Stampotique Guest Designer March, The Chicks Round House Home

This is my second project as Guest Designer in March for Stampotique.
In The Land of Shiny live the circus performing Chicks, and they have built for themselves a cheerful, shiny Round House.
They roost by perching on a chair at night.
Triangular chick doesn't like to sleep on her own so she doubles up with either of the round chicks. Unfortunately square chick makes for an angular and therefore uncomfortable bedfellow.
This started out life as a Pringles tube container.
Click on any picture to make it bigger.

The chicks are  Chick shapes (4 sided cube) 9111 and I have paper pieced their bodies.

The bling on the roof is glued on with Golden Gel Medium in the Heavy gel (matte). 

The flowers are Heart Flowers 9107.
I used versafine black ink heat embossed with clear powder. Coloured the flowers with Cosmic Shimmer watercolour paint and used foam pads as the adhesive.
The stems are bugle beads glued onto the house with Anita's 3D clear gloss finish (substitute with Glossy Accents if you don't have this.) Anita's is thinner and therefore easier to use as this kind of glue. It also gives a stronger bond than Glossy Accents.

 

The chairs are 3 chairs 9179

The walls and roof of the house are watercolours on very thick finest quality white card. Whether you use card or thick watercolour paper it mustn't stretch and buckle (go wavy and unflat) because you can't wallpaper with buckled card as it looks dreadful.
Or you could stamp onto designer paper like Basic Grey plain coloured 12" card if you can't get an unbuckled finish. Alternatively you could try brayering using ink which isn't so wet.
All wallpaper glued on with extra strong doubled sided tape (red backed).
The background stamp is the brilliant Large Lace Background 5177 and I used worn lipstick distress ink. Loads of things you can do with this versatile stamp.

If you would like to have a go at a round house I give more instructions here.
Be warned though, in case you don't like fiddly things, as they are fiddly to do especially if you wallpaper them.
It is easier to do if you cover the round container with lots of tissue paper (glue with gel medium or mod podge or my least favourite for this job - white PVA) and then paint it.

Happy creating!
Gini
xx

Alter It Monthly Challenge. July 2010, Home Sweet Home - Flora's Round House

I recently found a new altered art challenge site that is monthly - whoohoo!
You can find it here. They also have a prize up for grabs, which always helps as an incentive.

I made another round house for a very special friend's birthday, the fantabulous card making Sylvia.
Happy birthday to you!

This is Flora by Evelyn De Morgan which is Sylvia's favourite Pre Raphaelite painting.

Now by my reckoning Flora has been standing barefoot in the garden for 116 years so I thought it was about time someone let her in a house to warm up her toes and maybe take a bath.

Click on the picture to make it bigger so you can see some of the glamour dust sparkle.

The interior and shutters are a gentle antique red not the raging RED that appears in the above photo.
I have got the colour better in this next photo. (I couldn't improve it in photo shop any further not with my limited skills anyway, oh dear.)

The house started out life as a 500 gram container of coffeemate.
Dimensions are:
Diameter 4".
Height of container 5.5", roof is extra on top.

I got the idea for the shutters from an article by Gail Milburn on page 72 of February 2009 Edition of Craft Stamper.


How to make it.

The first thing to consider is that it is much easier to gesso and then decorate by painting one of these.
If you want to wallpaper one, then you must be prepared to measure accurately in order to get a nice finish and expect a fair amount of cursing whilst you're doing it.
Once you've made your first one and made all your mistakes with that one it'll be plain sailing on all future ones! I'll show you my first one in a minute so you can laugh at it.

First of all decide what image (if any) is going to lean out of your window.
Size the image by measuring the height of your tin and allow for an inch or so of headroom in the container otherwise your head will get partially hidden under the overhang of the roof.
Once you have printed out your image, then you can decide on the width and the height of the window and how far up the tin the windowsill needs to start to suit your image.
(Next time I make one I'll take photos as I go along, because it is much easier to see how this goes together that way.)
Cut out your window and divided it into two shutters.
Decide whether you want the shutters to sit concave or convex against the sides of the house.
Mine sit concave because it is easier to glue the shutters open that way .
There is another way to do this that I use and I'll explain later.
Then label each shutter Left and Right so you don't get in a muddle with them.

To attach the shutter to the house cut a rectangular piece of card  that measures the height of the shutters and is about 1.5" wide.
Fold in half lengthways.
Glue one half of the rectangle to the side of the shutter that will sit  flush with the house.
Then wallpaper and decorate the shutter completely before you stick it onto the house.
I used the strong double sided tape (red backed) for all my wallpapering.
Your wallpaper can be designer card or paper, either will work fine.
Alternatively you could use gel medium as a glue.
Or if you want a bit of wiggle room then use white PVA but this would be my last chioce of glues for this project.

Then wallpaper the inside of the house.
When you have a window you don't need to glue the wallpaper down, if you have cut it accurately it will stay in place all on it's own as if by shiny magic.
You then stick the shutters onto the side of the house and then wallpaper the outside of the house.
I glued the shutters back in place with strong white PVA and used pegs to hold the shutters open while the glue dried.
For instructions on how to measure everything and how to glue the beads on and make the roof see this post that gave instructions for making this shell house.

The only difference is that on Flora's roof I glued punched out flowers around the bottom of the roof and if you decide to do this you need to make a circular band of card that will sit on the lip of the tin to raise the roof up enough to allow for the roof decorations to sit correctly.

