Spread your Wings and Fly

I've made another butterfly card.  This one is made with a large Uniko stamp that was part of an old Papercraft Society box and I've used the colours from the current AAA Cards colour challenge.

To make this card I used:
     6" x 6" white linen card blank
     Papercraft Society 'Box 51 Uniko' stamps and coordinating die
     Versafine Smoky Grey ink
     Cosmic Shimmer Clear Detail embossing powder
     Copics - BV02, RV02, V 12 & YR00
     Snippet of white matt card

I used grey ink to stamp the large butterfly onto a snippet of white matt card before embossing it with clear embossing powder.  The butterfly was then cut with the coordinating die before being coloured with four Copics to match the challenge colours.  I placed the card blank into my MISTI and put the butterfly onto it so I could see where to stamp the sentiment.  I removed the butterfly and stamped the sentiment with grey ink before embossing it with clear embossing powder.  To finish I attached the butterfly along its body and shaped the wings.

I am entering the following challenges:
     AAA Cards - Colour Challenge
     Addicted to Stamps & More - Make Your Mark (I've used ink and Copics)
     Allsorts - Anything Goes
     Cut It Up Challenge - Something with Wings
     Krafty Chicks Challenge - Anything Goes + Twist of Colour an Image
     Love to Craft - Anything Goes
     Moving Along With The Times - One or More Butterflies
     Simply Clean & Simple - Things That Fly

Kath x

Floral Tag

I made this tag for the Tag-along (and ATC's) 'Love and Romance' challenge using lots of snippets of card and ribbon.

To make this tag I used:
     Creative Expressions ''Pierced Tags', Creative Expressions 'Finishing Touches - French Marigold' and Sizzix 'Floral Hello' dies
     Snippets of white hammer card, white matt card, red glitter card and red ribbon

I die cut the largest tag from a snippet of white hammer card and used my embossing mat to emboss around the edge of the tag.  I die cut three different size flowers and two large leaves from white matt card.  The flowers were layered and attached to the lower edge of the tag with the leaves tucked underneath the flower.  I die cut a small heart from red glitter card and attached it to the centre of the flower.  To finish I attached a red ribbon bow to the top of the tag.

I am entering the following challenges:
     Beautiful Blossoms - Anything Floral Goes
     Cut It Up Challenge - Anything Goes
     Little Red Wagon - Use the Force (I've used die cutting and embossing)
     Love to Craft - Anything Goes
     Love to Scrap - Anything Goes
     Moving Along with the Times - Use Stencils and/or Dies (I have chosen dies)
     Snippets Playground - Challenge 552
     Tag-along (and ATCs) - Love and Romance

Kath x

Oldie But Goodie

This is another quick card that I've made for the Cut It Up 'Oldie but Goodie' challenge, using a Memory Box die that I bought back in 2015 and is still one of my favourites.

 To make this card I used:
     C6 white matt card blank
     Memory Box 'Sparkling Tree Tile' and My Favorite Things 'Inside & Our Stitched Rectangle STAX Die-namics' dies
     Snippets of white matt card, dark patterned paper and gold glitter card

I die cut the snippet of white matt card using the largest rectangle die - as the die wasn't long enough I cut the first half of the die before moving it down the card to cut the second half.  I then die cut the tree from the centre.  I used Artist Tac to attach a snippet of green paper behind the aperture before attaching the panel to the card blank.  I die cut the small tree baubles from snippets gold glittter card and inlaid them into the card.

I am entering the following challenges:
     Addicted to CAS - Christmas
     Allsorts - Anything Goes
     As You Like it Challenge - Festive Creations 
     Cardz 4 Galz - Christmas Sparkle
     Christmas Kickstart Challenge - If it's Christmassy, Link It Up
     Cut It Up - Oldie but Goodie
     Snippets Playground - Challenge 521

Kath x

Whimsical Flower Arrangement

I made this card with a 'new to me' Altenew stamp and coordinating die set.

