2008-02-03 Tim Retout <diocles@gnu.org>
+ Remove automake-generated files.
+
+ * Makefile.in: Remove from repository.
+ * afm/Makefile.in: Likewise.
+ * afmlib/Makefile.in: Likewise.
+ * afmlib/ansi2knr.1: Likewise.
+ * afmlib/ansi2knr.c: Likewise.
+ * compat/Makefile.in: Likewise.
+ * config.guess: Likewise.
+ * config.sub: Likewise.
+ * depcomp: Likewise.
+ * docs/Makefile.in: Likewise.
+ * docs/mdate-sh: Likewise.
+ * docs/texinfo.tex: Likewise.
+ * install-sh: Likewise.
+ * lib/Makefile.in: Likewise.
+ * missing: Likewise.
+ * mkinstalldirs: Likewise.
+ * scripts/Makefile.in: Likewise.
+ * src/Makefile.in: Likewise.
+ * src/ansi2knr.1: Likewise.
+ * src/ansi2knr.c: Likewise.
+ * src/tests/Makefile.in: Likewise.
+ * states/Makefile.in: Likewise.
+ * states/hl/Makefile.in: Likewise.
+ * states/tests/Makefile.in: Likewise.
+ * w32/Makefile.in: Likewise.
+
Remove autopoint-generated files.
* ABOUT-NLS: Remove from repository.
+++ /dev/null
-# Makefile.in generated by automake 1.7 from Makefile.am.
-# @configure_input@
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Top level Makefile for enscript.
-# Copyright (c) 1995-1999 Markku Rossi
-#
-# Author: Markku Rossi <mtr@iki.fi>
-#
-
-#
-# This file is part of GNU enscript.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; see the file COPYING. If not, write to
-# the Free Software Foundation, 51 Franklin Street, Fifth Floor,
-# Boston, MA 02110-1301, USA.
-#
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
-
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_triplet = @host@
-ACLOCAL = @ACLOCAL@
-ALLOCA = @ALLOCA@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
-CATOBJEXT = @CATOBJEXT@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DATADIRNAME = @DATADIRNAME@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GENCAT = @GENCAT@
-GLIBC21 = @GLIBC21@
-GMSGFMT = @GMSGFMT@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTOBJEXT = @INSTOBJEXT@
-INTLBISON = @INTLBISON@
-INTLLIBS = @INTLLIBS@
-INTLOBJS = @INTLOBJS@
-INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
-LDFLAGS = @LDFLAGS@
-LEX = @LEX@
-LEXLIB = @LEXLIB@
-LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MEDIA = @MEDIA@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-MSGFMT = @MSGFMT@
-MSGMERGE = @MSGMERGE@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-POSUB = @POSUB@
-PSLEVEL = @PSLEVEL@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SPOOLER = @SPOOLER@
-STRIP = @STRIP@
-U = @U@
-USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-YACC = @YACC@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__include = @am__include@
-am__quote = @am__quote@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-
-SUBDIRS = intl m4 compat afm afmlib lib scripts intl src po states docs w32
-
-EXTRA_DIST = config.rpath README.ESCAPES README.DOS ABOUT-NLS THANKS ascii.txt \
-asciifise.txt asciidkno.txt 88591.txt 88592.txt 88593.txt 88594.txt \
-88595.txt 88597.txt 88599.txt 885910.txt ibmpc.txt mac.txt vms.txt \
-hp8.txt koi8.txt mtr.eps mtr_small.eps mtr_tiny.eps
-
-
-ACLOCAL_AMFLAGS = -I m4
-subdir = .
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES = intl/Makefile
-DIST_SOURCES =
-
-RECURSIVE_TARGETS = info-recursive dvi-recursive pdf-recursive \
- ps-recursive install-info-recursive uninstall-info-recursive \
- all-recursive install-data-recursive install-exec-recursive \
- installdirs-recursive install-recursive uninstall-recursive \
- check-recursive installcheck-recursive
-DIST_COMMON = README ABOUT-NLS AUTHORS COPYING ChangeLog INSTALL \
- Makefile.am Makefile.in NEWS THANKS TODO acconfig.h aclocal.m4 \
- config.guess config.h.in config.rpath config.sub configure \
- configure.in depcomp install-sh missing mkinstalldirs
-DIST_SUBDIRS = $(SUBDIRS)
-all: config.h
- $(MAKE) $(AM_MAKEFLAGS) all-recursive
-
-.SUFFIXES:
-
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)
-
-$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- $(SHELL) ./config.status --recheck
-$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
- cd $(srcdir) && $(AUTOCONF)
-
-$(ACLOCAL_M4): configure.in m4/codeset.m4 m4/gettext.m4 m4/glibc21.m4 m4/iconv.m4 m4/intdiv0.m4 m4/inttypes-pri.m4 m4/inttypes.m4 m4/inttypes_h.m4 m4/isc-posix.m4 m4/lcmessage.m4 m4/lib-ld.m4 m4/lib-link.m4 m4/lib-prefix.m4 m4/progtest.m4 m4/stdint_h.m4 m4/uintmax_t.m4 m4/ulonglong.m4
- cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.h: stamp-h1
- @if test ! -f $@; then \
- rm -f stamp-h1; \
- $(MAKE) stamp-h1; \
- else :; fi
-
-stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
- @rm -f stamp-h1
- cd $(top_builddir) && $(SHELL) ./config.status config.h
-
-$(srcdir)/config.h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/acconfig.h
- cd $(top_srcdir) && $(AUTOHEADER)
- touch $(srcdir)/config.h.in
-
-distclean-hdr:
- -rm -f config.h stamp-h1
-intl/Makefile: $(top_builddir)/config.status $(top_srcdir)/intl/Makefile.in
- cd $(top_builddir) && $(SHELL) ./config.status $@
-uninstall-info-am:
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
- @set fnord $$MAKEFLAGS; amf=$$2; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
- @set fnord $$MAKEFLAGS; amf=$$2; \
- dot_seen=no; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- rev=''; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
- done; \
- rev="$$rev ."; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
- done && test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
- done
-
-ETAGS = etags
-ETAGSFLAGS =
-
-CTAGS = ctags
-CTAGSFLAGS =
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
- fi; \
- done; \
- list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$tags$$unique" \
- || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique
-
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = .
-distdir = $(PACKAGE)-$(VERSION)
-
-am__remove_distdir = \
- { test ! -d $(distdir) \
- || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
- && rm -fr $(distdir); }; }
-
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
-
-distdir: $(DISTFILES)
- $(am__remove_distdir)
- mkdir $(distdir)
- $(mkinstalldirs) $(distdir)/intl $(distdir)/po
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkinstalldirs) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -d $(distdir)/$$subdir \
- || mkdir $(distdir)/$$subdir \
- || exit 1; \
- (cd $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$(top_distdir)" \
- distdir=../$(distdir)/$$subdir \
- distdir) \
- || exit 1; \
- fi; \
- done
- -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
- ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
- || chmod -R a+r $(distdir)
-dist-gzip: distdir
- $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
-
-dist dist-all: distdir
- $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration. Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
- $(am__remove_distdir)
- GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
- chmod -R a-w $(distdir); chmod a+w $(distdir)
- mkdir $(distdir)/=build
- mkdir $(distdir)/=inst
- chmod a-w $(distdir)
- dc_install_base=`$(am__cd) $(distdir)/=inst && pwd` \
- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
- && $(mkinstalldirs) $$dc_destdir \
- && cd $(distdir)/=build \
- && ../configure --srcdir=.. --prefix="$$dc_install_base" \
- --with-included-gettext \
- $(DISTCHECK_CONFIGURE_FLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) dvi \
- && $(MAKE) $(AM_MAKEFLAGS) check \
- && $(MAKE) $(AM_MAKEFLAGS) install \
- && $(MAKE) $(AM_MAKEFLAGS) installcheck \
- && $(MAKE) $(AM_MAKEFLAGS) uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
- distuninstallcheck \
- && chmod -R a-w "$$dc_install_base" \
- && ({ $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
- distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
- } || { rm -rf "$$dc_destdir"; exit 1; }) \
- && rm -rf "$$dc_destdir" \
- && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \
- && rm -f $(distdir).tar.gz \
- && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
- $(am__remove_distdir)
- @echo "$(distdir).tar.gz is ready for distribution" | \
- sed 'h;s/./=/g;p;x;p;x'
-distuninstallcheck:
- cd $(distuninstallcheck_dir) \
- && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
- || { echo "ERROR: files left after uninstall:" ; \
- if test -n "$(DESTDIR)"; then \
- echo " (check DESTDIR support)"; \
- fi ; \
- $(distuninstallcheck_listfiles) ; \
- exit 1; } >&2
-distcleancheck: distclean
- if test '$(srcdir)' = . ; then \
- echo "ERROR: distcleancheck can only run from a VPATH build" ; \
- exit 1 ; \
- fi
- test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
- || { echo "ERROR: files left in build directory after distclean:" ; \
- $(distcleancheck_listfiles) ; \
- exit 1; } >&2
-check-am: all-am
-check: check-recursive
-all-am: Makefile config.h
-installdirs: installdirs-recursive
-installdirs-am:
-
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -rm -f Makefile $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
-distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-exec-am:
-
-install-info: install-info-recursive
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -rf autom4te.cache
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-info-am
-
-uninstall-info: uninstall-info-recursive
-
-.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am clean \
- clean-generic clean-recursive ctags ctags-recursive dist \
- dist-all dist-gzip distcheck distclean distclean-generic \
- distclean-hdr distclean-recursive distclean-tags distcleancheck \
- distdir distuninstallcheck dvi dvi-am dvi-recursive info \
- info-am info-recursive install install-am install-data \
- install-data-am install-data-recursive install-exec \
- install-exec-am install-exec-recursive install-info \
- install-info-am install-info-recursive install-man \
- install-recursive install-strip installcheck installcheck-am \
- installdirs installdirs-am installdirs-recursive \
- maintainer-clean maintainer-clean-generic \
- maintainer-clean-recursive mostlyclean mostlyclean-generic \
- mostlyclean-recursive pdf pdf-am pdf-recursive ps ps-am \
- ps-recursive tags tags-recursive uninstall uninstall-am \
- uninstall-info-am uninstall-info-recursive uninstall-recursive
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-# Makefile.in generated by automake 1.7 from Makefile.am.
-# @configure_input@
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Automakefile for the AFM files.
-# Copyright (c) 1995-1999 Markku Rossi
-#
-# Author: Markku Rossi <mtr@iki.fi>
-#
-
-#
-# This file is part of GNU enscript.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; see the file COPYING. If not, write to
-# the Free Software Foundation, 51 Franklin Street, Fifth Floor,
-# Boston, MA 02110-1301, USA.
-#
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
-
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_triplet = @host@
-ACLOCAL = @ACLOCAL@
-ALLOCA = @ALLOCA@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
-CATOBJEXT = @CATOBJEXT@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DATADIRNAME = @DATADIRNAME@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GENCAT = @GENCAT@
-GLIBC21 = @GLIBC21@
-GMSGFMT = @GMSGFMT@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTOBJEXT = @INSTOBJEXT@
-INTLBISON = @INTLBISON@
-INTLLIBS = @INTLLIBS@
-INTLOBJS = @INTLOBJS@
-INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
-LDFLAGS = @LDFLAGS@
-LEX = @LEX@
-LEXLIB = @LEXLIB@
-LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MEDIA = @MEDIA@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-MSGFMT = @MSGFMT@
-MSGMERGE = @MSGMERGE@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-POSUB = @POSUB@
-PSLEVEL = @PSLEVEL@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SPOOLER = @SPOOLER@
-STRIP = @STRIP@
-U = @U@
-USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-YACC = @YACC@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__include = @am__include@
-am__quote = @am__quote@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-
-default_afm = agd.afm agdo.afm agw.afm agwo.afm bkd.afm bkdi.afm \
-bkl.afm bkli.afm cob.afm cobo.afm com.afm coo.afm hv.afm hvb.afm \
-hvbo.afm hvc.afm hvcb.afm hvcbo.afm hvcdo.afm hvn.afm hvnb.afm \
-hvnbo.afm hvno.afm hvo.afm ncb.afm ncbi.afm nci.afm ncr.afm pob.afm \
-pobi.afm poi.afm por.afm sy.afm tib.afm tibi.afm tii.afm tir.afm \
-zcmi.afm zd.afm
-
-
-public_fonts = matrix.afm matrix.pfa
-
-EXTRA_DIST = font.map $(default_afm) $(public_fonts)
-subdir = afm
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-DIST_SOURCES =
-DIST_COMMON = ChangeLog Makefile.am Makefile.in
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu afm/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
-uninstall-info-am:
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = ..
-distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkinstalldirs) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile
-
-installdirs:
-
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -rm -f Makefile $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
-
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-data-local
-
-install-exec-am:
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-info-am uninstall-local
-
-.PHONY: all all-am check check-am clean clean-generic distclean \
- distclean-generic distdir dvi dvi-am info info-am install \
- install-am install-data install-data-am install-data-local \
- install-exec install-exec-am install-info install-info-am \
- install-man install-strip installcheck installcheck-am \
- installdirs maintainer-clean maintainer-clean-generic \
- mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \
- uninstall-am uninstall-info-am uninstall-local
-
-
-install-data-local:
- $(top_srcdir)/mkinstalldirs $(datadir)/enscript
- $(top_srcdir)/mkinstalldirs $(datadir)/enscript/afm
- for f in $(EXTRA_DIST); do \
- $(INSTALL_DATA) $(srcdir)/$$f $(datadir)/enscript/afm/$$f; \
- done
-
-uninstall-local:
- rm -rf $(datadir)/enscript/afm
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-# Makefile.in generated by automake 1.7 from Makefile.am.
-# @configure_input@
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Automakefile for AFM library.
-# Copyright (c) 1995-1999 Markku Rossi
-#
-# Author: Markku Rossi <mtr@iki.fi>
-#
-
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-#
-# along with this program; see the file COPYING. If not, write to
-# the Free Software Foundation, 51 Franklin Street, Fifth Floor,
-# Boston, MA 02110-1301, USA.
-#
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
-
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_triplet = @host@
-ACLOCAL = @ACLOCAL@
-ALLOCA = @ALLOCA@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
-CATOBJEXT = @CATOBJEXT@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DATADIRNAME = @DATADIRNAME@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GENCAT = @GENCAT@
-GLIBC21 = @GLIBC21@
-GMSGFMT = @GMSGFMT@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTOBJEXT = @INSTOBJEXT@
-INTLBISON = @INTLBISON@
-INTLLIBS = @INTLLIBS@
-INTLOBJS = @INTLOBJS@
-INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
-LDFLAGS = @LDFLAGS@
-LEX = @LEX@
-LEXLIB = @LEXLIB@
-LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MEDIA = @MEDIA@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-MSGFMT = @MSGFMT@
-MSGMERGE = @MSGMERGE@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-POSUB = @POSUB@
-PSLEVEL = @PSLEVEL@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SPOOLER = @SPOOLER@
-STRIP = @STRIP@
-U = @U@
-USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-YACC = @YACC@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__include = @am__include@
-am__quote = @am__quote@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-
-AUTOMAKE_OPTIONS = ansi2knr
-
-noinst_LIBRARIES = libafm.a
-libafm_a_SOURCES = afm.c afmparse.c strhash.c e_88591.c e_88592.c \
-e_88593.c e_88594.c e_88595.c e_88597.c e_88599.c e_885910.c e_pc.c \
-e_mac.c e_vms.c e_hp8.c e_koi8.c deffont.c
-
-
-noinst_HEADERS = afm.h afmint.h strhash.h
-
-INCLUDES_windelta = +-I../w32/
-
-EXTRA_DIST = ansi2knr.c ansi2knr.1 Makefile-encodings make-encoding.pl
-
-noinst_PROGRAMS = afmtest
-
-afmtest_SOURCES = afmtest.c
-afmtest_LDADD = libafm.a
-subdir = afmlib
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-LIBRARIES = $(noinst_LIBRARIES)
-
-libafm_a_AR = $(AR) cru
-libafm_a_LIBADD =
-am_libafm_a_OBJECTS = afm$U.$(OBJEXT) afmparse$U.$(OBJEXT) \
- strhash$U.$(OBJEXT) e_88591$U.$(OBJEXT) e_88592$U.$(OBJEXT) \
- e_88593$U.$(OBJEXT) e_88594$U.$(OBJEXT) e_88595$U.$(OBJEXT) \
- e_88597$U.$(OBJEXT) e_88599$U.$(OBJEXT) e_885910$U.$(OBJEXT) \
- e_pc$U.$(OBJEXT) e_mac$U.$(OBJEXT) e_vms$U.$(OBJEXT) \
- e_hp8$U.$(OBJEXT) e_koi8$U.$(OBJEXT) deffont$U.$(OBJEXT)
-libafm_a_OBJECTS = $(am_libafm_a_OBJECTS)
-noinst_PROGRAMS = afmtest$(EXEEXT)
-PROGRAMS = $(noinst_PROGRAMS)
-
-am_afmtest_OBJECTS = afmtest$U.$(OBJEXT)
-afmtest_OBJECTS = $(am_afmtest_OBJECTS)
-afmtest_DEPENDENCIES = libafm.a
-afmtest_LDFLAGS =
-
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/afm$U.Po ./$(DEPDIR)/afmparse$U.Po \
-@AMDEP_TRUE@ ./$(DEPDIR)/afmtest$U.Po ./$(DEPDIR)/deffont$U.Po \
-@AMDEP_TRUE@ ./$(DEPDIR)/e_88591$U.Po ./$(DEPDIR)/e_885910$U.Po \
-@AMDEP_TRUE@ ./$(DEPDIR)/e_88592$U.Po ./$(DEPDIR)/e_88593$U.Po \
-@AMDEP_TRUE@ ./$(DEPDIR)/e_88594$U.Po ./$(DEPDIR)/e_88595$U.Po \
-@AMDEP_TRUE@ ./$(DEPDIR)/e_88597$U.Po ./$(DEPDIR)/e_88599$U.Po \
-@AMDEP_TRUE@ ./$(DEPDIR)/e_hp8$U.Po ./$(DEPDIR)/e_koi8$U.Po \
-@AMDEP_TRUE@ ./$(DEPDIR)/e_mac$U.Po ./$(DEPDIR)/e_pc$U.Po \
-@AMDEP_TRUE@ ./$(DEPDIR)/e_vms$U.Po ./$(DEPDIR)/strhash$U.Po
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-DIST_SOURCES = $(libafm_a_SOURCES) $(afmtest_SOURCES)
-HEADERS = $(noinst_HEADERS)
-
-DIST_COMMON = $(noinst_HEADERS) ChangeLog Makefile.am Makefile.in TODO \
- ansi2knr.1 ansi2knr.c
-SOURCES = $(libafm_a_SOURCES) $(afmtest_SOURCES)
-
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .o .obj
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu afmlib/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
-
-AR = ar
-
-clean-noinstLIBRARIES:
- -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-libafm.a: $(libafm_a_OBJECTS) $(libafm_a_DEPENDENCIES)
- -rm -f libafm.a
- $(libafm_a_AR) libafm.a $(libafm_a_OBJECTS) $(libafm_a_LIBADD)
- $(RANLIB) libafm.a
-
-clean-noinstPROGRAMS:
- -test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)
-afmtest$(EXEEXT): $(afmtest_OBJECTS) $(afmtest_DEPENDENCIES)
- @rm -f afmtest$(EXEEXT)
- $(LINK) $(afmtest_LDFLAGS) $(afmtest_OBJECTS) $(afmtest_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT) core *.core
-
-distclean-compile:
- -rm -f *.tab.c
-
-ANSI2KNR = @ANSI2KNR@
-ansi2knr: ansi2knr.$(OBJEXT)
- $(LINK) ansi2knr.$(OBJEXT) $(LIBS)
-ansi2knr.$(OBJEXT): $(CONFIG_HEADER)
-
-clean-krextra:
- -rm -f ansi2knr
-
-mostlyclean-kr:
- -test "$U" = "" || rm -f *_.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/afm$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/afmparse$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/afmtest$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/deffont$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/e_88591$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/e_885910$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/e_88592$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/e_88593$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/e_88594$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/e_88595$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/e_88597$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/e_88599$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/e_hp8$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/e_koi8$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/e_mac$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/e_pc$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/e_vms$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/strhash$U.Po@am__quote@
-
-distclean-depend:
- -rm -rf ./$(DEPDIR)
-
-.c.o:
-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
-@am__fastdepCC_TRUE@ -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \
-@am__fastdepCC_TRUE@ then mv "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
-@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
-@am__fastdepCC_TRUE@ fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
-
-.c.obj:
-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
-@am__fastdepCC_TRUE@ -c -o $@ `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'`; \
-@am__fastdepCC_TRUE@ then mv "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
-@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
-@am__fastdepCC_TRUE@ fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'`
-afm_.c: afm.c $(ANSI2KNR)
- $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/afm.c; then echo $(srcdir)/afm.c; else echo afm.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > afm_.c || rm -f afm_.c
-afmparse_.c: afmparse.c $(ANSI2KNR)
- $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/afmparse.c; then echo $(srcdir)/afmparse.c; else echo afmparse.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > afmparse_.c || rm -f afmparse_.c
-afmtest_.c: afmtest.c $(ANSI2KNR)
- $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/afmtest.c; then echo $(srcdir)/afmtest.c; else echo afmtest.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > afmtest_.c || rm -f afmtest_.c
-deffont_.c: deffont.c $(ANSI2KNR)
- $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/deffont.c; then echo $(srcdir)/deffont.c; else echo deffont.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > deffont_.c || rm -f deffont_.c
-e_88591_.c: e_88591.c $(ANSI2KNR)
- $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/e_88591.c; then echo $(srcdir)/e_88591.c; else echo e_88591.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > e_88591_.c || rm -f e_88591_.c
-e_885910_.c: e_885910.c $(ANSI2KNR)
- $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/e_885910.c; then echo $(srcdir)/e_885910.c; else echo e_885910.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > e_885910_.c || rm -f e_885910_.c
-e_88592_.c: e_88592.c $(ANSI2KNR)
- $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/e_88592.c; then echo $(srcdir)/e_88592.c; else echo e_88592.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > e_88592_.c || rm -f e_88592_.c
-e_88593_.c: e_88593.c $(ANSI2KNR)
- $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/e_88593.c; then echo $(srcdir)/e_88593.c; else echo e_88593.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > e_88593_.c || rm -f e_88593_.c
-e_88594_.c: e_88594.c $(ANSI2KNR)
- $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/e_88594.c; then echo $(srcdir)/e_88594.c; else echo e_88594.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > e_88594_.c || rm -f e_88594_.c
-e_88595_.c: e_88595.c $(ANSI2KNR)
- $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/e_88595.c; then echo $(srcdir)/e_88595.c; else echo e_88595.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > e_88595_.c || rm -f e_88595_.c
-e_88597_.c: e_88597.c $(ANSI2KNR)
- $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/e_88597.c; then echo $(srcdir)/e_88597.c; else echo e_88597.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > e_88597_.c || rm -f e_88597_.c
-e_88599_.c: e_88599.c $(ANSI2KNR)
- $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/e_88599.c; then echo $(srcdir)/e_88599.c; else echo e_88599.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > e_88599_.c || rm -f e_88599_.c
-e_hp8_.c: e_hp8.c $(ANSI2KNR)
- $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/e_hp8.c; then echo $(srcdir)/e_hp8.c; else echo e_hp8.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > e_hp8_.c || rm -f e_hp8_.c
-e_koi8_.c: e_koi8.c $(ANSI2KNR)
- $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/e_koi8.c; then echo $(srcdir)/e_koi8.c; else echo e_koi8.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > e_koi8_.c || rm -f e_koi8_.c
-e_mac_.c: e_mac.c $(ANSI2KNR)
- $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/e_mac.c; then echo $(srcdir)/e_mac.c; else echo e_mac.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > e_mac_.c || rm -f e_mac_.c
-e_pc_.c: e_pc.c $(ANSI2KNR)
- $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/e_pc.c; then echo $(srcdir)/e_pc.c; else echo e_pc.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > e_pc_.c || rm -f e_pc_.c
-e_vms_.c: e_vms.c $(ANSI2KNR)
- $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/e_vms.c; then echo $(srcdir)/e_vms.c; else echo e_vms.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > e_vms_.c || rm -f e_vms_.c
-strhash_.c: strhash.c $(ANSI2KNR)
- $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/strhash.c; then echo $(srcdir)/strhash.c; else echo strhash.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > strhash_.c || rm -f strhash_.c
-afm_.$(OBJEXT) afmparse_.$(OBJEXT) afmtest_.$(OBJEXT) \
-deffont_.$(OBJEXT) e_88591_.$(OBJEXT) e_885910_.$(OBJEXT) \
-e_88592_.$(OBJEXT) e_88593_.$(OBJEXT) e_88594_.$(OBJEXT) \
-e_88595_.$(OBJEXT) e_88597_.$(OBJEXT) e_88599_.$(OBJEXT) \
-e_hp8_.$(OBJEXT) e_koi8_.$(OBJEXT) e_mac_.$(OBJEXT) e_pc_.$(OBJEXT) \
-e_vms_.$(OBJEXT) strhash_.$(OBJEXT) : $(ANSI2KNR)
-uninstall-info-am:
-
-ETAGS = etags
-ETAGSFLAGS =
-
-CTAGS = ctags
-CTAGSFLAGS =
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$tags$$unique" \
- || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique
-
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = ..
-distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkinstalldirs) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(ANSI2KNR) $(LIBRARIES) $(PROGRAMS) $(HEADERS)
-
-installdirs:
-
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -rm -f Makefile $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-krextra clean-noinstLIBRARIES \
- clean-noinstPROGRAMS mostlyclean-am
-
-distclean: distclean-am
-
-distclean-am: clean-am distclean-compile distclean-depend \
- distclean-generic distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-exec-am:
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic mostlyclean-kr
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-info-am
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-krextra clean-noinstLIBRARIES clean-noinstPROGRAMS ctags \
- distclean distclean-compile distclean-depend distclean-generic \
- distclean-tags distdir dvi dvi-am info info-am install \
- install-am install-data install-data-am install-exec \
- install-exec-am install-info install-info-am install-man \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-compile mostlyclean-generic mostlyclean-kr pdf \
- pdf-am ps ps-am tags uninstall uninstall-am uninstall-info-am
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-.TH ANSI2KNR 1 "19 Jan 1996"
-.SH NAME
-ansi2knr \- convert ANSI C to Kernighan & Ritchie C
-.SH SYNOPSIS
-.I ansi2knr
-[--varargs] input_file [output_file]
-.SH DESCRIPTION
-If no output_file is supplied, output goes to stdout.
-.br
-There are no error messages.
-.sp
-.I ansi2knr
-recognizes function definitions by seeing a non-keyword identifier at the left
-margin, followed by a left parenthesis, with a right parenthesis as the last
-character on the line, and with a left brace as the first token on the
-following line (ignoring possible intervening comments). It will recognize a
-multi-line header provided that no intervening line ends with a left or right
-brace or a semicolon. These algorithms ignore whitespace and comments, except
-that the function name must be the first thing on the line.
-.sp
-The following constructs will confuse it:
-.br
- - Any other construct that starts at the left margin and follows the
-above syntax (such as a macro or function call).
-.br
- - Some macros that tinker with the syntax of the function header.
-.sp
-The --varargs switch is obsolete, and is recognized only for
-backwards compatibility. The present version of
-.I ansi2knr
-will always attempt to convert a ... argument to va_alist and va_dcl.
-.SH AUTHOR
-L. Peter Deutsch <ghost@aladdin.com> wrote the original ansi2knr and
-continues to maintain the current version; most of the code in the current
-version is his work. ansi2knr also includes contributions by Francois
-Pinard <pinard@iro.umontreal.ca> and Jim Avera <jima@netcom.com>.
+++ /dev/null
-/* Copyright (C) 1989, 1997 Aladdin Enterprises. All rights reserved. */
-
-/*$Id: ansi2knr.c,v 1.1.1.1 2003/03/05 07:25:50 mtr Exp $*/
-/* Convert ANSI C function definitions to K&R ("traditional C") syntax */
-
-/*
-ansi2knr is distributed in the hope that it will be useful, but WITHOUT ANY
-WARRANTY. No author or distributor accepts responsibility to anyone for the
-consequences of using it or for whether it serves any particular purpose or
-works at all, unless he says so in writing. Refer to the GNU General Public
-License (the "GPL") for full details.
-
-Everyone is granted permission to copy, modify and redistribute ansi2knr,
-but only under the conditions described in the GPL. A copy of this license
-is supposed to have been given to you along with ansi2knr so you can know
-your rights and responsibilities. It should be in a file named COPYLEFT,
-or, if there is no file named COPYLEFT, a file named COPYING. Among other
-things, the copyright notice and this notice must be preserved on all
-copies.
-
-We explicitly state here what we believe is already implied by the GPL: if
-the ansi2knr program is distributed as a separate set of sources and a
-separate executable file which are aggregated on a storage medium together
-with another program, this in itself does not bring the other program under
-the GPL, nor does the mere fact that such a program or the procedures for
-constructing it invoke the ansi2knr executable bring any other part of the
-program under the GPL.
-*/
-
-/*
- * Usage:
- ansi2knr [--filename FILENAME] [INPUT_FILE [OUTPUT_FILE]]
- * --filename provides the file name for the #line directive in the output,
- * overriding input_file (if present).
- * If no input_file is supplied, input is read from stdin.
- * If no output_file is supplied, output goes to stdout.
- * There are no error messages.
- *
- * ansi2knr recognizes function definitions by seeing a non-keyword
- * identifier at the left margin, followed by a left parenthesis,
- * with a right parenthesis as the last character on the line,
- * and with a left brace as the first token on the following line
- * (ignoring possible intervening comments).
- * It will recognize a multi-line header provided that no intervening
- * line ends with a left or right brace or a semicolon.
- * These algorithms ignore whitespace and comments, except that
- * the function name must be the first thing on the line.
- * The following constructs will confuse it:
- * - Any other construct that starts at the left margin and
- * follows the above syntax (such as a macro or function call).
- * - Some macros that tinker with the syntax of the function header.
- */
-
-/*
- * The original and principal author of ansi2knr is L. Peter Deutsch
- * <ghost@aladdin.com>. Other authors are noted in the change history
- * that follows (in reverse chronological order):
- lpd 97-12-08 made input_file optional; only closes input and/or
- output file if not stdin or stdout respectively; prints
- usage message on stderr rather than stdout; adds
- --filename switch (changes suggested by
- <ceder@lysator.liu.se>)
- lpd 96-01-21 added code to cope with not HAVE_CONFIG_H and with
- compilers that don't understand void, as suggested by
- Tom Lane
- lpd 96-01-15 changed to require that the first non-comment token
- on the line following a function header be a left brace,
- to reduce sensitivity to macros, as suggested by Tom Lane
- <tgl@sss.pgh.pa.us>
- lpd 95-06-22 removed #ifndefs whose sole purpose was to define
- undefined preprocessor symbols as 0; changed all #ifdefs
- for configuration symbols to #ifs
- lpd 95-04-05 changed copyright notice to make it clear that
- including ansi2knr in a program does not bring the entire
- program under the GPL
- lpd 94-12-18 added conditionals for systems where ctype macros
- don't handle 8-bit characters properly, suggested by
- Francois Pinard <pinard@iro.umontreal.ca>;
- removed --varargs switch (this is now the default)
- lpd 94-10-10 removed CONFIG_BROKETS conditional
- lpd 94-07-16 added some conditionals to help GNU `configure',
- suggested by Francois Pinard <pinard@iro.umontreal.ca>;
- properly erase prototype args in function parameters,
- contributed by Jim Avera <jima@netcom.com>;
- correct error in writeblanks (it shouldn't erase EOLs)
- lpd 89-xx-xx original version
- */
-
-/* Most of the conditionals here are to make ansi2knr work with */
-/* or without the GNU configure machinery. */
-
-#if HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include <stdio.h>
-#include <ctype.h>
-
-#if HAVE_CONFIG_H
-
-/*
- For properly autoconfiguring ansi2knr, use AC_CONFIG_HEADER(config.h).
- This will define HAVE_CONFIG_H and so, activate the following lines.
- */
-
-# if STDC_HEADERS || HAVE_STRING_H
-# include <string.h>
-# else
-# include <strings.h>
-# endif
-
-#else /* not HAVE_CONFIG_H */
-
-/* Otherwise do it the hard way */
-
-# ifdef BSD
-# include <strings.h>
-# else
-# ifdef VMS
- extern int strlen(), strncmp();
-# else
-# include <string.h>
-# endif
-# endif
-
-#endif /* not HAVE_CONFIG_H */
-
-#if STDC_HEADERS
-# include <stdlib.h>
-#else
-/*
- malloc and free should be declared in stdlib.h,
- but if you've got a K&R compiler, they probably aren't.
- */
-# ifdef MSDOS
-# include <malloc.h>
-# else
-# ifdef VMS
- extern char *malloc();
- extern void free();
-# else
- extern char *malloc();
- extern int free();
-# endif
-# endif
-
-#endif
-
-/*
- * The ctype macros don't always handle 8-bit characters correctly.
- * Compensate for this here.
- */
-#ifdef isascii
-# undef HAVE_ISASCII /* just in case */
-# define HAVE_ISASCII 1
-#else
-#endif
-#if STDC_HEADERS || !HAVE_ISASCII
-# define is_ascii(c) 1
-#else
-# define is_ascii(c) isascii(c)
-#endif
-
-#define is_space(c) (is_ascii(c) && isspace(c))
-#define is_alpha(c) (is_ascii(c) && isalpha(c))
-#define is_alnum(c) (is_ascii(c) && isalnum(c))
-
-/* Scanning macros */
-#define isidchar(ch) (is_alnum(ch) || (ch) == '_')
-#define isidfirstchar(ch) (is_alpha(ch) || (ch) == '_')
-
-/* Forward references */
-char *skipspace();
-int writeblanks();
-int test1();
-int convert1();
-
-/* The main program */
-int
-main(argc, argv)
- int argc;
- char *argv[];
-{ FILE *in = stdin;
- FILE *out = stdout;
- char *filename = 0;
-#define bufsize 5000 /* arbitrary size */
- char *buf;
- char *line;
- char *more;
- char *usage =
- "Usage: ansi2knr [--filename FILENAME] [INPUT_FILE [OUTPUT_FILE]]\n";
- /*
- * In previous versions, ansi2knr recognized a --varargs switch.
- * If this switch was supplied, ansi2knr would attempt to convert
- * a ... argument to va_alist and va_dcl; if this switch was not
- * supplied, ansi2knr would simply drop any such arguments.
- * Now, ansi2knr always does this conversion, and we only
- * check for this switch for backward compatibility.
- */
- int convert_varargs = 1;
-
- while ( argc > 1 && argv[1][0] == '-' ) {
- if ( !strcmp(argv[1], "--varargs") ) {
- convert_varargs = 1;
- argc--;
- argv++;
- continue;
- }
- if ( !strcmp(argv[1], "--filename") && argc > 2 ) {
- filename = argv[2];
- argc -= 2;
- argv += 2;
- continue;
- }
- fprintf(stderr, "Unrecognized switch: %s\n", argv[1]);
- fprintf(stderr, usage);
- exit(1);
- }
- switch ( argc )
- {
- default:
- fprintf(stderr, usage);
- exit(0);
- case 3:
- out = fopen(argv[2], "w");
- if ( out == NULL ) {
- fprintf(stderr, "Cannot open output file %s\n", argv[2]);
- exit(1);
- }
- /* falls through */
- case 2:
- in = fopen(argv[1], "r");
- if ( in == NULL ) {
- fprintf(stderr, "Cannot open input file %s\n", argv[1]);
- exit(1);
- }
- if ( filename == 0 )
- filename = argv[1];
- /* falls through */
- case 1:
- break;
- }
- if ( filename )
- fprintf(out, "#line 1 \"%s\"\n", filename);
- buf = malloc(bufsize);
- line = buf;
- while ( fgets(line, (unsigned)(buf + bufsize - line), in) != NULL )
- {
-test: line += strlen(line);
- switch ( test1(buf) )
- {
- case 2: /* a function header */
- convert1(buf, out, 1, convert_varargs);
- break;
- case 1: /* a function */
- /* Check for a { at the start of the next line. */
- more = ++line;
-f: if ( line >= buf + (bufsize - 1) ) /* overflow check */
- goto wl;
- if ( fgets(line, (unsigned)(buf + bufsize - line), in) == NULL )
- goto wl;
- switch ( *skipspace(more, 1) )
- {
- case '{':
- /* Definitely a function header. */
- convert1(buf, out, 0, convert_varargs);
- fputs(more, out);
- break;
- case 0:
- /* The next line was blank or a comment: */
- /* keep scanning for a non-comment. */
- line += strlen(line);
- goto f;
- default:
- /* buf isn't a function header, but */
- /* more might be. */
- fputs(buf, out);
- strcpy(buf, more);
- line = buf;
- goto test;
- }
- break;
- case -1: /* maybe the start of a function */
- if ( line != buf + (bufsize - 1) ) /* overflow check */
- continue;
- /* falls through */
- default: /* not a function */
-wl: fputs(buf, out);
- break;
- }
- line = buf;
- }
- if ( line != buf )
- fputs(buf, out);
- free(buf);
- if ( out != stdout )
- fclose(out);
- if ( in != stdin )
- fclose(in);
- return 0;
-}
-
-/* Skip over space and comments, in either direction. */
-char *
-skipspace(p, dir)
- register char *p;
- register int dir; /* 1 for forward, -1 for backward */
-{ for ( ; ; )
- { while ( is_space(*p) )
- p += dir;
- if ( !(*p == '/' && p[dir] == '*') )
- break;
- p += dir; p += dir;
- while ( !(*p == '*' && p[dir] == '/') )
- { if ( *p == 0 )
- return p; /* multi-line comment?? */
- p += dir;
- }
- p += dir; p += dir;
- }
- return p;
-}
-
-/*
- * Write blanks over part of a string.
- * Don't overwrite end-of-line characters.
- */
-int
-writeblanks(start, end)
- char *start;
- char *end;
-{ char *p;
- for ( p = start; p < end; p++ )
- if ( *p != '\r' && *p != '\n' )
- *p = ' ';
- return 0;
-}
-
-/*
- * Test whether the string in buf is a function definition.
- * The string may contain and/or end with a newline.
- * Return as follows:
- * 0 - definitely not a function definition;
- * 1 - definitely a function definition;
- * 2 - definitely a function prototype (NOT USED);
- * -1 - may be the beginning of a function definition,
- * append another line and look again.
- * The reason we don't attempt to convert function prototypes is that
- * Ghostscript's declaration-generating macros look too much like
- * prototypes, and confuse the algorithms.
- */
-int
-test1(buf)
- char *buf;
-{ register char *p = buf;
- char *bend;
- char *endfn;
- int contin;
-
- if ( !isidfirstchar(*p) )
- return 0; /* no name at left margin */
- bend = skipspace(buf + strlen(buf) - 1, -1);
- switch ( *bend )
- {
- case ';': contin = 0 /*2*/; break;
- case ')': contin = 1; break;
- case '{': return 0; /* not a function */
- case '}': return 0; /* not a function */
- default: contin = -1;
- }
- while ( isidchar(*p) )
- p++;
- endfn = p;
- p = skipspace(p, 1);
- if ( *p++ != '(' )
- return 0; /* not a function */
- p = skipspace(p, 1);
- if ( *p == ')' )
- return 0; /* no parameters */
- /* Check that the apparent function name isn't a keyword. */
- /* We only need to check for keywords that could be followed */
- /* by a left parenthesis (which, unfortunately, is most of them). */
- { static char *words[] =
- { "asm", "auto", "case", "char", "const", "double",
- "extern", "float", "for", "if", "int", "long",
- "register", "return", "short", "signed", "sizeof",
- "static", "switch", "typedef", "unsigned",
- "void", "volatile", "while", 0
- };
- char **key = words;
- char *kp;
- int len = endfn - buf;
-
- while ( (kp = *key) != 0 )
- { if ( strlen(kp) == len && !strncmp(kp, buf, len) )
- return 0; /* name is a keyword */
- key++;
- }
- }
- return contin;
-}
-
-/* Convert a recognized function definition or header to K&R syntax. */
-int
-convert1(buf, out, header, convert_varargs)
- char *buf;
- FILE *out;
- int header; /* Boolean */
- int convert_varargs; /* Boolean */
-{ char *endfn;
- register char *p;
- /*
- * The breaks table contains pointers to the beginning and end
- * of each argument.