I also used Tim Holtz grungeboard flourishes that I first painted in a bright green acrylic then I used my finger to apply two different shades of metallic green in a random way. Glued them on with glossy accents.
I also added some pearls and bling, lots and lots of glamour dust to the flowers using a Sakura Quickie glue pen.

The butterflies are Anita's Fairy Wings dimensional butterflies with the awful fugly silver holographic edge cut off.
Now as you know I am partial to a bit of shiny, but these butterflies are delicate woodland shades of brown and the very last thing they need is cheap and ugly silver holographic crap on them. So I used my tiny scissors and cut it all off. Off with the shiny! Never thought I would be saying that. Ever.

So onto my very first piece of 3 dimensional art and my first round house.
I did this one with two windows, one front and one back as it were.
I held the shutters open by tying the two shutters, one from each window, together with fancy yarn.
This is a T Rex shrine that I made for Himself as a Valentines present in 2009.
Okay you can start laughing now,
it's very heartening to me to see how I've improved in just over a year.
The photo's are abysmal quality as well which make matters worse.

Okay stop laughing now or I'll cry.

I am behind on visiting everyone and will try and remedy that shortly.

Happy creating!
Gini
xx

ABAA Shell Challenge June 2009, Ferdinand's Flotsam and Jetsam Emporium

Hooray, all's well that ends well, Ferdinand is safe and well and living in Clacton on Sea!
Evangeline WILL be pleased!!!
His new Emporium and boundless charm are drawing the crowds like a magnet.
I'm sure all the Lady Birds will flock to see Ferdinand's shiny bits.
Click on the pictures to see them bigger.


I was so pleased when this months challenge was Shells, there is just something so elemental about shells and seaside paraphernalia that appeals to, and delights just about everyone isn't there?
I have wanted something like this since I was a girl, I don't live close to the sea any more and I do so miss it.
This started off life as a 1 kg tin of coffeemate.




How I made it.
After I cut out a panel, I wallpapered inside and outside with 12" card stock from DCWV Pocket full of Posies set (I just love this collection of designs and www.artymiss.co.uk have got it for £5 for a 48 sheet stack pack of12" card right now!)

I used Golden Heavy Gel (Matte) medium to glue the outside card on. It dries very fast, so glue and stick in small areas at a time. I used double sided tape to glue the inside card on. Start with a strip of tape down one edge of the card that will sit flush with the vertical opening , press the card on, then add another vertical strip to the card about three inches in and press down again and keep going all the way around. I wouldn't like to try and paper the inside of a round tin without double sided tape.

I wouldn't have attempted to make the shelves without foam board. Foam board is very light and I was able to use a couple of small foam pads to stick each shelf on the inside of the house. I first covered the foam board in another Pocket full of Posies card. I used Anita's tacky PVA glue to stick it on the foam board. To get the shelves to sit flush with the inside wall of the house I used the round floor template I had cut to make the inside floor of the house as a template to draw the curve at the back of the shelf, then cut out the shelf using a craft knife. I used a piece of string to measure the inside diameter of the house to cut the floor circle the right size and I also used string to measure the inside circumference of the house to cut the inside wall paper the right size.

The hardest part was trying to stick the shelves in. Two front facing eyes don't cut the mustard I'm afraid, but how many more eyes and where they would need to be positioned is a feat of engineering way beyond me. The result being slightly wonky shelves, but evolution was working against me.

I used Anita's 3D Clear Gloss finish to glue on all the contents of the shelves, the seed bead edging around the inside and opening of the house and all the beads and bling making the flowers around the outside of the house.

When trying to glue a line of bugle beads, seed beads or any little beads, it is much easier if you string them on some sewing thread first, then run a line of clear gloss along the line you want the beads to sit on. Then lay the string of beads along the line of glue. You can either pull out the thread after a minute or two or just trim the thread at each end of the line of beads.

The roof was made using pot pourri , that was already dyed turquoise and was some sort of seed head that stuck out on three sides to make the seed head shape. It looks like feathers and I'm really pleased with it. I cut a 12" diameter circle of card that was turquoise and cut a large pizza shaped triangle out of the circle and used double sided tape to make the cone shape stick together. Sticking the seed heads on would have been a nightmare of much cussing if I had used a tacky PVA glue mainly because it is messy and dries slowly, however Golden regular gel (Matte) medium was the perfect glue because it dries so quickly and isn't messy.

I haven't glued on the shells around the bottom of the outside of the house because by them being removable it will be easier to dust.
My high tech way of dusting this type of creation is to shut my eyes and blow (don't knock it , it works!).
Many of the shells are beach finds, some are bought ages ago and I used a lot of my old jewellery bits and pieces as well.



Linda (ABAA) inspired me to have a go at a twinchie with her lovely shells ones. So this is my first twinchie. I think it can sit on my computer at work as it is very apt at the moment in view of the current economic climate.





This was a backgound I painted with acrylics and edged with a brown chalk ink and used Anit's 3D clear gloss finish again to stick everything down. I'm always picking up weather worn limpet shells like this off my husband - no sorry- I meant beaches. The little face fell off one of my sons socks in the wash, in fact the whole pack of socks disintegrated in the wash very quickly. (Bad Matalan)


I have had a wonderful time visiting everyones blogs who have entered the challenge this month. So many talented happy crafters it's been great fun, thank you to everyone and especially to Rosie and Linda for running the challenges. :)