To make this card I used:
     4" x 4" white matt card blank
     Altenew 'Whimsical Flower Arrangement' stamps and coordinating die
     My Favorite Things 'Inside & Out Stitched Circle STAX Die-namics' die
     Versafine Vintage Sepia ink
     Cosmic Shimmer Clear Details embossing powder
     Promarkers
     Snippet of white matt card

I used brown ink to stamp the flowers onto a snippet of white matt card before embossing them with clear embossing powder.  The flowers were then cut with the coordinating die before being coloured with Promarkers.  I used a stitched circle die to cut another snippet of white card and put it into my MISTI.  I laid the flowers onto the circle so I could see where to place the sentiment.  I removed the flowers and stamped the sentiment with brown ink before embossing it with clear embossing powder.  The circle was attached to the centre of the card blank before the flowers were added using foam pads.

I am entering the following challenges:
     Addicted to Stamps & More - Due Cuts and/or Stencils (I have chosen die cuts)
     Beautiful Blossoms - Anything Floral Goes
     Cardz 4 Galz - Colouring (I have used Promarkers)
     Cut It Up - Thankful, Grateful, Blessed
     Simply Clean & Simple - Clean and Simple
     The Flower Challenge - Thanks

Kath x   

Another Butterfly Birthday Card

When I stamp and/or emboss card fronts, I usually make an extra one in case I mess up the one I'm working on.  This card uses the second card from when I made my World Cardmaking Day card, although I changed the butterfly to one of my 'old favourites' and added some enamel dots.

To make this card I used:
     6" x 6" white matt card blank
     Cardmaking Magic 'The Best of Cardmaking Magic' butterfly stamp & coordinating die   
     Uniko 'Birthday Wishes' sentiment stamp
     Creative Expressions 'Clean and Simple - Zig Zag Border' die
     Versafine Imperial Purple ink
     Yellow and green Promarkers
     Cosmic Shimmer Clear Detail embossing powder
     Altenew Crystal Clear enamel dots
     Snippet of white matt card and white paper

I used the Zig Zag border die to emboss a strip across the top of the card.  I stamped the butterfly onto a snippet of white card using purple ink and embossed it with clear embossing powder before cutting it with the coordinating die.  I then coloured the butterfly with yellow and green Promarkers.  As the colour had leached to the back of the butterfly, I die cut another butterfly from white paper and glued it to the back.  I placed the card into my MISTI and stamped the sentiment with purple ink before embossing it with clear embossing powder.  I shaped the butterfly's wings and attached it to the embossed strip along its body.  To finish I added four clear enamel dots.

I am entering the following challenges:
     A Cut Above - Anything Goes with a Die Cut
     Addicted to Stamps & More - Any Occasion
     Allsorts - Anything Goes
     Cut It Up - Add Embellishments (I have added enamel dots)
     Seize the Birthday - Anything Goes

Kath x

August Rudolph Day

For one reason and another I've not done much crafting over the last couple of weeks, although I have been tidying my craft drawers to make room for a lot of cross stitch items I've been gifted.  During my 'sort out' I came across several embossed panels and some die cuts which I had made for cards and not used.  One of the panels and some letters were perfect for making this quick die cut card for Rudolph Day (die cutting is my RD theme this year)

To make this card I used:
     7" x 5" white matt card blank
     Creative Expressions 'Festive Collection - Joy', All Occasion Dies 'Small Poinsettia' and Memory Box 'Mini Holly Leaves' dies
     Xcut 'Swirls' embossing folder
     Snippets of white matt card

The panel had been embossed and I trimmed it around the edges before attaching it to the front of the card.  The letters had been die cut from white card and I then die cut the poinsettia and holly berries from another snippet of white card.  The poinsettias were layered with the holly berries attached to the centre.  I layered two 'J' and two 'Y' letters so they would be more prominent in the centre of the embossed panel.  I placed the letters and poinsettia onto the card to ensure they were evenly spaced before gluing them into place.

I am entering the following challenges:
     A Cut Above - Anything Goes with a Die Cut
     ABC Christmas Challenge - Q for Quick
     Ally's Angels - Anything Goes
     Cut It Up - Anything Goes
     Rudolph Day - August Challenge
     Tic Tac Toe - Challenge 277 (I have chosen Letters, Free & Rectangle Shape)

Kath x

Let Your Dreams Take Flight

I wanted to make a tag to follow the theme for this month's Tag along & ATCs 'Travel' challenge but was struggling to find anything travel related then remembered that dreams can take flight!