- */
- char **breaks;
- unsigned num_breaks = 2; /* for testing */
- char **btop;
- char **bp;
- char **ap;
- char *vararg = 0;
-
- /* Pre-ANSI implementations don't agree on whether strchr */
- /* is called strchr or index, so we open-code it here. */
- for ( endfn = buf; *(endfn++) != '('; )
- ;
-top: p = endfn;
- breaks = (char **)malloc(sizeof(char *) * num_breaks * 2);
- if ( breaks == 0 )
- { /* Couldn't allocate break table, give up */
- fprintf(stderr, "Unable to allocate break table!\n");
- fputs(buf, out);
- return -1;
- }
- btop = breaks + num_breaks * 2 - 2;
- bp = breaks;
- /* Parse the argument list */
- do
- { int level = 0;
- char *lp = NULL;
- char *rp;
- char *end = NULL;
-
- if ( bp >= btop )
- { /* Filled up break table. */
- /* Allocate a bigger one and start over. */
- free((char *)breaks);
- num_breaks <<= 1;
- goto top;
- }
- *bp++ = p;
- /* Find the end of the argument */
- for ( ; end == NULL; p++ )
- { switch(*p)
- {
- case ',':
- if ( !level ) end = p;
- break;
- case '(':
- if ( !level ) lp = p;
- level++;
- break;
- case ')':
- if ( --level < 0 ) end = p;
- else rp = p;
- break;
- case '/':
- p = skipspace(p, 1) - 1;
- break;
- default:
- ;
- }
- }
- /* Erase any embedded prototype parameters. */
- if ( lp )
- writeblanks(lp + 1, rp);
- p--; /* back up over terminator */
- /* Find the name being declared. */
- /* This is complicated because of procedure and */
- /* array modifiers. */
- for ( ; ; )
- { p = skipspace(p - 1, -1);
- switch ( *p )
- {
- case ']': /* skip array dimension(s) */
- case ')': /* skip procedure args OR name */
- { int level = 1;
- while ( level )
- switch ( *--p )
- {
- case ']': case ')': level++; break;
- case '[': case '(': level--; break;
- case '/': p = skipspace(p, -1) + 1; break;
- default: ;
- }
- }
- if ( *p == '(' && *skipspace(p + 1, 1) == '*' )
- { /* We found the name being declared */
- while ( !isidfirstchar(*p) )
- p = skipspace(p, 1) + 1;
- goto found;
- }
- break;
- default:
- goto found;
- }
- }
-found: if ( *p == '.' && p[-1] == '.' && p[-2] == '.' )
- { if ( convert_varargs )
- { *bp++ = "va_alist";
- vararg = p-2;
- }
- else
- { p++;
- if ( bp == breaks + 1 ) /* sole argument */
- writeblanks(breaks[0], p);
- else
- writeblanks(bp[-1] - 1, p);
- bp--;
- }
- }
- else
- { while ( isidchar(*p) ) p--;
- *bp++ = p+1;
- }
- p = end;
- }
- while ( *p++ == ',' );
- *bp = p;
- /* Make a special check for 'void' arglist */
- if ( bp == breaks+2 )
- { p = skipspace(breaks[0], 1);
- if ( !strncmp(p, "void", 4) )
- { p = skipspace(p+4, 1);
- if ( p == breaks[2] - 1 )
- { bp = breaks; /* yup, pretend arglist is empty */
- writeblanks(breaks[0], p + 1);
- }
- }
- }
- /* Put out the function name and left parenthesis. */
- p = buf;
- while ( p != endfn ) putc(*p, out), p++;
- /* Put out the declaration. */
- if ( header )
- { fputs(");", out);
- for ( p = breaks[0]; *p; p++ )
- if ( *p == '\r' || *p == '\n' )
- putc(*p, out);
- }
- else
- { for ( ap = breaks+1; ap < bp; ap += 2 )
- { p = *ap;
- while ( isidchar(*p) )
- putc(*p, out), p++;
- if ( ap < bp - 1 )
- fputs(", ", out);
- }
- fputs(") ", out);
- /* Put out the argument declarations */
- for ( ap = breaks+2; ap <= bp; ap += 2 )
- (*ap)[-1] = ';';
- if ( vararg != 0 )
- { *vararg = 0;
- fputs(breaks[0], out); /* any prior args */
- fputs("va_dcl", out); /* the final arg */
- fputs(bp[0], out);
- }
- else
- fputs(breaks[0], out);
- }
- free((char *)breaks);
- return 0;
-}
+++ /dev/null
-# Makefile.in generated by automake 1.7 from Makefile.am.
-# @configure_input@
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Makefile template for the compat libaray.
-# Copyright (c) 1995-1999 Markku Rossi.
-#
-# Author: Markku Rossi <mtr@iki.fi>
-#
-
-#
-# This file is part of GNU enscript.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; see the file COPYING. If not, write to
-# the Free Software Foundation, 51 Franklin Street, Fifth Floor,
-# Boston, MA 02110-1301, USA.
-#
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
-
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_triplet = @host@
-ACLOCAL = @ACLOCAL@
-ALLOCA = @ALLOCA@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
-CATOBJEXT = @CATOBJEXT@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DATADIRNAME = @DATADIRNAME@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GENCAT = @GENCAT@
-GLIBC21 = @GLIBC21@
-GMSGFMT = @GMSGFMT@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTOBJEXT = @INSTOBJEXT@
-INTLBISON = @INTLBISON@
-INTLLIBS = @INTLLIBS@
-INTLOBJS = @INTLOBJS@
-INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
-LDFLAGS = @LDFLAGS@
-LEX = @LEX@
-LEXLIB = @LEXLIB@
-LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MEDIA = @MEDIA@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-MSGFMT = @MSGFMT@
-MSGMERGE = @MSGMERGE@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-POSUB = @POSUB@
-PSLEVEL = @PSLEVEL@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SPOOLER = @SPOOLER@
-STRIP = @STRIP@
-U = @U@
-USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-YACC = @YACC@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__include = @am__include@
-am__quote = @am__quote@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-
-AUTOMAKE_OPTIONS = no-dependencies
-
-noinst_LIBRARIES = libcompat.a
-libcompat_a_SOURCES = getopt.c getopt1.c xalloc.c regex.c
-libcompat_a_LIBADD = @LIBOBJS@ @ALLOCA@
-libcompat_a_DEPENDENCIES = @LIBOBJS@ @ALLOCA@
-
-libcompat_a_SOURCES_windelta = \
- +../w32/gethostname.c \
- +../w32/getpwd.c \
- +../w32/getuid.c
-
-
-noinst_HEADERS = getopt.h regex.h xalloc.h
-
-EXTRA_DIST = strerror.c memmove.c memcpy.c strtol.c strtoul.c
-
-INCLUDES = -I$(srcdir)/../intl -I../intl
-
-INCLUDES_windelta = +-I../w32
-subdir = compat
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-LIBRARIES = $(noinst_LIBRARIES)
-
-libcompat_a_AR = $(AR) cru
-am_libcompat_a_OBJECTS = getopt.$(OBJEXT) getopt1.$(OBJEXT) \
- xalloc.$(OBJEXT) regex.$(OBJEXT)
-libcompat_a_OBJECTS = $(am_libcompat_a_OBJECTS)
-
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
-depcomp =
-am__depfiles_maybe =
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-DIST_SOURCES = $(libcompat_a_SOURCES)
-HEADERS = $(noinst_HEADERS)
-
-DIST_COMMON = $(noinst_HEADERS) ChangeLog Makefile.am Makefile.in \
- alloca.c memcpy.c memmove.c strerror.c strtoul.c
-SOURCES = $(libcompat_a_SOURCES)
-
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .o .obj
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu compat/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
-
-AR = ar
-
-clean-noinstLIBRARIES:
- -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-libcompat.a: $(libcompat_a_OBJECTS) $(libcompat_a_DEPENDENCIES)
- -rm -f libcompat.a
- $(libcompat_a_AR) libcompat.a $(libcompat_a_OBJECTS) $(libcompat_a_LIBADD)
- $(RANLIB) libcompat.a
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT) core *.core
-
-distclean-compile:
- -rm -f *.tab.c
-
-.c.o:
- $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
-
-.c.obj:
- $(COMPILE) -c `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'`
-uninstall-info-am:
-
-ETAGS = etags
-ETAGSFLAGS =
-
-CTAGS = ctags
-CTAGSFLAGS =
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$tags$$unique" \
- || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique
-
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = ..
-distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkinstalldirs) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(LIBRARIES) $(HEADERS)
-
-installdirs:
-
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -rm -f Makefile $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am
-
-distclean: distclean-am
-
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-exec-am:
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-info-am
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-noinstLIBRARIES ctags distclean distclean-compile \
- distclean-generic distclean-tags distdir dvi dvi-am info \
- info-am install install-am install-data install-data-am \
- install-exec install-exec-am install-info install-info-am \
- install-man install-strip installcheck installcheck-am \
- installdirs maintainer-clean maintainer-clean-generic \
- mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \
- ps ps-am tags uninstall uninstall-am uninstall-info-am
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-#! /bin/sh
-# Attempt to guess a canonical system name.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002 Free Software Foundation, Inc.
-
-timestamp='2002-09-03'
-
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Per Bothner <per@bothner.com>.
-# Please send patches to <config-patches@gnu.org>. Submit a context
-# diff and a properly formatted ChangeLog entry.
-#
-# This script attempts to guess a canonical system name similar to
-# config.sub. If it succeeds, it prints the system name on stdout, and
-# exits with 0. Otherwise, it exits with 1.
-#
-# The plan is that this can be called by configure scripts if you
-# don't specify an explicit build system type.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION]
-
-Output the configuration name of the system \`$me' is run on.
-
-Operation modes:
- -h, --help print this help, then exit
- -t, --time-stamp print date of last modification, then exit
- -v, --version print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.guess ($timestamp)
-
-Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
- case $1 in
- --time-stamp | --time* | -t )
- echo "$timestamp" ; exit 0 ;;
- --version | -v )
- echo "$version" ; exit 0 ;;
- --help | --h* | -h )
- echo "$usage"; exit 0 ;;
- -- ) # Stop option processing
- shift; break ;;
- - ) # Use stdin as input.
- break ;;
- -* )
- echo "$me: invalid option $1$help" >&2
- exit 1 ;;
- * )
- break ;;
- esac
-done
-
-if test $# != 0; then
- echo "$me: too many arguments$help" >&2
- exit 1
-fi
-
-trap 'exit 1' 1 2 15
-
-# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
-# compiler to aid in system detection is discouraged as it requires
-# temporary files to be created and, as you can see below, it is a
-# headache to deal with in a portable fashion.
-
-# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
-# use `HOST_CC' if defined, but it is deprecated.
-
-# This shell variable is my proudest work .. or something. --bje
-
-set_cc_for_build='tmpdir=${TMPDIR-/tmp}/config-guess-$$ ;
-(old=`umask` && umask 077 && mkdir $tmpdir && umask $old && unset old)
- || (echo "$me: cannot create $tmpdir" >&2 && exit 1) ;
-dummy=$tmpdir/dummy ;
-files="$dummy.c $dummy.o $dummy.rel $dummy" ;
-trap '"'"'rm -f $files; rmdir $tmpdir; exit 1'"'"' 1 2 15 ;
-case $CC_FOR_BUILD,$HOST_CC,$CC in
- ,,) echo "int x;" > $dummy.c ;
- for c in cc gcc c89 c99 ; do
- if ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1 ; then
- CC_FOR_BUILD="$c"; break ;
- fi ;
- done ;
- rm -f $files ;
- if test x"$CC_FOR_BUILD" = x ; then
- CC_FOR_BUILD=no_compiler_found ;
- fi
- ;;
- ,,*) CC_FOR_BUILD=$CC ;;
- ,*,*) CC_FOR_BUILD=$HOST_CC ;;
-esac ;
-unset files'
-
-# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# (ghazi@noc.rutgers.edu 1994-08-24)
-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
- PATH=$PATH:/.attbin ; export PATH
-fi
-
-UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
-UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
-UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-
-# Note: order is significant - the case branches are not exclusive.
-
-case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
- *:NetBSD:*:*)
- # NetBSD (nbsd) targets should (where applicable) match one or
- # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
- # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
- # switched to ELF, *-*-netbsd* would select the old
- # object file format. This provides both forward
- # compatibility and a consistent mechanism for selecting the
- # object file format.
- #
- # Note: NetBSD doesn't particularly care about the vendor
- # portion of the name. We always set it to "unknown".
- sysctl="sysctl -n hw.machine_arch"
- UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
- /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
- case "${UNAME_MACHINE_ARCH}" in
- armeb) machine=armeb-unknown ;;
- arm*) machine=arm-unknown ;;
- sh3el) machine=shl-unknown ;;
- sh3eb) machine=sh-unknown ;;
- *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
- esac
- # The Operating System including object format, if it has switched
- # to ELF recently, or will in the future.
- case "${UNAME_MACHINE_ARCH}" in
- arm*|i386|m68k|ns32k|sh3*|sparc|vax)
- eval $set_cc_for_build
- if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
- | grep __ELF__ >/dev/null
- then
- # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
- # Return netbsd for either. FIX?
- os=netbsd
- else
- os=netbsdelf
- fi
- ;;
- *)
- os=netbsd
- ;;
- esac
- # The OS release
- release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
- # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
- # contains redundant information, the shorter form:
- # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
- echo "${machine}-${os}${release}"
- exit 0 ;;
- amiga:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- arc:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- hp300:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mac68k:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- macppc:OpenBSD:*:*)
- echo powerpc-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvme68k:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvme88k:OpenBSD:*:*)
- echo m88k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- mvmeppc:OpenBSD:*:*)
- echo powerpc-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- pmax:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- sgi:OpenBSD:*:*)
- echo mipseb-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- sun3:OpenBSD:*:*)
- echo m68k-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- wgrisc:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- *:OpenBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
- alpha:OSF1:*:*)
- if test $UNAME_RELEASE = "V4.0"; then
- UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
- fi
- # A Vn.n version is a released version.
- # A Tn.n version is a released field test version.
- # A Xn.n version is an unreleased experimental baselevel.
- # 1.2 uses "1.2" for uname -r.
- eval $set_cc_for_build
- cat <<EOF >$dummy.s
- .data
-\$Lformat:
- .byte 37,100,45,37,120,10,0 # "%d-%x\n"
-
- .text
- .globl main
- .align 4
- .ent main
-main:
- .frame \$30,16,\$26,0
- ldgp \$29,0(\$27)
- .prologue 1
- .long 0x47e03d80 # implver \$0
- lda \$2,-1
- .long 0x47e20c21 # amask \$2,\$1
- lda \$16,\$Lformat
- mov \$0,\$17
- not \$1,\$18
- jsr \$26,printf
- ldgp \$29,0(\$26)
- mov 0,\$16
- jsr \$26,exit
- .end main
-EOF
- $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
- if test "$?" = 0 ; then
- case `$dummy` in
- 0-0)
- UNAME_MACHINE="alpha"
- ;;
- 1-0)
- UNAME_MACHINE="alphaev5"
- ;;
- 1-1)
- UNAME_MACHINE="alphaev56"
- ;;
- 1-101)
- UNAME_MACHINE="alphapca56"
- ;;
- 2-303)
- UNAME_MACHINE="alphaev6"
- ;;
- 2-307)
- UNAME_MACHINE="alphaev67"
- ;;
- 2-1307)
- UNAME_MACHINE="alphaev68"
- ;;
- 3-1307)
- UNAME_MACHINE="alphaev7"
- ;;
- esac
- fi
- rm -f $dummy.s $dummy && rmdir $tmpdir
- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- exit 0 ;;
- Alpha\ *:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # Should we change UNAME_MACHINE based on the output of uname instead
- # of the specific Alpha model?
- echo alpha-pc-interix
- exit 0 ;;
- 21064:Windows_NT:50:3)
- echo alpha-dec-winnt3.5
- exit 0 ;;
- Amiga*:UNIX_System_V:4.0:*)
- echo m68k-unknown-sysv4
- exit 0;;
- *:[Aa]miga[Oo][Ss]:*:*)
- echo ${UNAME_MACHINE}-unknown-amigaos
- exit 0 ;;
- *:[Mm]orph[Oo][Ss]:*:*)
- echo ${UNAME_MACHINE}-unknown-morphos
- exit 0 ;;
- *:OS/390:*:*)
- echo i370-ibm-openedition
- exit 0 ;;
- arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
- echo arm-acorn-riscix${UNAME_RELEASE}
- exit 0;;
- SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
- echo hppa1.1-hitachi-hiuxmpp
- exit 0;;
- Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
- # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
- if test "`(/bin/universe) 2>/dev/null`" = att ; then
- echo pyramid-pyramid-sysv3
- else
- echo pyramid-pyramid-bsd
- fi
- exit 0 ;;
- NILE*:*:*:dcosx)
- echo pyramid-pyramid-svr4
- exit 0 ;;
- DRS?6000:UNIX_SV:4.2*:7*)
- case `/usr/bin/uname -p` in
- sparc) echo sparc-icl-nx7 && exit 0 ;;
- esac ;;
- sun4H:SunOS:5.*:*)
- echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
- echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- i86pc:SunOS:5.*:*)
- echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- sun4*:SunOS:6*:*)
- # According to config.sub, this is the proper way to canonicalize
- # SunOS6. Hard to guess exactly what SunOS6 will be like, but
- # it's likely to be more like Solaris than SunOS4.
- echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- sun4*:SunOS:*:*)
- case "`/usr/bin/arch -k`" in
- Series*|S4*)
- UNAME_RELEASE=`uname -v`
- ;;
- esac
- # Japanese Language versions have a version number like `4.1.3-JL'.
- echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
- exit 0 ;;
- sun3*:SunOS:*:*)
- echo m68k-sun-sunos${UNAME_RELEASE}
- exit 0 ;;
- sun*:*:4.2BSD:*)
- UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
- test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
- case "`/bin/arch`" in
- sun3)
- echo m68k-sun-sunos${UNAME_RELEASE}
- ;;
- sun4)
- echo sparc-sun-sunos${UNAME_RELEASE}
- ;;
- esac
- exit 0 ;;
- aushp:SunOS:*:*)
- echo sparc-auspex-sunos${UNAME_RELEASE}
- exit 0 ;;
- # The situation for MiNT is a little confusing. The machine name
- # can be virtually everything (everything which is not
- # "atarist" or "atariste" at least should have a processor
- # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
- # to the lowercase version "mint" (or "freemint"). Finally
- # the system name "TOS" denotes a system which is actually not
- # MiNT. But MiNT is downward compatible to TOS, so this should
- # be no problem.
- atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit 0 ;;
- atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit 0 ;;
- *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit 0 ;;
- milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
- echo m68k-milan-mint${UNAME_RELEASE}
- exit 0 ;;
- hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
- echo m68k-hades-mint${UNAME_RELEASE}
- exit 0 ;;
- *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
- echo m68k-unknown-mint${UNAME_RELEASE}
- exit 0 ;;
- powerpc:machten:*:*)
- echo powerpc-apple-machten${UNAME_RELEASE}
- exit 0 ;;
- RISC*:Mach:*:*)
- echo mips-dec-mach_bsd4.3
- exit 0 ;;
- RISC*:ULTRIX:*:*)
- echo mips-dec-ultrix${UNAME_RELEASE}
- exit 0 ;;
- VAX*:ULTRIX*:*:*)
- echo vax-dec-ultrix${UNAME_RELEASE}
- exit 0 ;;
- 2020:CLIX:*:* | 2430:CLIX:*:*)
- echo clipper-intergraph-clix${UNAME_RELEASE}
- exit 0 ;;
- mips:*:*:UMIPS | mips:*:*:RISCos)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
-#ifdef __cplusplus
-#include <stdio.h> /* for printf() prototype */
- int main (int argc, char *argv[]) {
-#else
- int main (argc, argv) int argc; char *argv[]; {
-#endif
- #if defined (host_mips) && defined (MIPSEB)
- #if defined (SYSTYPE_SYSV)
- printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
- #endif
- #if defined (SYSTYPE_SVR4)
- printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
- #endif
- #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
- printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
- #endif
- #endif
- exit (-1);
- }
-EOF
- $CC_FOR_BUILD $dummy.c -o $dummy \
- && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
- && rm -f $dummy.c $dummy && rmdir $tmpdir && exit 0
- rm -f $dummy.c $dummy && rmdir $tmpdir
- echo mips-mips-riscos${UNAME_RELEASE}
- exit 0 ;;
- Motorola:PowerMAX_OS:*:*)
- echo powerpc-motorola-powermax
- exit 0 ;;
- Motorola:*:4.3:PL8-*)
- echo powerpc-harris-powermax
- exit 0 ;;
- Night_Hawk:*:*:PowerMAX_OS)
- echo powerpc-harris-powermax
- exit 0 ;;
- Night_Hawk:Power_UNIX:*:*)
- echo powerpc-harris-powerunix
- exit 0 ;;
- m88k:CX/UX:7*:*)
- echo m88k-harris-cxux7
- exit 0 ;;
- m88k:*:4*:R4*)
- echo m88k-motorola-sysv4
- exit 0 ;;
- m88k:*:3*:R3*)
- echo m88k-motorola-sysv3
- exit 0 ;;
- AViiON:dgux:*:*)
- # DG/UX returns AViiON for all architectures
- UNAME_PROCESSOR=`/usr/bin/uname -p`
- if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
- then
- if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
- [ ${TARGET_BINARY_INTERFACE}x = x ]
- then
- echo m88k-dg-dgux${UNAME_RELEASE}
- else
- echo m88k-dg-dguxbcs${UNAME_RELEASE}
- fi
- else
- echo i586-dg-dgux${UNAME_RELEASE}
- fi
- exit 0 ;;
- M88*:DolphinOS:*:*) # DolphinOS (SVR3)
- echo m88k-dolphin-sysv3
- exit 0 ;;
- M88*:*:R3*:*)
- # Delta 88k system running SVR3
- echo m88k-motorola-sysv3
- exit 0 ;;
- XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
- echo m88k-tektronix-sysv3
- exit 0 ;;
- Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
- echo m68k-tektronix-bsd
- exit 0 ;;
- *:IRIX*:*:*)
- echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
- exit 0 ;;
- ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
- echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
- exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX '
- i*86:AIX:*:*)
- echo i386-ibm-aix
- exit 0 ;;
- ia64:AIX:*:*)
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
- else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
- fi
- echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
- exit 0 ;;
- *:AIX:2:3)
- if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <sys/systemcfg.h>
-
- main()
- {
- if (!__power_pc())
- exit(1);
- puts("powerpc-ibm-aix3.2.5");
- exit(0);
- }
-EOF
- $CC_FOR_BUILD $dummy.c -o $dummy && $dummy && rm -f $dummy.c $dummy && rmdir $tmpdir && exit 0
- rm -f $dummy.c $dummy && rmdir $tmpdir
- echo rs6000-ibm-aix3.2.5
- elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
- echo rs6000-ibm-aix3.2.4
- else
- echo rs6000-ibm-aix3.2
- fi
- exit 0 ;;
- *:AIX:*:[45])
- IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
- if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
- IBM_ARCH=rs6000
- else
- IBM_ARCH=powerpc
- fi
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
- else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
- fi
- echo ${IBM_ARCH}-ibm-aix${IBM_REV}
- exit 0 ;;
- *:AIX:*:*)
- echo rs6000-ibm-aix
- exit 0 ;;
- ibmrt:4.4BSD:*|romp-ibm:BSD:*)
- echo romp-ibm-bsd4.4
- exit 0 ;;
- ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
- echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
- exit 0 ;; # report: romp-ibm BSD 4.3
- *:BOSX:*:*)
- echo rs6000-bull-bosx
- exit 0 ;;
- DPX/2?00:B.O.S.:*:*)
- echo m68k-bull-sysv3
- exit 0 ;;
- 9000/[34]??:4.3bsd:1.*:*)
- echo m68k-hp-bsd
- exit 0 ;;
- hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
- echo m68k-hp-bsd4.4
- exit 0 ;;
- 9000/[34678]??:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- case "${UNAME_MACHINE}" in
- 9000/31? ) HP_ARCH=m68000 ;;
- 9000/[34]?? ) HP_ARCH=m68k ;;
- 9000/[678][0-9][0-9])
- if [ -x /usr/bin/getconf ]; then
- sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
- sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
- case "${sc_cpu_version}" in
- 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
- 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
- 532) # CPU_PA_RISC2_0
- case "${sc_kernel_bits}" in
- 32) HP_ARCH="hppa2.0n" ;;
- 64) HP_ARCH="hppa2.0w" ;;
- '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
- esac ;;
- esac
- fi
- if [ "${HP_ARCH}" = "" ]; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
-
- #define _HPUX_SOURCE
- #include <stdlib.h>
- #include <unistd.h>
-
- int main ()
- {
- #if defined(_SC_KERNEL_BITS)
- long bits = sysconf(_SC_KERNEL_BITS);
- #endif
- long cpu = sysconf (_SC_CPU_VERSION);
-
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
- case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
- case CPU_PA_RISC2_0:
- #if defined(_SC_KERNEL_BITS)
- switch (bits)
- {
- case 64: puts ("hppa2.0w"); break;
- case 32: puts ("hppa2.0n"); break;
- default: puts ("hppa2.0"); break;
- } break;
- #else /* !defined(_SC_KERNEL_BITS) */
- puts ("hppa2.0"); break;
- #endif
- default: puts ("hppa1.0"); break;
- }
- exit (0);
- }
-EOF
- (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null) && HP_ARCH=`$dummy`
- if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi
- rm -f $dummy.c $dummy && rmdir $tmpdir
- fi ;;
- esac
- echo ${HP_ARCH}-hp-hpux${HPUX_REV}
- exit 0 ;;
- ia64:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- echo ia64-hp-hpux${HPUX_REV}
- exit 0 ;;
- 3050*:HI-UX:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <unistd.h>
- int
- main ()
- {
- long cpu = sysconf (_SC_CPU_VERSION);
- /* The order matters, because CPU_IS_HP_MC68K erroneously returns
- true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
- results, however. */
- if (CPU_IS_PA_RISC (cpu))
- {
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
- case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
- case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
- default: puts ("hppa-hitachi-hiuxwe2"); break;
- }
- }
- else if (CPU_IS_HP_MC68K (cpu))
- puts ("m68k-hitachi-hiuxwe2");
- else puts ("unknown-hitachi-hiuxwe2");
- exit (0);
- }
-EOF
- $CC_FOR_BUILD $dummy.c -o $dummy && $dummy && rm -f $dummy.c $dummy && rmdir $tmpdir && exit 0
- rm -f $dummy.c $dummy && rmdir $tmpdir
- echo unknown-hitachi-hiuxwe2
- exit 0 ;;
- 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
- echo hppa1.1-hp-bsd
- exit 0 ;;
- 9000/8??:4.3bsd:*:*)
- echo hppa1.0-hp-bsd
- exit 0 ;;
- *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
- echo hppa1.0-hp-mpeix
- exit 0 ;;
- hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
- echo hppa1.1-hp-osf
- exit 0 ;;
- hp8??:OSF1:*:*)
- echo hppa1.0-hp-osf
- exit 0 ;;
- i*86:OSF1:*:*)
- if [ -x /usr/sbin/sysversion ] ; then
- echo ${UNAME_MACHINE}-unknown-osf1mk
- else
- echo ${UNAME_MACHINE}-unknown-osf1
- fi
- exit 0 ;;
- parisc*:Lites*:*:*)
- echo hppa1.1-hp-lites
- exit 0 ;;
- C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
- echo c1-convex-bsd
- exit 0 ;;
- C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit 0 ;;
- C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
- echo c34-convex-bsd
- exit 0 ;;
- C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
- echo c38-convex-bsd
- exit 0 ;;
- C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
- echo c4-convex-bsd
- exit 0 ;;
- CRAY*Y-MP:*:*:*)
- echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY*[A-Z]90:*:*:*)
- echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
- | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
- -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
- -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY*TS:*:*:*)
- echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY*T3D:*:*:*)
- echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY*T3E:*:*:*)
- echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- CRAY*SV1:*:*:*)
- echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit 0 ;;
- F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
- FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
- echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit 0 ;;
- i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
- echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
- exit 0 ;;
- sparc*:BSD/OS:*:*)
- echo sparc-unknown-bsdi${UNAME_RELEASE}
- exit 0 ;;
- *:BSD/OS:*:*)
- echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
- exit 0 ;;
- *:FreeBSD:*:*)
- # Determine whether the default compiler uses glibc.
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <features.h>
- #if __GLIBC__ >= 2
- LIBC=gnu
- #else
- LIBC=
- #endif
-EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
- rm -f $dummy.c && rmdir $tmpdir
- echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC}
- exit 0 ;;
- i*:CYGWIN*:*)
- echo ${UNAME_MACHINE}-pc-cygwin
- exit 0 ;;
- i*:MINGW*:*)
- echo ${UNAME_MACHINE}-pc-mingw32
- exit 0 ;;
- i*:PW*:*)
- echo ${UNAME_MACHINE}-pc-pw32
- exit 0 ;;
- x86:Interix*:3*)
- echo i386-pc-interix3
- exit 0 ;;
- i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
- # UNAME_MACHINE based on the output of uname instead of i386?
- echo i386-pc-interix
- exit 0 ;;
- i*:UWIN*:*)
- echo ${UNAME_MACHINE}-pc-uwin
- exit 0 ;;
- p*:CYGWIN*:*)
- echo powerpcle-unknown-cygwin
- exit 0 ;;
- prep*:SunOS:5.*:*)
- echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit 0 ;;
- *:GNU:*:*)
- echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
- exit 0 ;;
- i*86:Minix:*:*)
- echo ${UNAME_MACHINE}-pc-minix
- exit 0 ;;
- arm*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- ia64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- m68*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- mips:Linux:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #undef CPU
- #undef mips
- #undef mipsel
- #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
- CPU=mipsel
- #else
- #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
- CPU=mips
- #else
- CPU=
- #endif
- #endif
-EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
- rm -f $dummy.c && rmdir $tmpdir
- test x"${CPU}" != x && echo "${CPU}-pc-linux-gnu" && exit 0
- ;;
- ppc:Linux:*:*)
- echo powerpc-unknown-linux-gnu
- exit 0 ;;
- ppc64:Linux:*:*)
- echo powerpc64-unknown-linux-gnu
- exit 0 ;;
- alpha:Linux:*:*)
- case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
- EV5) UNAME_MACHINE=alphaev5 ;;
- EV56) UNAME_MACHINE=alphaev56 ;;
- PCA56) UNAME_MACHINE=alphapca56 ;;
- PCA57) UNAME_MACHINE=alphapca56 ;;
- EV6) UNAME_MACHINE=alphaev6 ;;
- EV67) UNAME_MACHINE=alphaev67 ;;
- EV68*) UNAME_MACHINE=alphaev68 ;;
- esac
- objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
- if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
- echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
- exit 0 ;;
- parisc:Linux:*:* | hppa:Linux:*:*)
- # Look for CPU level
- case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
- PA7*) echo hppa1.1-unknown-linux-gnu ;;
- PA8*) echo hppa2.0-unknown-linux-gnu ;;
- *) echo hppa-unknown-linux-gnu ;;
- esac
- exit 0 ;;
- parisc64:Linux:*:* | hppa64:Linux:*:*)
- echo hppa64-unknown-linux-gnu
- exit 0 ;;
- s390:Linux:*:* | s390x:Linux:*:*)
- echo ${UNAME_MACHINE}-ibm-linux
- exit 0 ;;
- sh*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- sparc:Linux:*:* | sparc64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit 0 ;;
- x86_64:Linux:*:*)
- echo x86_64-unknown-linux-gnu
- exit 0 ;;
- i*86:Linux:*:*)
- # The BFD linker knows what the default object file format is, so
- # first see if it will tell us. cd to the root directory to prevent
- # problems with other programs or directories called `ld' in the path.
- # Set LC_ALL=C to ensure ld outputs messages in English.
- ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
- | sed -ne '/supported targets:/!d
- s/[ ][ ]*/ /g
- s/.*supported targets: *//
- s/ .*//
- p'`
- case "$ld_supported_targets" in
- elf32-i386)
- TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
- ;;
- a.out-i386-linux)
- echo "${UNAME_MACHINE}-pc-linux-gnuaout"
- exit 0 ;;
- coff-i386)
- echo "${UNAME_MACHINE}-pc-linux-gnucoff"
- exit 0 ;;
- "")
- # Either a pre-BFD a.out linker (linux-gnuoldld) or
- # one that does not give us useful --help.
- echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
- exit 0 ;;
- esac
- # Determine whether the default compiler is a.out or elf
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <features.h>
- #ifdef __ELF__
- # ifdef __GLIBC__
- # if __GLIBC__ >= 2
- LIBC=gnu
- # else
- LIBC=gnulibc1
- # endif
- # else
- LIBC=gnulibc1
- # endif
- #else
- #ifdef __INTEL_COMPILER
- LIBC=gnu
- #else
- LIBC=gnuaout
- #endif
- #endif
-EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
- rm -f $dummy.c && rmdir $tmpdir
- test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0
- test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
- ;;
- i*86:DYNIX/ptx:4*:*)
- # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
- # earlier versions are messed up and put the nodename in both
- # sysname and nodename.
- echo i386-sequent-sysv4
- exit 0 ;;
- i*86:UNIX_SV:4.2MP:2.*)
- # Unixware is an offshoot of SVR4, but it has its own version
- # number series starting with 2...
- # I am not positive that other SVR4 systems won't match this,
- # I just have to hope. -- rms.
- # Use sysv4.2uw... so that sysv4* matches it.
- echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
- exit 0 ;;
- i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
- UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
- if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
- echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
- else
- echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
- fi
- exit 0 ;;
- i*86:*:5:[78]*)
- case `/bin/uname -X | grep "^Machine"` in
- *486*) UNAME_MACHINE=i486 ;;
- *Pentium) UNAME_MACHINE=i586 ;;
- *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
- esac
- echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
- exit 0 ;;
- i*86:*:3.2:*)
- if test -f /usr/options/cb.name; then
- UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
- echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
- elif /bin/uname -X 2>/dev/null >/dev/null ; then
- UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
- (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
- (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
- && UNAME_MACHINE=i586
- (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
- && UNAME_MACHINE=i686
- (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
- && UNAME_MACHINE=i686
- echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
- else
- echo ${UNAME_MACHINE}-pc-sysv32
- fi
- exit 0 ;;
- i*86:*DOS:*:*)
- echo ${UNAME_MACHINE}-pc-msdosdjgpp
- exit 0 ;;
- pc:*:*:*)
- # Left here for compatibility:
- # uname -m prints for DJGPP always 'pc', but it prints nothing about
- # the processor, so we play safe by assuming i386.
- echo i386-pc-msdosdjgpp
- exit 0 ;;
- Intel:Mach:3*:*)
- echo i386-pc-mach3
- exit 0 ;;
- paragon:*:*:*)
- echo i860-intel-osf1
- exit 0 ;;
- i860:*:4.*:*) # i860-SVR4
- if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
- echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
- else # Add other i860-SVR4 vendors below as they are discovered.
- echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
- fi
- exit 0 ;;
- mini*:CTIX:SYS*5:*)
- # "miniframe"
- echo m68010-convergent-sysv
- exit 0 ;;
- mc68k:UNIX:SYSTEM5:3.51m)
- echo m68k-convergent-sysv
- exit 0 ;;
- M68*:*:R3V[567]*:*)
- test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
- 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0)
- OS_REL=''
- test -r /etc/.relid \
- && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && echo i486-ncr-sysv4.3${OS_REL} && exit 0
- /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
- && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
- 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && echo i486-ncr-sysv4 && exit 0 ;;
- m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
- echo m68k-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- mc68030:UNIX_System_V:4.*:*)
- echo m68k-atari-sysv4
- exit 0 ;;
- i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
- echo i386-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- TSUNAMI:LynxOS:2.*:*)
- echo sparc-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- rs6000:LynxOS:2.*:*)
- echo rs6000-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
- echo powerpc-unknown-lynxos${UNAME_RELEASE}
- exit 0 ;;
- SM[BE]S:UNIX_SV:*:*)
- echo mips-dde-sysv${UNAME_RELEASE}
- exit 0 ;;
- RM*:ReliantUNIX-*:*:*)
- echo mips-sni-sysv4
- exit 0 ;;
- RM*:SINIX-*:*:*)
- echo mips-sni-sysv4
- exit 0 ;;
- *:SINIX-*:*:*)
- if uname -p 2>/dev/null >/dev/null ; then
- UNAME_MACHINE=`(uname -p) 2>/dev/null`
- echo ${UNAME_MACHINE}-sni-sysv4
- else
- echo ns32k-sni-sysv
- fi
- exit 0 ;;
- PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
- # says <Richard.M.Bartel@ccMail.Census.GOV>
- echo i586-unisys-sysv4
- exit 0 ;;
- *:UNIX_System_V:4*:FTX*)
- # From Gerald Hewes <hewes@openmarket.com>.
- # How about differentiating between stratus architectures? -djm
- echo hppa1.1-stratus-sysv4
- exit 0 ;;
- *:*:*:FTX*)
- # From seanf@swdc.stratus.com.
- echo i860-stratus-sysv4
- exit 0 ;;
- *:VOS:*:*)
- # From Paul.Green@stratus.com.
- echo hppa1.1-stratus-vos
- exit 0 ;;
- mc68*:A/UX:*:*)
- echo m68k-apple-aux${UNAME_RELEASE}
- exit 0 ;;
- news*:NEWS-OS:6*:*)
- echo mips-sony-newsos6
- exit 0 ;;
- R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
- if [ -d /usr/nec ]; then
- echo mips-nec-sysv${UNAME_RELEASE}
- else
- echo mips-unknown-sysv${UNAME_RELEASE}
- fi
- exit 0 ;;
- BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
- echo powerpc-be-beos
- exit 0 ;;
- BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
- echo powerpc-apple-beos
- exit 0 ;;
- BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
- echo i586-pc-beos
- exit 0 ;;
- SX-4:SUPER-UX:*:*)
- echo sx4-nec-superux${UNAME_RELEASE}
- exit 0 ;;
- SX-5:SUPER-UX:*:*)
- echo sx5-nec-superux${UNAME_RELEASE}
- exit 0 ;;
- SX-6:SUPER-UX:*:*)
- echo sx6-nec-superux${UNAME_RELEASE}
- exit 0 ;;
- Power*:Rhapsody:*:*)
- echo powerpc-apple-rhapsody${UNAME_RELEASE}
- exit 0 ;;
- *:Rhapsody:*:*)
- echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
- exit 0 ;;
- *:Darwin:*:*)
- echo `uname -p`-apple-darwin${UNAME_RELEASE}
- exit 0 ;;
- *:procnto*:*:* | *:QNX:[0123456789]*:*)
- UNAME_PROCESSOR=`uname -p`
- if test "$UNAME_PROCESSOR" = "x86"; then
- UNAME_PROCESSOR=i386
- UNAME_MACHINE=pc
- fi
- echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
- exit 0 ;;
- *:QNX:*:4*)
- echo i386-pc-qnx
- exit 0 ;;
- NSR-[DGKLNPTVW]:NONSTOP_KERNEL:*:*)
- echo nsr-tandem-nsk${UNAME_RELEASE}
- exit 0 ;;
- *:NonStop-UX:*:*)
- echo mips-compaq-nonstopux
- exit 0 ;;
- BS2000:POSIX*:*:*)
- echo bs2000-siemens-sysv
- exit 0 ;;
- DS/*:UNIX_System_V:*:*)
- echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
- exit 0 ;;
- *:Plan9:*:*)
- # "uname -m" is not consistent, so use $cputype instead. 386
- # is converted to i386 for consistency with other x86
- # operating systems.
