Galentines Cards, Done

 Time to use those cute #Gallentinesday stickers I made using Cricut Design Space.  I used 2024 December’s Sheetload of Card Sketch to bring these cards together.  The patterned paper is from a Recollections Paper pad I thrifted back in California.  I love using the Sheetload Sketches.  It is always a win.  I make multiple cards, I use up my paper (of which there is a lot), and the work of figuring out all the cutting is done for me.  You can’t beat that.

To see the video of the stickers being created please head here.

To see the video ofthis card being created please head here.

Thank you for visiting my blog today. I hope you find inspiration here. I am passionate about this hobby and love sharing my cards with all of you. Hope to see you again soon. If you would like to support me, you can find the 'buy me a coffee' link on the right-hand side of this page. If you wish to support my channel by purchasing a card or two, please check out the commissions section of my Buy Me a Coffee link or visit my Etsy shop. Have a great day! Happy Crafting!

Personalized Notecards Using Cricut Design Space Images

I had a co-worker I wanted to make some personalized cards for.  Cricut Design Space was just the place to go to get the look I wanted.  I kept this pretty simple since I wanted to be able to mass-produce these for others.  You can have these personalized for a great gift for someone.  

Thank you for stopping by my blog today.  I hope you find things that inspire you.  I love this hobby so much, so I enjoy sharing my cards with all of you.  Hope to see you all soon.  If you wish to support me, please see the buy me a coffee link over on the right-hand side of this page.  If you wish to support my channel by buying a card or two, please see the commissions section of my Buy Me a Coffee link or head over to my Etsy shop.  Have a great day!  Happy Crafting!

 

Cricut Heart Background-Cricut Design Space

 To make some simpler cards, I tend to put my Cricut Explore to work.  I found this lovely heart background in Cricut Design Space.  I knew it was destined to be one of my Valentine’s cards this year.  I could have done so many techniques, but I kept this one super simple.  I found a heart background paper in my stash to layer behind it.  I topped it off with a print and cut sentiment also that I found in Cricut Design space.  A few sequins and a dash of a glitter pen and I called it done.  What Valentine’s projects have you been up to?  Let me know in the comments section.

To see the video of this card beingcreated please head here.

Thank you for stopping by my blog today.  I hope you find things that inspire you.  I love this hobby so much, so I enjoy sharing my cards with all of you.  Hope to see you all soon.  If you wish to support me, please see the buy me a coffee link over on the right hand side of this page.  If you wish to support my channel by buying a card or two, please see the commissions section of my Buy Me a Coffee link or head over to my Etsy shop.  Have a great day!  Happy Crafting!

 This turned out better than I expected it to. I created all the elements for the sunflower and butterflies in Cricut Design Space. I did add a bit of shading using some inks, then put the card together cutting off a few of the leaves of the flower. Then added the butterflies to look as if the flower was turning into butterflies. I added a simple sentiment to leave the focus on the image. You can follow this link to the Design Space Mat if you want to try this yourself. You can also, go here to watch the 1-minute video of how I put this card together.

Let's Make a Card Using: Twine, Red/Yellow, Spicy, and 3x3 as the elements

 

Thanks to Crafty Roulette on YouTube, I have another card put together. The elements that needed to be used this week are in the description. Below I will have a link to Crafty Roulette's YouTube channel in case you want to join in this coming week. I used images from Cricut Design Space for my image. I didn't have anything that would work in a physical stamp. I printed this out and then set to work making it a 3 x 3-inch panel. I colored the bottle and label with the colors red and yellow. For the twine I just gathered it up in the corner...now bows this time. The banner I hand cut using Cricut glitter cardstock. I love that stuff. It is no shed and the perfect weight. I had to include some gold flat back gems of course. Here is where you can find Crafty Roulette here on YouTube.

 I have a quick video putting this card together if you want to check it out on my YouTube channel here.

You can use Vinyl on your Cards?

 I forget I can use vinyl on my cards. When @jaxwritesongs put out her newest song "I know Victoria's Secret", I just had to make a card. I knew what I wanted to have on the card so I turned to the medium I knew would be the easiest for this card, vinyl. That meant hauling out my Cricut which has not been used in a bit. Everything I needed I found on design space. I love it when that happens. I have put the link here in case you want to make your own card.

I do have a short video about this card if you want to check it out here.