To make this tag I used:
     Creative Expressions 'Pierced Tags' die
     Hot off the Press 'Feathers' stamps and coordinating die
     Versafine Imperial Purple ink
     Dark brown Promarker
     Snippets of white and dark purple card, Lili of the Valley 'Antebellum' paper and purple ribbon

I attached the snippet of Antebellum paper to white card and used the largest die to cut the tag.  I placed the tag into my MISTI and used purple ink to stamp the sentiment in the lower corner - stamping a couple of times to get a good depth of colour.  I used purple ink to stamp the feather onto purple card and cut it with the coordinating die.  The feather was then attached above the sentiment.  The purple ribbon was a bit too bright so I coloured it with a dark brown Promarker so it matched the colour of the feather before attaching it to the top of the tag.

I am entering the following challenges:
     A Cut Above - Anything Goes with a Die Cut
     Addicted to Stamps & More - Any Occasion
     Cut It Up - Add a Sentiment
     Tag-along & ATCs Challenge - Travel

Kath x

Happy Birthday

I made this card with a lovely Sizzix flower stamp and die - I do love coordinating stamps and dies as I don't have much patience for fussy cutting!

To make this card I used:
     C6 white hammer card blank
     My Favorite Things 'Inside & Out Stitched Oval STAX Die-namics' die
     Sizzix 'Floral Hello' stamps and coordinating die
     Clearly Besotted 'Fancy Sayings' sentiment stamp
     Versafine Vintage Sepia ink
     Cosmic Shimmer Clear Detail embossing powder
     Promarkers
     Snippets of white hammer card and white matt card
     Altenew Crysstal Clear enamel dots
     Wink of Stells

I used brown ink to stamp the flowers onto a snippet of white matt card.  I embossed them with clear embossing powder before cutting them with the coordinating die.  I used a pink Promarker for the flowers, bright green for the flower centres and a darker green for the leaves.  I die cut a stitched oval from a snippet of white hammer card and put it into my MISTI before placing the flowers onto the circle so I could see where to position the sentiment.  I removed the flowers and stamped the sentiment with brown ink before embossing it with clear embossing powder.  The oval was attached to the centre of the card blank with foam pads and the flowers attached above and below the sentiment.  I added a Wink of Stella to the flower petals and three small clear enamel dots around the sentiment.

I am entering the following challenges:
     Addicted to Stamps & More - Birthdays
     Allsorts - Anything Goes
     Cut It Up - Add a Sentiment
     Stamping Sensations - Anything Goes
     Tic Tac Toe Challenge - Challenge 276 (I chose CAS, Free & Any Shape Die - although it could also be CAS, Sentiment & Embossing)
     The Flower Challenge - Add Embellishments (I have used enamel dots)
     We Love Stamping - Flowers

Kath x

Merry Christmas Tree

I've had this Christmas tree die for a while, but this is the first time I've used it.  I thought it would be perfect for a quick CAS Christmas card.

To make this card I used:
     6" x 6" kraft card blank
     Impression Obsession 'Merry Tree' die
     Snippets of kraft card and white matt card

I trimmed a snippet of white matt card to 5" x 5" and then a snippet of kraft card to 4.75" x 4.75".  I die cut the Christmas tree from the kraft card before layering it onto the white card and then attaching it to the card blank.  I die cut the tree again from a snippet of white card before inlaying the white tree and the small infill snippets of kraft card.

I am entering the following challenges:
     52 Christmas Card Throwdown - Kraft and White
     Addicted to Stamps & More - Die Cuts and/or Stencils (I've used die cuts)
     Alphabet Challenge - C for Christmas Tree
     As You Like It Challenge - Clean & Simple or Fussy & Fancy (my favourite is always CAS - if I do make a fussy card I'm never happy with it as they tend to look messy!)
     Christmas Crafts All Year Round - Rockin' around the Christmas tree
     Cut It Up Challenge - Starts with a 'C' (I've chosen Christmas)
     Krafty Chicks Challenge - CAS
     NBUS - Challenge 73 (my new, to me, Christmas tree die)

Kath x   

Happy Birthday to You

I needed a  card for a forthcoming male birthday, so have used some snippets and one of my favourite Lawn Fawn dies.