- if test "$cputype" = "386"; then
- UNAME_MACHINE=i386
- else
- UNAME_MACHINE="$cputype"
- fi
- echo ${UNAME_MACHINE}-unknown-plan9
- exit 0 ;;
- i*86:OS/2:*:*)
- # If we were able to find `uname', then EMX Unix compatibility
- # is probably installed.
- echo ${UNAME_MACHINE}-pc-os2-emx
- exit 0 ;;
- *:TOPS-10:*:*)
- echo pdp10-unknown-tops10
- exit 0 ;;
- *:TENEX:*:*)
- echo pdp10-unknown-tenex
- exit 0 ;;
- KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
- echo pdp10-dec-tops20
- exit 0 ;;
- XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
- echo pdp10-xkl-tops20
- exit 0 ;;
- *:TOPS-20:*:*)
- echo pdp10-unknown-tops20
- exit 0 ;;
- *:ITS:*:*)
- echo pdp10-unknown-its
- exit 0 ;;
- i*86:XTS-300:*:STOP)
- echo ${UNAME_MACHINE}-unknown-stop
- exit 0 ;;
- i*86:atheos:*:*)
- echo ${UNAME_MACHINE}-unknown-atheos
- exit 0 ;;
-esac
-
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
-eval $set_cc_for_build
-cat >$dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
- /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
- I don't know.... */
- printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
- printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
- "4"
-#else
- ""
-#endif
- ); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
- printf ("arm-acorn-riscix"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
- printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
- int version;
- version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
- if (version < 4)
- printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
- else
- printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
- exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
- printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
- printf ("ns32k-encore-mach\n"); exit (0);
-#else
- printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
- printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
- printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
- printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
- struct utsname un;
-
- uname(&un);
-
- if (strncmp(un.version, "V2", 2) == 0) {
- printf ("i386-sequent-ptx2\n"); exit (0);
- }
- if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
- printf ("i386-sequent-ptx1\n"); exit (0);
- }
- printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-# if !defined (ultrix)
-# include <sys/param.h>
-# if defined (BSD)
-# if BSD == 43
- printf ("vax-dec-bsd4.3\n"); exit (0);
-# else
-# if BSD == 199006
- printf ("vax-dec-bsd4.3reno\n"); exit (0);
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# endif
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# else
- printf ("vax-dec-ultrix\n"); exit (0);
-# endif
-#endif
-
-#if defined (alliant) && defined (i860)
- printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
- exit (1);
-}
-EOF
-
-$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && $dummy && rm -f $dummy.c $dummy && rmdir $tmpdir && exit 0
-rm -f $dummy.c $dummy && rmdir $tmpdir
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
- case `getsysinfo -f cpu_type` in
- c1*)
- echo c1-convex-bsd
- exit 0 ;;
- c2*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit 0 ;;
- c34*)
- echo c34-convex-bsd
- exit 0 ;;
- c38*)
- echo c38-convex-bsd
- exit 0 ;;
- c4*)
- echo c4-convex-bsd
- exit 0 ;;
- esac
-fi
-
-cat >&2 <<EOF
-$0: unable to guess system type
-
-This script, last modified $timestamp, has failed to recognize
-the operating system you are using. It is advised that you
-download the most up to date version of the config scripts from
-
- ftp://ftp.gnu.org/pub/gnu/config/
-
-If the version you run ($0) is already up to date, please
-send the following data and any information you think might be
-pertinent to <config-patches@gnu.org> in order to provide the needed
-information to handle your system.
-
-config.guess timestamp = $timestamp
-
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
-
-hostinfo = `(hostinfo) 2>/dev/null`
-/bin/universe = `(/bin/universe) 2>/dev/null`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
-/bin/arch = `(/bin/arch) 2>/dev/null`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
-
-UNAME_MACHINE = ${UNAME_MACHINE}
-UNAME_RELEASE = ${UNAME_RELEASE}
-UNAME_SYSTEM = ${UNAME_SYSTEM}
-UNAME_VERSION = ${UNAME_VERSION}
-EOF
-
-exit 1
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
+++ /dev/null
-#! /bin/sh
-# Configuration validation subroutine script.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002 Free Software Foundation, Inc.
-
-timestamp='2002-09-05'
-
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine. It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor,
-# Boston, MA 02110-1301, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Please send patches to <config-patches@gnu.org>. Submit a context
-# diff and a properly formatted ChangeLog entry.
-#
-# Configuration subroutine to validate and canonicalize a configuration type.
-# Supply the specified configuration type as an argument.
-# If it is invalid, we print an error message on stderr and exit with code 1.
-# Otherwise, we print the canonical config type on stdout and succeed.
-
-# This file is supposed to be the same for all GNU packages
-# and recognize all the CPU types, system types and aliases
-# that are meaningful with *any* GNU software.
-# Each package is responsible for reporting which valid configurations
-# it does not support. The user should be able to distinguish
-# a failure to support a valid configuration from a meaningless
-# configuration.
-
-# The goal of this file is to map all the various variations of a given
-# machine specification into a single specification in the form:
-# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or in some cases, the newer four-part form:
-# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# It is wrong to echo any other type of specification.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION] CPU-MFR-OPSYS
- $0 [OPTION] ALIAS
-
-Canonicalize a configuration name.
-
-Operation modes:
- -h, --help print this help, then exit
- -t, --time-stamp print date of last modification, then exit
- -v, --version print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.sub ($timestamp)
-
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
- case $1 in
- --time-stamp | --time* | -t )
- echo "$timestamp" ; exit 0 ;;
- --version | -v )
- echo "$version" ; exit 0 ;;
- --help | --h* | -h )
- echo "$usage"; exit 0 ;;
- -- ) # Stop option processing
- shift; break ;;
- - ) # Use stdin as input.
- break ;;
- -* )
- echo "$me: invalid option $1$help"
- exit 1 ;;
-
- *local*)
- # First pass through any local machine types.
- echo $1
- exit 0;;
-
- * )
- break ;;
- esac
-done
-
-case $# in
- 0) echo "$me: missing argument$help" >&2
- exit 1;;
- 1) ;;
- *) echo "$me: too many arguments$help" >&2
- exit 1;;
-esac
-
-# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
-# Here we must recognize all the valid KERNEL-OS combinations.
-maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
-case $maybe_os in
- nto-qnx* | linux-gnu* | freebsd*-gnu* | storm-chaos* | os2-emx* | windows32-* | rtmk-nova*)
- os=-$maybe_os
- basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
- ;;
- *)
- basic_machine=`echo $1 | sed 's/-[^-]*$//'`
- if [ $basic_machine != $1 ]
- then os=`echo $1 | sed 's/.*-/-/'`
- else os=; fi
- ;;
-esac
-
-### Let's recognize common machines as not being operating systems so
-### that things like config.sub decstation-3100 work. We also
-### recognize some manufacturers as not being operating systems, so we
-### can provide default operating systems below.
-case $os in
- -sun*os*)
- # Prevent following clause from handling this invalid input.
- ;;
- -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
- -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
- -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
- -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
- -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
- -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
- -apple | -axis)
- os=
- basic_machine=$1
- ;;
- -sim | -cisco | -oki | -wec | -winbond)
- os=
- basic_machine=$1
- ;;
- -scout)
- ;;
- -wrs)
- os=-vxworks
- basic_machine=$1
- ;;
- -chorusos*)
- os=-chorusos
- basic_machine=$1
- ;;
- -chorusrdb)
- os=-chorusrdb
- basic_machine=$1
- ;;
- -hiux*)
- os=-hiuxwe2
- ;;
- -sco5)
- os=-sco3.2v5
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco4)
- os=-sco3.2v4
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco3.2.[4-9]*)
- os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco3.2v[4-9]*)
- # Don't forget version if it is 3.2v4 or newer.
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco*)
- os=-sco3.2v2
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -udk*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -isc)
- os=-isc2.2
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -clix*)
- basic_machine=clipper-intergraph
- ;;
- -isc*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -lynx*)
- os=-lynxos
- ;;
- -ptx*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
- ;;
- -windowsnt*)
- os=`echo $os | sed -e 's/windowsnt/winnt/'`
- ;;
- -psos*)
- os=-psos
- ;;
- -mint | -mint[0-9]*)
- basic_machine=m68k-atari
- os=-mint
- ;;
-esac
-
-# Decode aliases for certain CPU-COMPANY combinations.
-case $basic_machine in
- # Recognize the basic CPU types without company name.
- # Some are omitted here because they have special meanings below.
- 1750a | 580 \
- | a29k \
- | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
- | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
- | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
- | clipper \
- | d10v | d30v | dlx | dsp16xx \
- | fr30 | frv \
- | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
- | i370 | i860 | i960 | ia64 \
- | ip2k \
- | m32r | m68000 | m68k | m88k | mcore \
- | mips | mipsbe | mipseb | mipsel | mipsle \
- | mips16 \
- | mips64 | mips64el \
- | mips64vr | mips64vrel \
- | mips64orion | mips64orionel \
- | mips64vr4100 | mips64vr4100el \
- | mips64vr4300 | mips64vr4300el \
- | mips64vr5000 | mips64vr5000el \
- | mipsisa32 | mipsisa32el \
- | mipsisa64 | mipsisa64el \
- | mipsisa64sb1 | mipsisa64sb1el \
- | mipsisa64sr71k | mipsisa64sr71kel \
- | mipstx39 | mipstx39el \
- | mn10200 | mn10300 \
- | ns16k | ns32k \
- | openrisc | or32 \
- | pdp10 | pdp11 | pj | pjl \
- | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
- | pyramid \
- | sh | sh[1234] | sh3e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
- | sh64 | sh64le \
- | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \
- | strongarm \
- | tahoe | thumb | tic80 | tron \
- | v850 | v850e \
- | we32k \
- | x86 | xscale | xstormy16 | xtensa \
- | z8k)
- basic_machine=$basic_machine-unknown
- ;;
- m6811 | m68hc11 | m6812 | m68hc12)
- # Motorola 68HC11/12.
- basic_machine=$basic_machine-unknown
- os=-none
- ;;
- m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
- ;;
-
- # We use `pc' rather than `unknown'
- # because (1) that's what they normally are, and
- # (2) the word "unknown" tends to confuse beginning users.
- i*86 | x86_64)
- basic_machine=$basic_machine-pc
- ;;
- # Object if more than one company name word.
- *-*-*)
- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
- exit 1
- ;;
- # Recognize the basic CPU types with company name.
- 580-* \
- | a29k-* \
- | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
- | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
- | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
- | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
- | avr-* \
- | bs2000-* \
- | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* \
- | clipper-* | cydra-* \
- | d10v-* | d30v-* | dlx-* \
- | elxsi-* \
- | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
- | h8300-* | h8500-* \
- | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
- | i*86-* | i860-* | i960-* | ia64-* \
- | ip2k-* \
- | m32r-* \
- | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
- | m88110-* | m88k-* | mcore-* \
- | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
- | mips16-* \
- | mips64-* | mips64el-* \
- | mips64vr-* | mips64vrel-* \
- | mips64orion-* | mips64orionel-* \
- | mips64vr4100-* | mips64vr4100el-* \
- | mips64vr4300-* | mips64vr4300el-* \
- | mips64vr5000-* | mips64vr5000el-* \
- | mipsisa32-* | mipsisa32el-* \
- | mipsisa64-* | mipsisa64el-* \
- | mipsisa64sb1-* | mipsisa64sb1el-* \
- | mipsisa64sr71k-* | mipsisa64sr71kel-* \
- | mipstx39 | mipstx39el \
- | none-* | np1-* | ns16k-* | ns32k-* \
- | orion-* \
- | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
- | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
- | pyramid-* \
- | romp-* | rs6000-* \
- | sh-* | sh[1234]-* | sh3e-* | sh[34]eb-* | shbe-* \
- | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
- | sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
- | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
- | tahoe-* | thumb-* | tic30-* | tic4x-* | tic54x-* | tic80-* | tron-* \
- | v850-* | v850e-* | vax-* \
- | we32k-* \
- | x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \
- | xtensa-* \
- | ymp-* \
- | z8k-*)
- ;;
- # Recognize the various machine names and aliases which stand
- # for a CPU type and a company and sometimes even an OS.
- 386bsd)
- basic_machine=i386-unknown
- os=-bsd
- ;;
- 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
- basic_machine=m68000-att
- ;;
- 3b*)
- basic_machine=we32k-att
- ;;
- a29khif)
- basic_machine=a29k-amd
- os=-udi
- ;;
- adobe68k)
- basic_machine=m68010-adobe
- os=-scout
- ;;
- alliant | fx80)
- basic_machine=fx80-alliant
- ;;
- altos | altos3068)
- basic_machine=m68k-altos
- ;;
- am29k)
- basic_machine=a29k-none
- os=-bsd
- ;;
- amdahl)
- basic_machine=580-amdahl
- os=-sysv
- ;;
- amiga | amiga-*)
- basic_machine=m68k-unknown
- ;;
- amigaos | amigados)
- basic_machine=m68k-unknown
- os=-amigaos
- ;;
- amigaunix | amix)
- basic_machine=m68k-unknown
- os=-sysv4
- ;;
- apollo68)
- basic_machine=m68k-apollo
- os=-sysv
- ;;
- apollo68bsd)
- basic_machine=m68k-apollo
- os=-bsd
- ;;
- aux)
- basic_machine=m68k-apple
- os=-aux
- ;;
- balance)
- basic_machine=ns32k-sequent
- os=-dynix
- ;;
- c90)
- basic_machine=c90-cray
- os=-unicos
- ;;
- convex-c1)
- basic_machine=c1-convex
- os=-bsd
- ;;
- convex-c2)
- basic_machine=c2-convex
- os=-bsd
- ;;
- convex-c32)
- basic_machine=c32-convex
- os=-bsd
- ;;
- convex-c34)
- basic_machine=c34-convex
- os=-bsd
- ;;
- convex-c38)
- basic_machine=c38-convex
- os=-bsd
- ;;
- cray | j90)
- basic_machine=j90-cray
- os=-unicos
- ;;
- crds | unos)
- basic_machine=m68k-crds
- ;;
- cris | cris-* | etrax*)
- basic_machine=cris-axis
- ;;
- da30 | da30-*)
- basic_machine=m68k-da30
- ;;
- decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
- basic_machine=mips-dec
- ;;
- decsystem10* | dec10*)
- basic_machine=pdp10-dec
- os=-tops10
- ;;
- decsystem20* | dec20*)
- basic_machine=pdp10-dec
- os=-tops20
- ;;
- delta | 3300 | motorola-3300 | motorola-delta \
- | 3300-motorola | delta-motorola)
- basic_machine=m68k-motorola
- ;;
- delta88)
- basic_machine=m88k-motorola
- os=-sysv3
- ;;
- dpx20 | dpx20-*)
- basic_machine=rs6000-bull
- os=-bosx
- ;;
- dpx2* | dpx2*-bull)
- basic_machine=m68k-bull
- os=-sysv3
- ;;
- ebmon29k)
- basic_machine=a29k-amd
- os=-ebmon
- ;;
- elxsi)
- basic_machine=elxsi-elxsi
- os=-bsd
- ;;
- encore | umax | mmax)
- basic_machine=ns32k-encore
- ;;
- es1800 | OSE68k | ose68k | ose | OSE)
- basic_machine=m68k-ericsson
- os=-ose
- ;;
- fx2800)
- basic_machine=i860-alliant
- ;;
- genix)
- basic_machine=ns32k-ns
- ;;
- gmicro)
- basic_machine=tron-gmicro
- os=-sysv
- ;;
- go32)
- basic_machine=i386-pc
- os=-go32
- ;;
- h3050r* | hiux*)
- basic_machine=hppa1.1-hitachi
- os=-hiuxwe2
- ;;
- h8300hms)
- basic_machine=h8300-hitachi
- os=-hms
- ;;
- h8300xray)
- basic_machine=h8300-hitachi
- os=-xray
- ;;
- h8500hms)
- basic_machine=h8500-hitachi
- os=-hms
- ;;
- harris)
- basic_machine=m88k-harris
- os=-sysv3
- ;;
- hp300-*)
- basic_machine=m68k-hp
- ;;
- hp300bsd)
- basic_machine=m68k-hp
- os=-bsd
- ;;
- hp300hpux)
- basic_machine=m68k-hp
- os=-hpux
- ;;
- hp3k9[0-9][0-9] | hp9[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hp9k2[0-9][0-9] | hp9k31[0-9])
- basic_machine=m68000-hp
- ;;
- hp9k3[2-9][0-9])
- basic_machine=m68k-hp
- ;;
- hp9k6[0-9][0-9] | hp6[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hp9k7[0-79][0-9] | hp7[0-79][0-9])
- basic_machine=hppa1.1-hp
- ;;
- hp9k78[0-9] | hp78[0-9])
- # FIXME: really hppa2.0-hp
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
- # FIXME: really hppa2.0-hp
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[0-9][13679] | hp8[0-9][13679])
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[0-9][0-9] | hp8[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hppa-next)
- os=-nextstep3
- ;;
- hppaosf)
- basic_machine=hppa1.1-hp
- os=-osf
- ;;
- hppro)
- basic_machine=hppa1.1-hp
- os=-proelf
- ;;
- i370-ibm* | ibm*)
- basic_machine=i370-ibm
- ;;
-# I'm not sure what "Sysv32" means. Should this be sysv3.2?
- i*86v32)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv32
- ;;
- i*86v4*)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv4
- ;;
- i*86v)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv
- ;;
- i*86sol2)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-solaris2
- ;;
- i386mach)
- basic_machine=i386-mach
- os=-mach
- ;;
- i386-vsta | vsta)
- basic_machine=i386-unknown
- os=-vsta
- ;;
- iris | iris4d)
- basic_machine=mips-sgi
- case $os in
- -irix*)
- ;;
- *)
- os=-irix4
- ;;
- esac
- ;;
- isi68 | isi)
- basic_machine=m68k-isi
- os=-sysv
- ;;
- m88k-omron*)
- basic_machine=m88k-omron
- ;;
- magnum | m3230)
- basic_machine=mips-mips
- os=-sysv
- ;;
- merlin)
- basic_machine=ns32k-utek
- os=-sysv
- ;;
- mingw32)
- basic_machine=i386-pc
- os=-mingw32
- ;;
- miniframe)
- basic_machine=m68000-convergent
- ;;
- *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
- basic_machine=m68k-atari
- os=-mint
- ;;
- mips3*-*)
- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
- ;;
- mips3*)
- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
- ;;
- mmix*)
- basic_machine=mmix-knuth
- os=-mmixware
- ;;
- monitor)
- basic_machine=m68k-rom68k
- os=-coff
- ;;
- morphos)
- basic_machine=powerpc-unknown
- os=-morphos
- ;;
- msdos)
- basic_machine=i386-pc
- os=-msdos
- ;;
- mvs)
- basic_machine=i370-ibm
- os=-mvs
- ;;
- ncr3000)
- basic_machine=i486-ncr
- os=-sysv4
- ;;
- netbsd386)
- basic_machine=i386-unknown
- os=-netbsd
- ;;
- netwinder)
- basic_machine=armv4l-rebel
- os=-linux
- ;;
- news | news700 | news800 | news900)
- basic_machine=m68k-sony
- os=-newsos
- ;;
- news1000)
- basic_machine=m68030-sony
- os=-newsos
- ;;
- news-3600 | risc-news)
- basic_machine=mips-sony
- os=-newsos
- ;;
- necv70)
- basic_machine=v70-nec
- os=-sysv
- ;;
- next | m*-next )
- basic_machine=m68k-next
- case $os in
- -nextstep* )
- ;;
- -ns2*)
- os=-nextstep2
- ;;
- *)
- os=-nextstep3
- ;;
- esac
- ;;
- nh3000)
- basic_machine=m68k-harris
- os=-cxux
- ;;
- nh[45]000)
- basic_machine=m88k-harris
- os=-cxux
- ;;
- nindy960)
- basic_machine=i960-intel
- os=-nindy
- ;;
- mon960)
- basic_machine=i960-intel
- os=-mon960
- ;;
- nonstopux)
- basic_machine=mips-compaq
- os=-nonstopux
- ;;
- np1)
- basic_machine=np1-gould
- ;;
- nsr-tandem)
- basic_machine=nsr-tandem
- ;;
- op50n-* | op60c-*)
- basic_machine=hppa1.1-oki
- os=-proelf
- ;;
- or32 | or32-*)
- basic_machine=or32-unknown
- os=-coff
- ;;
- OSE68000 | ose68000)
- basic_machine=m68000-ericsson
- os=-ose
- ;;
- os68k)
- basic_machine=m68k-none
- os=-os68k
- ;;
- pa-hitachi)
- basic_machine=hppa1.1-hitachi
- os=-hiuxwe2
- ;;
- paragon)
- basic_machine=i860-intel
- os=-osf
- ;;
- pbd)
- basic_machine=sparc-tti
- ;;
- pbb)
- basic_machine=m68k-tti
- ;;
- pc532 | pc532-*)
- basic_machine=ns32k-pc532
- ;;
- pentium | p5 | k5 | k6 | nexgen | viac3)
- basic_machine=i586-pc
- ;;
- pentiumpro | p6 | 6x86 | athlon | athlon_*)
- basic_machine=i686-pc
- ;;
- pentiumii | pentium2)
- basic_machine=i686-pc
- ;;
- pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
- basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentiumpro-* | p6-* | 6x86-* | athlon-*)
- basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentiumii-* | pentium2-*)
- basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pn)
- basic_machine=pn-gould
- ;;
- power) basic_machine=power-ibm
- ;;
- ppc) basic_machine=powerpc-unknown
- ;;
- ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppcle | powerpclittle | ppc-le | powerpc-little)
- basic_machine=powerpcle-unknown
- ;;
- ppcle-* | powerpclittle-*)
- basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppc64) basic_machine=powerpc64-unknown
- ;;
- ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppc64le | powerpc64little | ppc64-le | powerpc64-little)
- basic_machine=powerpc64le-unknown
- ;;
- ppc64le-* | powerpc64little-*)
- basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ps2)
- basic_machine=i386-ibm
- ;;
- pw32)
- basic_machine=i586-unknown
- os=-pw32
- ;;
- rom68k)
- basic_machine=m68k-rom68k
- os=-coff
- ;;
- rm[46]00)
- basic_machine=mips-siemens
- ;;
- rtpc | rtpc-*)
- basic_machine=romp-ibm
- ;;
- s390 | s390-*)
- basic_machine=s390-ibm
- ;;
- s390x | s390x-*)
- basic_machine=s390x-ibm
- ;;
- sa29200)
- basic_machine=a29k-amd
- os=-udi
- ;;
- sb1)
- basic_machine=mipsisa64sb1-unknown
- ;;
- sb1el)
- basic_machine=mipsisa64sb1el-unknown
- ;;
- sequent)
- basic_machine=i386-sequent
- ;;
- sh)
- basic_machine=sh-hitachi
- os=-hms
- ;;
- sparclite-wrs | simso-wrs)
- basic_machine=sparclite-wrs
- os=-vxworks
- ;;
- sps7)
- basic_machine=m68k-bull
- os=-sysv2
- ;;
- spur)
- basic_machine=spur-unknown
- ;;
- st2000)
- basic_machine=m68k-tandem
- ;;
- stratus)
- basic_machine=i860-stratus
- os=-sysv4
- ;;
- sun2)
- basic_machine=m68000-sun
- ;;
- sun2os3)
- basic_machine=m68000-sun
- os=-sunos3
- ;;
- sun2os4)
- basic_machine=m68000-sun
- os=-sunos4
- ;;
- sun3os3)
- basic_machine=m68k-sun
- os=-sunos3
- ;;
- sun3os4)
- basic_machine=m68k-sun
- os=-sunos4
- ;;
- sun4os3)
- basic_machine=sparc-sun
- os=-sunos3
- ;;
- sun4os4)
- basic_machine=sparc-sun
- os=-sunos4
- ;;
- sun4sol2)
- basic_machine=sparc-sun
- os=-solaris2
- ;;
- sun3 | sun3-*)
- basic_machine=m68k-sun
- ;;
- sun4)
- basic_machine=sparc-sun
- ;;
- sun386 | sun386i | roadrunner)
- basic_machine=i386-sun
- ;;
- sv1)
- basic_machine=sv1-cray
- os=-unicos
- ;;
- symmetry)
- basic_machine=i386-sequent
- os=-dynix
- ;;
- t3d)
- basic_machine=alpha-cray
- os=-unicos
- ;;
- t3e)
- basic_machine=alphaev5-cray
- os=-unicos
- ;;
- t90)
- basic_machine=t90-cray
- os=-unicos
- ;;
- tic4x | c4x*)
- basic_machine=tic4x-unknown
- os=-coff
- ;;
- tic54x | c54x*)
- basic_machine=tic54x-unknown
- os=-coff
- ;;
- tx39)
- basic_machine=mipstx39-unknown
- ;;
- tx39el)
- basic_machine=mipstx39el-unknown
- ;;
- toad1)
- basic_machine=pdp10-xkl
- os=-tops20
- ;;
- tower | tower-32)
- basic_machine=m68k-ncr
- ;;
- udi29k)
- basic_machine=a29k-amd
- os=-udi
- ;;
- ultra3)
- basic_machine=a29k-nyu
- os=-sym1
- ;;
- v810 | necv810)
- basic_machine=v810-nec
- os=-none
- ;;
- vaxv)
- basic_machine=vax-dec
- os=-sysv
- ;;
- vms)
- basic_machine=vax-dec
- os=-vms
- ;;
- vpp*|vx|vx-*)
- basic_machine=f301-fujitsu
- ;;
- vxworks960)
- basic_machine=i960-wrs
- os=-vxworks
- ;;
- vxworks68)
- basic_machine=m68k-wrs
- os=-vxworks
- ;;
- vxworks29k)
- basic_machine=a29k-wrs
- os=-vxworks
- ;;
- w65*)
- basic_machine=w65-wdc
- os=-none
- ;;
- w89k-*)
- basic_machine=hppa1.1-winbond
- os=-proelf
- ;;
- windows32)
- basic_machine=i386-pc
- os=-windows32-msvcrt
- ;;
- xps | xps100)
- basic_machine=xps100-honeywell
- ;;
- ymp)
- basic_machine=ymp-cray
- os=-unicos
- ;;
- z8k-*-coff)
- basic_machine=z8k-unknown
- os=-sim
- ;;
- none)
- basic_machine=none-none
- os=-none
- ;;
-
-# Here we handle the default manufacturer of certain CPU types. It is in
-# some cases the only manufacturer, in others, it is the most popular.
- w89k)
- basic_machine=hppa1.1-winbond
- ;;
- op50n)
- basic_machine=hppa1.1-oki
- ;;
- op60c)
- basic_machine=hppa1.1-oki
- ;;
- romp)
- basic_machine=romp-ibm
- ;;
- rs6000)
- basic_machine=rs6000-ibm
- ;;
- vax)
- basic_machine=vax-dec
- ;;
- pdp10)
- # there are many clones, so DEC is not a safe bet
- basic_machine=pdp10-unknown
- ;;
- pdp11)
- basic_machine=pdp11-dec
- ;;
- we32k)
- basic_machine=we32k-att
- ;;
- sh3 | sh4 | sh3eb | sh4eb | sh[1234]le | sh3ele)
- basic_machine=sh-unknown
- ;;
- sh64)
- basic_machine=sh64-unknown
- ;;
- sparc | sparcv9 | sparcv9b)
- basic_machine=sparc-sun
- ;;
- cydra)
- basic_machine=cydra-cydrome
- ;;
- orion)
- basic_machine=orion-highlevel
- ;;
- orion105)
- basic_machine=clipper-highlevel
- ;;
- mac | mpw | mac-mpw)
- basic_machine=m68k-apple
- ;;
- pmac | pmac-mpw)
- basic_machine=powerpc-apple
- ;;
- *-unknown)
- # Make sure to match an already-canonicalized machine name.
- ;;
- *)
- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
- exit 1
- ;;
-esac
-
-# Here we canonicalize certain aliases for manufacturers.
-case $basic_machine in
- *-digital*)
- basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
- ;;
- *-commodore*)
- basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
- ;;
- *)
- ;;
-esac
-
-# Decode manufacturer-specific aliases for certain operating systems.
-
-if [ x"$os" != x"" ]
-then
-case $os in
- # First match some system type aliases
- # that might get confused with valid system types.
- # -solaris* is a basic system type, with this one exception.
- -solaris1 | -solaris1.*)
- os=`echo $os | sed -e 's|solaris1|sunos4|'`
- ;;
- -solaris)
- os=-solaris2
- ;;
- -svr4*)
- os=-sysv4
- ;;
- -unixware*)
- os=-sysv4.2uw
- ;;
- -gnu/linux*)
- os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
- ;;
- # First accept the basic system types.
- # The portable systems comes first.
- # Each alternative MUST END IN A *, to match a version number.
- # -sysv* is not here because it comes later, after sysvr4.
- -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
- | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
- | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
- | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
- | -aos* \
- | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
- | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
- | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
- | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
- | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
- | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
- | -chorusos* | -chorusrdb* \
- | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
- | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
- | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \
- | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
- | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
- | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
- | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* | -powermax*)
- # Remember, each alternative MUST END IN *, to match a version number.
- ;;
- -qnx*)
- case $basic_machine in
- x86-* | i*86-*)
- ;;
- *)
- os=-nto$os
- ;;
- esac
- ;;
- -nto*)
- os=-nto-qnx
- ;;
- -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
- | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
- | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
- ;;
- -mac*)
- os=`echo $os | sed -e 's|mac|macos|'`
- ;;
- -linux*)
- os=`echo $os | sed -e 's|linux|linux-gnu|'`
- ;;
- -sunos5*)
- os=`echo $os | sed -e 's|sunos5|solaris2|'`
- ;;
- -sunos6*)
- os=`echo $os | sed -e 's|sunos6|solaris3|'`
- ;;
- -opened*)
- os=-openedition
- ;;
- -wince*)
- os=-wince
- ;;
- -osfrose*)
- os=-osfrose
- ;;
- -osf*)
- os=-osf
- ;;
- -utek*)
- os=-bsd
- ;;
- -dynix*)
- os=-bsd
- ;;
- -acis*)
- os=-aos
- ;;
- -atheos*)
- os=-atheos
- ;;
- -386bsd)
- os=-bsd
- ;;
- -ctix* | -uts*)
- os=-sysv
- ;;
- -nova*)
- os=-rtmk-nova
- ;;
- -ns2 )
- os=-nextstep2
- ;;
- -nsk*)
- os=-nsk
- ;;
- # Preserve the version number of sinix5.
- -sinix5.*)
- os=`echo $os | sed -e 's|sinix|sysv|'`
- ;;
- -sinix*)
- os=-sysv4
- ;;
- -triton*)
- os=-sysv3
- ;;
- -oss*)
- os=-sysv3
- ;;
- -svr4)
- os=-sysv4
- ;;
- -svr3)
- os=-sysv3
- ;;
- -sysvr4)
- os=-sysv4
- ;;
- # This must come after -sysvr4.
- -sysv*)
- ;;
- -ose*)
- os=-ose
- ;;
- -es1800*)
- os=-ose
- ;;
- -xenix)
- os=-xenix
- ;;
- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
- os=-mint
- ;;
- -none)
- ;;
- *)
- # Get rid of the `-' at the beginning of $os.
- os=`echo $os | sed 's/[^-]*-//'`
- echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
- exit 1
- ;;
-esac
-else
-
-# Here we handle the default operating systems that come with various machines.
-# The value should be what the vendor currently ships out the door with their
-# machine or put another way, the most popular os provided with the machine.
-
-# Note that if you're going to try to match "-MANUFACTURER" here (say,
-# "-sun"), then you have to tell the case statement up towards the top
-# that MANUFACTURER isn't an operating system. Otherwise, code above
-# will signal an error saying that MANUFACTURER isn't an operating
-# system, and we'll never get to this point.
-
-case $basic_machine in
- *-acorn)
- os=-riscix1.2
- ;;
- arm*-rebel)
- os=-linux
- ;;
- arm*-semi)
- os=-aout
- ;;
- # This must come before the *-dec entry.
- pdp10-*)
- os=-tops20
- ;;
- pdp11-*)
- os=-none
- ;;
- *-dec | vax-*)
- os=-ultrix4.2
- ;;
- m68*-apollo)
- os=-domain
- ;;
- i386-sun)
- os=-sunos4.0.2
- ;;
- m68000-sun)
- os=-sunos3
- # This also exists in the configure program, but was not the
- # default.
- # os=-sunos4
- ;;
- m68*-cisco)
- os=-aout
- ;;
- mips*-cisco)
- os=-elf
- ;;
- mips*-*)
- os=-elf
- ;;
- or32-*)
- os=-coff
- ;;
- *-tti) # must be before sparc entry or we get the wrong os.
- os=-sysv3
- ;;
- sparc-* | *-sun)
- os=-sunos4.1.1
- ;;
- *-be)
- os=-beos
- ;;
- *-ibm)
- os=-aix
- ;;
- *-wec)
- os=-proelf
- ;;
- *-winbond)
- os=-proelf
- ;;
- *-oki)
- os=-proelf
- ;;
- *-hp)
- os=-hpux
- ;;
- *-hitachi)
- os=-hiux
- ;;
- i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
- os=-sysv
- ;;
- *-cbm)
- os=-amigaos
- ;;
- *-dg)
- os=-dgux
- ;;
- *-dolphin)
- os=-sysv3
- ;;
- m68k-ccur)
- os=-rtu
- ;;
- m88k-omron*)
- os=-luna
- ;;
- *-next )
- os=-nextstep
- ;;
- *-sequent)
- os=-ptx
- ;;
- *-crds)
- os=-unos
- ;;
- *-ns)
- os=-genix
- ;;
- i370-*)
- os=-mvs
- ;;
- *-next)
- os=-nextstep3
- ;;
- *-gould)
- os=-sysv
- ;;
- *-highlevel)
- os=-bsd
- ;;
- *-encore)
- os=-bsd
- ;;
- *-sgi)
- os=-irix
- ;;
- *-siemens)
- os=-sysv4
- ;;
- *-masscomp)
- os=-rtu
- ;;
- f30[01]-fujitsu | f700-fujitsu)
- os=-uxpv
- ;;
- *-rom68k)
- os=-coff
- ;;
- *-*bug)
- os=-coff
- ;;
- *-apple)
- os=-macos
- ;;
- *-atari*)
- os=-mint
- ;;
- *)
- os=-none
- ;;
-esac
-fi
-
-# Here we handle the case where we know the os, and the CPU type, but not the
-# manufacturer. We pick the logical manufacturer.
-vendor=unknown
-case $basic_machine in
- *-unknown)
- case $os in
- -riscix*)
- vendor=acorn
- ;;
- -sunos*)
- vendor=sun
- ;;
- -aix*)
- vendor=ibm
- ;;
- -beos*)
- vendor=be
- ;;
- -hpux*)
- vendor=hp
- ;;
- -mpeix*)
- vendor=hp
- ;;
- -hiux*)
- vendor=hitachi
- ;;
- -unos*)
- vendor=crds
- ;;
- -dgux*)
- vendor=dg
- ;;
- -luna*)
- vendor=omron
- ;;
- -genix*)
- vendor=ns
- ;;
- -mvs* | -opened*)
- vendor=ibm
- ;;
- -ptx*)
- vendor=sequent
- ;;
- -vxsim* | -vxworks* | -windiss*)
- vendor=wrs
- ;;
- -aux*)
- vendor=apple
- ;;
- -hms*)
- vendor=hitachi
- ;;
- -mpw* | -macos*)
- vendor=apple
- ;;
- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
- vendor=atari
- ;;
- -vos*)
- vendor=stratus
- ;;
- esac
- basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
- ;;
-esac
-
-echo $basic_machine$os
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
+++ /dev/null
-#! /bin/sh
-
-# depcomp - compile a program generating dependencies as side-effects
-# Copyright 1999, 2000 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
- echo "depcomp: Variables source, object and depmode must be set" 1>&2
- exit 1
-fi
-# `libtool' can also be set to `yes' or `no'.
-
-if test -z "$depfile"; then
- base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'`
- dir=`echo "$object" | sed 's,/.*$,/,'`
- if test "$dir" = "$object"; then
- dir=
- fi
- # FIXME: should be _deps on DOS.
- depfile="$dir.deps/$base"
-fi
-
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Some modes work just like other modes, but use different flags. We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write. Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
- # HP compiler uses -M and no extra arg.
- gccflag=-M
- depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
- # This is just like dashmstdout with a different argument.
- dashmflag=-xM
- depmode=dashmstdout
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want. Yay! Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff. Hmm.
- "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- mv "$tmpdepfile" "$depfile"
- ;;
-
-gcc)
-## There are various ways to get dependency output from gcc. Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-## up in a subdir. Having to rename by hand is ugly.
-## (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-## -MM, not -M (despite what the docs say).
-## - Using -M directly means running the compiler twice (even worse
-## than renaming).
- if test -z "$gccflag"; then
- gccflag=-MD,
- fi
- "$@" -Wp,"$gccflag$tmpdepfile"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
- sed -e 's/^[^:]*: / /' \
- -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header). We avoid this by adding
-## dummy dependencies for each header file. Too bad gcc doesn't do
-## this for us directly.
- tr ' ' '
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'. On the theory
-## that the space means something, we add a space to the output as
-## well.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-hp)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
-sgi)
- if test "$libtool" = yes; then
- "$@" "-Wp,-MDupdate,$tmpdepfile"
- else
- "$@" -MDupdate "$tmpdepfile"
- fi
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
-
- if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
- echo "$object : \\" > "$depfile"
-
- # Clip off the initial element (the dependent). Don't try to be
- # clever and replace this with sed code, as IRIX sed won't handle
- # lines with more than a fixed number of characters (4096 in
- # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
- # the IRIX cc adds comments like `#:fec' to the end of the
- # dependency line.
- tr ' ' '
-' < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
- tr '
-' ' ' >> $depfile
- echo >> $depfile
-
- # The second pass generates a dummy entry for each header file.
- tr ' ' '
-' < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
- >> $depfile
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-aix)
- # The C for AIX Compiler uses -M and outputs the dependencies
- # in a .u file. This file always lives in the current directory.
- # Also, the AIX compiler puts `$object:' at the start of each line;
- # $object doesn't have directory information.
- stripped=`echo "$object" | sed -e 's,^.*/,,' -e 's/\(.*\)\..*$/\1/'`
- tmpdepfile="$stripped.u"
- outname="$stripped.o"
- if test "$libtool" = yes; then
- "$@" -Wc,-M
- else
- "$@" -M
- fi
-
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
-
- if test -f "$tmpdepfile"; then
- # Each line is of the form `foo.o: dependent.h'.
- # Do two passes, one to just change these to
- # `$object: dependent.h' and one to simply `dependent.h:'.
- sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
- sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-tru64)
- # The Tru64 compiler uses -MD to generate dependencies as a side
- # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
- # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
- # dependencies in `foo.d' instead, so we check for that too.
- # Subdirectories are respected.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
- if test "$libtool" = yes; then
- tmpdepfile1="$dir.libs/$base.lo.d"
- tmpdepfile2="$dir.libs/$base.d"
- "$@" -Wc,-MD
- else
- tmpdepfile1="$dir$base.o.d"
- tmpdepfile2="$dir$base.d"
- "$@" -MD
- fi
-
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile1" "$tmpdepfile2"
- exit $stat
- fi
-
- if test -f "$tmpdepfile1"; then
- tmpdepfile="$tmpdepfile1"
- else
- tmpdepfile="$tmpdepfile2"
- fi
- if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- # That's a space and a tab in the [].
- sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
- else
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-#nosideeffect)
- # This comment above is used by automake to tell side-effect
- # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
- # Important note: in order to support this mode, a compiler *must*
- # always write the proprocessed file to stdout, regardless of -o.
- "$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test $1 != '--mode=compile'; do
- shift
- done
- shift
- fi
-
- # Remove `-o $object'. We will use -o /dev/null later,
- # however we can't do the remplacement now because
- # `-o $object' might simply not be used
- IFS=" "
- for arg
- do
- case $arg in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift # fnord
- shift # $arg
- ;;
- esac
- done
-
- test -z "$dashmflag" && dashmflag=-M
- "$@" -o /dev/null $dashmflag | sed 's:^[^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
- rm -f "$depfile"
- cat < "$tmpdepfile" > "$depfile"
- tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-dashXmstdout)
- # This case only exists to satisfy depend.m4. It is never actually
- # run, as this mode is specially recognized in the preamble.
