows. Proceed to Step 2.
For the I Spy Flexi Strip Panel - Cut (27) different 5" blocks from brightly colored and/or I Spy cotton fabrics. Arrange blocks until you find a layout you like. Before sewing, you may want to mark each row to help keep your blocks in order. Sew together with a 1/4" seam allowance to form three rows. Proceed to Step 2.
Step 2
From dark fabric, cut sashing strips into (4 ) 2 1/2" strips. From light fabric cut sashing strips into (10) 2 1/2" strips.
Step 3
Spray sashing strips with heavy spray starch and press with a hot iron. Please note that for this project, heavy spray starch is
very important. It will help to eliminate wrinkles and keep fabric from stretching...so be generous with the spray starch! With right sides together, pin 4 dark sashing strips to 4 light sashing strips and sew with a 1/4" seam allowance. Note that strip lengths may vary and will be trimmed once assembled.
Step 4
Press seams with a hot iron being careful to "press" and not stretch the fabrics. At this point I usually add another dose of the heavy spray starch and press the seam toward the darker fabric.
Step 5
Pin four remaining light fabric strips to the four Sashing Strip units, and sew together with a 1/4" seam allowance. Press seams toward darker fabric. At this point you will want to double check the length of your flexi strip panel.
For the Basic Flexi Strip Quilt- Evenly trim both ends of the Sashing Strip unit so the unit measures 40" in length. Proceed to Step 6.
For the Variable Flexi Strip and the I Spy Flexi Strip quilts- Depending on your accuracy in both cutting and sewing, the length of the flexi strips may vary between 40" and 42". You may want to measure all three of the flexi strips to get an average length
or make seam allowance adjustments if necessary. The average length will be the number you use when trimming the Sashing Strip unit. Evenly trim both ends of the Sashing Strip unit to the same length as your flexi strips. Proceed to Step 6.
Step 6
Pin each Flexi Strip Panel to a Sashing Strip unit and sew together with a 1/4" seam. You may notice in the photo below the blue tape to the right of the fabric. I find low tack painter's tape to be quite helpful in the quilting process. It can be placed on your sewing machine bed to mark a desired seam width and easily be removed with no residue.
Step 7
After a dose of spray starch, press seam toward the darker fabric on each section. Sew remaining sashing strips together. Press seams toward darker fabric. With right sides together and matching seams, trim quilt top to 40" in length.
Step 8
Pin remaining sashing strips to the top and bottom of the quilt and sew with 1/4" seam. Placing the seam-free sashing strip as the bottom layer will make it easier to flow across the sewing machine.
Step 9
Press seam away from the top and bottom strips. Press the completed top on the back side, carefully removing stray threads. Press the front of the quilt making sure all seams lay flat.. and don't forget to use the spray starch:)
Step 10
Square up the quilt top. If you lay the fabric on top of a cutting mat, you can match up the top and side edges of fabric with the lines on the cutting mat. Next, place a large square ruler on top of the quilt. This will indicate how square your quilt is and how much fabric needs to be trimmed away. You will want to square up all four corners.
Step 11
Press quilt backing. Use your favorite method to baste the quilt and prepare it to be quilted.
This is the method I often use when I baste my quilts.
Step 12 - Quilting Options
Straight-line quilting
Straight-line quilting is usually done with a walking foot. This style of foot is designed to evenly feed the fabric as it passes across the bed of the sewing machine. I like to use painter's tape as a guide for straight-line quilting. The same strip can be easily repositioned and used many times. It also comes in a variety of sizes. The tape you see in the photo below is 1 1/2" wide.
Swirls and Pebbles
I wanted to try something different and expand my machine quilting skills on this quilt. Although it was a great learning experience, it was very time consuming. If you are planning to make a donation quilt, I would skip this concept. Although I really like the final result, I'd rather make more quilts instead of spending so much time quilting one.
Stippling
Once you get the hang of stippling, you can easily finish quilting a small quilt in a few hours. It is a great foundational skill to build upon. It takes a lot of practice, but is well worth the effort to learn.
Step 13 - Trim Away Excess
Once your top is quilted, you will want to square up the quilt as described in step 10. Trim away excess batting and backing from the outer edges of the quilt.
Step 14 - Binding
Cut (5) 2 1/2" strips for binding. Use your favorite method join the strips together and to attach binding to the quilt.
I'm always looking for a better method to bind a quilt. The other day I ran across a wonderful tutorial on You Tube by the Missouri Star Quilt Company called
The Ultimate Quilt Binding Tutorial. This tutorial may be helpful for those who are struggling with any binding issues.
To view additional quilts made with the Flexi Strip tutorial
please click here.
If you end up making a quilt using the Flexi Strip concept I'd love to hear from you! My prayer is that many donation quilts will be made as a result of this pattern.
May you always Sew in Peace!
Sandra