Using those Scraps and Adding Gilded Flakes

 One of my resolutions this year was that I would make sure to use scraps from my scrap bin one card a month at the minimum. Here is February's card. I used some scraps that measured about 1 1/2 inches by 5 1/2 inches. I placed them on a piece of cardstock covered in double-sided adhesive. I left gaps on purpose and added gilding flakes to the rest of the exposed adhesive. I added a few other elements including a sentiment I made using Cricut Design Space. It was cut out using my Cricut Explore. This only took a little time. So, I ended up making 3 more cards. To see those beauties you can see them below Hope this inspires you!

Split Card Desing = 4 CARDs!

 I have done the split card design using half of the 8 1/2 x 11 inch card stock....but nothing says you can't use the whole thing.  Then you have 4 cards done in one sitting.  This worked out so well.  Thanks to Cricut design space and my Cricut Explore these beauties were put together in about 15-20 minutes.  Hope this inspires you to make a few cards today!

Check out the video here to see how I put these together.

Inspiration from Everywhere: Cricut Design Space Card

 

To see this card come together head on over to my YouTube channel here.  It is a very short video I put together after watching one of my favorites over there on TikTok @thatnursemissy. The visual was so vivid while I watched her video. I knew I had to make her a card with plenty of lemon images. With images from Cricut Design Space and some digital stamps from Lemon Elf Studio. Can't wait till she sees my TikTok and she gets this card.

Printable Vinyl Used on Cards

 Critter Cards Anyone? 🐷🐘🦨 I have had a few sheets of critter stickers I made using #cricutdesignspace and my #cricutexplore hanging out in my stash for some time. It was time to do something with these cuties. I have only included all of the cards I made using these stickers made with printable vinyl below.

Let's Use up Some Washi!

 

So I have been doing some budget 💵friendly cardmaking ideas over on TikTok. This one I found on Pinterest of using Washi tape to create a frame then adding your image/sentiment in the middle.

You all know you have too much washi tape....so get those rolls out. This is a great way to use some of it up...and yes if you finish a roll of your favorite washi I promise there will be other washi tapes waiting in the wings to become your favorite. Stop the hoarding! ( I am not yelling at you I am yelling at myself. 😆) I have made several of these, some with all Dollar Tree items, others with things from my stash that I am trying to use. This particular one is a sticker I made with my Cricut Explore on Design Space. Let me show you the rest of these...I think they are so cute!

Cricut Corner: Using Design Space to Create a Card

 When I saw these drawn 🌺poppies in Cricut Design Space I fell in love.❤️‍🔥 I knew I wanted to make a card using them. I immediately started putting together the card in Cricut Design Space to give me some idea of how I thought I wanted to use them. I will show you the process of how I use Design Space to get the sizing correct. Then how I took those elements to create this classic card. There is a bit of Copic coloring and doodling on this card. I hope you enjoy it. Here is a link to my Cricut Mat in Design Space in case you want to use these Poppies on a card of your own. If you want to see this classic card come together head here to see the video.

Hello Friend: A White Gel Pen is a Powerful Tool

 Here's the card I shared over on TikTok. You can find that video here. 📜 I used a few die cuts I did on my Cricut using Cricut Design Space images and of course, a Spellbinder's die. With the leaves and flower I added a bit of dimension with foam tape. The Hello I cut out of Recollections Rose Gold cardstock and used the same as a frame around the green. The friend under Hello Friend is a sticker I made on my computer. It was looking a bit plain until...I broke out the white gel pen. This card has led to a lot more doodling on cards lately. You'll start to notice that in some upcoming cards I am sure.

Using Offset in Cricut Design Space

 

Today I want to share with you my new favorite part of🦗 Cricut Design Space....Offset!!! This is a game-changer. 🤩 With my new Spellbinders Monthly Card Kit, not all the images come with coordinating dies. But that is no longer an issue! With the offset feature in DS I can now create an outline for each of my stamps. I can then stamp them on these outlines later when I want to use one of them for a card. I am sooo happy this feature has been added. Check out my YouTube Video to see how I did this. You can find it here.

Split Card Design

 I wanted to give a Split Card🪓 Design a try. I have seen this done on the lovely @jennifermcguireink

YouTube channel. I love how you can get two cards from one doing this. If you want to see the two designs I made you can head on over to my Youtube Channel. The link is in the bio. I did not do a great job editing it so please accept my apology for that. Please stick with me...I will eventually find my editing groove. It's a learning process. I also realize at the end I forgot to put an ending...🤦. How everyone does this on a regular basis..I don't know, but I know I have a lot of respect for content creators. It isn't easy. Hope you like all the cards I put together with this technique!

Head on over to see the video HERE!