- exit 1
- ;;
-
-makedepend)
- "$@" || exit $?
- # X makedepend
- shift
- cleared=no
- for arg in "$@"; do
- case $cleared in
- no)
- set ""; shift
- cleared=yes ;;
- esac
- case "$arg" in
- -D*|-I*)
- set fnord "$@" "$arg"; shift ;;
- -*)
- ;;
- *)
- set fnord "$@" "$arg"; shift ;;
- esac
- done
- obj_suffix="`echo $object | sed 's/^.*\././'`"
- touch "$tmpdepfile"
- ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
- rm -f "$depfile"
- cat < "$tmpdepfile" > "$depfile"
- sed '1,2d' "$tmpdepfile" | tr ' ' '
-' | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile" "$tmpdepfile".bak
- ;;
-
-cpp)
- # Important note: in order to support this mode, a compiler *must*
- # always write the proprocessed file to stdout.
- "$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test $1 != '--mode=compile'; do
- shift
- done
- shift
- fi
-
- # Remove `-o $object'.
- IFS=" "
- for arg
- do
- case $arg in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift # fnord
- shift # $arg
- ;;
- esac
- done
-
- "$@" -E |
- sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
- sed '$ s: \\$::' > "$tmpdepfile"
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- cat < "$tmpdepfile" >> "$depfile"
- sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-msvisualcpp)
- # Important note: in order to support this mode, a compiler *must*
- # always write the proprocessed file to stdout, regardless of -o,
- # because we must use -o when running libtool.
- "$@" || exit $?
- IFS=" "
- for arg
- do
- case "$arg" in
- "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
- set fnord "$@"
- shift
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift
- shift
- ;;
- esac
- done
- "$@" -E |
- sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
- echo " " >> "$depfile"
- . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-none)
- exec "$@"
- ;;
-
-*)
- echo "Unknown depmode $depmode" 1>&2
- exit 1
- ;;
-esac
-
-exit 0
+++ /dev/null
-# Makefile.in generated by automake 1.7 from Makefile.am.
-# @configure_input@
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Automakefile for the enscript documentation.
-# Copyright (c) 1998-1999 Markku Rossi
-#
-# Author: Markku Rossi <mtr@iki.fi>
-#
-
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-#
-# along with this program; see the file COPYING. If not, write to
-# the Free Software Foundation, 51 Franklin Street, Fifth Floor,
-# Boston, MA 02110-1301, USA.
-#
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
-
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_triplet = @host@
-ACLOCAL = @ACLOCAL@
-ALLOCA = @ALLOCA@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
-CATOBJEXT = @CATOBJEXT@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DATADIRNAME = @DATADIRNAME@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GENCAT = @GENCAT@
-GLIBC21 = @GLIBC21@
-GMSGFMT = @GMSGFMT@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTOBJEXT = @INSTOBJEXT@
-INTLBISON = @INTLBISON@
-INTLLIBS = @INTLLIBS@
-INTLOBJS = @INTLOBJS@
-INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
-LDFLAGS = @LDFLAGS@
-LEX = @LEX@
-LEXLIB = @LEXLIB@
-LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MEDIA = @MEDIA@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-MSGFMT = @MSGFMT@
-MSGMERGE = @MSGMERGE@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-POSUB = @POSUB@
-PSLEVEL = @PSLEVEL@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SPOOLER = @SPOOLER@
-STRIP = @STRIP@
-U = @U@
-USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-YACC = @YACC@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__include = @am__include@
-am__quote = @am__quote@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-
-info_TEXINFOS = enscript.texi
-
-man_MANS = enscript.1 states.1
-
-EXTRA_DIST = enscript.man states.man FAQ.html clean-nroff.pl texinfo.tex
-
-SUFFIXES = .1 .man
-subdir = docs
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-DIST_SOURCES =
-am__TEXINFO_TEX_DIR = $(srcdir)
-INFO_DEPS = enscript.info
-DVIS = enscript.dvi
-PDFS = enscript.pdf
-PSS = enscript.ps
-TEXINFOS = enscript.texi
-
-NROFF = nroff
-MANS = $(man_MANS)
-DIST_COMMON = ChangeLog Makefile.am Makefile.in mdate-sh stamp-vti \
- texinfo.tex version.texi
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .1 .man .dvi .info .pdf .ps .texi
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu docs/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
-
-.texi.info:
- @rm -f $@ $@-[0-9] $@-[0-9][0-9]
- $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
- `test -f '$<' || echo '$(srcdir)/'`$< -o $@
-
-.texi.dvi:
- TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
- MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
- $(TEXI2DVI) `test -f '$<' || echo '$(srcdir)/'`$<
-
-.texi.pdf:
- TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
- MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
- $(TEXI2PDF) `test -f '$<' || echo '$(srcdir)/'`$<
-enscript.info: enscript.texi version.texi
-enscript.dvi: enscript.texi version.texi
-enscript.pdf: enscript.texi version.texi
-version.texi: stamp-vti
-stamp-vti: enscript.texi $(top_srcdir)/configure.in
- @(dir=.; test -f ./enscript.texi || dir=$(srcdir); \
- set `$(SHELL) $(srcdir)/mdate-sh $$dir/enscript.texi`; \
- echo "@set UPDATED $$1 $$2 $$3"; \
- echo "@set UPDATED-MONTH $$2 $$3"; \
- echo "@set EDITION $(VERSION)"; \
- echo "@set VERSION $(VERSION)") > vti.tmp
- @cmp -s vti.tmp version.texi \
- || (echo "Updating version.texi"; \
- cp vti.tmp version.texi)
- -@rm -f vti.tmp
- @cp version.texi $@
-
-mostlyclean-vti:
- -rm -f vti.tmp
-
-maintainer-clean-vti:
- -rm -f stamp-vti version.texi
-TEXI2DVI = texi2dvi
-
-TEXI2PDF = $(TEXI2DVI) --pdf --batch
-DVIPS = dvips
-.dvi.ps:
- $(DVIPS) $< -o $@
-
-uninstall-info-am:
- $(PRE_UNINSTALL)
- @if (install-info --version && \
- install-info --version | grep -i -v debian) >/dev/null 2>&1; then \
- list='$(INFO_DEPS)'; \
- for file in $$list; do \
- echo " install-info --info-dir=$(DESTDIR)$(infodir) --remove $(DESTDIR)$(infodir)/$$file"; \
- install-info --info-dir=$(DESTDIR)$(infodir) --remove $(DESTDIR)$(infodir)/$$file; \
- done; \
- else :; fi
- @$(NORMAL_UNINSTALL)
- @list='$(INFO_DEPS)'; \
- for file in $$list; do \
- (if cd $(DESTDIR)$(infodir); then \
- echo " rm -f $$file $$file-[0-9] $$file-[0-9][0-9])"; \
- rm -f $$file $$file-[0-9] $$file-[0-9][0-9]; \
- else :; fi); \
- done
-
-dist-info: $(INFO_DEPS)
- list='$(INFO_DEPS)'; \
- for base in $$list; do \
- if test -f $$base; then d=.; else d=$(srcdir); fi; \
- for file in $$d/$$base*; do \
- relfile=`expr "$$file" : "$$d/\(.*\)"`; \
- test -f $(distdir)/$$relfile || \
- cp -p $$file $(distdir)/$$relfile; \
- done; \
- done
-
-mostlyclean-aminfo:
- -rm -f enscript.aux enscript.cp enscript.cps enscript.fn enscript.ky \
- enscript.log enscript.pg enscript.tmp enscript.toc \
- enscript.tp enscript.vr enscript.dvi enscript.pdf enscript.ps
-
-maintainer-clean-aminfo:
- list='$(INFO_DEPS)'; for i in $$list; do \
- rm -f $$i; \
- if test "`echo $$i-[0-9]*`" != "$$i-[0-9]*"; then \
- rm -f $$i-[0-9]*; \
- fi; \
- done
-
-man1dir = $(mandir)/man1
-install-man1: $(man1_MANS) $(man_MANS)
- @$(NORMAL_INSTALL)
- $(mkinstalldirs) $(DESTDIR)$(man1dir)
- @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.1*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
- else file=$$i; fi; \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 1*) ;; \
- *) ext='1' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \
- $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \
- done
-uninstall-man1:
- @$(NORMAL_UNINSTALL)
- @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.1*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \
- rm -f $(DESTDIR)$(man1dir)/$$inst; \
- done
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = ..
-distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkinstalldirs) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$(top_distdir)" distdir="$(distdir)" \
- dist-info
-check-am: all-am
-check: check-am
-all-am: Makefile $(INFO_DEPS) $(MANS)
-
-installdirs:
- $(mkinstalldirs) $(DESTDIR)$(infodir) $(DESTDIR)$(man1dir)
-
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -rm -f Makefile $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
-
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am: $(DVIS)
-
-info: info-am
-
-info-am: $(INFO_DEPS)
-
-install-data-am: install-info-am install-man
-
-install-exec-am:
-
-install-info: install-info-am
-
-install-info-am: $(INFO_DEPS)
- @$(NORMAL_INSTALL)
- $(mkinstalldirs) $(DESTDIR)$(infodir)
- @list='$(INFO_DEPS)'; \
- for file in $$list; do \
- if test -f $$file; then d=.; else d=$(srcdir); fi; \
- for ifile in echo $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9]; do \
- if test -f $$ifile; then \
- relfile=`expr "$$ifile" : "$$d/\(.*\)"`; \
- echo " $(INSTALL_DATA) $$ifile $(DESTDIR)$(infodir)/$$relfile"; \
- $(INSTALL_DATA) $$ifile $(DESTDIR)$(infodir)/$$relfile; \
- else : ; fi; \
- done; \
- done
- @$(POST_INSTALL)
- @if (install-info --version && \
- install-info --version | grep -i -v debian) >/dev/null 2>&1; then \
- list='$(INFO_DEPS)'; \
- for file in $$list; do \
- echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\
- install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\
- done; \
- else : ; fi
-install-man: install-man1
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-
-maintainer-clean-am: distclean-am maintainer-clean-aminfo \
- maintainer-clean-generic maintainer-clean-vti
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-aminfo mostlyclean-generic mostlyclean-vti
-
-pdf: pdf-am
-
-pdf-am: $(PDFS)
-
-ps: ps-am
-
-ps-am: $(PSS)
-
-uninstall-am: uninstall-info-am uninstall-man
-
-uninstall-man: uninstall-man1
-
-.PHONY: all all-am check check-am clean clean-generic dist-info \
- distclean distclean-generic distdir dvi dvi-am info info-am \
- install install-am install-data install-data-am install-exec \
- install-exec-am install-info install-info-am install-man \
- install-man1 install-strip installcheck installcheck-am \
- installdirs maintainer-clean maintainer-clean-aminfo \
- maintainer-clean-generic maintainer-clean-vti mostlyclean \
- mostlyclean-aminfo mostlyclean-generic mostlyclean-vti pdf \
- pdf-am ps ps-am uninstall uninstall-am uninstall-info-am \
- uninstall-man uninstall-man1
-
-
-enscript.man.html: enscript.1
- nroff -man $(srcdir)/enscript.1 | ./clean-nroff.pl > enscript.tmp
- enscript -E --color -q -Whtml -penscript.man.html enscript.tmp
- rm -f enscript.tmp
-
-.man.1:
- sed 's%@DATADIR@%$(datadir)%g; s%@media@%@MEDIA@%g; s%@SYSCONFDIR@%$(sysconfdir)%g' \
- $< > $@
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-#!/bin/sh
-# Get modification time of a file or directory and pretty-print it.
-# Copyright (C) 1995, 1996, 1997 Free Software Foundation, Inc.
-# written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, June 1995
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-
-# Prevent date giving response in another language.
-LANG=C
-export LANG
-LC_ALL=C
-export LC_ALL
-LC_TIME=C
-export LC_TIME
-
-# Get the extended ls output of the file or directory.
-# On HPUX /bin/sh, "set" interprets "-rw-r--r--" as options, so the "x" below.
-if ls -L /dev/null 1>/dev/null 2>&1; then
- set - x`ls -L -l -d $1`
-else
- set - x`ls -l -d $1`
-fi
-# The month is at least the fourth argument
-# (3 shifts here, the next inside the loop).
-shift
-shift
-shift
-
-# Find the month. Next argument is day, followed by the year or time.
-month=
-until test $month
-do
- shift
- case $1 in
- Jan) month=January; nummonth=1;;
- Feb) month=February; nummonth=2;;
- Mar) month=March; nummonth=3;;
- Apr) month=April; nummonth=4;;
- May) month=May; nummonth=5;;
- Jun) month=June; nummonth=6;;
- Jul) month=July; nummonth=7;;
- Aug) month=August; nummonth=8;;
- Sep) month=September; nummonth=9;;
- Oct) month=October; nummonth=10;;
- Nov) month=November; nummonth=11;;
- Dec) month=December; nummonth=12;;
- esac
-done
-
-day=$2
-
-# Here we have to deal with the problem that the ls output gives either
-# the time of day or the year.
-case $3 in
- *:*) set `date`; eval year=\$$#
- case $2 in
- Jan) nummonthtod=1;;
- Feb) nummonthtod=2;;
- Mar) nummonthtod=3;;
- Apr) nummonthtod=4;;
- May) nummonthtod=5;;
- Jun) nummonthtod=6;;
- Jul) nummonthtod=7;;
- Aug) nummonthtod=8;;
- Sep) nummonthtod=9;;
- Oct) nummonthtod=10;;
- Nov) nummonthtod=11;;
- Dec) nummonthtod=12;;
- esac
- # For the first six month of the year the time notation can also
- # be used for files modified in the last year.
- if (expr $nummonth \> $nummonthtod) > /dev/null;
- then
- year=`expr $year - 1`
- fi;;
- *) year=$3;;
-esac
-
-# The result.
-echo $day $month $year
+++ /dev/null
-% texinfo.tex -- TeX macros to handle Texinfo files.
-%
-% Load plain if necessary, i.e., if running under initex.
-\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
-%
-\def\texinfoversion{1998-11-13}%
-%
-% Copyright (C) 1985, 86, 88, 90, 91, 92, 93, 94, 95, 96, 97, 98
-% Free Software Foundation, Inc.
-%
-% This texinfo.tex file is free software; you can redistribute it and/or
-% modify it under the terms of the GNU General Public License as
-% published by the Free Software Foundation; either version 2, or (at
-% your option) any later version.
-%
-% This texinfo.tex file is distributed in the hope that it will be
-% useful, but WITHOUT ANY WARRANTY; without even the implied warranty
-% of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-% General Public License for more details.
-%
-% You should have received a copy of the GNU General Public License
-% along with this texinfo.tex file; see the file COPYING. If not, write
-% to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-% Boston, MA 02110-1301, USA.
-%
-% In other words, you are welcome to use, share and improve this program.
-% You are forbidden to forbid anyone else to use, share and improve
-% what you give them. Help stamp out software-hoarding!
-%
-% Please try the latest version of texinfo.tex before submitting bug
-% reports; you can get the latest version from:
-% ftp://ftp.gnu.org/pub/gnu/texinfo.tex
-% /home/gd/gnu/doc/texinfo.tex on the GNU machines.
-% (and all GNU mirrors, see http://www.gnu.org/order/ftp.html)
-% ftp://tug.org/tex/texinfo.tex
-% ftp://ctan.org/macros/texinfo/texinfo.tex
-% (and all CTAN mirrors, finger ctan@ctan.org for a list).
-% The texinfo.tex in the texinfo distribution itself could well be out
-% of date, so if that's what you're using, please check.
-%
-% Send bug reports to bug-texinfo@gnu.org.
-% Please include a precise test case in each bug report,
-% including a complete document with which we can reproduce the problem.
-%
-% To process a Texinfo manual with TeX, it's most reliable to use the
-% texi2dvi shell script that comes with the distribution. For simple
-% manuals, however, you can get away with:
-% tex foo.texi
-% texindex foo.??
-% tex foo.texi
-% tex foo.texi
-% dvips foo.dvi -o # or whatever, to process the dvi file.
-% The extra runs of TeX get the cross-reference information correct.
-% Sometimes one run after texindex suffices, and sometimes you need more
-% than two; texi2dvi does it as many times as necessary.
-
-\message{Loading texinfo [version \texinfoversion]:}
-
-% If in a .fmt file, print the version number
-% and turn on active characters that we couldn't do earlier because
-% they might have appeared in the input file name.
-\everyjob{\message{[Texinfo version \texinfoversion]}%
- \catcode`+=\active \catcode`\_=\active}
-
-% Save some parts of plain tex whose names we will redefine.
-
-\let\ptexb=\b
-\let\ptexbullet=\bullet
-\let\ptexc=\c
-\let\ptexcomma=\,
-\let\ptexdot=\.
-\let\ptexdots=\dots
-\let\ptexend=\end
-\let\ptexequiv=\equiv
-\let\ptexexclam=\!
-\let\ptexi=\i
-\let\ptexlbrace=\{
-\let\ptexrbrace=\}
-\let\ptexstar=\*
-\let\ptext=\t
-
-% We never want plain's outer \+ definition in Texinfo.
-% For @tex, we can use \tabalign.
-\let\+ = \relax
-
-
-\message{Basics,}
-\chardef\other=12
-
-% If this character appears in an error message or help string, it
-% starts a new line in the output.
-\newlinechar = `^^J
-
-% Set up fixed words for English if not already set.
-\ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi
-\ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi
-\ifx\putwordfile\undefined \gdef\putwordfile{file}\fi
-\ifx\putwordInfo\undefined \gdef\putwordInfo{Info}\fi
-\ifx\putwordMethodon\undefined \gdef\putwordMethodon{Method on}\fi
-\ifx\putwordon\undefined \gdef\putwordon{on}\fi
-\ifx\putwordpage\undefined \gdef\putwordpage{page}\fi
-\ifx\putwordsection\undefined \gdef\putwordsection{section}\fi
-\ifx\putwordSection\undefined \gdef\putwordSection{Section}\fi
-\ifx\putwordsee\undefined \gdef\putwordsee{see}\fi
-\ifx\putwordSee\undefined \gdef\putwordSee{See}\fi
-\ifx\putwordShortContents\undefined \gdef\putwordShortContents{Short Contents}\fi
-\ifx\putwordTableofContents\undefined\gdef\putwordTableofContents{Table of Contents}\fi
-
-% Ignore a token.
-%
-\def\gobble#1{}
-
-\hyphenation{ap-pen-dix}
-\hyphenation{mini-buf-fer mini-buf-fers}
-\hyphenation{eshell}
-\hyphenation{white-space}
-
-% Margin to add to right of even pages, to left of odd pages.
-\newdimen \bindingoffset
-\newdimen \normaloffset
-\newdimen\pagewidth \newdimen\pageheight
-
-% Sometimes it is convenient to have everything in the transcript file
-% and nothing on the terminal. We don't just call \tracingall here,
-% since that produces some useless output on the terminal.
-%
-\def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}%
-\ifx\eTeXversion\undefined
-\def\loggingall{\tracingcommands2 \tracingstats2
- \tracingpages1 \tracingoutput1 \tracinglostchars1
- \tracingmacros2 \tracingparagraphs1 \tracingrestores1
- \showboxbreadth\maxdimen\showboxdepth\maxdimen
-}%
-\else
-\def\loggingall{\tracingcommands3 \tracingstats2
- \tracingpages1 \tracingoutput1 \tracinglostchars1
- \tracingmacros2 \tracingparagraphs1 \tracingrestores1
- \tracingscantokens1 \tracingassigns1 \tracingifs1
- \tracinggroups1 \tracingnesting2
- \showboxbreadth\maxdimen\showboxdepth\maxdimen
-}%
-\fi
-
-% For @cropmarks command.
-% Do @cropmarks to get crop marks.
-%
-\newif\ifcropmarks
-\let\cropmarks = \cropmarkstrue
-%
-% Dimensions to add cropmarks at corners.
-% Added by P. A. MacKay, 12 Nov. 1986
-%
-\newdimen\outerhsize \newdimen\outervsize % set by the paper size routines
-\newdimen\cornerlong \cornerlong=1pc
-\newdimen\cornerthick \cornerthick=.3pt
-\newdimen\topandbottommargin \topandbottommargin=.75in
-
-% Main output routine.
-\chardef\PAGE = 255
-\output = {\onepageout{\pagecontents\PAGE}}
-
-\newbox\headlinebox
-\newbox\footlinebox
-
-% \onepageout takes a vbox as an argument. Note that \pagecontents
-% does insertions, but you have to call it yourself.
-\def\onepageout#1{%
- \ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi
- %
- \ifodd\pageno \advance\hoffset by \bindingoffset
- \else \advance\hoffset by -\bindingoffset\fi
- %
- % Do this outside of the \shipout so @code etc. will be expanded in
- % the headline as they should be, not taken literally (outputting ''code).
- \setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}%
- \setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}%
- %
- {%
- % Have to do this stuff outside the \shipout because we want it to
- % take effect in \write's, yet the group defined by the \vbox ends
- % before the \shipout runs.
- %
- \escapechar = `\\ % use backslash in output files.
- \indexdummies % don't expand commands in the output.
- \normalturnoffactive % \ in index entries must not stay \, e.g., if
- % the page break happens to be in the middle of an example.
- \shipout\vbox{%
- \ifcropmarks \vbox to \outervsize\bgroup
- \hsize = \outerhsize
- \vskip-\topandbottommargin
- \vtop to0pt{%
- \line{\ewtop\hfil\ewtop}%
- \nointerlineskip
- \line{%
- \vbox{\moveleft\cornerthick\nstop}%
- \hfill
- \vbox{\moveright\cornerthick\nstop}%
- }%
- \vss}%
- \vskip\topandbottommargin
- \line\bgroup
- \hfil % center the page within the outer (page) hsize.
- \ifodd\pageno\hskip\bindingoffset\fi
- \vbox\bgroup
- \fi
- %
- \unvbox\headlinebox
- \pagebody{#1}%
- \ifdim\ht\footlinebox > 0pt
- % Only leave this space if the footline is nonempty.
- % (We lessened \vsize for it in \oddfootingxxx.)
- % The \baselineskip=24pt in plain's \makefootline has no effect.
- \vskip 2\baselineskip
- \unvbox\footlinebox
- \fi
- %
- \ifcropmarks
- \egroup % end of \vbox\bgroup
- \hfil\egroup % end of (centering) \line\bgroup
- \vskip\topandbottommargin plus1fill minus1fill
- \boxmaxdepth = \cornerthick
- \vbox to0pt{\vss
- \line{%
- \vbox{\moveleft\cornerthick\nsbot}%
- \hfill
- \vbox{\moveright\cornerthick\nsbot}%
- }%
- \nointerlineskip
- \line{\ewbot\hfil\ewbot}%
- }%
- \egroup % \vbox from first cropmarks clause
- \fi
- }% end of \shipout\vbox
- }% end of group with \turnoffactive
- \advancepageno
- \ifnum\outputpenalty>-20000 \else\dosupereject\fi
-}
-
-\newinsert\margin \dimen\margin=\maxdimen
-
-\def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}}
-{\catcode`\@ =11
-\gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi
-% marginal hacks, juha@viisa.uucp (Juha Takala)
-\ifvoid\margin\else % marginal info is present
- \rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi
-\dimen@=\dp#1 \unvbox#1
-\ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi
-\ifr@ggedbottom \kern-\dimen@ \vfil \fi}
-}
-
-% Here are the rules for the cropmarks. Note that they are
-% offset so that the space between them is truly \outerhsize or \outervsize
-% (P. A. MacKay, 12 November, 1986)
-%
-\def\ewtop{\vrule height\cornerthick depth0pt width\cornerlong}
-\def\nstop{\vbox
- {\hrule height\cornerthick depth\cornerlong width\cornerthick}}
-\def\ewbot{\vrule height0pt depth\cornerthick width\cornerlong}
-\def\nsbot{\vbox
- {\hrule height\cornerlong depth\cornerthick width\cornerthick}}
-
-% Parse an argument, then pass it to #1. The argument is the rest of
-% the input line (except we remove a trailing comment). #1 should be a
-% macro which expects an ordinary undelimited TeX argument.
-%
-\def\parsearg#1{%
- \let\next = #1%
- \begingroup
- \obeylines
- \futurelet\temp\parseargx
-}
-
-% If the next token is an obeyed space (from an @example environment or
-% the like), remove it and recurse. Otherwise, we're done.
-\def\parseargx{%
- % \obeyedspace is defined far below, after the definition of \sepspaces.
- \ifx\obeyedspace\temp
- \expandafter\parseargdiscardspace
- \else
- \expandafter\parseargline
- \fi
-}
-
-% Remove a single space (as the delimiter token to the macro call).
-{\obeyspaces %
- \gdef\parseargdiscardspace {\futurelet\temp\parseargx}}
-
-{\obeylines %
- \gdef\parseargline#1^^M{%
- \endgroup % End of the group started in \parsearg.
- %
- % First remove any @c comment, then any @comment.
- % Result of each macro is put in \toks0.
- \argremovec #1\c\relax %
- \expandafter\argremovecomment \the\toks0 \comment\relax %
- %
- % Call the caller's macro, saved as \next in \parsearg.
- \expandafter\next\expandafter{\the\toks0}%
- }%
-}
-
-% Since all \c{,omment} does is throw away the argument, we can let TeX
-% do that for us. The \relax here is matched by the \relax in the call
-% in \parseargline; it could be more or less anything, its purpose is
-% just to delimit the argument to the \c.
-\def\argremovec#1\c#2\relax{\toks0 = {#1}}
-\def\argremovecomment#1\comment#2\relax{\toks0 = {#1}}
-
-% \argremovec{,omment} might leave us with trailing spaces, though; e.g.,
-% @end itemize @c foo
-% will have two active spaces as part of the argument with the
-% `itemize'. Here we remove all active spaces from #1, and assign the
-% result to \toks0.
-%
-% This loses if there are any *other* active characters besides spaces
-% in the argument -- _ ^ +, for example -- since they get expanded.
-% Fortunately, Texinfo does not define any such commands. (If it ever
-% does, the catcode of the characters in questionwill have to be changed
-% here.) But this means we cannot call \removeactivespaces as part of
-% \argremovec{,omment}, since @c uses \parsearg, and thus the argument
-% that \parsearg gets might well have any character at all in it.
-%
-\def\removeactivespaces#1{%
- \begingroup
- \ignoreactivespaces
- \edef\temp{#1}%
- \global\toks0 = \expandafter{\temp}%
- \endgroup
-}
-
-% Change the active space to expand to nothing.
-%
-\begingroup
- \obeyspaces
- \gdef\ignoreactivespaces{\obeyspaces\let =\empty}
-\endgroup
-
-
-\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next}
-
-%% These are used to keep @begin/@end levels from running away
-%% Call \inENV within environments (after a \begingroup)
-\newif\ifENV \ENVfalse \def\inENV{\ifENV\relax\else\ENVtrue\fi}
-\def\ENVcheck{%
-\ifENV\errmessage{Still within an environment; press RETURN to continue}
-\endgroup\fi} % This is not perfect, but it should reduce lossage
-
-% @begin foo is the same as @foo, for now.
-\newhelp\EMsimple{Press RETURN to continue.}
-
-\outer\def\begin{\parsearg\beginxxx}
-
-\def\beginxxx #1{%
-\expandafter\ifx\csname #1\endcsname\relax
-{\errhelp=\EMsimple \errmessage{Undefined command @begin #1}}\else
-\csname #1\endcsname\fi}
-
-% @end foo executes the definition of \Efoo.
-%
-\def\end{\parsearg\endxxx}
-\def\endxxx #1{%
- \removeactivespaces{#1}%
- \edef\endthing{\the\toks0}%
- %
- \expandafter\ifx\csname E\endthing\endcsname\relax
- \expandafter\ifx\csname \endthing\endcsname\relax
- % There's no \foo, i.e., no ``environment'' foo.
- \errhelp = \EMsimple
- \errmessage{Undefined command `@end \endthing'}%
- \else
- \unmatchedenderror\endthing
- \fi
- \else
- % Everything's ok; the right environment has been started.
- \csname E\endthing\endcsname
- \fi
-}
-
-% There is an environment #1, but it hasn't been started. Give an error.
-%
-\def\unmatchedenderror#1{%
- \errhelp = \EMsimple
- \errmessage{This `@end #1' doesn't have a matching `@#1'}%
-}
-
-% Define the control sequence \E#1 to give an unmatched @end error.
-%
-\def\defineunmatchedend#1{%
- \expandafter\def\csname E#1\endcsname{\unmatchedenderror{#1}}%
-}
-
-
-% Single-spacing is done by various environments (specifically, in
-% \nonfillstart and \quotations).
-\newskip\singlespaceskip \singlespaceskip = 12.5pt
-\def\singlespace{%
- % Why was this kern here? It messes up equalizing space above and below
- % environments. --karl, 6may93
- %{\advance \baselineskip by -\singlespaceskip
- %\kern \baselineskip}%
- \setleading \singlespaceskip
-}
-
-%% Simple single-character @ commands
-
-% @@ prints an @
-% Kludge this until the fonts are right (grr).
-\def\@{{\tt\char64}}
-
-% This is turned off because it was never documented
-% and you can use @w{...} around a quote to suppress ligatures.
-%% Define @` and @' to be the same as ` and '
-%% but suppressing ligatures.
-%\def\`{{`}}
-%\def\'{{'}}
-
-% Used to generate quoted braces.
-\def\mylbrace {{\tt\char123}}
-\def\myrbrace {{\tt\char125}}
-\let\{=\mylbrace
-\let\}=\myrbrace
-\begingroup
- % Definitions to produce actual \{ & \} command in an index.
- \catcode`\{ = 12 \catcode`\} = 12
- \catcode`\[ = 1 \catcode`\] = 2
- \catcode`\@ = 0 \catcode`\\ = 12
- @gdef@lbracecmd[\{]%
- @gdef@rbracecmd[\}]%
-@endgroup
-
-% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent
-% Others are defined by plain TeX: @` @' @" @^ @~ @= @v @H.
-\let\, = \c
-\let\dotaccent = \.
-\def\ringaccent#1{{\accent23 #1}}
-\let\tieaccent = \t
-\let\ubaraccent = \b
-\let\udotaccent = \d
-
-% Other special characters: @questiondown @exclamdown
-% Plain TeX defines: @AA @AE @O @OE @L (and lowercase versions) @ss.
-\def\questiondown{?`}
-\def\exclamdown{!`}
-
-% Dotless i and dotless j, used for accents.
-\def\imacro{i}
-\def\jmacro{j}
-\def\dotless#1{%
- \def\temp{#1}%
- \ifx\temp\imacro \ptexi
- \else\ifx\temp\jmacro \j
- \else \errmessage{@dotless can be used only with i or j}%
- \fi\fi
-}
-
-% Be sure we're in horizontal mode when doing a tie, since we make space
-% equivalent to this in @example-like environments. Otherwise, a space
-% at the beginning of a line will start with \penalty -- and
-% since \penalty is valid in vertical mode, we'd end up putting the
-% penalty on the vertical list instead of in the new paragraph.
-{\catcode`@ = 11
- % Avoid using \@M directly, because that causes trouble
- % if the definition is written into an index file.
- \global\let\tiepenalty = \@M
- \gdef\tie{\leavevmode\penalty\tiepenalty\ }
-}
-
-% @: forces normal size whitespace following.
-\def\:{\spacefactor=1000 }
-
-% @* forces a line break.
-\def\*{\hfil\break\hbox{}\ignorespaces}
-
-% @. is an end-of-sentence period.
-\def\.{.\spacefactor=3000 }
-
-% @! is an end-of-sentence bang.
-\def\!{!\spacefactor=3000 }
-
-% @? is an end-of-sentence query.
-\def\?{?\spacefactor=3000 }
-
-% @w prevents a word break. Without the \leavevmode, @w at the
-% beginning of a paragraph, when TeX is still in vertical mode, would
-% produce a whole line of output instead of starting the paragraph.
-\def\w#1{\leavevmode\hbox{#1}}
-
-% @group ... @end group forces ... to be all on one page, by enclosing
-% it in a TeX vbox. We use \vtop instead of \vbox to construct the box
-% to keep its height that of a normal line. According to the rules for
-% \topskip (p.114 of the TeXbook), the glue inserted is
-% max (\topskip - \ht (first item), 0). If that height is large,
-% therefore, no glue is inserted, and the space between the headline and
-% the text is small, which looks bad.
-%
-\def\group{\begingroup
- \ifnum\catcode13=\active \else
- \errhelp = \groupinvalidhelp
- \errmessage{@group invalid in context where filling is enabled}%
- \fi
- %
- % The \vtop we start below produces a box with normal height and large
- % depth; thus, TeX puts \baselineskip glue before it, and (when the
- % next line of text is done) \lineskip glue after it. (See p.82 of
- % the TeXbook.) Thus, space below is not quite equal to space
- % above. But it's pretty close.
- \def\Egroup{%
- \egroup % End the \vtop.
- \endgroup % End the \group.
- }%
- %
- \vtop\bgroup
- % We have to put a strut on the last line in case the @group is in
- % the midst of an example, rather than completely enclosing it.
- % Otherwise, the interline space between the last line of the group
- % and the first line afterwards is too small. But we can't put the
- % strut in \Egroup, since there it would be on a line by itself.
- % Hence this just inserts a strut at the beginning of each line.
- \everypar = {\strut}%
- %
- % Since we have a strut on every line, we don't need any of TeX's
- % normal interline spacing.
- \offinterlineskip
- %
- % OK, but now we have to do something about blank
- % lines in the input in @example-like environments, which normally
- % just turn into \lisppar, which will insert no space now that we've
- % turned off the interline space. Simplest is to make them be an
- % empty paragraph.
- \ifx\par\lisppar
- \edef\par{\leavevmode \par}%
- %
- % Reset ^^M's definition to new definition of \par.
- \obeylines
- \fi
- %
- % Do @comment since we are called inside an environment such as
- % @example, where each end-of-line in the input causes an
- % end-of-line in the output. We don't want the end-of-line after
- % the `@group' to put extra space in the output. Since @group
- % should appear on a line by itself (according to the Texinfo
- % manual), we don't worry about eating any user text.
- \comment
-}
-%
-% TeX puts in an \escapechar (i.e., `@') at the beginning of the help
-% message, so this ends up printing `@group can only ...'.
-%
-\newhelp\groupinvalidhelp{%
-group can only be used in environments such as @example,^^J%
-where each line of input produces a line of output.}
-
-% @need space-in-mils
-% forces a page break if there is not space-in-mils remaining.
-
-\newdimen\mil \mil=0.001in
-
-\def\need{\parsearg\needx}
-
-% Old definition--didn't work.
-%\def\needx #1{\par %
-%% This method tries to make TeX break the page naturally
-%% if the depth of the box does not fit.
-%{\baselineskip=0pt%
-%\vtop to #1\mil{\vfil}\kern -#1\mil\nobreak
-%\prevdepth=-1000pt
-%}}
-
-\def\needx#1{%
- % Go into vertical mode, so we don't make a big box in the middle of a
- % paragraph.
- \par
- %
- % Don't add any leading before our big empty box, but allow a page
- % break, since the best break might be right here.
- \allowbreak
- \nointerlineskip
- \vtop to #1\mil{\vfil}%
- %
- % TeX does not even consider page breaks if a penalty added to the
- % main vertical list is 10000 or more. But in order to see if the
- % empty box we just added fits on the page, we must make it consider
- % page breaks. On the other hand, we don't want to actually break the
- % page after the empty box. So we use a penalty of 9999.
- %
- % There is an extremely small chance that TeX will actually break the
- % page at this \penalty, if there are no other feasible breakpoints in
- % sight. (If the user is using lots of big @group commands, which
- % almost-but-not-quite fill up a page, TeX will have a hard time doing
- % good page breaking, for example.) However, I could not construct an
- % example where a page broke at this \penalty; if it happens in a real
- % document, then we can reconsider our strategy.
- \penalty9999
- %
- % Back up by the size of the box, whether we did a page break or not.
- \kern -#1\mil
- %
- % Do not allow a page break right after this kern.
- \nobreak
-}
-
-% @br forces paragraph break
-
-\let\br = \par
-
-% @dots{} output an ellipsis using the current font.
-% We do .5em per period so that it has the same spacing in a typewriter
-% font as three actual period characters.
-%
-\def\dots{%
- \leavevmode
- \hbox to 1.5em{%
- \hskip 0pt plus 0.25fil minus 0.25fil
- .\hss.\hss.%
- \hskip 0pt plus 0.5fil minus 0.5fil
- }%
-}
-
-% @enddots{} is an end-of-sentence ellipsis.
-%
-\def\enddots{%
- \leavevmode
- \hbox to 2em{%
- \hskip 0pt plus 0.25fil minus 0.25fil
- .\hss.\hss.\hss.%
- \hskip 0pt plus 0.5fil minus 0.5fil
- }%
- \spacefactor=3000
-}
-
-
-% @page forces the start of a new page
-%
-\def\page{\par\vfill\supereject}
-
-% @exdent text....
-% outputs text on separate line in roman font, starting at standard page margin
-
-% This records the amount of indent in the innermost environment.
-% That's how much \exdent should take out.
-\newskip\exdentamount
-
-% This defn is used inside fill environments such as @defun.
-\def\exdent{\parsearg\exdentyyy}
-\def\exdentyyy #1{{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}}
-
-% This defn is used inside nofill environments such as @example.
-\def\nofillexdent{\parsearg\nofillexdentyyy}
-\def\nofillexdentyyy #1{{\advance \leftskip by -\exdentamount
-\leftline{\hskip\leftskip{\rm#1}}}}
-
-% @inmargin{TEXT} puts TEXT in the margin next to the current paragraph.
-
-\def\inmargin#1{%
-\strut\vadjust{\nobreak\kern-\strutdepth
- \vtop to \strutdepth{\baselineskip\strutdepth\vss
- \llap{\rightskip=\inmarginspacing \vbox{\noindent #1}}\null}}}
-\newskip\inmarginspacing \inmarginspacing=1cm
-\def\strutdepth{\dp\strutbox}
-
-%\hbox{{\rm#1}}\hfil\break}}
-
-% @include file insert text of that file as input.
-% Allow normal characters that we make active in the argument (a file name).
-\def\include{\begingroup
- \catcode`\\=12
- \catcode`~=12
- \catcode`^=12
- \catcode`_=12
- \catcode`|=12
- \catcode`<=12
- \catcode`>=12
- \catcode`+=12
- \parsearg\includezzz}
-% Restore active chars for included file.
-\def\includezzz#1{\endgroup\begingroup
- % Read the included file in a group so nested @include's work.
- \def\thisfile{#1}%
- \input\thisfile
-\endgroup}
-
-\def\thisfile{}
-
-% @center line outputs that line, centered
-
-\def\center{\parsearg\centerzzz}
-\def\centerzzz #1{{\advance\hsize by -\leftskip
-\advance\hsize by -\rightskip
-\centerline{#1}}}
-
-% @sp n outputs n lines of vertical space
-
-\def\sp{\parsearg\spxxx}
-\def\spxxx #1{\vskip #1\baselineskip}
-
-% @comment ...line which is ignored...
-% @c is the same as @comment
-% @ignore ... @end ignore is another way to write a comment
-
-\def\comment{\begingroup \catcode`\^^M=\other%
-\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other%
-\commentxxx}
-{\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}}
-
-\let\c=\comment
-
-% @paragraphindent is defined for the Info formatting commands only.
-\let\paragraphindent=\comment
-
-% Prevent errors for section commands.
-% Used in @ignore and in failing conditionals.
