Miss Kate Cuttables: Miss Kate Cuttables

Showing posts with label Miss Kate Cuttables. Show all posts

Sunday, March 31, 2019

March Fan Projects

Hello Everyone! It's Amy and I'm sharing the March Fan Projects today!

We had several St Patrick's Day Projects.

Here's Joanne Crevits wreath:

Card by Beckie Williams:

Card by Donna Miller:

Card by Wendy Sanchez:

Door Decoration by Diane Paulina:

Card by Wendy Sanchez:

Shaker Card by Donna Miller:

Layout by Michele Roberts:

Thanks to everyone who shared their creations on the Miss Kate Cuttables Galleria Facebook Page!

I'll be back at the end of April to share more fan projects.

Monday, March 25, 2019

Good Luck

Hello Everyone!

Today is my day to show off on the
Miss Kate Cuttables Blog :)

First off...

As you know, Miss Kate Cuttables has the
best darn SVG files and you can
get one for FREE every week!
YES...FREE!!!

Go HERE for this weeks FREEBIE.

Ok...so, I know it's past St. Patty's day but it's still
March so I'm going to finish out the month with
one more card I made using
the "Irish Owl" file

I just LOVE this Owl and his balloon!

If you're curious, all of the details on this
are over on my blog HERE

I hope you enjoyed my card today...I would
love it if you would leave me a comment and tell me what you think!

Please go visit me at
Simply Silhouette and follow my blog :)

Thursday, March 21, 2019

Jen's Crafty Place with a Pop Up Birthday Card

Jenny from Jen's Crafty Place here to make a quick pop up card with Miss Kate Cuttables. I decided on making a mouse card for someone who loves going to Disney. I love the simple pop up element I used in this card.

Before we get into the instructions on making this card, click HERE to get your daily freebie at Miss Kate Cuttables!!

I used a couple of Miss Kate files: Mouse Uppercase Alphabet and Mouse Balloons. I did a print and cut with the Mouse Balloons and cut out several balloons. I then went to THIS website to make my pop up element. I used a normal A2card base and inserted the pop up element in the center. I then covered the panels of the inside of the card with some yellow mouse paper I took out of a Disney scrapbooking pack.

I added the balloons I cut out to the pop up element and then went back to my Cameo 3 to cut some letters. I used the Mouse Uppercase Alphabet to type out "Happy Birthday". I then added the sentiment to the inside of my card.

I then use some more goodies from my Disney scrapbooking pack and decorated the front of my card and I was done!! Thanks for stopping by!!

Don't forget to drop by my blog for more ideas and sign up for my newsletter to get the latest posts as they are posted!

Jen's Crafty Place

Twitter

Instagram

Thursday, February 21, 2019

Jen's Crafty Place with a Vinyl Wine Glass Project

Happy New Year!! This is Jenny from Jen's Crafty Place with my first post of the year for Miss Kate Cuttables.

Today I am doing a vinyl project for Miss Kate Cuttables. I want to remind you to head over to Miss Kate Cuttables for a daily FREEBIE!!

I did a adorable "love" saying with vinyl. It is layered but EASY to do. I had 2 shades of blue so I did the heart in blue. You can choose any colors or just do it with one layer of red. I purchased the file called "Word Love Set" from Miss Kate Cuttables. This idea can be done with just about any word set so look around and find one you like. (My directions will be for the love file but the idea is the same for all.) Open up your favorite cutting program. I used the Silhouette program to cut it with my Cameo 3.

As you can see above I took the layers apart and placed them on my mat in three places. Each item is a different color. This way I can cut them all with one pass through the cutter. I placed a piece of black vinyl at the top left large enough to fit the image "love". I then placed the two layers of the heart in the top right and bottom right of my mat, just like in the image above. I set my cutting tool to "vinyl glossy" since my vinyl is glossy and then hit "send". The machine cut them out beautifully. (I also want to mention I placed squares around each of my images for easier weeding.)

After I cut the items out I weeded them (weeding means to remove all the extra vinyl you aren't going to use for the project.) Then take some transfer tape and lift off the darker heart. Place it over the black heart space on the word "love" and adhere. Next, lift off the lighter heart and place it over the darker heart. This makes it easier to place it on the curved surface if all your layers are already on the project.