To make this card I used:
     6" x 6" white matt card blank
     Lawn Fawn 'Giant Happy Birthday to You' die
     Snippets of silver mirri card and turquoise card

I trimmed the snippet of turquoise card to a square and die cut the sentiment from the centre.  The panel was then attached to a slightly larger square of silver mirri card and attached to the front of the card blank.  I die cut the sentiment twice from more snippets of silver mirri and inlaid them to the front of the card blank, together with the small pieces of the turquoise die cut.  To finish I attached the turquoise sentiment, offsetting it slightly to create a silver shadow.

I am entering the following challenges:
     AAA Birthday Card Challenge - Masculine
     A Cut Above - Anything Goes with a Die Cut
     Cut It Up - Happy Birthday
     Seize the Birthday - Anything Goes

Kath x

Love

I've made another anniversary card for the AAA Cards 'Follow the Leader' challenge using some more white snippets.

To make this card I used:
     C6 white matt card blank
     Impression Obsession 'Love' die
     Snippets of white matt card and red glitter card

I die cut 'Love' three times from white matt card.  I layered the die cuts before attaching them to the bottom corner of the card.  The three small hearts that had been cut from the heart on the sentiment were attached to the card.  To finish I die cut another small heart from the red glitter card and inlaid it into the 'Love'.

I am entering the following challenges
     AAA Cards - Follow the Leader
     Crafty Calendar Challenge - Add a Die Cut
     Cut It Up - Have a Heart
     Litlle Red Wagon - Can You Feel the Love Tonight
     Love to Craft - Anything Goes
     Love to Scrap - Anything Goes
     Simply Clean and Simple - Anything Goes

Kath x

Floral Anniversary

I made this anniversary card for the AAA Cards 'Follow the Leader' challenge and used a few more of my white snippets.

To make this card I used:
     C6 white matt card blank
     Creative Expressions 'Finishing Touches - French Marigold', Tattered Lace 'Mini Butterfly' and Sizzix 'Floral Hello' dies
     Snippets of white matt card and red glitter card

I die cut the three different size flowers, two large leaves and a small butterfly from white matt card.  The flowers were layered and attached to the corner of the card.  The leaves were tucked underneath the flower and the butterfly attached above the image.  To finish I die cut a small heart from red glitter card and attached it to the centre of the flower.

I am entering the following challenges:
     Addicted to Stamps & More - Any Occasion
     AAA Cards - Follow the Leader
     Allsorts - Close to Nature
     Beautiful Blossoms - Anything Floral Goes
     Cut It Up - Something New (('ve used a new 'to me' idea of following the leader and taking inspiration from their design)
     Daisy Chain Challenge - No Designer Paper
     Love to Craft - Anything Goes
     Love to Scrap - Anything Goes
     Snippets Playground - Challenge 498 (Love is in the Air)
     Triple B Challenge - Birds, Blooms & Butterflies (I have used Blooms and Butterflies)     

Kath x

Rudolph and Friends

When I made my Rudolph Says Hello card last year, I stamped and die cut several more Rudolphs and then never used them.  I came across them in my oddments box and thought they would be perfect for the 52 Christmas Card Throwdown 'Sketch challenge'.  As I had several Rudolphs in the oddments box I made a matching tag for the the Allsorts 'Matching Pairs' challenge.

To make this card and tag I used:

     C6 white matt card blank
     Clearly Besotted 'Let's Prance' stamps and coordinating dies
     Clearly Besotted 'Cheerful Christmas' stamps

     Creative Expressions 'Pierced Tags' die
     Versafine Onyx Black ink

     Promarkers
     Snippets of white matt card, red textured card and red twine

I put white card into my MISTI and stamped the sentiment across the top.  The panel was trimmed, layered onto red textured card and attached to the card blank.  The reindeer had been stamped in black ink and cut with the coordinating dies before being popped into my oddments box.  I chose three different reindeer and coloured them with Promarkers.  To make them stand out on the card I layered the coloured reindeer onto a plain die cut and then attached them across the card under the sentiment.  I used a snippet of white card to cut the pierced tag and attached another Rudolph to the tag and some red twine.