-\def\ignoresections{%
-\let\chapter=\relax
-\let\unnumbered=\relax
-\let\top=\relax
-\let\unnumberedsec=\relax
-\let\unnumberedsection=\relax
-\let\unnumberedsubsec=\relax
-\let\unnumberedsubsection=\relax
-\let\unnumberedsubsubsec=\relax
-\let\unnumberedsubsubsection=\relax
-\let\section=\relax
-\let\subsec=\relax
-\let\subsubsec=\relax
-\let\subsection=\relax
-\let\subsubsection=\relax
-\let\appendix=\relax
-\let\appendixsec=\relax
-\let\appendixsection=\relax
-\let\appendixsubsec=\relax
-\let\appendixsubsection=\relax
-\let\appendixsubsubsec=\relax
-\let\appendixsubsubsection=\relax
-\let\contents=\relax
-\let\smallbook=\relax
-\let\titlepage=\relax
-}
-
-% Used in nested conditionals, where we have to parse the Texinfo source
-% and so want to turn off most commands, in case they are used
-% incorrectly.
-%
-\def\ignoremorecommands{%
- \let\defcodeindex = \relax
- \let\defcv = \relax
- \let\deffn = \relax
- \let\deffnx = \relax
- \let\defindex = \relax
- \let\defivar = \relax
- \let\defmac = \relax
- \let\defmethod = \relax
- \let\defop = \relax
- \let\defopt = \relax
- \let\defspec = \relax
- \let\deftp = \relax
- \let\deftypefn = \relax
- \let\deftypefun = \relax
- \let\deftypevar = \relax
- \let\deftypevr = \relax
- \let\defun = \relax
- \let\defvar = \relax
- \let\defvr = \relax
- \let\ref = \relax
- \let\xref = \relax
- \let\printindex = \relax
- \let\pxref = \relax
- \let\settitle = \relax
- \let\setchapternewpage = \relax
- \let\setchapterstyle = \relax
- \let\everyheading = \relax
- \let\evenheading = \relax
- \let\oddheading = \relax
- \let\everyfooting = \relax
- \let\evenfooting = \relax
- \let\oddfooting = \relax
- \let\headings = \relax
- \let\include = \relax
- \let\lowersections = \relax
- \let\down = \relax
- \let\raisesections = \relax
- \let\up = \relax
- \let\set = \relax
- \let\clear = \relax
- \let\item = \relax
-}
-
-% Ignore @ignore ... @end ignore.
-%
-\def\ignore{\doignore{ignore}}
-
-% Ignore @ifinfo, @ifhtml, @ifnottex, @html, @menu, and @direntry text.
-%
-\def\ifinfo{\doignore{ifinfo}}
-\def\ifhtml{\doignore{ifhtml}}
-\def\ifnottex{\doignore{ifnottex}}
-\def\html{\doignore{html}}
-\def\menu{\doignore{menu}}
-\def\direntry{\doignore{direntry}}
-
-% @dircategory CATEGORY -- specify a category of the dir file
-% which this file should belong to. Ignore this in TeX.
-\let\dircategory = \comment
-
-% Ignore text until a line `@end #1'.
-%
-\def\doignore#1{\begingroup
- % Don't complain about control sequences we have declared \outer.
- \ignoresections
- %
- % Define a command to swallow text until we reach `@end #1'.
- % This @ is a catcode 12 token (that is the normal catcode of @ in
- % this texinfo.tex file). We change the catcode of @ below to match.
- \long\def\doignoretext##1@end #1{\enddoignore}%
- %
- % Make sure that spaces turn into tokens that match what \doignoretext wants.
- \catcode32 = 10
- %
- % Ignore braces, too, so mismatched braces don't cause trouble.
- \catcode`\{ = 9
- \catcode`\} = 9
- %
- % We must not have @c interpreted as a control sequence.
- \catcode`\@ = 12
- %
- % Make the letter c a comment character so that the rest of the line
- % will be ignored. This way, the document can have (for example)
- % @c @end ifinfo
- % and the @end ifinfo will be properly ignored.
- % (We've just changed @ to catcode 12.)
- \catcode`\c = 14
- %
- % And now expand that command.
- \doignoretext
-}
-
-% What we do to finish off ignored text.
-%
-\def\enddoignore{\endgroup\ignorespaces}%
-
-\newif\ifwarnedobs\warnedobsfalse
-\def\obstexwarn{%
- \ifwarnedobs\relax\else
- % We need to warn folks that they may have trouble with TeX 3.0.
- % This uses \immediate\write16 rather than \message to get newlines.
- \immediate\write16{}
- \immediate\write16{***WARNING*** for users of Unix TeX 3.0!}
- \immediate\write16{This manual trips a bug in TeX version 3.0 (tex hangs).}
- \immediate\write16{If you are running another version of TeX, relax.}
- \immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.}
- \immediate\write16{ Then upgrade your TeX installation if you can.}
- \immediate\write16{ (See ftp://ftp.gnu.org/pub/gnu/TeX.README.)}
- \immediate\write16{If you are stuck with version 3.0, run the}
- \immediate\write16{ script ``tex3patch'' from the Texinfo distribution}
- \immediate\write16{ to use a workaround.}
- \immediate\write16{}
- \global\warnedobstrue
- \fi
-}
-
-% **In TeX 3.0, setting text in \nullfont hangs tex. For a
-% workaround (which requires the file ``dummy.tfm'' to be installed),
-% uncomment the following line:
-%%%%%\font\nullfont=dummy\let\obstexwarn=\relax
-
-% Ignore text, except that we keep track of conditional commands for
-% purposes of nesting, up to an `@end #1' command.
-%
-\def\nestedignore#1{%
- \obstexwarn
- % We must actually expand the ignored text to look for the @end
- % command, so that nested ignore constructs work. Thus, we put the
- % text into a \vbox and then do nothing with the result. To minimize
- % the change of memory overflow, we follow the approach outlined on
- % page 401 of the TeXbook: make the current font be a dummy font.
- %
- \setbox0 = \vbox\bgroup
- % Don't complain about control sequences we have declared \outer.
- \ignoresections
- %
- % Define `@end #1' to end the box, which will in turn undefine the
- % @end command again.
- \expandafter\def\csname E#1\endcsname{\egroup\ignorespaces}%
- %
- % We are going to be parsing Texinfo commands. Most cause no
- % trouble when they are used incorrectly, but some commands do
- % complicated argument parsing or otherwise get confused, so we
- % undefine them.
- %
- % We can't do anything about stray @-signs, unfortunately;
- % they'll produce `undefined control sequence' errors.
- \ignoremorecommands
- %
- % Set the current font to be \nullfont, a TeX primitive, and define
- % all the font commands to also use \nullfont. We don't use
- % dummy.tfm, as suggested in the TeXbook, because not all sites
- % might have that installed. Therefore, math mode will still
- % produce output, but that should be an extremely small amount of
- % stuff compared to the main input.
- %
- \nullfont
- \let\tenrm = \nullfont \let\tenit = \nullfont \let\tensl = \nullfont
- \let\tenbf = \nullfont \let\tentt = \nullfont \let\smallcaps = \nullfont
- \let\tensf = \nullfont
- % Similarly for index fonts (mostly for their use in
- % smallexample)
- \let\indrm = \nullfont \let\indit = \nullfont \let\indsl = \nullfont
- \let\indbf = \nullfont \let\indtt = \nullfont \let\indsc = \nullfont
- \let\indsf = \nullfont
- %
- % Don't complain when characters are missing from the fonts.
- \tracinglostchars = 0
- %
- % Don't bother to do space factor calculations.
- \frenchspacing
- %
- % Don't report underfull hboxes.
- \hbadness = 10000
- %
- % Do minimal line-breaking.
- \pretolerance = 10000
- %
- % Do not execute instructions in @tex
- \def\tex{\doignore{tex}}%
- % Do not execute macro definitions.
- % `c' is a comment character, so the word `macro' will get cut off.
- \def\macro{\doignore{ma}}%
-}
-
-% @set VAR sets the variable VAR to an empty value.
-% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE.
-%
-% Since we want to separate VAR from REST-OF-LINE (which might be
-% empty), we can't just use \parsearg; we have to insert a space of our
-% own to delimit the rest of the line, and then take it out again if we
-% didn't need it. Make sure the catcode of space is correct to avoid
-% losing inside @example, for instance.
-%
-\def\set{\begingroup\catcode` =10
- \catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR.
- \parsearg\setxxx}
-\def\setxxx#1{\setyyy#1 \endsetyyy}
-\def\setyyy#1 #2\endsetyyy{%
- \def\temp{#2}%
- \ifx\temp\empty \global\expandafter\let\csname SET#1\endcsname = \empty
- \else \setzzz{#1}#2\endsetzzz % Remove the trailing space \setxxx inserted.
- \fi
- \endgroup
-}
-% Can't use \xdef to pre-expand #2 and save some time, since \temp or
-% \next or other control sequences that we've defined might get us into
-% an infinite loop. Consider `@set foo @cite{bar}'.
-\def\setzzz#1#2 \endsetzzz{\expandafter\gdef\csname SET#1\endcsname{#2}}
-
-% @clear VAR clears (i.e., unsets) the variable VAR.
-%
-\def\clear{\parsearg\clearxxx}
-\def\clearxxx#1{\global\expandafter\let\csname SET#1\endcsname=\relax}
-
-% @value{foo} gets the text saved in variable foo.
-%
-{
- \catcode`\_ = \active
- %
- % We might end up with active _ or - characters in the argument if
- % we're called from @code, as @code{@value{foo-bar_}}. So \let any
- % such active characters to their normal equivalents.
- \gdef\value{\begingroup
- \catcode`\-=12 \catcode`\_=12
- \indexbreaks \let_\normalunderscore
- \valuexxx}
-}
-\def\valuexxx#1{\expandablevalue{#1}\endgroup}
-
-% We have this subroutine so that we can handle at least some @value's
-% properly in indexes (we \let\value to this in \indexdummies). Ones
-% whose names contain - or _ still won't work, but we can't do anything
-% about that. The command has to be fully expandable, since the result
-% winds up in the index file. This means that if the variable's value
-% contains other Texinfo commands, it's almost certain it will fail
-% (although perhaps we could fix that with sufficient work to do a
-% one-level expansion on the result, instead of complete).
-%
-\def\expandablevalue#1{%
- \expandafter\ifx\csname SET#1\endcsname\relax
- {[No value for ``#1'']}%
- \else
- \csname SET#1\endcsname
- \fi
-}
-
-% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
-% with @set.
-%
-\def\ifset{\parsearg\ifsetxxx}
-\def\ifsetxxx #1{%
- \expandafter\ifx\csname SET#1\endcsname\relax
- \expandafter\ifsetfail
- \else
- \expandafter\ifsetsucceed
- \fi
-}
-\def\ifsetsucceed{\conditionalsucceed{ifset}}
-\def\ifsetfail{\nestedignore{ifset}}
-\defineunmatchedend{ifset}
-
-% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been
-% defined with @set, or has been undefined with @clear.
-%
-\def\ifclear{\parsearg\ifclearxxx}
-\def\ifclearxxx #1{%
- \expandafter\ifx\csname SET#1\endcsname\relax
- \expandafter\ifclearsucceed
- \else
- \expandafter\ifclearfail
- \fi
-}
-\def\ifclearsucceed{\conditionalsucceed{ifclear}}
-\def\ifclearfail{\nestedignore{ifclear}}
-\defineunmatchedend{ifclear}
-
-% @iftex, @ifnothtml, @ifnotinfo always succeed; we read the text
-% following, through the first @end iftex (etc.). Make `@end iftex'
-% (etc.) valid only after an @iftex.
-%
-\def\iftex{\conditionalsucceed{iftex}}
-\def\ifnothtml{\conditionalsucceed{ifnothtml}}
-\def\ifnotinfo{\conditionalsucceed{ifnotinfo}}
-\defineunmatchedend{iftex}
-\defineunmatchedend{ifnothtml}
-\defineunmatchedend{ifnotinfo}
-
-% We can't just want to start a group at @iftex (for example) and end it
-% at @end iftex, since then @set commands inside the conditional have no
-% effect (they'd get reverted at the end of the group). So we must
-% define \Eiftex to redefine itself to be its previous value. (We can't
-% just define it to fail again with an ``unmatched end'' error, since
-% the @ifset might be nested.)
-%
-\def\conditionalsucceed#1{%
- \edef\temp{%
- % Remember the current value of \E#1.
- \let\nece{prevE#1} = \nece{E#1}%
- %
- % At the `@end #1', redefine \E#1 to be its previous value.
- \def\nece{E#1}{\let\nece{E#1} = \nece{prevE#1}}%
- }%
- \temp
-}
-
-% We need to expand lots of \csname's, but we don't want to expand the
-% control sequences after we've constructed them.
-%
-\def\nece#1{\expandafter\noexpand\csname#1\endcsname}
-
-% @asis just yields its argument. Used with @table, for example.
-%
-\def\asis#1{#1}
-
-% @math means output in math mode.
-% We don't use $'s directly in the definition of \math because control
-% sequences like \math are expanded when the toc file is written. Then,
-% we read the toc file back, the $'s will be normal characters (as they
-% should be, according to the definition of Texinfo). So we must use a
-% control sequence to switch into and out of math mode.
-%
-% This isn't quite enough for @math to work properly in indices, but it
-% seems unlikely it will ever be needed there.
-%
-\let\implicitmath = $
-\def\math#1{\implicitmath #1\implicitmath}
-
-% @bullet and @minus need the same treatment as @math, just above.
-\def\bullet{\implicitmath\ptexbullet\implicitmath}
-\def\minus{\implicitmath-\implicitmath}
-
-% @refill is a no-op.
-\let\refill=\relax
-
-% If working on a large document in chapters, it is convenient to
-% be able to disable indexing, cross-referencing, and contents, for test runs.
-% This is done with @novalidate (before @setfilename).
-%
-\newif\iflinks \linkstrue % by default we want the aux files.
-\let\novalidate = \linksfalse
-
-% @setfilename is done at the beginning of every texinfo file.
-% So open here the files we need to have open while reading the input.
-% This makes it possible to make a .fmt file for texinfo.
-\def\setfilename{%
- \iflinks
- \readauxfile
- \fi % \openindices needs to do some work in any case.
- \openindices
- \fixbackslash % Turn off hack to swallow `\input texinfo'.
- \global\let\setfilename=\comment % Ignore extra @setfilename cmds.
- %
- % If texinfo.cnf is present on the system, read it.
- % Useful for site-wide @afourpaper, etc.
- % Just to be on the safe side, close the input stream before the \input.
- \openin 1 texinfo.cnf
- \ifeof1 \let\temp=\relax \else \def\temp{\input texinfo.cnf }\fi
- \closein1
- \temp
- %
- \comment % Ignore the actual filename.
-}
-
-% Called from \setfilename.
-%
-\def\openindices{%
- \newindex{cp}%
- \newcodeindex{fn}%
- \newcodeindex{vr}%
- \newcodeindex{tp}%
- \newcodeindex{ky}%
- \newcodeindex{pg}%
-}
-
-% @bye.
-\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
-
-
-\message{fonts,}
-% Font-change commands.
-
-% Texinfo sort of supports the sans serif font style, which plain TeX does not.
-% So we set up a \sf analogous to plain's \rm, etc.
-\newfam\sffam
-\def\sf{\fam=\sffam \tensf}
-\let\li = \sf % Sometimes we call it \li, not \sf.
-
-% We don't need math for this one.
-\def\ttsl{\tenttsl}
-
-% Use Computer Modern fonts at \magstephalf (11pt).
-\newcount\mainmagstep
-\mainmagstep=\magstephalf
-
-% Set the font macro #1 to the font named #2, adding on the
-% specified font prefix (normally `cm').
-% #3 is the font's design size, #4 is a scale factor
-\def\setfont#1#2#3#4{\font#1=\fontprefix#2#3 scaled #4}
-
-% Use cm as the default font prefix.
-% To specify the font prefix, you must define \fontprefix
-% before you read in texinfo.tex.
-\ifx\fontprefix\undefined
-\def\fontprefix{cm}
-\fi
-% Support font families that don't use the same naming scheme as CM.
-\def\rmshape{r}
-\def\rmbshape{bx} %where the normal face is bold
-\def\bfshape{b}
-\def\bxshape{bx}
-\def\ttshape{tt}
-\def\ttbshape{tt}
-\def\ttslshape{sltt}
-\def\itshape{ti}
-\def\itbshape{bxti}
-\def\slshape{sl}
-\def\slbshape{bxsl}
-\def\sfshape{ss}
-\def\sfbshape{ss}
-\def\scshape{csc}
-\def\scbshape{csc}
-
-\ifx\bigger\relax
-\let\mainmagstep=\magstep1
-\setfont\textrm\rmshape{12}{1000}
-\setfont\texttt\ttshape{12}{1000}
-\else
-\setfont\textrm\rmshape{10}{\mainmagstep}
-\setfont\texttt\ttshape{10}{\mainmagstep}
-\fi
-% Instead of cmb10, you many want to use cmbx10.
-% cmbx10 is a prettier font on its own, but cmb10
-% looks better when embedded in a line with cmr10.
-\setfont\textbf\bfshape{10}{\mainmagstep}
-\setfont\textit\itshape{10}{\mainmagstep}
-\setfont\textsl\slshape{10}{\mainmagstep}
-\setfont\textsf\sfshape{10}{\mainmagstep}
-\setfont\textsc\scshape{10}{\mainmagstep}
-\setfont\textttsl\ttslshape{10}{\mainmagstep}
-\font\texti=cmmi10 scaled \mainmagstep
-\font\textsy=cmsy10 scaled \mainmagstep
-
-% A few fonts for @defun, etc.
-\setfont\defbf\bxshape{10}{\magstep1} %was 1314
-\setfont\deftt\ttshape{10}{\magstep1}
-\def\df{\let\tentt=\deftt \let\tenbf = \defbf \bf}
-
-% Fonts for indices and small examples (9pt).
-% We actually use the slanted font rather than the italic,
-% because texinfo normally uses the slanted fonts for that.
-% Do not make many font distinctions in general in the index, since they
-% aren't very useful.
-\setfont\ninett\ttshape{9}{1000}
-\setfont\ninettsl\ttslshape{10}{900}
-\setfont\indrm\rmshape{9}{1000}
-\setfont\indit\itshape{9}{1000}
-\setfont\indsl\slshape{9}{1000}
-\let\indtt=\ninett
-\let\indttsl=\ninettsl
-\let\indsf=\indrm
-\let\indbf=\indrm
-\setfont\indsc\scshape{10}{900}
-\font\indi=cmmi9
-\font\indsy=cmsy9
-
-% Fonts for title page:
-\setfont\titlerm\rmbshape{12}{\magstep3}
-\setfont\titleit\itbshape{10}{\magstep4}
-\setfont\titlesl\slbshape{10}{\magstep4}
-\setfont\titlett\ttbshape{12}{\magstep3}
-\setfont\titlettsl\ttslshape{10}{\magstep4}
-\setfont\titlesf\sfbshape{17}{\magstep1}
-\let\titlebf=\titlerm
-\setfont\titlesc\scbshape{10}{\magstep4}
-\font\titlei=cmmi12 scaled \magstep3
-\font\titlesy=cmsy10 scaled \magstep4
-\def\authorrm{\secrm}
-
-% Chapter (and unnumbered) fonts (17.28pt).
-\setfont\chaprm\rmbshape{12}{\magstep2}
-\setfont\chapit\itbshape{10}{\magstep3}
-\setfont\chapsl\slbshape{10}{\magstep3}
-\setfont\chaptt\ttbshape{12}{\magstep2}
-\setfont\chapttsl\ttslshape{10}{\magstep3}
-\setfont\chapsf\sfbshape{17}{1000}
-\let\chapbf=\chaprm
-\setfont\chapsc\scbshape{10}{\magstep3}
-\font\chapi=cmmi12 scaled \magstep2
-\font\chapsy=cmsy10 scaled \magstep3
-
-% Section fonts (14.4pt).
-\setfont\secrm\rmbshape{12}{\magstep1}
-\setfont\secit\itbshape{10}{\magstep2}
-\setfont\secsl\slbshape{10}{\magstep2}
-\setfont\sectt\ttbshape{12}{\magstep1}
-\setfont\secttsl\ttslshape{10}{\magstep2}
-\setfont\secsf\sfbshape{12}{\magstep1}
-\let\secbf\secrm
-\setfont\secsc\scbshape{10}{\magstep2}
-\font\seci=cmmi12 scaled \magstep1
-\font\secsy=cmsy10 scaled \magstep2
-
-% \setfont\ssecrm\bxshape{10}{\magstep1} % This size an font looked bad.
-% \setfont\ssecit\itshape{10}{\magstep1} % The letters were too crowded.
-% \setfont\ssecsl\slshape{10}{\magstep1}
-% \setfont\ssectt\ttshape{10}{\magstep1}
-% \setfont\ssecsf\sfshape{10}{\magstep1}
-
-%\setfont\ssecrm\bfshape{10}{1315} % Note the use of cmb rather than cmbx.
-%\setfont\ssecit\itshape{10}{1315} % Also, the size is a little larger than
-%\setfont\ssecsl\slshape{10}{1315} % being scaled magstep1.
-%\setfont\ssectt\ttshape{10}{1315}
-%\setfont\ssecsf\sfshape{10}{1315}
-
-%\let\ssecbf=\ssecrm
-
-% Subsection fonts (13.15pt).
-\setfont\ssecrm\rmbshape{12}{\magstephalf}
-\setfont\ssecit\itbshape{10}{1315}
-\setfont\ssecsl\slbshape{10}{1315}
-\setfont\ssectt\ttbshape{12}{\magstephalf}
-\setfont\ssecttsl\ttslshape{10}{1315}
-\setfont\ssecsf\sfbshape{12}{\magstephalf}
-\let\ssecbf\ssecrm
-\setfont\ssecsc\scbshape{10}{\magstep1}
-\font\sseci=cmmi12 scaled \magstephalf
-\font\ssecsy=cmsy10 scaled 1315
-% The smallcaps and symbol fonts should actually be scaled \magstep1.5,
-% but that is not a standard magnification.
-
-% In order for the font changes to affect most math symbols and letters,
-% we have to define the \textfont of the standard families. Since
-% texinfo doesn't allow for producing subscripts and superscripts, we
-% don't bother to reset \scriptfont and \scriptscriptfont (which would
-% also require loading a lot more fonts).
-%
-\def\resetmathfonts{%
- \textfont0 = \tenrm \textfont1 = \teni \textfont2 = \tensy
- \textfont\itfam = \tenit \textfont\slfam = \tensl \textfont\bffam = \tenbf
- \textfont\ttfam = \tentt \textfont\sffam = \tensf
-}
-
-
-% The font-changing commands redefine the meanings of \tenSTYLE, instead
-% of just \STYLE. We do this so that font changes will continue to work
-% in math mode, where it is the current \fam that is relevant in most
-% cases, not the current font. Plain TeX does \def\bf{\fam=\bffam
-% \tenbf}, for example. By redefining \tenbf, we obviate the need to
-% redefine \bf itself.
-\def\textfonts{%
- \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl
- \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc
- \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy \let\tenttsl=\textttsl
- \resetmathfonts}
-\def\titlefonts{%
- \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl
- \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc
- \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy
- \let\tenttsl=\titlettsl
- \resetmathfonts \setleading{25pt}}
-\def\titlefont#1{{\titlefonts\rm #1}}
-\def\chapfonts{%
- \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
- \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
- \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy \let\tenttsl=\chapttsl
- \resetmathfonts \setleading{19pt}}
-\def\secfonts{%
- \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl
- \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc
- \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy \let\tenttsl=\secttsl
- \resetmathfonts \setleading{16pt}}
-\def\subsecfonts{%
- \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl
- \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc
- \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy \let\tenttsl=\ssecttsl
- \resetmathfonts \setleading{15pt}}
-\let\subsubsecfonts = \subsecfonts % Maybe make sssec fonts scaled magstephalf?
-\def\indexfonts{%
- \let\tenrm=\indrm \let\tenit=\indit \let\tensl=\indsl
- \let\tenbf=\indbf \let\tentt=\indtt \let\smallcaps=\indsc
- \let\tensf=\indsf \let\teni=\indi \let\tensy=\indsy \let\tenttsl=\indttsl
- \resetmathfonts \setleading{12pt}}
-
-% Set up the default fonts, so we can use them for creating boxes.
-%
-\textfonts
-
-% Define these so they can be easily changed for other fonts.
-\def\angleleft{$\langle$}
-\def\angleright{$\rangle$}
-
-% Count depth in font-changes, for error checks
-\newcount\fontdepth \fontdepth=0
-
-% Fonts for short table of contents.
-\setfont\shortcontrm\rmshape{12}{1000}
-\setfont\shortcontbf\bxshape{12}{1000}
-\setfont\shortcontsl\slshape{12}{1000}
-
-%% Add scribe-like font environments, plus @l for inline lisp (usually sans
-%% serif) and @ii for TeX italic
-
-% \smartitalic{ARG} outputs arg in italics, followed by an italic correction
-% unless the following character is such as not to need one.
-\def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else\/\fi\fi\fi}
-\def\smartslanted#1{{\sl #1}\futurelet\next\smartitalicx}
-\def\smartitalic#1{{\it #1}\futurelet\next\smartitalicx}
-
-\let\i=\smartitalic
-\let\var=\smartslanted
-\let\dfn=\smartslanted
-\let\emph=\smartitalic
-\let\cite=\smartslanted
-
-\def\b#1{{\bf #1}}
-\let\strong=\b
-
-% We can't just use \exhyphenpenalty, because that only has effect at
-% the end of a paragraph. Restore normal hyphenation at the end of the
-% group within which \nohyphenation is presumably called.
-%
-\def\nohyphenation{\hyphenchar\font = -1 \aftergroup\restorehyphenation}
-\def\restorehyphenation{\hyphenchar\font = `- }
-
-\def\t#1{%
- {\tt \rawbackslash \frenchspacing #1}%
- \null
-}
-\let\ttfont=\t
-\def\samp#1{`\tclose{#1}'\null}
-\setfont\smallrm\rmshape{8}{1000}
-\font\smallsy=cmsy9
-\def\key#1{{\smallrm\textfont2=\smallsy \leavevmode\hbox{%
- \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
- \vbox{\hrule\kern-0.4pt
- \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
- \kern-0.4pt\hrule}%
- \kern-.06em\raise0.4pt\hbox{\angleright}}}}
-% The old definition, with no lozenge:
-%\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null}
-\def\ctrl #1{{\tt \rawbackslash \hat}#1}
-
-% @file, @option are the same as @samp.
-\let\file=\samp
-\let\option=\samp
-
-% @code is a modification of @t,
-% which makes spaces the same size as normal in the surrounding text.
-\def\tclose#1{%
- {%
- % Change normal interword space to be same as for the current font.
- \spaceskip = \fontdimen2\font
- %
- % Switch to typewriter.
- \tt
- %
- % But `\ ' produces the large typewriter interword space.
- \def\ {{\spaceskip = 0pt{} }}%
- %
- % Turn off hyphenation.
- \nohyphenation
- %
- \rawbackslash
- \frenchspacing
- #1%
- }%
- \null
-}
-
-% We *must* turn on hyphenation at `-' and `_' in \code.
-% Otherwise, it is too hard to avoid overfull hboxes
-% in the Emacs manual, the Library manual, etc.
-
-% Unfortunately, TeX uses one parameter (\hyphenchar) to control
-% both hyphenation at - and hyphenation within words.
-% We must therefore turn them both off (\tclose does that)
-% and arrange explicitly to hyphenate at a dash.
-% -- rms.
-{
- \catcode`\-=\active
- \catcode`\_=\active
- %
- \global\def\code{\begingroup
- \catcode`\-=\active \let-\codedash
- \catcode`\_=\active \let_\codeunder
- \codex
- }
- %
- % If we end up with any active - characters when handling the index,
- % just treat them as a normal -.
- \global\def\indexbreaks{\catcode`\-=\active \let-\realdash}
-}
-
-\def\realdash{-}
-\def\codedash{-\discretionary{}{}{}}
-\def\codeunder{\ifusingtt{\normalunderscore\discretionary{}{}{}}{\_}}
-\def\codex #1{\tclose{#1}\endgroup}
-
-%\let\exp=\tclose %Was temporary
-
-% @kbd is like @code, except that if the argument is just one @key command,
-% then @kbd has no effect.
-
-% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
-% `example' (@kbd uses ttsl only inside of @example and friends),
-% or `code' (@kbd uses normal tty font always).
-\def\kbdinputstyle{\parsearg\kbdinputstylexxx}
-\def\kbdinputstylexxx#1{%
- \def\arg{#1}%
- \ifx\arg\worddistinct
- \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}%
- \else\ifx\arg\wordexample
- \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}%
- \else\ifx\arg\wordcode
- \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}%
- \fi\fi\fi
-}
-\def\worddistinct{distinct}
-\def\wordexample{example}
-\def\wordcode{code}
-
-% Default is kbdinputdistinct. (Too much of a hassle to call the macro,
-% the catcodes are wrong for parsearg to work.)
-\gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}
-
-\def\xkey{\key}
-\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}%
-\ifx\one\xkey\ifx\threex\three \key{#2}%
-\else{\tclose{\kbdfont\look}}\fi
-\else{\tclose{\kbdfont\look}}\fi}
-
-% For @url, @env, @command quotes seem unnecessary, so use \code.
-\let\url=\code
-\let\env=\code
-\let\command=\code
-
-% @uref (abbreviation for `urlref') takes an optional second argument
-% specifying the text to display. First (mandatory) arg is the url.
-% Perhaps eventually put in a hypertex \special here.
-%
-\def\uref#1{\urefxxx #1,,\finish}
-\def\urefxxx#1,#2,#3\finish{%
- \setbox0 = \hbox{\ignorespaces #2}%
- \ifdim\wd0 > 0pt
- \unhbox0\ (\code{#1})%
- \else
- \code{#1}%
- \fi
-}
-
-% rms does not like the angle brackets --karl, 17may97.
-% So now @email is just like @uref.
-%\def\email#1{\angleleft{\tt #1}\angleright}
-\let\email=\uref
-
-% Check if we are currently using a typewriter font. Since all the
-% Computer Modern typewriter fonts have zero interword stretch (and
-% shrink), and it is reasonable to expect all typewriter fonts to have
-% this property, we can check that font parameter.
-%
-\def\ifmonospace{\ifdim\fontdimen3\font=0pt }
-
-% Typeset a dimension, e.g., `in' or `pt'. The only reason for the
-% argument is to make the input look right: @dmn{pt} instead of @dmn{}pt.
-%
-\def\dmn#1{\thinspace #1}
-
-\def\kbd#1{\def\look{#1}\expandafter\kbdfoo\look??\par}
-
-% @l was never documented to mean ``switch to the Lisp font'',
-% and it is not used as such in any manual I can find. We need it for
-% Polish suppressed-l. --karl, 22sep96.
-%\def\l#1{{\li #1}\null}
-
-% Explicit font changes: @r, @sc, undocumented @ii.
-\def\r#1{{\rm #1}} % roman font
-\def\sc#1{{\smallcaps#1}} % smallcaps font
-\def\ii#1{{\it #1}} % italic font
-
-% @acronym downcases the argument and prints in smallcaps.
-\def\acronym#1{{\smallcaps \lowercase{#1}}}
-
-% @pounds{} is a sterling sign.
-\def\pounds{{\it\$}}
-
-
-\message{page headings,}
-
-\newskip\titlepagetopglue \titlepagetopglue = 1.5in
-\newskip\titlepagebottomglue \titlepagebottomglue = 2pc
-
-% First the title page. Must do @settitle before @titlepage.
-\newif\ifseenauthor
-\newif\iffinishedtitlepage
-
-% Do an implicit @contents or @shortcontents after @end titlepage if the
-% user says @contentsaftertitlepage or @shortcontentsaftertitlepage.
-%
-\newif\ifsetcontentsaftertitlepage
- \let\setcontentsaftertitlepage = \setcontentsaftertitlepagetrue
-\newif\ifsetshortcontentsaftertitlepage
- \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue
-
-\def\shorttitlepage{\parsearg\shorttitlepagezzz}
-\def\shorttitlepagezzz #1{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}%
- \endgroup\page\hbox{}\page}
-
-\def\titlepage{\begingroup \parindent=0pt \textfonts
- \let\subtitlerm=\tenrm
- \def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}%
- %
- \def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines}%
- %
- % Leave some space at the very top of the page.
- \vglue\titlepagetopglue
- %
- % Now you can print the title using @title.
- \def\title{\parsearg\titlezzz}%
- \def\titlezzz##1{\leftline{\titlefonts\rm ##1}
- % print a rule at the page bottom also.
- \finishedtitlepagefalse
- \vskip4pt \hrule height 4pt width \hsize \vskip4pt}%
- % No rule at page bottom unless we print one at the top with @title.
- \finishedtitlepagetrue
- %
- % Now you can put text using @subtitle.
- \def\subtitle{\parsearg\subtitlezzz}%
- \def\subtitlezzz##1{{\subtitlefont \rightline{##1}}}%
- %
- % @author should come last, but may come many times.
- \def\author{\parsearg\authorzzz}%
- \def\authorzzz##1{\ifseenauthor\else\vskip 0pt plus 1filll\seenauthortrue\fi
- {\authorfont \leftline{##1}}}%
- %
- % Most title ``pages'' are actually two pages long, with space
- % at the top of the second. We don't want the ragged left on the second.
- \let\oldpage = \page
- \def\page{%
- \iffinishedtitlepage\else
- \finishtitlepage
- \fi
- \oldpage
- \let\page = \oldpage
- \hbox{}}%
-% \def\page{\oldpage \hbox{}}
-}
-
-\def\Etitlepage{%
- \iffinishedtitlepage\else
- \finishtitlepage
- \fi
- % It is important to do the page break before ending the group,
- % because the headline and footline are only empty inside the group.
- % If we use the new definition of \page, we always get a blank page
- % after the title page, which we certainly don't want.
- \oldpage
- \endgroup
- %
- % If they want short, they certainly want long too.
- \ifsetshortcontentsaftertitlepage
- \shortcontents
- \contents
- \global\let\shortcontents = \relax
- \global\let\contents = \relax
- \fi
- %
- \ifsetcontentsaftertitlepage
- \contents
- \global\let\contents = \relax
- \global\let\shortcontents = \relax
- \fi
- %
- \HEADINGSon
-}
-
-\def\finishtitlepage{%
- \vskip4pt \hrule height 2pt width \hsize
- \vskip\titlepagebottomglue
- \finishedtitlepagetrue
-}
-
-%%% Set up page headings and footings.
-
-\let\thispage=\folio
-
-\newtoks\evenheadline % headline on even pages
-\newtoks\oddheadline % headline on odd pages
-\newtoks\evenfootline % footline on even pages
-\newtoks\oddfootline % footline on odd pages
-
-% Now make Tex use those variables
-\headline={{\textfonts\rm \ifodd\pageno \the\oddheadline
- \else \the\evenheadline \fi}}
-\footline={{\textfonts\rm \ifodd\pageno \the\oddfootline
- \else \the\evenfootline \fi}\HEADINGShook}
-\let\HEADINGShook=\relax
-
-% Commands to set those variables.
-% For example, this is what @headings on does
-% @evenheading @thistitle|@thispage|@thischapter
-% @oddheading @thischapter|@thispage|@thistitle
-% @evenfooting @thisfile||
-% @oddfooting ||@thisfile
-
-\def\evenheading{\parsearg\evenheadingxxx}
-\def\oddheading{\parsearg\oddheadingxxx}
-\def\everyheading{\parsearg\everyheadingxxx}
-
-\def\evenfooting{\parsearg\evenfootingxxx}
-\def\oddfooting{\parsearg\oddfootingxxx}
-\def\everyfooting{\parsearg\everyfootingxxx}
-
-{\catcode`\@=0 %
-
-\gdef\evenheadingxxx #1{\evenheadingyyy #1@|@|@|@|\finish}
-\gdef\evenheadingyyy #1@|#2@|#3@|#4\finish{%
-\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
-
-\gdef\oddheadingxxx #1{\oddheadingyyy #1@|@|@|@|\finish}
-\gdef\oddheadingyyy #1@|#2@|#3@|#4\finish{%
-\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
-
-\gdef\everyheadingxxx#1{\oddheadingxxx{#1}\evenheadingxxx{#1}}%
-
-\gdef\evenfootingxxx #1{\evenfootingyyy #1@|@|@|@|\finish}
-\gdef\evenfootingyyy #1@|#2@|#3@|#4\finish{%
-\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
-
-\gdef\oddfootingxxx #1{\oddfootingyyy #1@|@|@|@|\finish}
-\gdef\oddfootingyyy #1@|#2@|#3@|#4\finish{%
- \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}%
- %
- % Leave some space for the footline. Hopefully ok to assume
- % @evenfooting will not be used by itself.
- \global\advance\pageheight by -\baselineskip
- \global\advance\vsize by -\baselineskip
-}
-
-\gdef\everyfootingxxx#1{\oddfootingxxx{#1}\evenfootingxxx{#1}}
-%
-}% unbind the catcode of @.
-
-% @headings double turns headings on for double-sided printing.
-% @headings single turns headings on for single-sided printing.
-% @headings off turns them off.
-% @headings on same as @headings double, retained for compatibility.
-% @headings after turns on double-sided headings after this page.
-% @headings doubleafter turns on double-sided headings after this page.
-% @headings singleafter turns on single-sided headings after this page.
-% By default, they are off at the start of a document,
-% and turned `on' after @end titlepage.
-
-\def\headings #1 {\csname HEADINGS#1\endcsname}
-
-\def\HEADINGSoff{
-\global\evenheadline={\hfil} \global\evenfootline={\hfil}
-\global\oddheadline={\hfil} \global\oddfootline={\hfil}}
-\HEADINGSoff
-% When we turn headings on, set the page number to 1.
-% For double-sided printing, put current file name in lower left corner,
-% chapter name on inside top of right hand pages, document
-% title on inside top of left hand pages, and page numbers on outside top
-% edge of all pages.
-\def\HEADINGSdouble{
-\global\pageno=1
-\global\evenfootline={\hfil}
-\global\oddfootline={\hfil}
-\global\evenheadline={\line{\folio\hfil\thistitle}}
-\global\oddheadline={\line{\thischapter\hfil\folio}}
-\global\let\contentsalignmacro = \chapoddpage
-}
-\let\contentsalignmacro = \chappager
-
-% For single-sided printing, chapter title goes across top left of page,
-% page number on top right.
-\def\HEADINGSsingle{
-\global\pageno=1
-\global\evenfootline={\hfil}
-\global\oddfootline={\hfil}
-\global\evenheadline={\line{\thischapter\hfil\folio}}
-\global\oddheadline={\line{\thischapter\hfil\folio}}
-\global\let\contentsalignmacro = \chappager
-}
-\def\HEADINGSon{\HEADINGSdouble}
-
-\def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex}
-\let\HEADINGSdoubleafter=\HEADINGSafter
-\def\HEADINGSdoublex{%
-\global\evenfootline={\hfil}
-\global\oddfootline={\hfil}
-\global\evenheadline={\line{\folio\hfil\thistitle}}
-\global\oddheadline={\line{\thischapter\hfil\folio}}
-\global\let\contentsalignmacro = \chapoddpage
-}
-
-\def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex}
-\def\HEADINGSsinglex{%
-\global\evenfootline={\hfil}
-\global\oddfootline={\hfil}
-\global\evenheadline={\line{\thischapter\hfil\folio}}
-\global\oddheadline={\line{\thischapter\hfil\folio}}
-\global\let\contentsalignmacro = \chappager
-}
-
-% Subroutines used in generating headings
-% Produces Day Month Year style of output.
-\def\today{\number\day\space
-\ifcase\month\or
-January\or February\or March\or April\or May\or June\or
-July\or August\or September\or October\or November\or December\fi
-\space\number\year}
-
-% Use this if you want the Month Day, Year style of output.
-%\def\today{\ifcase\month\or
-%January\or February\or March\or April\or May\or June\or
-%July\or August\or September\or October\or November\or December\fi
-%\space\number\day, \number\year}
-
-% @settitle line... specifies the title of the document, for headings
-% It generates no output of its own
-
-\def\thistitle{No Title}
-\def\settitle{\parsearg\settitlezzz}
-\def\settitlezzz #1{\gdef\thistitle{#1}}
-
-
-\message{tables,}
-% Tables -- @table, @ftable, @vtable, @item(x), @kitem(x), @xitem(x).