Lastly, make sure your item is clean (if using glass, use some alcohol to wipe the area down to remove any finger prints, oil from your hands or any dust) and lift the whole design with your transfer tape and adhere to your final project. Make sure you rub the vinyl down to get good adhesion. For a bonus, the tiny heart that was cut out of the larger heart, I place it at the end of my "e" for a little pop of color at the end. That's it! Project done and ready to use!!

I hope you enjoyed today's project! Make sure you stop by my blog and up for my newsletter so you don't miss any upcoming projects!

Jen's Crafty Place

Twitter

Instagram

Thursday, January 17, 2019

Print and Cut series with Jen's Crafty Place

Jenny from Jen's Crafty Place with today's part 2 of the "Print and Cut" series with Miss Kate Cuttables. Check out part one HERE.

Before we get into the project, don't forget to go HERE to get your daily freebie from Miss Kate Cuttables.

This card is using the items we printed out in part 1.

I simply added my pieces to a simple base card and added some decorative paper to complete my Valentine's day card for my husband!!

I chose to add pop dots to my elements instead of cutting the elements out of the card base.

It is just as dramatic as the other card in part 1 but easier to assemble.

I added some glitter pen to all the hearts and the sprinkles to give it some glitz! That's it!! Thanks for stopping by!! Be sure to sign up for my newsletter to get all the latest posts sent directly to your inbox!!

Jen's Crafty Place

Twitter

Instagram

Saturday, December 22, 2018

Waiting for Santa

Hi there! It's Kim from Katydid Cards. This is my last post for Miss Kate Cuttables. After two and a half years of enjoying being a design team member for Miss Kate, I have decided to step down. But I will still be sure to continue to get my Freebie of the Day and I encourage you to do the same.
And I'll see you on the Galleria as I will definitely be following to see what the design team and you fans create each month.

For my card today, I used several Miss Kate SVG files; Waiting for Santa and Dog as well as various patterned papers from the Winter Woodland Digital Collection. As you can see, this cute little pup is waiting for Santa to come to fill his stocking with lots of goodies.

I wanted to turn this into an easel card, so I cut the base to accommodate I thought it would be fun to put a battery operated tealight candle behind the fire, so I cut a piece of vellum to fit. As the area above the mantle looked a bit sparse, I filled a gold bowl with Poinsettia brads from Eyelet Outlet and added a candle embellishment on the right accented with another EO brad, Holly.

Here's another look from the side. I didn't take a picture of it, but if you know about easel cards, you know this lies flat for mailing...such a cool idea!

I couldn't get the best picture of it, though I took dozens, here's the card with the tealight behind it.

As this is the end of an era, so to speak. I took a trip down memory lane, looking at all the cards I've made using Miss Kate's files. Some are among my favorites. Here's a link if you want to look, too.

Thursday, December 20, 2018

Jen's Crafty Place with a Winter Spinner Card

HI!! Jenny from Jen's Crafty Place! I have a great interactive card today. It is a spinner card! I used some great files from Miss Kate Cuttables. Before we get into the project, don't forget to get the FREEBIE of the day!! Now on to the project!!

I used the "Christmas Penguin" file to cut the penguin two times. I flipped the one penguin horizontal. Then I used the Swirl Snowflakes Digi Paper to make a piece of paper to fit the front of my card. I sized it 1/4 inch smaller then my A2 card. My digi paper finished size is 4 x 5.25 inch.

I designed my card all on my Cameo 3 by Silhouette. I made my penguins about 2.5 inches tall and made my hole circle larger, about 3 inches in diameter so the penguin can spin freely. I placed them all on my digital mat and cut all the images at once.

I laid a piece of clear thread across the hole and taped it very securely with scotch tape. Then I placed the thread between the two penguins and glued them to each other. Lastly, I added the digital paper on top and my card was finished. For the sentiment I used, " Winter Word Titles".

I didn't like the cut I got with the snowflakes on the sentiment so I had to hand trim them off. I also hand trimmed the white border. I cut the words at a length of 4 inches so the snowflakes were too tiny to have all the details in the snowflakes cut properly. If your cutter is up for the challenge, then leave them on. It is your choice!! I also added some Wink of Stella to the letters for a glistening effect. I used foam adhesive to pop up the sentiment when I was finished.