I am entering the following challenges:
     52 Christmas Card Throwdown - Sketch
     AAA Cards - Flies in the Air (Rudolph flies with Santa!)
     Allsorts - Matching Pairs
     Christmas Crafts All Year Round - The Christmas Song (I have used 'To see if a reindeer really knows how to fly)
     Crafty Calendar Challenge - Add a Die Cut
     Cut It Up - Anything Goes
     Stamping Sensations - Hand Coloured Image
     We Love Stamping - Anything But Square

Kath x

Hello

I've made another note card for my card box - this one uses lots of snippets of textured card.  Steve bought me the Papermania card pack several years ago and I'm now reduced to a box of snippets which I'm trying to reduce - without much success!

To make this card I used:
     C6 white matt card blank
     My Favorite Things 'Fishtail Flags' and Altenew 'Simply Hello' dies
     Snippets of white matt card. Papermania textured card and white printer paper

I die cut lots of fishtail flags from different colour textured card using the smallest die.  I attached these to a piece of paper using glue so I had a little 'wriggle room' to line up the strips.  When they had dried I used the largest fishtail flag to cut the top and bottom of the strip.  The die wasn't quite the right size to fit across the card so I cut one side of the strip, removed the die and lined it up on the other side before die cutting the rest of the strip.  This panel was then attached to the front of the card blank.  I die cut 'hello' twice from a snippet of white matt card, layered the two sentiments and attached them to the card.

I am entering the following challenges:
     Allsorts - Use Your Dies
     Cut It Up - Use More Than One Die Cut
     Krafty Chicks Challenge - CAS
     Snippets Playground - Challenge 496

Kath x

Just Wanted to Say ...

When I made my Hello card I had stamped and die cut a few spare flowers which I've used on this note card following the sketch at the AAA Cards Challenge.

To make this card I used:
     C6 white matt card blank
     Sizzix Framelits 'Floral Hello' stamp and die set
     My Favorite Things 'Fishtail Flags' die
     Hobby Art 'General Greetings' stamp
     Funky Fossil 'Stacked Lines' stencil
     Versafine Vintage Sepia ink
     Distress Ink - Old Paper
     Promarkers - Orange & Gold
     Cosmic Shimmer Clear Detail embossing powder
     Wink of Stella
     Snippets of white matt card

I placed the stencil on the left side of the card and masked around the edge before using the Old Paper Distress Ink to colour the lines.  I stamped the sentiment onto a snippet of white card and cut it with the fishtail flag die before snipping the end from the die cut and attaching it to the lower edge of the card. The flowers had previously been stamped with brown ink and embossed with clear embossing powder before being cut with the coordinating die.  I used Promarkers to colour the flowers - orange for the petals and gold for the centre.  The flowers were attached to the card with foam pads and a Wink of Stella added to the petals to make them sparkle.

I am entering the following challenges:
     AAA Cards Challenge - Sketch
     Allsorts - Lots of White
     Cut It Up - Use More Than One Die Cut
     Simply Clean & Simple - Anything Goes
     The Flower Challenge - Add Sparkle     

Kath x

Sweet Nature Note Card

I still have a few oddments of Lili of the Valley Art Sheets (I wish they still sold these as the quality is so good and they're also precoloured) and have used one of the Spring images to make this note card.

To make this card I used:
     5" x 5" white matt card blank
     Lili of the Valley 'Sweet Nature' Art Sheet
     My Favorite Things 'Inside & Out Stitched Circle STAX Die-namics' and Memory Box 'Wicker Panel'  dies
     Snippets of white matt card, lilac textured card and green textured card

I trimmed a snippet of green card and attached it to the lower part of the card blank.  I die cut the Wicker Panel from a snippet of white matt card, layered it onto a snippet of lilac textured card and trimmed the ends so it was slightly smaller than the card blank.  This strip was attached to the top of the green panel.  I die cut the precoloured LOTV image and attached it with foam pads.

I am entering the following challenges:
     Allsorts - Anything Goes
     Ally's Angels - Anything Goes
     CAS on Friday - Sketch
     Cut It Up Challenge - Use More Than One Die Cut
     Love to Scrap - Anything Goes

Kath x