-
-% default indentation of table text
-\newdimen\tableindent \tableindent=.8in
-% default indentation of @itemize and @enumerate text
-\newdimen\itemindent \itemindent=.3in
-% margin between end of table item and start of table text.
-\newdimen\itemmargin \itemmargin=.1in
-
-% used internally for \itemindent minus \itemmargin
-\newdimen\itemmax
-
-% Note @table, @vtable, and @vtable define @item, @itemx, etc., with
-% these defs.
-% They also define \itemindex
-% to index the item name in whatever manner is desired (perhaps none).
-
-\newif\ifitemxneedsnegativevskip
-
-\def\itemxpar{\par\ifitemxneedsnegativevskip\nobreak\vskip-\parskip\nobreak\fi}
-
-\def\internalBitem{\smallbreak \parsearg\itemzzz}
-\def\internalBitemx{\itemxpar \parsearg\itemzzz}
-
-\def\internalBxitem "#1"{\def\xitemsubtopix{#1} \smallbreak \parsearg\xitemzzz}
-\def\internalBxitemx "#1"{\def\xitemsubtopix{#1} \itemxpar \parsearg\xitemzzz}
-
-\def\internalBkitem{\smallbreak \parsearg\kitemzzz}
-\def\internalBkitemx{\itemxpar \parsearg\kitemzzz}
-
-\def\kitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \lastfunction}}%
- \itemzzz {#1}}
-
-\def\xitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \xitemsubtopic}}%
- \itemzzz {#1}}
-
-\def\itemzzz #1{\begingroup %
- \advance\hsize by -\rightskip
- \advance\hsize by -\tableindent
- \setbox0=\hbox{\itemfont{#1}}%
- \itemindex{#1}%
- \nobreak % This prevents a break before @itemx.
- %
- % If the item text does not fit in the space we have, put it on a line
- % by itself, and do not allow a page break either before or after that
- % line. We do not start a paragraph here because then if the next
- % command is, e.g., @kindex, the whatsit would get put into the
- % horizontal list on a line by itself, resulting in extra blank space.
- \ifdim \wd0>\itemmax
- %
- % Make this a paragraph so we get the \parskip glue and wrapping,
- % but leave it ragged-right.
- \begingroup
- \advance\leftskip by-\tableindent
- \advance\hsize by\tableindent
- \advance\rightskip by0pt plus1fil
- \leavevmode\unhbox0\par
- \endgroup
- %
- % We're going to be starting a paragraph, but we don't want the
- % \parskip glue -- logically it's part of the @item we just started.
- \nobreak \vskip-\parskip
- %
- % Stop a page break at the \parskip glue coming up. Unfortunately
- % we can't prevent a possible page break at the following
- % \baselineskip glue.
- \nobreak
- \endgroup
- \itemxneedsnegativevskipfalse
- \else
- % The item text fits into the space. Start a paragraph, so that the
- % following text (if any) will end up on the same line.
- \noindent
- % Do this with kerns and \unhbox so that if there is a footnote in
- % the item text, it can migrate to the main vertical list and
- % eventually be printed.
- \nobreak\kern-\tableindent
- \dimen0 = \itemmax \advance\dimen0 by \itemmargin \advance\dimen0 by -\wd0
- \unhbox0
- \nobreak\kern\dimen0
- \endgroup
- \itemxneedsnegativevskiptrue
- \fi
-}
-
-\def\item{\errmessage{@item while not in a table}}
-\def\itemx{\errmessage{@itemx while not in a table}}
-\def\kitem{\errmessage{@kitem while not in a table}}
-\def\kitemx{\errmessage{@kitemx while not in a table}}
-\def\xitem{\errmessage{@xitem while not in a table}}
-\def\xitemx{\errmessage{@xitemx while not in a table}}
-
-% Contains a kludge to get @end[description] to work.
-\def\description{\tablez{\dontindex}{1}{}{}{}{}}
-
-% @table, @ftable, @vtable.
-\def\table{\begingroup\inENV\obeylines\obeyspaces\tablex}
-{\obeylines\obeyspaces%
-\gdef\tablex #1^^M{%
-\tabley\dontindex#1 \endtabley}}
-
-\def\ftable{\begingroup\inENV\obeylines\obeyspaces\ftablex}
-{\obeylines\obeyspaces%
-\gdef\ftablex #1^^M{%
-\tabley\fnitemindex#1 \endtabley
-\def\Eftable{\endgraf\afterenvbreak\endgroup}%
-\let\Etable=\relax}}
-
-\def\vtable{\begingroup\inENV\obeylines\obeyspaces\vtablex}
-{\obeylines\obeyspaces%
-\gdef\vtablex #1^^M{%
-\tabley\vritemindex#1 \endtabley
-\def\Evtable{\endgraf\afterenvbreak\endgroup}%
-\let\Etable=\relax}}
-
-\def\dontindex #1{}
-\def\fnitemindex #1{\doind {fn}{\code{#1}}}%
-\def\vritemindex #1{\doind {vr}{\code{#1}}}%
-
-{\obeyspaces %
-\gdef\tabley#1#2 #3 #4 #5 #6 #7\endtabley{\endgroup%
-\tablez{#1}{#2}{#3}{#4}{#5}{#6}}}
-
-\def\tablez #1#2#3#4#5#6{%
-\aboveenvbreak %
-\begingroup %
-\def\Edescription{\Etable}% Necessary kludge.
-\let\itemindex=#1%
-\ifnum 0#3>0 \advance \leftskip by #3\mil \fi %
-\ifnum 0#4>0 \tableindent=#4\mil \fi %
-\ifnum 0#5>0 \advance \rightskip by #5\mil \fi %
-\def\itemfont{#2}%
-\itemmax=\tableindent %
-\advance \itemmax by -\itemmargin %
-\advance \leftskip by \tableindent %
-\exdentamount=\tableindent
-\parindent = 0pt
-\parskip = \smallskipamount
-\ifdim \parskip=0pt \parskip=2pt \fi%
-\def\Etable{\endgraf\afterenvbreak\endgroup}%
-\let\item = \internalBitem %
-\let\itemx = \internalBitemx %
-\let\kitem = \internalBkitem %
-\let\kitemx = \internalBkitemx %
-\let\xitem = \internalBxitem %
-\let\xitemx = \internalBxitemx %
-}
-
-% This is the counter used by @enumerate, which is really @itemize
-
-\newcount \itemno
-
-\def\itemize{\parsearg\itemizezzz}
-
-\def\itemizezzz #1{%
- \begingroup % ended by the @end itemize
- \itemizey {#1}{\Eitemize}
-}
-
-\def\itemizey #1#2{%
-\aboveenvbreak %
-\itemmax=\itemindent %
-\advance \itemmax by -\itemmargin %
-\advance \leftskip by \itemindent %
-\exdentamount=\itemindent
-\parindent = 0pt %
-\parskip = \smallskipamount %
-\ifdim \parskip=0pt \parskip=2pt \fi%
-\def#2{\endgraf\afterenvbreak\endgroup}%
-\def\itemcontents{#1}%
-\let\item=\itemizeitem}
-
-% Set sfcode to normal for the chars that usually have another value.
-% These are `.?!:;,'
-\def\frenchspacing{\sfcode46=1000 \sfcode63=1000 \sfcode33=1000
- \sfcode58=1000 \sfcode59=1000 \sfcode44=1000 }
-
-% \splitoff TOKENS\endmark defines \first to be the first token in
-% TOKENS, and \rest to be the remainder.
-%
-\def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}%
-
-% Allow an optional argument of an uppercase letter, lowercase letter,
-% or number, to specify the first label in the enumerated list. No
-% argument is the same as `1'.
-%
-\def\enumerate{\parsearg\enumeratezzz}
-\def\enumeratezzz #1{\enumeratey #1 \endenumeratey}
-\def\enumeratey #1 #2\endenumeratey{%
- \begingroup % ended by the @end enumerate
- %
- % If we were given no argument, pretend we were given `1'.
- \def\thearg{#1}%
- \ifx\thearg\empty \def\thearg{1}\fi
- %
- % Detect if the argument is a single token. If so, it might be a
- % letter. Otherwise, the only valid thing it can be is a number.
- % (We will always have one token, because of the test we just made.
- % This is a good thing, since \splitoff doesn't work given nothing at
- % all -- the first parameter is undelimited.)
- \expandafter\splitoff\thearg\endmark
- \ifx\rest\empty
- % Only one token in the argument. It could still be anything.
- % A ``lowercase letter'' is one whose \lccode is nonzero.
- % An ``uppercase letter'' is one whose \lccode is both nonzero, and
- % not equal to itself.
- % Otherwise, we assume it's a number.
- %
- % We need the \relax at the end of the \ifnum lines to stop TeX from
- % continuing to look for a <number>.
- %
- \ifnum\lccode\expandafter`\thearg=0\relax
- \numericenumerate % a number (we hope)
- \else
- % It's a letter.
- \ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax
- \lowercaseenumerate % lowercase letter
- \else
- \uppercaseenumerate % uppercase letter
- \fi
- \fi
- \else
- % Multiple tokens in the argument. We hope it's a number.
- \numericenumerate
- \fi
-}
-
-% An @enumerate whose labels are integers. The starting integer is
-% given in \thearg.
-%
-\def\numericenumerate{%
- \itemno = \thearg
- \startenumeration{\the\itemno}%
-}
-
-% The starting (lowercase) letter is in \thearg.
-\def\lowercaseenumerate{%
- \itemno = \expandafter`\thearg
- \startenumeration{%
- % Be sure we're not beyond the end of the alphabet.
- \ifnum\itemno=0
- \errmessage{No more lowercase letters in @enumerate; get a bigger
- alphabet}%
- \fi
- \char\lccode\itemno
- }%
-}
-
-% The starting (uppercase) letter is in \thearg.
-\def\uppercaseenumerate{%
- \itemno = \expandafter`\thearg
- \startenumeration{%
- % Be sure we're not beyond the end of the alphabet.
- \ifnum\itemno=0
- \errmessage{No more uppercase letters in @enumerate; get a bigger
- alphabet}
- \fi
- \char\uccode\itemno
- }%
-}
-
-% Call itemizey, adding a period to the first argument and supplying the
-% common last two arguments. Also subtract one from the initial value in
-% \itemno, since @item increments \itemno.
-%
-\def\startenumeration#1{%
- \advance\itemno by -1
- \itemizey{#1.}\Eenumerate\flushcr
-}
-
-% @alphaenumerate and @capsenumerate are abbreviations for giving an arg
-% to @enumerate.
-%
-\def\alphaenumerate{\enumerate{a}}
-\def\capsenumerate{\enumerate{A}}
-\def\Ealphaenumerate{\Eenumerate}
-\def\Ecapsenumerate{\Eenumerate}
-
-% Definition of @item while inside @itemize.
-
-\def\itemizeitem{%
-\advance\itemno by 1
-{\let\par=\endgraf \smallbreak}%
-\ifhmode \errmessage{In hmode at itemizeitem}\fi
-{\parskip=0in \hskip 0pt
-\hbox to 0pt{\hss \itemcontents\hskip \itemmargin}%
-\vadjust{\penalty 1200}}%
-\flushcr}
-
-% @multitable macros
-% Amy Hendrickson, 8/18/94, 3/6/96
-%
-% @multitable ... @end multitable will make as many columns as desired.
-% Contents of each column will wrap at width given in preamble. Width
-% can be specified either with sample text given in a template line,
-% or in percent of \hsize, the current width of text on page.
-
-% Table can continue over pages but will only break between lines.
-
-% To make preamble:
-%
-% Either define widths of columns in terms of percent of \hsize:
-% @multitable @columnfractions .25 .3 .45
-% @item ...
-%
-% Numbers following @columnfractions are the percent of the total
-% current hsize to be used for each column. You may use as many
-% columns as desired.
-
-
-% Or use a template:
-% @multitable {Column 1 template} {Column 2 template} {Column 3 template}
-% @item ...
-% using the widest term desired in each column.
-%
-% For those who want to use more than one line's worth of words in
-% the preamble, break the line within one argument and it
-% will parse correctly, i.e.,
-%
-% @multitable {Column 1 template} {Column 2 template} {Column 3
-% template}
-% Not:
-% @multitable {Column 1 template} {Column 2 template}
-% {Column 3 template}
-
-% Each new table line starts with @item, each subsequent new column
-% starts with @tab. Empty columns may be produced by supplying @tab's
-% with nothing between them for as many times as empty columns are needed,
-% ie, @tab@tab@tab will produce two empty columns.
-
-% @item, @tab, @multitable or @end multitable do not need to be on their
-% own lines, but it will not hurt if they are.
-
-% Sample multitable:
-
-% @multitable {Column 1 template} {Column 2 template} {Column 3 template}
-% @item first col stuff @tab second col stuff @tab third col
-% @item
-% first col stuff
-% @tab
-% second col stuff
-% @tab
-% third col
-% @item first col stuff @tab second col stuff
-% @tab Many paragraphs of text may be used in any column.
-%
-% They will wrap at the width determined by the template.
-% @item@tab@tab This will be in third column.
-% @end multitable
-
-% Default dimensions may be reset by user.
-% @multitableparskip is vertical space between paragraphs in table.
-% @multitableparindent is paragraph indent in table.
-% @multitablecolmargin is horizontal space to be left between columns.
-% @multitablelinespace is space to leave between table items, baseline
-% to baseline.
-% 0pt means it depends on current normal line spacing.
-%
-\newskip\multitableparskip
-\newskip\multitableparindent
-\newdimen\multitablecolspace
-\newskip\multitablelinespace
-\multitableparskip=0pt
-\multitableparindent=6pt
-\multitablecolspace=12pt
-\multitablelinespace=0pt
-
-% Macros used to set up halign preamble:
-%
-\let\endsetuptable\relax
-\def\xendsetuptable{\endsetuptable}
-\let\columnfractions\relax
-\def\xcolumnfractions{\columnfractions}
-\newif\ifsetpercent
-
-% 2/1/96, to allow fractions to be given with more than one digit.
-\def\pickupwholefraction#1 {\global\advance\colcount by1 %
-\expandafter\xdef\csname col\the\colcount\endcsname{.#1\hsize}%
-\setuptable}
-
-\newcount\colcount
-\def\setuptable#1{\def\firstarg{#1}%
-\ifx\firstarg\xendsetuptable\let\go\relax%
-\else
- \ifx\firstarg\xcolumnfractions\global\setpercenttrue%
- \else
- \ifsetpercent
- \let\go\pickupwholefraction % In this case arg of setuptable
- % is the decimal point before the
- % number given in percent of hsize.
- % We don't need this so we don't use it.
- \else
- \global\advance\colcount by1
- \setbox0=\hbox{#1 }% Add a normal word space as a separator;
- % typically that is always in the input, anyway.
- \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}%
- \fi%
- \fi%
-\ifx\go\pickupwholefraction\else\let\go\setuptable\fi%
-\fi\go}
-
-% multitable syntax
-\def\tab{&\hskip1sp\relax} % 2/2/96
- % tiny skip here makes sure this column space is
- % maintained, even if it is never used.
-
-% @multitable ... @end multitable definitions:
-
-\def\multitable{\parsearg\dotable}
-\def\dotable#1{\bgroup
- \vskip\parskip
- \let\item\crcr
- \tolerance=9500
- \hbadness=9500
- \setmultitablespacing
- \parskip=\multitableparskip
- \parindent=\multitableparindent
- \overfullrule=0pt
- \global\colcount=0
- \def\Emultitable{\global\setpercentfalse\cr\egroup\egroup}%
- %
- % To parse everything between @multitable and @item:
- \setuptable#1 \endsetuptable
- %
- % \everycr will reset column counter, \colcount, at the end of
- % each line. Every column entry will cause \colcount to advance by one.
- % The table preamble
- % looks at the current \colcount to find the correct column width.
- \everycr{\noalign{%
- %
- % \filbreak%% keeps underfull box messages off when table breaks over pages.
- % Maybe so, but it also creates really weird page breaks when the table
- % breaks over pages. Wouldn't \vfil be better? Wait until the problem
- % manifests itself, so it can be fixed for real --karl.
- \global\colcount=0\relax}}%
- %
- % This preamble sets up a generic column definition, which will
- % be used as many times as user calls for columns.
- % \vtop will set a single line and will also let text wrap and
- % continue for many paragraphs if desired.
- \halign\bgroup&\global\advance\colcount by 1\relax
- \multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname
- %
- % In order to keep entries from bumping into each other
- % we will add a \leftskip of \multitablecolspace to all columns after
- % the first one.
- %
- % If a template has been used, we will add \multitablecolspace
- % to the width of each template entry.
- %
- % If the user has set preamble in terms of percent of \hsize we will
- % use that dimension as the width of the column, and the \leftskip
- % will keep entries from bumping into each other. Table will start at
- % left margin and final column will justify at right margin.
- %
- % Make sure we don't inherit \rightskip from the outer environment.
- \rightskip=0pt
- \ifnum\colcount=1
- % The first column will be indented with the surrounding text.
- \advance\hsize by\leftskip
- \else
- \ifsetpercent \else
- % If user has not set preamble in terms of percent of \hsize
- % we will advance \hsize by \multitablecolspace.
- \advance\hsize by \multitablecolspace
- \fi
- % In either case we will make \leftskip=\multitablecolspace:
- \leftskip=\multitablecolspace
- \fi
- % Ignoring space at the beginning and end avoids an occasional spurious
- % blank line, when TeX decides to break the line at the space before the
- % box from the multistrut, so the strut ends up on a line by itself.
- % For example:
- % @multitable @columnfractions .11 .89
- % @item @code{#}
- % @tab Legal holiday which is valid in major parts of the whole country.
- % Is automatically provided with highlighting sequences respectively marking
- % characters.
- \noindent\ignorespaces##\unskip\multistrut}\cr
-}
-
-\def\setmultitablespacing{% test to see if user has set \multitablelinespace.
-% If so, do nothing. If not, give it an appropriate dimension based on
-% current baselineskip.
-\ifdim\multitablelinespace=0pt
-%% strut to put in table in case some entry doesn't have descenders,
-%% to keep lines equally spaced
-\let\multistrut = \strut
-%% Test to see if parskip is larger than space between lines of
-%% table. If not, do nothing.
-%% If so, set to same dimension as multitablelinespace.
-\else
-\gdef\multistrut{\vrule height\multitablelinespace depth\dp0
-width0pt\relax} \fi
-\ifdim\multitableparskip>\multitablelinespace
-\global\multitableparskip=\multitablelinespace
-\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
- %% than skip between lines in the table.
-\fi%
-\ifdim\multitableparskip=0pt
-\global\multitableparskip=\multitablelinespace
-\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller
- %% than skip between lines in the table.
-\fi}
-
-
-\message{indexing,}
-% Index generation facilities
-
-% Define \newwrite to be identical to plain tex's \newwrite
-% except not \outer, so it can be used within \newindex.
-{\catcode`\@=11
-\gdef\newwrite{\alloc@7\write\chardef\sixt@@n}}
-
-% \newindex {foo} defines an index named foo.
-% It automatically defines \fooindex such that
-% \fooindex ...rest of line... puts an entry in the index foo.
-% It also defines \fooindfile to be the number of the output channel for
-% the file that accumulates this index. The file's extension is foo.
-% The name of an index should be no more than 2 characters long
-% for the sake of vms.
-%
-\def\newindex#1{%
- \iflinks
- \expandafter\newwrite \csname#1indfile\endcsname
- \openout \csname#1indfile\endcsname \jobname.#1 % Open the file
- \fi
- \expandafter\xdef\csname#1index\endcsname{% % Define @#1index
- \noexpand\doindex{#1}}
-}
-
-% @defindex foo == \newindex{foo}
-
-\def\defindex{\parsearg\newindex}
-
-% Define @defcodeindex, like @defindex except put all entries in @code.
-
-\def\newcodeindex#1{%
- \iflinks
- \expandafter\newwrite \csname#1indfile\endcsname
- \openout \csname#1indfile\endcsname \jobname.#1
- \fi
- \expandafter\xdef\csname#1index\endcsname{%
- \noexpand\docodeindex{#1}}
-}
-
-\def\defcodeindex{\parsearg\newcodeindex}
-
-% @synindex foo bar makes index foo feed into index bar.
-% Do this instead of @defindex foo if you don't want it as a separate index.
-% The \closeout helps reduce unnecessary open files; the limit on the
-% Acorn RISC OS is a mere 16 files.
-\def\synindex#1 #2 {%
- \expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname
- \expandafter\closeout\csname#1indfile\endcsname
- \expandafter\let\csname#1indfile\endcsname=\synindexfoo
- \expandafter\xdef\csname#1index\endcsname{% define \xxxindex
- \noexpand\doindex{#2}}%
-}
-
-% @syncodeindex foo bar similar, but put all entries made for index foo
-% inside @code.
-\def\syncodeindex#1 #2 {%
- \expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname
- \expandafter\closeout\csname#1indfile\endcsname
- \expandafter\let\csname#1indfile\endcsname=\synindexfoo
- \expandafter\xdef\csname#1index\endcsname{% define \xxxindex
- \noexpand\docodeindex{#2}}%
-}
-
-% Define \doindex, the driver for all \fooindex macros.
-% Argument #1 is generated by the calling \fooindex macro,
-% and it is "foo", the name of the index.
-
-% \doindex just uses \parsearg; it calls \doind for the actual work.
-% This is because \doind is more useful to call from other macros.
-
-% There is also \dosubind {index}{topic}{subtopic}
-% which makes an entry in a two-level index such as the operation index.
-
-\def\doindex#1{\edef\indexname{#1}\parsearg\singleindexer}
-\def\singleindexer #1{\doind{\indexname}{#1}}
-
-% like the previous two, but they put @code around the argument.
-\def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer}
-\def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}}
-
-\def\indexdummies{%
-\def\ { }%
-% Take care of the plain tex accent commands.
-\def\"{\realbackslash "}%
-\def\`{\realbackslash `}%
-\def\'{\realbackslash '}%
-\def\^{\realbackslash ^}%
-\def\~{\realbackslash ~}%
-\def\={\realbackslash =}%
-\def\b{\realbackslash b}%
-\def\c{\realbackslash c}%
-\def\d{\realbackslash d}%
-\def\u{\realbackslash u}%
-\def\v{\realbackslash v}%
-\def\H{\realbackslash H}%
-% Take care of the plain tex special European modified letters.
-\def\oe{\realbackslash oe}%
-\def\ae{\realbackslash ae}%
-\def\aa{\realbackslash aa}%
-\def\OE{\realbackslash OE}%
-\def\AE{\realbackslash AE}%
-\def\AA{\realbackslash AA}%
-\def\o{\realbackslash o}%
-\def\O{\realbackslash O}%
-\def\l{\realbackslash l}%
-\def\L{\realbackslash L}%
-\def\ss{\realbackslash ss}%
-% Take care of texinfo commands likely to appear in an index entry.
-% (Must be a way to avoid doing expansion at all, and thus not have to
-% laboriously list every single command here.)
-\def\@{@}% will be @@ when we switch to @ as escape char.
-%\let\{ = \lbracecmd
-%\let\} = \rbracecmd
-\def\_{{\realbackslash _}}%
-\def\w{\realbackslash w }%
-\def\bf{\realbackslash bf }%
-%\def\rm{\realbackslash rm }%
-\def\sl{\realbackslash sl }%
-\def\sf{\realbackslash sf}%
-\def\tt{\realbackslash tt}%
-\def\gtr{\realbackslash gtr}%
-\def\less{\realbackslash less}%
-\def\hat{\realbackslash hat}%
-\def\TeX{\realbackslash TeX}%
-\def\dots{\realbackslash dots }%
-\def\result{\realbackslash result}%
-\def\equiv{\realbackslash equiv}%
-\def\expansion{\realbackslash expansion}%
-\def\print{\realbackslash print}%
-\def\error{\realbackslash error}%
-\def\point{\realbackslash point}%
-\def\copyright{\realbackslash copyright}%
-\def\tclose##1{\realbackslash tclose {##1}}%
-\def\code##1{\realbackslash code {##1}}%
-\def\uref##1{\realbackslash uref {##1}}%
-\def\url##1{\realbackslash url {##1}}%
-\def\env##1{\realbackslash env {##1}}%
-\def\command##1{\realbackslash command {##1}}%
-\def\option##1{\realbackslash option {##1}}%
-\def\dotless##1{\realbackslash dotless {##1}}%
-\def\samp##1{\realbackslash samp {##1}}%
-\def\,##1{\realbackslash ,{##1}}%
-\def\t##1{\realbackslash t {##1}}%
-\def\r##1{\realbackslash r {##1}}%
-\def\i##1{\realbackslash i {##1}}%
-\def\b##1{\realbackslash b {##1}}%
-\def\sc##1{\realbackslash sc {##1}}%
-\def\cite##1{\realbackslash cite {##1}}%
-\def\key##1{\realbackslash key {##1}}%
-\def\file##1{\realbackslash file {##1}}%
-\def\var##1{\realbackslash var {##1}}%
-\def\kbd##1{\realbackslash kbd {##1}}%
-\def\dfn##1{\realbackslash dfn {##1}}%
-\def\emph##1{\realbackslash emph {##1}}%
-\def\acronym##1{\realbackslash acronym {##1}}%
-%
-% Handle some cases of @value -- where the variable name does not
-% contain - or _, and the value does not contain any
-% (non-fully-expandable) commands.
-\let\value = \expandablevalue
-%
-\unsepspaces
-}
-
-% If an index command is used in an @example environment, any spaces
-% therein should become regular spaces in the raw index file, not the
-% expansion of \tie (\\leavevmode \penalty \@M \ ).
-{\obeyspaces
- \gdef\unsepspaces{\obeyspaces\let =\space}}
-
-% \indexnofonts no-ops all font-change commands.
-% This is used when outputting the strings to sort the index by.
-\def\indexdummyfont#1{#1}
-\def\indexdummytex{TeX}
-\def\indexdummydots{...}
-
-\def\indexnofonts{%
-% Just ignore accents.
-\let\,=\indexdummyfont
-\let\"=\indexdummyfont
-\let\`=\indexdummyfont
-\let\'=\indexdummyfont
-\let\^=\indexdummyfont
-\let\~=\indexdummyfont
-\let\==\indexdummyfont
-\let\b=\indexdummyfont
-\let\c=\indexdummyfont
-\let\d=\indexdummyfont
-\let\u=\indexdummyfont
-\let\v=\indexdummyfont
-\let\H=\indexdummyfont
-\let\dotless=\indexdummyfont
-% Take care of the plain tex special European modified letters.
-\def\oe{oe}%
-\def\ae{ae}%
-\def\aa{aa}%
-\def\OE{OE}%
-\def\AE{AE}%
-\def\AA{AA}%
-\def\o{o}%
-\def\O{O}%
-\def\l{l}%
-\def\L{L}%
-\def\ss{ss}%
-\let\w=\indexdummyfont
-\let\t=\indexdummyfont
-\let\r=\indexdummyfont
-\let\i=\indexdummyfont
-\let\b=\indexdummyfont
-\let\emph=\indexdummyfont
-\let\strong=\indexdummyfont
-\let\cite=\indexdummyfont
-\let\sc=\indexdummyfont
-%Don't no-op \tt, since it isn't a user-level command
-% and is used in the definitions of the active chars like <, >, |...
-%\let\tt=\indexdummyfont
-\let\tclose=\indexdummyfont
-\let\code=\indexdummyfont
-\let\url=\indexdummyfont
-\let\uref=\indexdummyfont
-\let\env=\indexdummyfont
-\let\command=\indexdummyfont
-\let\option=\indexdummyfont
-\let\file=\indexdummyfont
-\let\samp=\indexdummyfont
-\let\kbd=\indexdummyfont
-\let\key=\indexdummyfont
-\let\var=\indexdummyfont
-\let\TeX=\indexdummytex
-\let\dots=\indexdummydots
-\def\@{@}%
-}
-
-% To define \realbackslash, we must make \ not be an escape.
-% We must first make another character (@) an escape
-% so we do not become unable to do a definition.
-
-{\catcode`\@=0 \catcode`\\=\other
- @gdef@realbackslash{\}}
-
-\let\indexbackslash=0 %overridden during \printindex.
-\let\SETmarginindex=\relax % put index entries in margin (undocumented)?
-
-% For \ifx comparisons.
-\def\emptymacro{\empty}
-
-% Most index entries go through here, but \dosubind is the general case.
-%
-\def\doind#1#2{\dosubind{#1}{#2}\empty}
-
-% Workhorse for all \fooindexes.
-% #1 is name of index, #2 is stuff to put there, #3 is subentry --
-% \empty if called from \doind, as we usually are. The main exception
-% is with defuns, which call us directly.
-%
-\def\dosubind#1#2#3{%
- % Put the index entry in the margin if desired.
- \ifx\SETmarginindex\relax\else
- \insert\margin{\hbox{\vrule height8pt depth3pt width0pt #2}}%
- \fi
- {%
- \count255=\lastpenalty
- {%
- \indexdummies % Must do this here, since \bf, etc expand at this stage
- \escapechar=`\\
- {%
- \let\folio = 0% We will expand all macros now EXCEPT \folio.
- \def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now
- % so it will be output as is; and it will print as backslash.
- %
- \def\thirdarg{#3}%
- %
- % If third arg is present, precede it with space in sort key.
- \ifx\thirdarg\emptymacro
- \let\subentry = \empty
- \else
- \def\subentry{ #3}%
- \fi
- %
- % First process the index-string with all font commands turned off
- % to get the string to sort by.
- {\indexnofonts \xdef\indexsorttmp{#2\subentry}}%
- %
- % Now produce the complete index entry, with both the sort key and the
- % original text, including any font commands.
- \toks0 = {#2}%
- \edef\temp{%
- \write\csname#1indfile\endcsname{%
- \realbackslash entry{\indexsorttmp}{\folio}{\the\toks0}}%
- }%
- %
- % If third (subentry) arg is present, add it to the index string.
- \ifx\thirdarg\emptymacro \else
- \toks0 = {#3}%
- \edef\temp{\temp{\the\toks0}}%
- \fi
- %
- % If a skip is the last thing on the list now, preserve it
- % by backing up by \lastskip, doing the \write, then inserting
- % the skip again. Otherwise, the whatsit generated by the
- % \write will make \lastskip zero. The result is that sequences
- % like this:
- % @end defun
- % @tindex whatever
- % @defun ...
- % will have extra space inserted, because the \medbreak in the
- % start of the @defun won't see the skip inserted by the @end of
- % the previous defun.
- %
- % But don't do any of this if we're not in vertical mode. We
- % don't want to do a \vskip and prematurely end a paragraph.
- %
- % Avoid page breaks due to these extra skips, too.
- %
- \iflinks
- \ifvmode
- \skip0 = \lastskip
- \ifdim\lastskip = 0pt \else \nobreak\vskip-\lastskip \fi
- \fi
- %
- \temp % do the write
- %
- %
- \ifvmode \ifdim\skip0 = 0pt \else \nobreak\vskip\skip0 \fi \fi
- \fi
- }%
- }%
- \penalty\count255
- }%
-}
-
-% The index entry written in the file actually looks like
-% \entry {sortstring}{page}{topic}
-% or
-% \entry {sortstring}{page}{topic}{subtopic}
-% The texindex program reads in these files and writes files
-% containing these kinds of lines:
-% \initial {c}
-% before the first topic whose initial is c
-% \entry {topic}{pagelist}
-% for a topic that is used without subtopics
-% \primary {topic}
-% for the beginning of a topic that is used with subtopics
-% \secondary {subtopic}{pagelist}
-% for each subtopic.
-
-% Define the user-accessible indexing commands
-% @findex, @vindex, @kindex, @cindex.
-
-\def\findex {\fnindex}
-\def\kindex {\kyindex}
-\def\cindex {\cpindex}
-\def\vindex {\vrindex}
-\def\tindex {\tpindex}
-\def\pindex {\pgindex}
-
-\def\cindexsub {\begingroup\obeylines\cindexsub}
-{\obeylines %
-\gdef\cindexsub "#1" #2^^M{\endgroup %
-\dosubind{cp}{#2}{#1}}}
-
-% Define the macros used in formatting output of the sorted index material.
-
-% @printindex causes a particular index (the ??s file) to get printed.
-% It does not print any chapter heading (usually an @unnumbered).
-%
-\def\printindex{\parsearg\doprintindex}
-\def\doprintindex#1{\begingroup
- \dobreak \chapheadingskip{10000}%
- %
- \indexfonts \rm
- \tolerance = 9500
- \indexbreaks
- %
- % See if the index file exists and is nonempty.
- % Change catcode of @ here so that if the index file contains
- % \initial {@}
- % as its first line, TeX doesn't complain about mismatched braces
- % (because it thinks @} is a control sequence).
- \catcode`\@ = 11
- \openin 1 \jobname.#1s
- \ifeof 1
- % \enddoublecolumns gets confused if there is no text in the index,
- % and it loses the chapter title and the aux file entries for the
- % index. The easiest way to prevent this problem is to make sure
- % there is some text.
- (Index is nonexistent)
- \else
- %
- % If the index file exists but is empty, then \openin leaves \ifeof
- % false. We have to make TeX try to read something from the file, so
- % it can discover if there is anything in it.
- \read 1 to \temp
- \ifeof 1
- (Index is empty)
- \else
- % Index files are almost Texinfo source, but we use \ as the escape
- % character. It would be better to use @, but that's too big a change
- % to make right now.
- \def\indexbackslash{\rawbackslashxx}%
- \catcode`\\ = 0
- \escapechar = `\\
- \begindoublecolumns
- \input \jobname.#1s
- \enddoublecolumns
- \fi
- \fi
- \closein 1
-\endgroup}
-
-% These macros are used by the sorted index file itself.
-% Change them to control the appearance of the index.
-
-\def\initial#1{{%
- % Some minor font changes for the special characters.
- \let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt
- %
- % Remove any glue we may have, we'll be inserting our own.
- \removelastskip
- %
- % We like breaks before the index initials, so insert a bonus.
- \penalty -300
- %
- % Typeset the initial. Making this add up to a whole number of
- % baselineskips increases the chance of the dots lining up from column
- % to column. It still won't often be perfect, because of the stretch
- % we need before each entry, but it's better.
- %
- % No shrink because it confuses \balancecolumns.
- \vskip 1.67\baselineskip plus .5\baselineskip
- \leftline{\secbf #1}%
- \vskip .33\baselineskip plus .1\baselineskip
- %
- % Do our best not to break after the initial.
- \nobreak
-}}
-
-% This typesets a paragraph consisting of #1, dot leaders, and then #2
-% flush to the right margin. It is used for index and table of contents
-% entries. The paragraph is indented by \leftskip.
-%
-\def\entry#1#2{\begingroup
- %
- % Start a new paragraph if necessary, so our assignments below can't
- % affect previous text.
- \par
- %
- % Do not fill out the last line with white space.
- \parfillskip = 0in
- %
- % No extra space above this paragraph.
- \parskip = 0in
- %
- % Do not prefer a separate line ending with a hyphen to fewer lines.
- \finalhyphendemerits = 0
- %
- % \hangindent is only relevant when the entry text and page number
- % don't both fit on one line. In that case, bob suggests starting the
- % dots pretty far over on the line. Unfortunately, a large
- % indentation looks wrong when the entry text itself is broken across
- % lines. So we use a small indentation and put up with long leaders.
- %
- % \hangafter is reset to 1 (which is the value we want) at the start
- % of each paragraph, so we need not do anything with that.
- \hangindent = 2em
- %
- % When the entry text needs to be broken, just fill out the first line
- % with blank space.
- \rightskip = 0pt plus1fil
- %
- % A bit of stretch before each entry for the benefit of balancing columns.
- \vskip 0pt plus1pt
- %
- % Start a ``paragraph'' for the index entry so the line breaking
- % parameters we've set above will have an effect.
- \noindent
- %
- % Insert the text of the index entry. TeX will do line-breaking on it.
- #1%
- % The following is kludged to not output a line of dots in the index if
- % there are no page numbers. The next person who breaks this will be
- % cursed by a Unix daemon.
- \def\tempa{{\rm }}%
- \def\tempb{#2}%
- \edef\tempc{\tempa}%
- \edef\tempd{\tempb}%
- \ifx\tempc\tempd\ \else%
- %
- % If we must, put the page number on a line of its own, and fill out
- % this line with blank space. (The \hfil is overwhelmed with the
- % fill leaders glue in \indexdotfill if the page number does fit.)
- \hfil\penalty50
- \null\nobreak\indexdotfill % Have leaders before the page number.
- %
- % The `\ ' here is removed by the implicit \unskip that TeX does as
- % part of (the primitive) \par. Without it, a spurious underfull
- % \hbox ensues.
- \ #2% The page number ends the paragraph.
- \fi%
- \par
-\endgroup}
-
-% Like \dotfill except takes at least 1 em.
-\def\indexdotfill{\cleaders
- \hbox{$\mathsurround=0pt \mkern1.5mu ${\it .}$ \mkern1.5mu$}\hskip 1em plus 1fill}
-
-\def\primary #1{\line{#1\hfil}}
-
-\newskip\secondaryindent \secondaryindent=0.5cm
-
-\def\secondary #1#2{
-{\parfillskip=0in \parskip=0in
-\hangindent =1in \hangafter=1
-\noindent\hskip\secondaryindent\hbox{#1}\indexdotfill #2\par
-}}
-
-% Define two-column mode, which we use to typeset indexes.
-% Adapted from the TeXbook, page 416, which is to say,
-% the manmac.tex format used to print the TeXbook itself.
-\catcode`\@=11
-
-\newbox\partialpage
-\newdimen\doublecolumnhsize
-
-\def\begindoublecolumns{\begingroup % ended by \enddoublecolumns
- % Grab any single-column material above us.
- \output = {\global\setbox\partialpage = \vbox{%
- %
- % Here is a possibility not foreseen in manmac: if we accumulate a
- % whole lot of material, we might end up calling this \output
- % routine twice in a row (see the doublecol-lose test, which is
- % essentially a couple of indexes with @setchapternewpage off). In
- % that case, we must prevent the second \partialpage from
- % simply overwriting the first, causing us to lose the page.
- % This will preserve it until a real output routine can ship it
- % out. Generally, \partialpage will be empty when this runs and
- % this will be a no-op.
- \unvbox\partialpage
- %
- % Unvbox the main output page.
- \unvbox255
- \kern-\topskip \kern\baselineskip
- }}%
- \eject
- %
- % Use the double-column output routine for subsequent pages.
- \output = {\doublecolumnout}%
- %
- % Change the page size parameters. We could do this once outside this
- % routine, in each of @smallbook, @afourpaper, and the default 8.5x11
- % format, but then we repeat the same computation. Repeating a couple
- % of assignments once per index is clearly meaningless for the
- % execution time, so we may as well do it in one place.
- %
- % First we halve the line length, less a little for the gutter between
- % the columns. We compute the gutter based on the line length, so it
- % changes automatically with the paper format. The magic constant
- % below is chosen so that the gutter has the same value (well, +-<1pt)
- % as it did when we hard-coded it.
- %
- % We put the result in a separate register, \doublecolumhsize, so we
- % can restore it in \pagesofar, after \hsize itself has (potentially)
- % been clobbered.
- %
- \doublecolumnhsize = \hsize
- \advance\doublecolumnhsize by -.04154\hsize
- \divide\doublecolumnhsize by 2
- \hsize = \doublecolumnhsize
- %
- % Double the \vsize as well. (We don't need a separate register here,
- % since nobody clobbers \vsize.)
- \advance\vsize by -\ht\partialpage
- \vsize = 2\vsize
-}
-
-% The double-column output routine for all double-column pages except
-% the last.
-%
-\def\doublecolumnout{%
- \splittopskip=\topskip \splitmaxdepth=\maxdepth
- % Get the available space for the double columns -- the normal
- % (undoubled) page height minus any material left over from the
- % previous page.
- \dimen@ = \vsize
- \divide\dimen@ by 2
- %
- % box0 will be the left-hand column, box2 the right.
- \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
- \onepageout\pagesofar
- \unvbox255
- \penalty\outputpenalty
-}
-\def\pagesofar{%
- % Re-output the contents of the output page -- any previous material,
- % followed by the two boxes we just split, in box0 and box2.
- \advance\vsize by \ht\partialpage
- \unvbox\partialpage
- %
- \hsize = \doublecolumnhsize
- \wd0=\hsize \wd2=\hsize
- \hbox to\pagewidth{\box0\hfil\box2}%
-}
-\def\enddoublecolumns{%
- \output = {%
- % Split the last of the double-column material. Leave on the
- % current page, no automatic page break.
- \balancecolumns
- %
- % If we end up splitting too much material for the current page,
- % though, there will be another page break right after this \output
- % invocation ends. Having called \balancecolumns once, we do not
- % want to call it again. Therefore, reset \output to its normal
- % definition right away. (We hope \balancecolumns will never be
- % called on to balance too much material, but if it is, this makes
- % the output somewhat more palatable.)
- \global\output = {\onepageout{\pagecontents\PAGE}}%
- %
- % \pagegoal was set to the doubled \vsize above, since we restarted
- % the current page. We're now back to normal single-column
- % typesetting, so reset \pagegoal to the normal \vsize.
- \pagegoal = \vsize
- }%
- \eject
- \endgroup % started in \begindoublecolumns
-}
-\def\balancecolumns{%
- % Called at the end of the double column material.
- \setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120.
- \dimen@ = \ht0
- \advance\dimen@ by \topskip
- \advance\dimen@ by-\baselineskip
- \divide\dimen@ by 2 % target to split to
- %debug\message{final 2-column material height=\the\ht0, target=\the\dimen@.}%
- \splittopskip = \topskip
- % Loop until we get a decent breakpoint.
- {%
- \vbadness = 10000
- \loop
- \global\setbox3 = \copy0
- \global\setbox1 = \vsplit3 to \dimen@
- \ifdim\ht3>\dimen@
- \global\advance\dimen@ by 1pt
- \repeat
- }%
- %debug\message{split to \the\dimen@, column heights: \the\ht1, \the\ht3.}%
- \setbox0=\vbox to\dimen@{\unvbox1}%
- \setbox2=\vbox to\dimen@{\unvbox3}%
- %
- \pagesofar
-}
-\catcode`\@ = \other
-
-
-\message{sectioning,}
-% Define chapters, sections, etc.
-
-\newcount\chapno
-\newcount\secno \secno=0
-\newcount\subsecno \subsecno=0
-\newcount\subsubsecno \subsubsecno=0
-
-% This counter is funny since it counts through charcodes of letters A, B, ...
-\newcount\appendixno \appendixno = `\@
-\def\appendixletter{\char\the\appendixno}
-
-% Each @chapter defines this as the name of the chapter.
-% page headings and footings can use it. @section does likewise.
-\def\thischapter{}
-\def\thissection{}
-
-\newcount\absseclevel % used to calculate proper heading level
-\newcount\secbase\secbase=0 % @raise/lowersections modify this count
-
-% @raisesections: treat @section as chapter, @subsection as section, etc.
-\def\raisesections{\global\advance\secbase by -1}
-\let\up=\raisesections % original BFox name
-
-% @lowersections: treat @chapter as section, @section as subsection, etc.
-\def\lowersections{\global\advance\secbase by 1}
-\let\down=\lowersections % original BFox name
-
-% Choose a numbered-heading macro
-% #1 is heading level if unmodified by @raisesections or @lowersections
-% #2 is text for heading
-\def\numhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
-\ifcase\absseclevel
- \chapterzzz{#2}
-\or
- \seczzz{#2}
-\or
- \numberedsubseczzz{#2}
-\or
- \numberedsubsubseczzz{#2}
-\else
- \ifnum \absseclevel<0
- \chapterzzz{#2}
- \else
- \numberedsubsubseczzz{#2}
- \fi
-\fi
-}
-
-% like \numhead, but chooses appendix heading levels
-\def\apphead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
-\ifcase\absseclevel
- \appendixzzz{#2}
-\or
- \appendixsectionzzz{#2}
-\or
- \appendixsubseczzz{#2}
-\or
- \appendixsubsubseczzz{#2}
-\else
- \ifnum \absseclevel<0
- \appendixzzz{#2}
- \else
- \appendixsubsubseczzz{#2}
- \fi
-\fi
-}
-
-% like \numhead, but chooses numberless heading levels
-\def\unnmhead#1#2{\absseclevel=\secbase\advance\absseclevel by #1
-\ifcase\absseclevel
- \unnumberedzzz{#2}
-\or
- \unnumberedseczzz{#2}
-\or
- \unnumberedsubseczzz{#2}
-\or
- \unnumberedsubsubseczzz{#2}
-\else
- \ifnum \absseclevel<0
- \unnumberedzzz{#2}
- \else
- \unnumberedsubsubseczzz{#2}
- \fi
-\fi
-}
-
-% @chapter, @appendix, @unnumbered.
-\def\thischaptername{No Chapter Title}
-\outer\def\chapter{\parsearg\chapteryyy}
-\def\chapteryyy #1{\numhead0{#1}} % normally numhead0 calls chapterzzz
-\def\chapterzzz #1{%
-\secno=0 \subsecno=0 \subsubsecno=0
-\global\advance \chapno by 1 \message{\putwordChapter\space \the\chapno}%
-\chapmacro {#1}{\the\chapno}%
-\gdef\thissection{#1}%
-\gdef\thischaptername{#1}%
-% We don't substitute the actual chapter name into \thischapter
-% because we don't want its macros evaluated now.
-\xdef\thischapter{\putwordChapter{} \the\chapno: \noexpand\thischaptername}%
-\toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash chapentry{\the\toks0}%
- {\the\chapno}}}%
-\temp
-\donoderef
-\global\let\section = \numberedsec
-\global\let\subsection = \numberedsubsec
-\global\let\subsubsection = \numberedsubsubsec
-}
-
-\outer\def\appendix{\parsearg\appendixyyy}
-\def\appendixyyy #1{\apphead0{#1}} % normally apphead0 calls appendixzzz
-\def\appendixzzz #1{%
-\secno=0 \subsecno=0 \subsubsecno=0
-\global\advance \appendixno by 1
-\message{\putwordAppendix\space \appendixletter}%
-\chapmacro {#1}{\putwordAppendix{} \appendixletter}%
-\gdef\thissection{#1}%
-\gdef\thischaptername{#1}%
-\xdef\thischapter{\putwordAppendix{} \appendixletter: \noexpand\thischaptername}%
-\toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash chapentry{\the\toks0}%
- {\putwordAppendix{} \appendixletter}}}%
-\temp
-\appendixnoderef
-\global\let\section = \appendixsec
-\global\let\subsection = \appendixsubsec
-\global\let\subsubsection = \appendixsubsubsec
-}
-
-% @centerchap is like @unnumbered, but the heading is centered.
-\outer\def\centerchap{\parsearg\centerchapyyy}
-\def\centerchapyyy #1{{\let\unnumbchapmacro=\centerchapmacro \unnumberedyyy{#1}}}
-
-% @top is like @unnumbered.
-\outer\def\top{\parsearg\unnumberedyyy}
-
-\outer\def\unnumbered{\parsearg\unnumberedyyy}
-\def\unnumberedyyy #1{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz
-\def\unnumberedzzz #1{%
-\secno=0 \subsecno=0 \subsubsecno=0
-%
-% This used to be simply \message{#1}, but TeX fully expands the
-% argument to \message. Therefore, if #1 contained @-commands, TeX
-% expanded them. For example, in `@unnumbered The @cite{Book}', TeX
-% expanded @cite (which turns out to cause errors because \cite is meant
-% to be executed, not expanded).
-%
-% Anyway, we don't want the fully-expanded definition of @cite to appear
-% as a result of the \message, we just want `@cite' itself. We use
-% \the<toks register> to achieve this: TeX expands \the<toks> only once,
-% simply yielding the contents of <toks register>. (We also do this for
-% the toc entries.)
-\toks0 = {#1}\message{(\the\toks0)}%
-%
-\unnumbchapmacro {#1}%
-\gdef\thischapter{#1}\gdef\thissection{#1}%
-\toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash unnumbchapentry{\the\toks0}}}%
-\temp
-\unnumbnoderef
-\global\let\section = \unnumberedsec
-\global\let\subsection = \unnumberedsubsec
-\global\let\subsubsection = \unnumberedsubsubsec
-}
-
-% Sections.
-\outer\def\numberedsec{\parsearg\secyyy}
-\def\secyyy #1{\numhead1{#1}} % normally calls seczzz
-\def\seczzz #1{%
-\subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
-\gdef\thissection{#1}\secheading {#1}{\the\chapno}{\the\secno}%
-\toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash secentry{\the\toks0}%
- {\the\chapno}{\the\secno}}}%
-\temp
-\donoderef
-\nobreak
-}
-
-\outer\def\appendixsection{\parsearg\appendixsecyyy}
-\outer\def\appendixsec{\parsearg\appendixsecyyy}
-\def\appendixsecyyy #1{\apphead1{#1}} % normally calls appendixsectionzzz
-\def\appendixsectionzzz #1{%
-\subsecno=0 \subsubsecno=0 \global\advance \secno by 1 %
-\gdef\thissection{#1}\secheading {#1}{\appendixletter}{\the\secno}%
-\toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash secentry{\the\toks0}%
- {\appendixletter}{\the\secno}}}%
-\temp
-\appendixnoderef
-\nobreak
-}
-
-\outer\def\unnumberedsec{\parsearg\unnumberedsecyyy}
-\def\unnumberedsecyyy #1{\unnmhead1{#1}} % normally calls unnumberedseczzz
-\def\unnumberedseczzz #1{%
-\plainsecheading {#1}\gdef\thissection{#1}%
-\toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash unnumbsecentry{\the\toks0}}}%
-\temp
-\unnumbnoderef
-\nobreak
-}
-
-% Subsections.
-\outer\def\numberedsubsec{\parsearg\numberedsubsecyyy}
-\def\numberedsubsecyyy #1{\numhead2{#1}} % normally calls numberedsubseczzz
-\def\numberedsubseczzz #1{%
-\gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
-\subsecheading {#1}{\the\chapno}{\the\secno}{\the\subsecno}%
-\toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash subsecentry{\the\toks0}%
- {\the\chapno}{\the\secno}{\the\subsecno}}}%
-\temp
-\donoderef
-\nobreak
-}
-
-\outer\def\appendixsubsec{\parsearg\appendixsubsecyyy}
-\def\appendixsubsecyyy #1{\apphead2{#1}} % normally calls appendixsubseczzz
-\def\appendixsubseczzz #1{%
-\gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 %
-\subsecheading {#1}{\appendixletter}{\the\secno}{\the\subsecno}%
-\toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash subsecentry{\the\toks0}%
- {\appendixletter}{\the\secno}{\the\subsecno}}}%
-\temp
-\appendixnoderef
-\nobreak
-}
-
-\outer\def\unnumberedsubsec{\parsearg\unnumberedsubsecyyy}
-\def\unnumberedsubsecyyy #1{\unnmhead2{#1}} %normally calls unnumberedsubseczzz
-\def\unnumberedsubseczzz #1{%
-\plainsubsecheading {#1}\gdef\thissection{#1}%
-\toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash unnumbsubsecentry%
- {\the\toks0}}}%
-\temp
-\unnumbnoderef
-\nobreak
-}
-
-% Subsubsections.
-\outer\def\numberedsubsubsec{\parsearg\numberedsubsubsecyyy}
-\def\numberedsubsubsecyyy #1{\numhead3{#1}} % normally numberedsubsubseczzz
-\def\numberedsubsubseczzz #1{%
-\gdef\thissection{#1}\global\advance \subsubsecno by 1 %
-\subsubsecheading {#1}
- {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
-\toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash subsubsecentry{\the\toks0}%
- {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}}}%
-\temp
-\donoderef
-\nobreak
-}
-
-\outer\def\appendixsubsubsec{\parsearg\appendixsubsubsecyyy}
-\def\appendixsubsubsecyyy #1{\apphead3{#1}} % normally appendixsubsubseczzz
-\def\appendixsubsubseczzz #1{%
-\gdef\thissection{#1}\global\advance \subsubsecno by 1 %
-\subsubsecheading {#1}
- {\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}%
-\toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash subsubsecentry{\the\toks0}%
- {\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}}}%
-\temp
-\appendixnoderef
-\nobreak
-}
-
-\outer\def\unnumberedsubsubsec{\parsearg\unnumberedsubsubsecyyy}
-\def\unnumberedsubsubsecyyy #1{\unnmhead3{#1}} %normally unnumberedsubsubseczzz
-\def\unnumberedsubsubseczzz #1{%
-\plainsubsubsecheading {#1}\gdef\thissection{#1}%
-\toks0 = {#1}%
-\edef\temp{\noexpand\writetocentry{\realbackslash unnumbsubsubsecentry%
- {\the\toks0}}}%
-\temp
-\unnumbnoderef
-\nobreak
-}
-
-% These are variants which are not "outer", so they can appear in @ifinfo.
-% Actually, they should now be obsolete; ordinary section commands should work.
-\def\infotop{\parsearg\unnumberedzzz}
-\def\infounnumbered{\parsearg\unnumberedzzz}
-\def\infounnumberedsec{\parsearg\unnumberedseczzz}
-\def\infounnumberedsubsec{\parsearg\unnumberedsubseczzz}
-\def\infounnumberedsubsubsec{\parsearg\unnumberedsubsubseczzz}
-
-\def\infoappendix{\parsearg\appendixzzz}
-\def\infoappendixsec{\parsearg\appendixseczzz}
-\def\infoappendixsubsec{\parsearg\appendixsubseczzz}
-\def\infoappendixsubsubsec{\parsearg\appendixsubsubseczzz}
-
-\def\infochapter{\parsearg\chapterzzz}
-\def\infosection{\parsearg\sectionzzz}
-\def\infosubsection{\parsearg\subsectionzzz}
-\def\infosubsubsection{\parsearg\subsubsectionzzz}
-
-% These macros control what the section commands do, according
-% to what kind of chapter we are in (ordinary, appendix, or unnumbered).
-% Define them by default for a numbered chapter.
-\global\let\section = \numberedsec
-\global\let\subsection = \numberedsubsec
-\global\let\subsubsection = \numberedsubsubsec
-
-% Define @majorheading, @heading and @subheading
-
-% NOTE on use of \vbox for chapter headings, section headings, and such:
-% 1) We use \vbox rather than the earlier \line to permit
-% overlong headings to fold.
-% 2) \hyphenpenalty is set to 10000 because hyphenation in a
-% heading is obnoxious; this forbids it.
-% 3) Likewise, headings look best if no \parindent is used, and
-% if justification is not attempted. Hence \raggedright.
-
-
-\def\majorheading{\parsearg\majorheadingzzz}
-\def\majorheadingzzz #1{%
-{\advance\chapheadingskip by 10pt \chapbreak }%
-{\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
- \parindent=0pt\raggedright
- \rm #1\hfill}}\bigskip \par\penalty 200}
-
-\def\chapheading{\parsearg\chapheadingzzz}
-\def\chapheadingzzz #1{\chapbreak %
-{\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
- \parindent=0pt\raggedright
- \rm #1\hfill}}\bigskip \par\penalty 200}
-
-% @heading, @subheading, @subsubheading.
-\def\heading{\parsearg\plainsecheading}
-\def\subheading{\parsearg\plainsubsecheading}
-\def\subsubheading{\parsearg\plainsubsubsecheading}
-
-% These macros generate a chapter, section, etc. heading only
-% (including whitespace, linebreaking, etc. around it),
-% given all the information in convenient, parsed form.
-
-%%% Args are the skip and penalty (usually negative)
-\def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi}
-
-\def\setchapterstyle #1 {\csname CHAPF#1\endcsname}
-
-%%% Define plain chapter starts, and page on/off switching for it
-% Parameter controlling skip before chapter headings (if needed)
-
-\newskip\chapheadingskip
-
-\def\chapbreak{\dobreak \chapheadingskip {-4000}}
-\def\chappager{\par\vfill\supereject}
-\def\chapoddpage{\chappager \ifodd\pageno \else \hbox to 0pt{} \chappager\fi}
-
-\def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname}
-
-\def\CHAPPAGoff{%
-\global\let\contentsalignmacro = \chappager
-\global\let\pchapsepmacro=\chapbreak
-\global\let\pagealignmacro=\chappager}
-
-\def\CHAPPAGon{%
-\global\let\contentsalignmacro = \chappager
-\global\let\pchapsepmacro=\chappager
-\global\let\pagealignmacro=\chappager
-\global\def\HEADINGSon{\HEADINGSsingle}}
-
-\def\CHAPPAGodd{
-\global\let\contentsalignmacro = \chapoddpage
-\global\let\pchapsepmacro=\chapoddpage
-\global\let\pagealignmacro=\chapoddpage
-\global\def\HEADINGSon{\HEADINGSdouble}}
-
-\CHAPPAGon
-
-\def\CHAPFplain{
-\global\let\chapmacro=\chfplain
-\global\let\unnumbchapmacro=\unnchfplain
-\global\let\centerchapmacro=\centerchfplain}
-
-% Plain chapter opening.
-% #1 is the text, #2 the chapter number or empty if unnumbered.
-\def\chfplain#1#2{%
- \pchapsepmacro
- {%
- \chapfonts \rm
- \def\chapnum{#2}%
- \setbox0 = \hbox{#2\ifx\chapnum\empty\else\enspace\fi}%
- \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
- \hangindent = \wd0 \centerparametersmaybe
- \unhbox0 #1\par}%
- }%
- \nobreak\bigskip % no page break after a chapter title
- \nobreak
-}
-
-% Plain opening for unnumbered.
-\def\unnchfplain#1{\chfplain{#1}{}}
-
-% @centerchap -- centered and unnumbered.
-\let\centerparametersmaybe = \relax
-\def\centerchfplain#1{{%
- \def\centerparametersmaybe{%
- \advance\rightskip by 3\rightskip
- \leftskip = \rightskip
- \parfillskip = 0pt
- }%
- \chfplain{#1}{}%
-}}
-
-\CHAPFplain % The default
-
-\def\unnchfopen #1{%
-\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
- \parindent=0pt\raggedright
- \rm #1\hfill}}\bigskip \par\nobreak
-}
-
-\def\chfopen #1#2{\chapoddpage {\chapfonts
-\vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}%
-\par\penalty 5000 %
-}
-
-\def\centerchfopen #1{%
-\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
- \parindent=0pt
- \hfill {\rm #1}\hfill}}\bigskip \par\nobreak
-}
-
-\def\CHAPFopen{
-\global\let\chapmacro=\chfopen
-\global\let\unnumbchapmacro=\unnchfopen
-\global\let\centerchapmacro=\centerchfopen}
-
-
-% Section titles.
-\newskip\secheadingskip
-\def\secheadingbreak{\dobreak \secheadingskip {-1000}}
-\def\secheading#1#2#3{\sectionheading{sec}{#2.#3}{#1}}
-\def\plainsecheading#1{\sectionheading{sec}{}{#1}}
-
-% Subsection titles.
-\newskip \subsecheadingskip
-\def\subsecheadingbreak{\dobreak \subsecheadingskip {-500}}
-\def\subsecheading#1#2#3#4{\sectionheading{subsec}{#2.#3.#4}{#1}}
-\def\plainsubsecheading#1{\sectionheading{subsec}{}{#1}}
-
-% Subsubsection titles.
-\let\subsubsecheadingskip = \subsecheadingskip
-\let\subsubsecheadingbreak = \subsecheadingbreak
-\def\subsubsecheading#1#2#3#4#5{\sectionheading{subsubsec}{#2.#3.#4.#5}{#1}}
-\def\plainsubsubsecheading#1{\sectionheading{subsubsec}{}{#1}}
-
-
-% Print any size section title.
-%
-% #1 is the section type (sec/subsec/subsubsec), #2 is the section
-% number (maybe empty), #3 the text.
-\def\sectionheading#1#2#3{%
- {%
- \expandafter\advance\csname #1headingskip\endcsname by \parskip
- \csname #1headingbreak\endcsname
- }%
- {%
- % Switch to the right set of fonts.
- \csname #1fonts\endcsname \rm
- %
- % Only insert the separating space if we have a section number.
- \def\secnum{#2}%
- \setbox0 = \hbox{#2\ifx\secnum\empty\else\enspace\fi}%
- %
- \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright
- \hangindent = \wd0 % zero if no section number
- \unhbox0 #3}%
- }%
- \ifdim\parskip<10pt \nobreak\kern10pt\nobreak\kern-\parskip\fi \nobreak
-}
-
-
-\message{toc,}
-\newwrite\tocfile
-
-% Write an entry to the toc file, opening it if necessary.
-% Called from @chapter, etc. We supply {\folio} at the end of the
-% argument, which will end up as the last argument to the \...entry macro.
-%
-% We open the .toc file here instead of at @setfilename or any other
-% given time so that @contents can be put in the document anywhere.
-%
-\newif\iftocfileopened
-\def\writetocentry#1{%
- \iftocfileopened\else
- \immediate\openout\tocfile = \jobname.toc
- \global\tocfileopenedtrue
- \fi
- \iflinks \write\tocfile{#1{\folio}}\fi
-}
-
-\newskip\contentsrightmargin \contentsrightmargin=1in
-\newcount\savepageno
-\newcount\lastnegativepageno \lastnegativepageno = -1
-
-% Finish up the main text and prepare to read what we've written
-% to \tocfile.
-%
-\def\startcontents#1{%
- % If @setchapternewpage on, and @headings double, the contents should
- % start on an odd page, unlike chapters. Thus, we maintain
- % \contentsalignmacro in parallel with \pagealignmacro.
- % From: Torbjorn Granlund <tege@matematik.su.se>
- \contentsalignmacro
- \immediate\closeout\tocfile
- %
- % Don't need to put `Contents' or `Short Contents' in the headline.
- % It is abundantly clear what they are.
- \unnumbchapmacro{#1}\def\thischapter{}%
- \savepageno = \pageno
- \begingroup % Set up to handle contents files properly.
- \catcode`\\=0 \catcode`\{=1 \catcode`\}=2 \catcode`\@=11
- % We can't do this, because then an actual ^ in a section
- % title fails, e.g., @chapter ^ -- exponentiation. --karl, 9jul97.
- %\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi
- \raggedbottom % Worry more about breakpoints than the bottom.
- \advance\hsize by -\contentsrightmargin % Don't use the full line length.
- %
- % Roman numerals for page numbers.
- \ifnum \pageno>0 \pageno = \lastnegativepageno \fi
-}
-
-
-% Normal (long) toc.
-\def\contents{%
- \startcontents{\putwordTableofContents}%
- \openin 1 \jobname.toc
- \ifeof 1 \else
- \closein 1
- \input \jobname.toc
- \fi
- \vfill \eject
- \endgroup
- \lastnegativepageno = \pageno
- \pageno = \savepageno
-}
-
-% And just the chapters.
-\def\summarycontents{%
- \startcontents{\putwordShortContents}%
- %
- \let\chapentry = \shortchapentry
- \let\unnumbchapentry = \shortunnumberedentry
- % We want a true roman here for the page numbers.
- \secfonts
- \let\rm=\shortcontrm \let\bf=\shortcontbf \let\sl=\shortcontsl
- \rm
- \hyphenpenalty = 10000
- \advance\baselineskip by 1pt % Open it up a little.
- \def\secentry ##1##2##3##4{}
- \def\unnumbsecentry ##1##2{}
- \def\subsecentry ##1##2##3##4##5{}
- \def\unnumbsubsecentry ##1##2{}
- \def\subsubsecentry ##1##2##3##4##5##6{}
- \def\unnumbsubsubsecentry ##1##2{}
- \openin 1 \jobname.toc
- \ifeof 1 \else
- \closein 1
- \input \jobname.toc
- \fi
- \vfill \eject
- \endgroup
- \lastnegativepageno = \pageno
- \pageno = \savepageno
-}
-\let\shortcontents = \summarycontents
-
-% These macros generate individual entries in the table of contents.
-% The first argument is the chapter or section name.
-% The last argument is the page number.
-% The arguments in between are the chapter number, section number, ...
-
-% Chapter-level things, for both the long and short contents.
-\def\chapentry#1#2#3{\dochapentry{#2\labelspace#1}{#3}}
-
-% See comments in \dochapentry re vbox and related settings
-\def\shortchapentry#1#2#3{%
- \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno{#3}}%
-}
-
-% Typeset the label for a chapter or appendix for the short contents.
-% The arg is, e.g. `Appendix A' for an appendix, or `3' for a chapter.
-% We could simplify the code here by writing out an \appendixentry
-% command in the toc file for appendices, instead of using \chapentry
-% for both, but it doesn't seem worth it.
-\setbox0 = \hbox{\shortcontrm \putwordAppendix }
-\newdimen\shortappendixwidth \shortappendixwidth = \wd0
-
-\def\shortchaplabel#1{%
- % We typeset #1 in a box of constant width, regardless of the text of
- % #1, so the chapter titles will come out aligned.
- \setbox0 = \hbox{#1}%
- \dimen0 = \ifdim\wd0 > \shortappendixwidth \shortappendixwidth \else 0pt \fi
- %
- % This space should be plenty, since a single number is .5em, and the
- % widest letter (M) is 1em, at least in the Computer Modern fonts.
- % (This space doesn't include the extra space that gets added after
- % the label; that gets put in by \shortchapentry above.)
- \advance\dimen0 by 1.1em
- \hbox to \dimen0{#1\hfil}%
-}
-
-\def\unnumbchapentry#1#2{\dochapentry{#1}{#2}}
-\def\shortunnumberedentry#1#2{\tocentry{#1}{\doshortpageno{#2}}}
-
-% Sections.
-\def\secentry#1#2#3#4{\dosecentry{#2.#3\labelspace#1}{#4}}
-\def\unnumbsecentry#1#2{\dosecentry{#1}{#2}}
-
-% Subsections.
-\def\subsecentry#1#2#3#4#5{\dosubsecentry{#2.#3.#4\labelspace#1}{#5}}
-\def\unnumbsubsecentry#1#2{\dosubsecentry{#1}{#2}}
-
-% And subsubsections.
-\def\subsubsecentry#1#2#3#4#5#6{%
- \dosubsubsecentry{#2.#3.#4.#5\labelspace#1}{#6}}
-\def\unnumbsubsubsecentry#1#2{\dosubsubsecentry{#1}{#2}}
-
-% This parameter controls the indentation of the various levels.
-\newdimen\tocindent \tocindent = 3pc
-
-% Now for the actual typesetting. In all these, #1 is the text and #2 is the
-% page number.
-%
-% If the toc has to be broken over pages, we want it to be at chapters
-% if at all possible; hence the \penalty.
-\def\dochapentry#1#2{%
- \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip
- \begingroup
- \chapentryfonts
- \tocentry{#1}{\dopageno{#2}}%
- \endgroup
- \nobreak\vskip .25\baselineskip plus.1\baselineskip
-}
-
-\def\dosecentry#1#2{\begingroup
- \secentryfonts \leftskip=\tocindent
- \tocentry{#1}{\dopageno{#2}}%
-\endgroup}
-
-\def\dosubsecentry#1#2{\begingroup
- \subsecentryfonts \leftskip=2\tocindent
- \tocentry{#1}{\dopageno{#2}}%
-\endgroup}
-
-\def\dosubsubsecentry#1#2{\begingroup
- \subsubsecentryfonts \leftskip=3\tocindent
- \tocentry{#1}{\dopageno{#2}}%
-\endgroup}
-
-% Final typesetting of a toc entry; we use the same \entry macro as for
-% the index entries, but we want to suppress hyphenation here. (We
-% can't do that in the \entry macro, since index entries might consist
-% of hyphenated-identifiers-that-do-not-fit-on-a-line-and-nothing-else.)
-\def\tocentry#1#2{\begingroup
- \vskip 0pt plus1pt % allow a little stretch for the sake of nice page breaks
- % Do not use \turnoffactive in these arguments. Since the toc is
- % typeset in cmr, so characters such as _ would come out wrong; we
- % have to do the usual translation tricks.
- \entry{#1}{#2}%
-\endgroup}
-
-% Space between chapter (or whatever) number and the title.
-\def\labelspace{\hskip1em \relax}
-
-\def\dopageno#1{{\rm #1}}
-\def\doshortpageno#1{{\rm #1}}
-
-\def\chapentryfonts{\secfonts \rm}
-\def\secentryfonts{\textfonts}
-\let\subsecentryfonts = \textfonts
-\let\subsubsecentryfonts = \textfonts
-
-
-\message{environments,}
-
-% Since these characters are used in examples, it should be an even number of
-% \tt widths. Each \tt character is 1en, so two makes it 1em.
-% Furthermore, these definitions must come after we define our fonts.
-\newbox\dblarrowbox \newbox\longdblarrowbox
-\newbox\pushcharbox \newbox\bullbox
-\newbox\equivbox \newbox\errorbox
-
-%{\tentt
-%\global\setbox\dblarrowbox = \hbox to 1em{\hfil$\Rightarrow$\hfil}
-%\global\setbox\longdblarrowbox = \hbox to 1em{\hfil$\mapsto$\hfil}
-%\global\setbox\pushcharbox = \hbox to 1em{\hfil$\dashv$\hfil}
-%\global\setbox\equivbox = \hbox to 1em{\hfil$\ptexequiv$\hfil}
-% Adapted from the manmac format (p.420 of TeXbook)
-%\global\setbox\bullbox = \hbox to 1em{\kern.15em\vrule height .75ex width .85ex
-% depth .1ex\hfil}
-%}
-
-% @point{}, @result{}, @expansion{}, @print{}, @equiv{}.
-\def\point{$\star$}
-\def\result{\leavevmode\raise.15ex\hbox to 1em{\hfil$\Rightarrow$\hfil}}
-\def\expansion{\leavevmode\raise.1ex\hbox to 1em{\hfil$\mapsto$\hfil}}
-\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}}
-\def\equiv{\leavevmode\lower.1ex\hbox to 1em{\hfil$\ptexequiv$\hfil}}
-
-% Adapted from the TeXbook's \boxit.
-{\tentt \global\dimen0 = 3em}% Width of the box.
-\dimen2 = .55pt % Thickness of rules
-% The text. (`r' is open on the right, `e' somewhat less so on the left.)
-\setbox0 = \hbox{\kern-.75pt \tensf error\kern-1.5pt}
-
-\global\setbox\errorbox=\hbox to \dimen0{\hfil
- \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
- \advance\hsize by -2\dimen2 % Rules.
- \vbox{
- \hrule height\dimen2
- \hbox{\vrule width\dimen2 \kern3pt % Space to left of text.
- \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below.
- \kern3pt\vrule width\dimen2}% Space to right.
- \hrule height\dimen2}
- \hfil}
-
-% The @error{} command.
-\def\error{\leavevmode\lower.7ex\copy\errorbox}
-
-% @tex ... @end tex escapes into raw Tex temporarily.
-% One exception: @ is still an escape character, so that @end tex works.
-% But \@ or @@ will get a plain tex @ character.
-
-\def\tex{\begingroup
- \catcode `\\=0 \catcode `\{=1 \catcode `\}=2
- \catcode `\$=3 \catcode `\&=4 \catcode `\#=6
- \catcode `\^=7 \catcode `\_=8 \catcode `\~=13 \let~=\tie
- \catcode `\%=14
- \catcode 43=12 % plus
- \catcode`\"=12
- \catcode`\==12
- \catcode`\|=12
- \catcode`\<=12
- \catcode`\>=12
- \escapechar=`\\
- %
- \let\b=\ptexb
- \let\bullet=\ptexbullet
- \let\c=\ptexc
- \let\,=\ptexcomma
- \let\.=\ptexdot
- \let\dots=\ptexdots
- \let\equiv=\ptexequiv
- \let\!=\ptexexclam
- \let\i=\ptexi
- \let\{=\ptexlbrace
- \let\+=\tabalign
- \let\}=\ptexrbrace
- \let\*=\ptexstar
- \let\t=\ptext
- %
- \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
- \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}%
- \def\@{@}%
-\let\Etex=\endgroup}
-
-% Define @lisp ... @endlisp.
-% @lisp does a \begingroup so it can rebind things,
-% including the definition of @endlisp (which normally is erroneous).
-
-% Amount to narrow the margins by for @lisp.
-\newskip\lispnarrowing \lispnarrowing=0.4in
-
-% This is the definition that ^^M gets inside @lisp, @example, and other
-% such environments. \null is better than a space, since it doesn't
-% have any width.
-\def\lisppar{\null\endgraf}
-
-% Make each space character in the input produce a normal interword
-% space in the output. Don't allow a line break at this space, as this
-% is used only in environments like @example, where each line of input
-% should produce a line of output anyway.
-%
-{\obeyspaces %
-\gdef\sepspaces{\obeyspaces\let =\tie}}
-
-% Define \obeyedspace to be our active space, whatever it is. This is
-% for use in \parsearg.
-{\sepspaces%
-\global\let\obeyedspace= }
-
-% This space is always present above and below environments.
-\newskip\envskipamount \envskipamount = 0pt
-
-% Make spacing and below environment symmetrical. We use \parskip here
-% to help in doing that, since in @example-like environments \parskip
-% is reset to zero; thus the \afterenvbreak inserts no space -- but the
-% start of the next paragraph will insert \parskip
-%
-\def\aboveenvbreak{{\advance\envskipamount by \parskip
-\endgraf \ifdim\lastskip<\envskipamount
-\removelastskip \penalty-50 \vskip\envskipamount \fi}}
-
-\let\afterenvbreak = \aboveenvbreak
-
-% \nonarrowing is a flag. If "set", @lisp etc don't narrow margins.
-\let\nonarrowing=\relax
-
-% @cartouche ... @end cartouche: draw rectangle w/rounded corners around
-% environment contents.
-\font\circle=lcircle10
-\newdimen\circthick
-\newdimen\cartouter\newdimen\cartinner
-\newskip\normbskip\newskip\normpskip\newskip\normlskip
-\circthick=\fontdimen8\circle
-%
-\def\ctl{{\circle\char'013\hskip -6pt}}% 6pt from pl file: 1/2charwidth
-\def\ctr{{\hskip 6pt\circle\char'010}}
-\def\cbl{{\circle\char'012\hskip -6pt}}
-\def\cbr{{\hskip 6pt\circle\char'011}}
-\def\carttop{\hbox to \cartouter{\hskip\lskip
- \ctl\leaders\hrule height\circthick\hfil\ctr
- \hskip\rskip}}
-\def\cartbot{\hbox to \cartouter{\hskip\lskip
- \cbl\leaders\hrule height\circthick\hfil\cbr
- \hskip\rskip}}
-%
-\newskip\lskip\newskip\rskip
-
-\long\def\cartouche{%
-\begingroup
- \lskip=\leftskip \rskip=\rightskip
- \leftskip=0pt\rightskip=0pt %we want these *outside*.
- \cartinner=\hsize \advance\cartinner by-\lskip
- \advance\cartinner by-\rskip
- \cartouter=\hsize
- \advance\cartouter by 18.4pt % allow for 3pt kerns on either
-% side, and for 6pt waste from
-% each corner char, and rule thickness
- \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
- % Flag to tell @lisp, etc., not to narrow margin.
- \let\nonarrowing=\comment
- \vbox\bgroup
- \baselineskip=0pt\parskip=0pt\lineskip=0pt
- \carttop
- \hbox\bgroup
- \hskip\lskip
- \vrule\kern3pt
- \vbox\bgroup
- \hsize=\cartinner
- \kern3pt
- \begingroup
- \baselineskip=\normbskip
- \lineskip=\normlskip
- \parskip=\normpskip
- \vskip -\parskip
-\def\Ecartouche{%
- \endgroup
- \kern3pt
- \egroup
- \kern3pt\vrule
- \hskip\rskip
- \egroup
- \cartbot
- \egroup
-\endgroup
-}}
-
-
-% This macro is called at the beginning of all the @example variants,
-% inside a group.
-\def\nonfillstart{%
- \aboveenvbreak
- \inENV % This group ends at the end of the body
- \hfuzz = 12pt % Don't be fussy
- \sepspaces % Make spaces be word-separators rather than space tokens.
- \singlespace
- \let\par = \lisppar % don't ignore blank lines
- \obeylines % each line of input is a line of output
- \parskip = 0pt
- \parindent = 0pt
- \emergencystretch = 0pt % don't try to avoid overfull boxes
- % @cartouche defines \nonarrowing to inhibit narrowing
- % at next level down.
- \ifx\nonarrowing\relax
- \advance \leftskip by \lispnarrowing
- \exdentamount=\lispnarrowing
- \let\exdent=\nofillexdent
- \let\nonarrowing=\relax
- \fi
-}
-
-% Define the \E... control sequence only if we are inside the particular
-% environment, so the error checking in \end will work.
-%
-% To end an @example-like environment, we first end the paragraph (via
-% \afterenvbreak's vertical glue), and then the group. That way we keep
-% the zero \parskip that the environments set -- \parskip glue will be
-% inserted at the beginning of the next paragraph in the document, after
-% the environment.
-%
-\def\nonfillfinish{\afterenvbreak\endgroup}
-
-% @lisp: indented, narrowed, typewriter font.
-\def\lisp{\begingroup
- \nonfillstart
- \let\Elisp = \nonfillfinish
- \tt
- \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
- \gobble % eat return
-}
-
-% @example: Same as @lisp.
-\def\example{\begingroup \def\Eexample{\nonfillfinish\endgroup}\lisp}
-
-% @small... is usually equivalent to the non-small (@smallbook
-% redefines). We must call \example (or whatever) last in the
-% definition, since it reads the return following the @example (or
-% whatever) command.
-%
-% This actually allows (for example) @end display inside an
-% @smalldisplay. Too bad, but makeinfo will catch the error anyway.
-%
-\def\smalldisplay{\begingroup\def\Esmalldisplay{\nonfillfinish\endgroup}\display}
-\def\smallexample{\begingroup\def\Esmallexample{\nonfillfinish\endgroup}\lisp}
-\def\smallformat{\begingroup\def\Esmallformat{\nonfillfinish\endgroup}\format}
-\def\smalllisp{\begingroup\def\Esmalllisp{\nonfillfinish\endgroup}\lisp}
-
-% Real @smallexample and @smalllisp (when @smallbook): use smaller fonts.
-% Originally contributed by Pavel@xerox.
-\def\smalllispx{\begingroup
- \def\Esmalllisp{\nonfillfinish\endgroup}%
- \def\Esmallexample{\nonfillfinish\endgroup}%
- \indexfonts
- \lisp
-}
-
-% @display: same as @lisp except keep current font.
-%
-\def\display{\begingroup
- \nonfillstart
- \let\Edisplay = \nonfillfinish
- \gobble
-}
-
-% @smalldisplay (when @smallbook): @display plus smaller fonts.
-%
-\def\smalldisplayx{\begingroup
- \def\Esmalldisplay{\nonfillfinish\endgroup}%
- \indexfonts \rm
- \display
-}
-
-% @format: same as @display except don't narrow margins.
-%
-\def\format{\begingroup
- \let\nonarrowing = t
- \nonfillstart
- \let\Eformat = \nonfillfinish
- \gobble
-}
-
-% @smallformat (when @smallbook): @format plus smaller fonts.
-%
-\def\smallformatx{\begingroup
- \def\Esmallformat{\nonfillfinish\endgroup}%
- \indexfonts \rm
- \format
-}
-
-% @flushleft (same as @format).
-%
-\def\flushleft{\begingroup \def\Eflushleft{\nonfillfinish\endgroup}\format}
-
-% @flushright.
-%
-\def\flushright{\begingroup
- \let\nonarrowing = t
- \nonfillstart
- \let\Eflushright = \nonfillfinish
- \advance\leftskip by 0pt plus 1fill
- \gobble
-}
-
-% @quotation does normal linebreaking (hence we can't use \nonfillstart)
-% and narrows the margins.
-%
-\def\quotation{%
- \begingroup\inENV %This group ends at the end of the @quotation body
- {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
- \singlespace
- \parindent=0pt
- % We have retained a nonzero parskip for the environment, since we're
- % doing normal filling. So to avoid extra space below the environment...
- \def\Equotation{\parskip = 0pt \nonfillfinish}%
- %
- % @cartouche defines \nonarrowing to inhibit narrowing at next level down.
- \ifx\nonarrowing\relax
- \advance\leftskip by \lispnarrowing
- \advance\rightskip by \lispnarrowing
- \exdentamount = \lispnarrowing
- \let\nonarrowing = \relax
- \fi
-}
-
-
-\message{defuns,}
-% Define formatter for defuns
-% First, allow user to change definition object font (\df) internally
-\def\setdeffont #1 {\csname DEF#1\endcsname}
-
-\newskip\defbodyindent \defbodyindent=.4in
-\newskip\defargsindent \defargsindent=50pt
-\newskip\deftypemargin \deftypemargin=12pt
-\newskip\deflastargmargin \deflastargmargin=18pt
-
-\newcount\parencount
-% define \functionparens, which makes ( and ) and & do special things.
-% \functionparens affects the group it is contained in.
-\def\activeparens{%
-\catcode`\(=\active \catcode`\)=\active \catcode`\&=\active
-\catcode`\[=\active \catcode`\]=\active}
-
-% Make control sequences which act like normal parenthesis chars.
-\let\lparen = ( \let\rparen = )
-
-{\activeparens % Now, smart parens don't turn on until &foo (see \amprm)
-
-% Be sure that we always have a definition for `(', etc. For example,
-% if the fn name has parens in it, \boldbrax will not be in effect yet,
-% so TeX would otherwise complain about undefined control sequence.
-\global\let(=\lparen \global\let)=\rparen
-\global\let[=\lbrack \global\let]=\rbrack
-
-\gdef\functionparens{\boldbrax\let&=\amprm\parencount=0 }
-\gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb}
-% This is used to turn on special parens
-% but make & act ordinary (given that it's active).
-\gdef\boldbraxnoamp{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb\let&=\ampnr}
-
-% Definitions of (, ) and & used in args for functions.
-% This is the definition of ( outside of all parentheses.
-\gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested
- \global\advance\parencount by 1
-}
-%
-% This is the definition of ( when already inside a level of parens.
-\gdef\opnested{\char`\(\global\advance\parencount by 1 }
-%
-\gdef\clrm{% Print a paren in roman if it is taking us back to depth of 0.
- % also in that case restore the outer-level definition of (.
- \ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi
- \global\advance \parencount by -1 }
-% If we encounter &foo, then turn on ()-hacking afterwards
-\gdef\amprm#1 {{\rm\}\let(=\oprm \let)=\clrm\ }
-%
-\gdef\normalparens{\boldbrax\let&=\ampnr}
-} % End of definition inside \activeparens
-%% These parens (in \boldbrax) actually are a little bolder than the
-%% contained text. This is especially needed for [ and ]
-\def\opnr{{\sf\char`\(}\global\advance\parencount by 1 }
-\def\clnr{{\sf\char`\)}\global\advance\parencount by -1 }
-\def\ampnr{\&}
-\def\lbrb{{\bf\char`\[}}
-\def\rbrb{{\bf\char`\]}}
-
-% First, defname, which formats the header line itself.
-% #1 should be the function name.
-% #2 should be the type of definition, such as "Function".
-
-\def\defname #1#2{%
-% Get the values of \leftskip and \rightskip as they were
-% outside the @def...
-\dimen2=\leftskip
-\advance\dimen2 by -\defbodyindent
-\noindent
-\setbox0=\hbox{\hskip \deflastargmargin{\rm #2}\hskip \deftypemargin}%
-\dimen0=\hsize \advance \dimen0 by -\wd0 % compute size for first line
-\dimen1=\hsize \advance \dimen1 by -\defargsindent %size for continuations
-\parshape 2 0in \dimen0 \defargsindent \dimen1
-% Now output arg 2 ("Function" or some such)
-% ending at \deftypemargin from the right margin,
-% but stuck inside a box of width 0 so it does not interfere with linebreaking
-{% Adjust \hsize to exclude the ambient margins,
-% so that \rightline will obey them.
-\advance \hsize by -\dimen2
-\rlap{\rightline{{\rm #2}\hskip -1.25pc }}}%
-% Make all lines underfull and no complaints:
-\tolerance=10000 \hbadness=10000
-\advance\leftskip by -\defbodyindent
-\exdentamount=\defbodyindent
-{\df #1}\enskip % Generate function name
-}
-
-% Actually process the body of a definition
-% #1 should be the terminating control sequence, such as \Edefun.
-% #2 should be the "another name" control sequence, such as \defunx.
-% #3 should be the control sequence that actually processes the header,
-% such as \defunheader.
-
-\def\defparsebody #1#2#3{\begingroup\inENV% Environment for definitionbody
-\medbreak %
-% Define the end token that this defining construct specifies
-% so that it will exit this group.
-\def#1{\endgraf\endgroup\medbreak}%
-\def#2{\begingroup\obeylines\activeparens\spacesplit#3}%
-\parindent=0in
-\advance\leftskip by \defbodyindent
-\exdentamount=\defbodyindent
-\begingroup %
-\catcode 61=\active % 61 is `='
-\obeylines\activeparens\spacesplit#3}
-
-% #1 is the \E... control sequence to end the definition (which we define).
-% #2 is the \...x control sequence for consecutive fns (which we define).
-% #3 is the control sequence to call to resume processing.
-% #4, delimited by the space, is the class name.
-%
-\def\defmethparsebody#1#2#3#4 {\begingroup\inENV %
-\medbreak %
-% Define the end token that this defining construct specifies
-% so that it will exit this group.
-\def#1{\endgraf\endgroup\medbreak}%
-\def#2##1 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}}}%
-\parindent=0in
-\advance\leftskip by \defbodyindent
-\exdentamount=\defbodyindent
-\begingroup\obeylines\activeparens\spacesplit{#3{#4}}}
-
-% @deftypemethod has an extra argument that nothing else does. Sigh.
-% #1 is the \E... control sequence to end the definition (which we define).
-% #2 is the \...x control sequence for consecutive fns (which we define).
-% #3 is the control sequence to call to resume processing.
-% #4, delimited by the space, is the class name.
-% #5 is the method's return type.
-%
-\def\deftypemethparsebody#1#2#3#4 #5 {\begingroup\inENV %
-\medbreak %
-% Define the end token that this defining construct specifies
-% so that it will exit this group.
-\def#1{\endgraf\endgroup\medbreak}%
-\def#2##1 ##2 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}{##2}}}%
-\parindent=0in
-\advance\leftskip by \defbodyindent
-\exdentamount=\defbodyindent
-\begingroup\obeylines\activeparens\spacesplit{#3{#4}{#5}}}
-
-\def\defopparsebody #1#2#3#4#5 {\begingroup\inENV %
-\medbreak %
-% Define the end token that this defining construct specifies
-% so that it will exit this group.
-\def#1{\endgraf\endgroup\medbreak}%
-\def#2##1 ##2 {\def#4{##1}%
-\begingroup\obeylines\activeparens\spacesplit{#3{##2}}}%
-\parindent=0in
-\advance\leftskip by \defbodyindent
-\exdentamount=\defbodyindent
-\begingroup\obeylines\activeparens\spacesplit{#3{#5}}}
-
-% These parsing functions are similar to the preceding ones
-% except that they do not make parens into active characters.
-% These are used for "variables" since they have no arguments.
-
-\def\defvarparsebody #1#2#3{\begingroup\inENV% Environment for definitionbody
-\medbreak %
-% Define the end token that this defining construct specifies
-% so that it will exit this group.
-\def#1{\endgraf\endgroup\medbreak}%
-\def#2{\begingroup\obeylines\spacesplit#3}%
-\parindent=0in
-\advance\leftskip by \defbodyindent
-\exdentamount=\defbodyindent
-\begingroup %
-\catcode 61=\active %
-\obeylines\spacesplit#3}
-
-% This is used for \def{tp,vr}parsebody. It could probably be used for
-% some of the others, too, with some judicious conditionals.
-%
-\def\parsebodycommon#1#2#3{%
- \begingroup\inENV %
- \medbreak %
- % Define the end token that this defining construct specifies
- % so that it will exit this group.
- \def#1{\endgraf\endgroup\medbreak}%
- \def#2##1 {\begingroup\obeylines\spacesplit{#3{##1}}}%
- \parindent=0in
- \advance\leftskip by \defbodyindent
- \exdentamount=\defbodyindent
- \begingroup\obeylines
-}
-
-\def\defvrparsebody#1#2#3#4 {%
- \parsebodycommon{#1}{#2}{#3}%
- \spacesplit{#3{#4}}%
-}
-
-% This loses on `@deftp {Data Type} {struct termios}' -- it thinks the
-% type is just `struct', because we lose the braces in `{struct
-% termios}' when \spacesplit reads its undelimited argument. Sigh.
-% \let\deftpparsebody=\defvrparsebody
-%
-% So, to get around this, we put \empty in with the type name. That
-% way, TeX won't find exactly `{...}' as an undelimited argument, and
-% won't strip off the braces.
-%
-\def\deftpparsebody #1#2#3#4 {%
- \parsebodycommon{#1}{#2}{#3}%
- \spacesplit{\parsetpheaderline{#3{#4}}}\empty
-}
-
-% Fine, but then we have to eventually remove the \empty *and* the
-% braces (if any). That's what this does.
-%
-\def\removeemptybraces\empty#1\relax{#1}
-
-% After \spacesplit has done its work, this is called -- #1 is the final
-% thing to call, #2 the type name (which starts with \empty), and #3
-% (which might be empty) the arguments.
-%
-\def\parsetpheaderline#1#2#3{%
- #1{\removeemptybraces#2\relax}{#3}%
-}%
-
-\def\defopvarparsebody #1#2#3#4#5 {\begingroup\inENV %
-\medbreak %
-% Define the end token that this defining construct specifies
-% so that it will exit this group.
-\def#1{\endgraf\endgroup\medbreak}%
-\def#2##1 ##2 {\def#4{##1}%
-\begingroup\obeylines\spacesplit{#3{##2}}}%
-\parindent=0in
-\advance\leftskip by \defbodyindent
-\exdentamount=\defbodyindent
-\begingroup\obeylines\spacesplit{#3{#5}}}
-
-% Split up #2 at the first space token.
-% call #1 with two arguments:
-% the first is all of #2 before the space token,
-% the second is all of #2 after that space token.
-% If #2 contains no space token, all of it is passed as the first arg
-% and the second is passed as empty.
-
-{\obeylines
-\gdef\spacesplit#1#2^^M{\endgroup\spacesplitfoo{#1}#2 \relax\spacesplitfoo}%
-\long\gdef\spacesplitfoo#1#2 #3#4\spacesplitfoo{%
-\ifx\relax #3%
-#1{#2}{}\else #1{#2}{#3#4}\fi}}
-
-% So much for the things common to all kinds of definitions.
-
-% Define @defun.
-
-% First, define the processing that is wanted for arguments of \defun
-% Use this to expand the args and terminate the paragraph they make up
-
-\def\defunargs #1{\functionparens \sl
-% Expand, preventing hyphenation at `-' chars.
-% Note that groups don't affect changes in \hyphenchar.
-\hyphenchar\tensl=0
-#1%
-\hyphenchar\tensl=45
-\ifnum\parencount=0 \else \errmessage{Unbalanced parentheses in @def}\fi%
-\interlinepenalty=10000
-\advance\rightskip by 0pt plus 1fil
-\endgraf\nobreak\vskip -\parskip\nobreak
-}
-
-\def\deftypefunargs #1{%
-% Expand, preventing hyphenation at `-' chars.
-% Note that groups don't affect changes in \hyphenchar.
-% Use \boldbraxnoamp, not \functionparens, so that & is not special.
-\boldbraxnoamp
-\tclose{#1}% avoid \code because of side effects on active chars
-\interlinepenalty=10000
-\advance\rightskip by 0pt plus 1fil
-\endgraf\nobreak\vskip -\parskip\nobreak
-}
-
-% Do complete processing of one @defun or @defunx line already parsed.
-
-% @deffn Command forward-char nchars
-
-\def\deffn{\defmethparsebody\Edeffn\deffnx\deffnheader}
-
-\def\deffnheader #1#2#3{\doind {fn}{\code{#2}}%
-\begingroup\defname {#2}{#1}\defunargs{#3}\endgroup %
-\catcode 61=\other % Turn off change made in \defparsebody
-}
-
-% @defun == @deffn Function
-
-\def\defun{\defparsebody\Edefun\defunx\defunheader}
-
-\def\defunheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
-\begingroup\defname {#1}{Function}%
-\defunargs {#2}\endgroup %
-\catcode 61=\other % Turn off change made in \defparsebody
-}
-
-% @deftypefun int foobar (int @var{foo}, float @var{bar})
-
-\def\deftypefun{\defparsebody\Edeftypefun\deftypefunx\deftypefunheader}
-
-% #1 is the data type. #2 is the name and args.
-\def\deftypefunheader #1#2{\deftypefunheaderx{#1}#2 \relax}
-% #1 is the data type, #2 the name, #3 the args.
-\def\deftypefunheaderx #1#2 #3\relax{%
-\doind {fn}{\code{#2}}% Make entry in function index
-\begingroup\defname {\defheaderxcond#1\relax$$$#2}{Function}%
-\deftypefunargs {#3}\endgroup %
-\catcode 61=\other % Turn off change made in \defparsebody
-}
-
-% @deftypefn {Library Function} int foobar (int @var{foo}, float @var{bar})
-
-\def\deftypefn{\defmethparsebody\Edeftypefn\deftypefnx\deftypefnheader}
-
-% \defheaderxcond#1\relax$$$
-% puts #1 in @code, followed by a space, but does nothing if #1 is null.
-\def\defheaderxcond#1#2$$${\ifx#1\relax\else\code{#1#2} \fi}
-
-% #1 is the classification. #2 is the data type. #3 is the name and args.
-\def\deftypefnheader #1#2#3{\deftypefnheaderx{#1}{#2}#3 \relax}
-% #1 is the classification, #2 the data type, #3 the name, #4 the args.
-\def\deftypefnheaderx #1#2#3 #4\relax{%
-\doind {fn}{\code{#3}}% Make entry in function index
-\begingroup
-\normalparens % notably, turn off `&' magic, which prevents
-% at least some C++ text from working
-\defname {\defheaderxcond#2\relax$$$#3}{#1}%
-\deftypefunargs {#4}\endgroup %
-\catcode 61=\other % Turn off change made in \defparsebody
-}
-
-% @defmac == @deffn Macro
-
-\def\defmac{\defparsebody\Edefmac\defmacx\defmacheader}
-
-\def\defmacheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
-\begingroup\defname {#1}{Macro}%
-\defunargs {#2}\endgroup %
-\catcode 61=\other % Turn off change made in \defparsebody
-}
-
-% @defspec == @deffn Special Form
-
-\def\defspec{\defparsebody\Edefspec\defspecx\defspecheader}
-
-\def\defspecheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index
-\begingroup\defname {#1}{Special Form}%
-\defunargs {#2}\endgroup %
-\catcode 61=\other % Turn off change made in \defparsebody
-}
-
-% This definition is run if you use @defunx
-% anywhere other than immediately after a @defun or @defunx.
-
-\def\deffnx #1 {\errmessage{@deffnx in invalid context}}
-\def\defunx #1 {\errmessage{@defunx in invalid context}}
-\def\defmacx #1 {\errmessage{@defmacx in invalid context}}
-\def\defspecx #1 {\errmessage{@defspecx in invalid context}}
-\def\deftypefnx #1 {\errmessage{@deftypefnx in invalid context}}
-\def\deftypemethodx #1 {\errmessage{@deftypemethodx in invalid context}}
-\def\deftypefunx #1 {\errmessage{@deftypefunx in invalid context}}
-
-% @defmethod, and so on
-
-% @defop CATEGORY CLASS OPERATION ARG...
-
-\def\defop #1 {\def\defoptype{#1}%
-\defopparsebody\Edefop\defopx\defopheader\defoptype}
-
-\def\defopheader #1#2#3{%
-\dosubind {fn}{\code{#2}}{\putwordon\ #1}% Make entry in function index
-\begingroup\defname {#2}{\defoptype{} on #1}%
-\defunargs {#3}\endgroup %
-}
-
-% @deftypemethod CLASS RETURN-TYPE METHOD ARG...
-%
-\def\deftypemethod{%
- \deftypemethparsebody\Edeftypemethod\deftypemethodx\deftypemethodheader}
-%
-% #1 is the class name, #2 the data type, #3 the method name, #4 the args.
-\def\deftypemethodheader#1#2#3#4{%
- \dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index
- \begingroup
- \defname{\defheaderxcond#2\relax$$$#3}{\putwordMethodon\ \code{#1}}%
- \deftypefunargs{#4}%
- \endgroup
-}
-
-% @defmethod == @defop Method
-%
-\def\defmethod{\defmethparsebody\Edefmethod\defmethodx\defmethodheader}
-%
-% #1 is the class name, #2 the method name, #3 the args.
-\def\defmethodheader#1#2#3{%
- \dosubind{fn}{\code{#2}}{\putwordon\ \code{#1}}% entry in function index
- \begingroup
- \defname{#2}{\putwordMethodon\ \code{#1}}%
- \defunargs{#3}%
- \endgroup
-}
-
-% @defcv {Class Option} foo-class foo-flag
-
-\def\defcv #1 {\def\defcvtype{#1}%
-\defopvarparsebody\Edefcv\defcvx\defcvarheader\defcvtype}
-
-\def\defcvarheader #1#2#3{%
-\dosubind {vr}{\code{#2}}{of #1}% Make entry in var index
-\begingroup\defname {#2}{\defcvtype{} of #1}%
-\defvarargs {#3}\endgroup %
-}
-
-% @defivar == @defcv {Instance Variable}
-
-\def\defivar{\defvrparsebody\Edefivar\defivarx\defivarheader}
-
-\def\defivarheader #1#2#3{%
-\dosubind {vr}{\code{#2}}{of #1}% Make entry in var index
-\begingroup\defname {#2}{Instance Variable of #1}%
-\defvarargs {#3}\endgroup %
-}
-
-% These definitions are run if you use @defmethodx, etc.,
-% anywhere other than immediately after a @defmethod, etc.
-
-\def\defopx #1 {\errmessage{@defopx in invalid context}}
-\def\defmethodx #1 {\errmessage{@defmethodx in invalid context}}
-\def\defcvx #1 {\errmessage{@defcvx in invalid context}}
-\def\defivarx #1 {\errmessage{@defivarx in invalid context}}
-
-% Now @defvar
-
-% First, define the processing that is wanted for arguments of @defvar.
-% This is actually simple: just print them in roman.
-% This must expand the args and terminate the paragraph they make up
-\def\defvarargs #1{\normalparens #1%
-\interlinepenalty=10000
-\endgraf\nobreak\vskip -\parskip\nobreak}
-
-% @defvr Counter foo-count
-
-\def\defvr{\defvrparsebody\Edefvr\defvrx\defvrheader}
-
-\def\defvrheader #1#2#3{\doind {vr}{\code{#2}}%
-\begingroup\defname {#2}{#1}\defvarargs{#3}\endgroup}
-
-% @defvar == @defvr Variable
-
-\def\defvar{\defvarparsebody\Edefvar\defvarx\defvarheader}
-
-\def\defvarheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
-\begingroup\defname {#1}{Variable}%
-\defvarargs {#2}\endgroup %
-}
-
-% @defopt == @defvr {User Option}
-
-\def\defopt{\defvarparsebody\Edefopt\defoptx\defoptheader}
-
-\def\defoptheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index
-\begingroup\defname {#1}{User Option}%
-\defvarargs {#2}\endgroup %
-}
-
-% @deftypevar int foobar
-
-\def\deftypevar{\defvarparsebody\Edeftypevar\deftypevarx\deftypevarheader}
-
-% #1 is the data type. #2 is the name, perhaps followed by text that
-% is actually part of the data type, which should not be put into the index.
-\def\deftypevarheader #1#2{%
-\dovarind#2 \relax% Make entry in variables index
-\begingroup\defname {\defheaderxcond#1\relax$$$#2}{Variable}%
-\interlinepenalty=10000
-\endgraf\nobreak\vskip -\parskip\nobreak
-\endgroup}
-\def\dovarind#1 #2\relax{\doind{vr}{\code{#1}}}
-
-% @deftypevr {Global Flag} int enable
-
-\def\deftypevr{\defvrparsebody\Edeftypevr\deftypevrx\deftypevrheader}
-
-\def\deftypevrheader #1#2#3{\dovarind#3 \relax%
-\begingroup\defname {\defheaderxcond#2\relax$$$#3}{#1}
-\interlinepenalty=10000
-\endgraf\nobreak\vskip -\parskip\nobreak
-\endgroup}
-
-% This definition is run if you use @defvarx
-% anywhere other than immediately after a @defvar or @defvarx.
-
-\def\defvrx #1 {\errmessage{@defvrx in invalid context}}
-\def\defvarx #1 {\errmessage{@defvarx in invalid context}}
-\def\defoptx #1 {\errmessage{@defoptx in invalid context}}
-\def\deftypevarx #1 {\errmessage{@deftypevarx in invalid context}}
-\def\deftypevrx #1 {\errmessage{@deftypevrx in invalid context}}
-
-% Now define @deftp
-% Args are printed in bold, a slight difference from @defvar.
-
-\def\deftpargs #1{\bf \defvarargs{#1}}
-
-% @deftp Class window height width ...
-
-\def\deftp{\deftpparsebody\Edeftp\deftpx\deftpheader}
-
-\def\deftpheader #1#2#3{\doind {tp}{\code{#2}}%
-\begingroup\defname {#2}{#1}\deftpargs{#3}\endgroup}
-
-% This definition is run if you use @deftpx, etc
-% anywhere other than immediately after a @deftp, etc.
-
-\def\deftpx #1 {\errmessage{@deftpx in invalid context}}
-
-
-\message{macros,}
-% @macro.
-
-% To do this right we need a feature of e-TeX, \scantokens,
-% which we arrange to emulate with a temporary file in ordinary TeX.
-\ifx\eTeXversion\undefined
- \newwrite\macscribble
- \def\scanmacro#1{%
- \begingroup \newlinechar`\^^M
- \immediate\openout\macscribble=\jobname.tmp
- \immediate\write\macscribble{#1}%
- \immediate\closeout\macscribble
- \let\xeatspaces\eatspaces
- \input \jobname.tmp
- \endgroup
-}
-\else
-\def\scanmacro#1{%
-\begingroup \newlinechar`\^^M
-\let\xeatspaces\eatspaces\scantokens{#1}\endgroup}
-\fi
-
-\newcount\paramno % Count of parameters
-\newtoks\macname % Macro name
-\newif\ifrecursive % Is it recursive?
-
-% Utility routines.
-% Thisdoes \let #1 = #2, except with \csnames.
-\def\cslet#1#2{%
-\expandafter\expandafter
-\expandafter\let
-\expandafter\expandafter
-\csname#1\endcsname
-\csname#2\endcsname}
-
-% Trim leading and trailing spaces off a string.
-% Concepts from aro-bend problem 15 (see CTAN).
-{\catcode`\@=11
-\gdef\eatspaces #1{\expandafter\trim@\expandafter{#1 }}
-\gdef\trim@ #1{\trim@@ @#1 @ #1 @ @@}
-\gdef\trim@@ #1@ #2@ #3@@{\trim@@@\empty #2 @}
-\def\unbrace#1{#1}
-\unbrace{\gdef\trim@@@ #1 } #2@{#1}
-}
-
-% Trim a single trailing ^^M off a string.
-{\catcode`\^^M=12\catcode`\Q=3%
-\gdef\eatcr #1{\eatcra #1Q^^MQ}%
-\gdef\eatcra#1^^MQ{\eatcrb#1Q}%
-\gdef\eatcrb#1Q#2Q{#1}%
-}
-
-% Macro bodies are absorbed as an argument in a context where
-% all characters are catcode 10, 11 or 12, except \ which is active
-% (as in normal texinfo). It is necessary to change the definition of \.
-
-% It's necessary to have hard CRs when the macro is executed. This is
-% done by making ^^M (\endlinechar) catcode 12 when reading the macro
-% body, and then making it the \newlinechar in \scanmacro.
-
-\def\macrobodyctxt{%
- \catcode`\~=12
- \catcode`\^=12
- \catcode`\_=12
- \catcode`\|=12
- \catcode`\<=12
- \catcode`\>=12
- \catcode`\+=12
- \catcode`\{=12
- \catcode`\}=12
- \catcode`\@=12
- \catcode`\^^M=12
- \usembodybackslash}
-
-\def\macroargctxt{%
- \catcode`\~=12
- \catcode`\^=12
- \catcode`\_=12
- \catcode`\|=12
- \catcode`\<=12
- \catcode`\>=12
- \catcode`\+=12
- \catcode`\@=12
- \catcode`\\=12}
-
-% \mbodybackslash is the definition of \ in @macro bodies.
-% It maps \foo\ => \csname macarg.foo\endcsname => #N
-% where N is the macro parameter number.
-% We define \csname macarg.\endcsname to be \realbackslash, so
-% \\ in macro replacement text gets you a backslash.
-
-{\catcode`@=0 @catcode`@\=@active
- @gdef@usembodybackslash{@let\=@mbodybackslash}
- @gdef@mbodybackslash#1\{@csname macarg.#1@endcsname}
-}
-\expandafter\def\csname macarg.\endcsname{\realbackslash}
-
-\def\macro{\recursivefalse\parsearg\macroxxx}
-\def\rmacro{\recursivetrue\parsearg\macroxxx}
-
-\def\macroxxx#1{%
- \getargs{#1}% now \macname is the macname and \argl the arglist
- \ifx\argl\empty % no arguments
- \paramno=0%
- \else
- \expandafter\parsemargdef \argl;%
- \fi
- \expandafter\ifx \csname macsave.\the\macname\endcsname \relax
- \cslet{macsave.\the\macname}{\the\macname}%
- \else
- \message{Warning: redefining \the\macname}%
- \fi
- \begingroup \macrobodyctxt
- \ifrecursive \expandafter\parsermacbody
- \else \expandafter\parsemacbody
- \fi}
-
-\def\unmacro{\parsearg\unmacroxxx}
-\def\unmacroxxx#1{%
- \expandafter\ifx \csname macsave.\the\macname\endcsname \relax
- \errmessage{Macro \the\macname\ not defined.}%
- \else
- \cslet{#1}{macsave.#1}%
- \expandafter\let \csname macsave.\the\macname\endcsname \undefined
- \fi
-}
-
-% This makes use of the obscure feature that if the last token of a
-% <parameter list> is #, then the preceding argument is delimited by
-% an opening brace, and that opening brace is not consumed.
-\def\getargs#1{\getargsxxx#1{}}
-\def\getargsxxx#1#{\getmacname #1 \relax\getmacargs}
-\def\getmacname #1 #2\relax{\macname={#1}}
-\def\getmacargs#1{\def\argl{#1}}
-
-% Parse the optional {params} list. Set up \paramno and \paramlist
-% so \defmacro knows what to do. Define \macarg.blah for each blah
-% in the params list, to be ##N where N is the position in that list.
-% That gets used by \mbodybackslash (above).
-
-% We need to get `macro parameter char #' into several definitions.
-% The technique used is stolen from LaTeX: let \hash be something
-% unexpandable, insert that wherever you need a #, and then redefine
-% it to # just before using the token list produced.
-%
-% The same technique is used to protect \eatspaces till just before
-% the macro is used.
-
-\def\parsemargdef#1;{\paramno=0\def\paramlist{}%
- \let\hash\relax\let\xeatspaces\relax\parsemargdefxxx#1,;,}
-\def\parsemargdefxxx#1,{%
- \if#1;\let\next=\relax
- \else \let\next=\parsemargdefxxx
- \advance\paramno by 1%
- \expandafter\edef\csname macarg.\eatspaces{#1}\endcsname
- {\xeatspaces{\hash\the\paramno}}%
- \edef\paramlist{\paramlist\hash\the\paramno,}%
- \fi\next}
-
-% These two commands read recursive and nonrecursive macro bodies.
-% (They're different since rec and nonrec macros end differently.)
-
-\long\def\parsemacbody#1@end macro%
-{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
-\long\def\parsermacbody#1@end rmacro%
-{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
-
-% This defines the macro itself. There are six cases: recursive and
-% nonrecursive macros of zero, one, and many arguments.
-% Much magic with \expandafter here.
-% \xdef is used so that macro definitions will survive the file
-% they're defined in; @include reads the file inside a group.
-\def\defmacro{%
- \let\hash=##% convert placeholders to macro parameter chars
- \ifrecursive
- \ifcase\paramno
- % 0
- \expandafter\xdef\csname\the\macname\endcsname{%
- \noexpand\scanmacro{\temp}}%
- \or % 1
- \expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup\noexpand\macroargctxt
- \noexpand\braceorline\csname\the\macname xxx\endcsname}%
- \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
- \egroup\noexpand\scanmacro{\temp}}%
- \else % many
- \expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup\noexpand\macroargctxt
- \noexpand\csname\the\macname xx\endcsname}
- \expandafter\xdef\csname\the\macname xx\endcsname##1{%
- \csname\the\macname xxx\endcsname ##1,}%
- \expandafter\expandafter
- \expandafter\xdef
- \expandafter\expandafter
- \csname\the\macname xxx\endcsname
- \paramlist{\egroup\noexpand\scanmacro{\temp}}%
- \fi
- \else
- \ifcase\paramno
- % 0
- \expandafter\xdef\csname\the\macname\endcsname{%
- \noexpand\norecurse{\the\macname}%
- \noexpand\scanmacro{\temp}\egroup}%
- \or % 1
- \expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup\noexpand\macroargctxt
- \noexpand\braceorline\csname\the\macname xxx\endcsname}%
- \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
- \egroup
- \noexpand\norecurse{\the\macname}%
- \noexpand\scanmacro{\temp}\egroup}%
- \else % many
- \expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup\noexpand\macroargctxt
- \noexpand\csname\the\macname xx\endcsname}
- \expandafter\xdef\csname\the\macname xx\endcsname##1{%
- \csname\the\macname xxx\endcsname ##1,}%
- \expandafter\expandafter
- \expandafter\xdef
- \expandafter\expandafter
- \csname\the\macname xxx\endcsname
- \paramlist{%
- \egroup
- \noexpand\norecurse{\the\macname}%
- \noexpand\scanmacro{\temp}\egroup}%
- \fi
- \fi}
-
-\def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}}
-
-% \braceorline decides whether the next nonwhitespace character is a
-% {. If so it reads up to the closing }, if not, it reads the whole
-% line. Whatever was read is then fed to the next control sequence
-% as an argument (by \parsebrace or \parsearg)
-\def\braceorline#1{\let\next=#1\futurelet\nchar\braceorlinexxx}
-\def\braceorlinexxx{%
- \ifx\nchar\bgroup\else
- \expandafter\parsearg
- \fi \next}
-
-
-\message{cross references,}
-\newwrite\auxfile
-
-\newif\ifhavexrefs % True if xref values are known.
-\newif\ifwarnedxrefs % True if we warned once that they aren't known.
-
-% @inforef is relatively simple.
-\def\inforef #1{\inforefzzz #1,,,,**}
-\def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
- node \samp{\ignorespaces#1{}}}
-
-% @node's job is to define \lastnode.
-\def\node{\ENVcheck\parsearg\nodezzz}
-\def\nodezzz#1{\nodexxx [#1,]}
-\def\nodexxx[#1,#2]{\gdef\lastnode{#1}}
-\let\nwnode=\node
-\let\lastnode=\relax
-
-% The sectioning commands (@chapter, etc.) call these.
-\def\donoderef{%
- \ifx\lastnode\relax\else
- \expandafter\expandafter\expandafter\setref{\lastnode}%
- {Ysectionnumberandtype}%
- \global\let\lastnode=\relax
- \fi
-}
-\def\unnumbnoderef{%
- \ifx\lastnode\relax\else
- \expandafter\expandafter\expandafter\setref{\lastnode}{Ynothing}%
- \global\let\lastnode=\relax
- \fi
-}
-\def\appendixnoderef{%
- \ifx\lastnode\relax\else
- \expandafter\expandafter\expandafter\setref{\lastnode}%
- {Yappendixletterandtype}%
- \global\let\lastnode=\relax
- \fi
-}
-
-
-% @anchor{NAME} -- define xref target at arbitrary point.
-%
-\def\anchor#1{\setref{#1}{Ynothing}}
-
-
-% \setref{NAME}{SNT} defines a cross-reference point NAME, namely
-% NAME-title, NAME-pg, and NAME-SNT. Called from \foonoderef. We have
-% to set \indexdummies so commands such as @code in a section title
-% aren't expanded. It would be nicer not to expand the titles in the
-% first place, but there's so many layers that that is hard to do.
-%
-\def\setref#1#2{{%
- \indexdummies
- \dosetq{#1-title}{Ytitle}%
- \dosetq{#1-pg}{Ypagenumber}%
- \dosetq{#1-snt}{#2}
-}}
-
-% @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is
-% the node name, #2 the name of the Info cross-reference, #3 the printed
-% node name, #4 the name of the Info file, #5 the name of the printed
-% manual. All but the node name can be omitted.
-%
-\def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]}
-\def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]}
-\def\ref#1{\xrefX[#1,,,,,,,]}
-\def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
- \def\printedmanual{\ignorespaces #5}%
- \def\printednodename{\ignorespaces #3}%
- \setbox1=\hbox{\printedmanual}%
- \setbox0=\hbox{\printednodename}%
- \ifdim \wd0 = 0pt
- % No printed node name was explicitly given.
- \expandafter\ifx\csname SETxref-automatic-section-title\endcsname\relax
- % Use the node name inside the square brackets.
- \def\printednodename{\ignorespaces #1}%
- \else
- % Use the actual chapter/section title appear inside
- % the square brackets. Use the real section title if we have it.
- \ifdim \wd1 > 0pt
- % It is in another manual, so we don't have it.
- \def\printednodename{\ignorespaces #1}%
- \else
- \ifhavexrefs
- % We know the real title if we have the xref values.
- \def\printednodename{\refx{#1-title}{}}%
- \else
- % Otherwise just copy the Info node name.
- \def\printednodename{\ignorespaces #1}%
- \fi%
- \fi
- \fi
- \fi
- %
- % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not
- % insert empty discretionaries after hyphens, which means that it will
- % not find a line break at a hyphen in a node names. Since some manuals
- % are best written with fairly long node names, containing hyphens, this
- % is a loss. Therefore, we give the text of the node name again, so it
- % is as if TeX is seeing it for the first time.
- \ifdim \wd1 > 0pt
- \putwordsection{} ``\printednodename'' in \cite{\printedmanual}%
- \else
- % _ (for example) has to be the character _ for the purposes of the
- % control sequence corresponding to the node, but it has to expand
- % into the usual \leavevmode...\vrule stuff for purposes of
- % printing. So we \turnoffactive for the \refx-snt, back on for the
- % printing, back off for the \refx-pg.
- {\normalturnoffactive
- % Only output a following space if the -snt ref is nonempty; for
- % @unnumbered and @anchor, it won't be.
- \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
- \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
- }%
- % [mynode],
- [\printednodename],\space
- % page 3
- \turnoffactive \putwordpage\tie\refx{#1-pg}{}%
- \fi
-\endgroup}
-
-% \dosetq is the interface for calls from other macros
-
-% Use \normalturnoffactive so that punctuation chars such as underscore
-% and backslash work in node names. (\turnoffactive doesn't do \.)
-\def\dosetq#1#2{%
- {\let\folio=0
- \normalturnoffactive
- \edef\next{\write\auxfile{\internalsetq{#1}{#2}}}%
- \iflinks
- \next
- \fi
- }%
-}
-
-% \internalsetq {foo}{page} expands into
-% CHARACTERS 'xrdef {foo}{...expansion of \Ypage...}
-% When the aux file is read, ' is the escape character
-
-\def\internalsetq #1#2{'xrdef {#1}{\csname #2\endcsname}}
-
-% Things to be expanded by \internalsetq
-
-\def\Ypagenumber{\folio}
-
-\def\Ytitle{\thissection}
-
-\def\Ynothing{}
-
-\def\Ysectionnumberandtype{%
-\ifnum\secno=0 \putwordChapter\xreftie\the\chapno %
-\else \ifnum \subsecno=0 \putwordSection\xreftie\the\chapno.\the\secno %
-\else \ifnum \subsubsecno=0 %
-\putwordSection\xreftie\the\chapno.\the\secno.\the\subsecno %
-\else %
-\putwordSection\xreftie\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno %
-\fi \fi \fi }
-
-\def\Yappendixletterandtype{%
-\ifnum\secno=0 \putwordAppendix\xreftie'char\the\appendixno{}%
-\else \ifnum \subsecno=0 \putwordSection\xreftie'char\the\appendixno.\the\secno %
-\else \ifnum \subsubsecno=0 %
-\putwordSection\xreftie'char\the\appendixno.\the\secno.\the\subsecno %
-\else %
-\putwordSection\xreftie'char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno %
-\fi \fi \fi }
-
-\gdef\xreftie{'tie}
-
-% Use TeX 3.0's \inputlineno to get the line number, for better error
-% messages, but if we're using an old version of TeX, don't do anything.
-%
-\ifx\inputlineno\thisisundefined
- \let\linenumber = \empty % Non-3.0.
-\else
- \def\linenumber{\the\inputlineno:\space}
-\fi
-
-% Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME.
-% If its value is nonempty, SUFFIX is output afterward.
-
-\def\refx#1#2{%
- \expandafter\ifx\csname X#1\endcsname\relax
- % If not defined, say something at least.
- \angleleft un\-de\-fined\angleright
- \iflinks
- \ifhavexrefs
- \message{\linenumber Undefined cross reference `#1'.}%
- \else
- \ifwarnedxrefs\else
- \global\warnedxrefstrue
- \message{Cross reference values unknown; you must run TeX again.}%
- \fi
- \fi
- \fi
- \else
- % It's defined, so just use it.
- \csname X#1\endcsname
- \fi
- #2% Output the suffix in any case.
-}
-
-% This is the macro invoked by entries in the aux file.
-%
-\def\xrdef#1{\begingroup
- % Reenable \ as an escape while reading the second argument.
- \catcode`\\ = 0
- \afterassignment\endgroup
- \expandafter\gdef\csname X#1\endcsname
-}
-
-% Read the last existing aux file, if any. No error if none exists.
-\def\readauxfile{\begingroup
- \catcode`\^^@=\other
- \catcode`\^^A=\other
- \catcode`\^^B=\other
- \catcode`\^^C=\other
- \catcode`\^^D=\other
- \catcode`\^^E=\other
- \catcode`\^^F=\other
- \catcode`\^^G=\other
- \catcode`\^^H=\other
- \catcode`\^^K=\other
- \catcode`\^^L=\other
- \catcode`\^^N=\other
- \catcode`\^^P=\other
- \catcode`\^^Q=\other
- \catcode`\^^R=\other
- \catcode`\^^S=\other
- \catcode`\^^T=\other
- \catcode`\^^U=\other
- \catcode`\^^V=\other
- \catcode`\^^W=\other
- \catcode`\^^X=\other
- \catcode`\^^Z=\other
- \catcode`\^^[=\other
- \catcode`\^^\=\other
- \catcode`\^^]=\other
- \catcode`\^^^=\other
- \catcode`\^^_=\other
- \catcode`\@=\other
- \catcode`\^=\other
- % It was suggested to define this as 7, which would allow ^^e4 etc.
- % in xref tags, i.e., node names. But since ^^e4 notation isn't
- % supported in the main text, it doesn't seem desirable. Furthermore,
- % that is not enough: for node names that actually contain a ^
- % character, we would end up writing a line like this: 'xrdef {'hat
- % b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first
- % argument, and \hat is not an expandable control sequence. It could
- % all be worked out, but why? Either we support ^^ or we don't.
- %
- % The other change necessary for this was to define \auxhat:
- % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter
- % and then to call \auxhat in \setq.
- %
- \catcode`\~=\other
- \catcode`\[=\other
- \catcode`\]=\other
- \catcode`\"=\other
- \catcode`\_=\other
- \catcode`\|=\other
- \catcode`\<=\other
- \catcode`\>=\other
- \catcode`\$=\other
- \catcode`\#=\other
- \catcode`\&=\other
- \catcode`+=\other % avoid \+ for paranoia even though we've turned it off
- % Make the characters 128-255 be printing characters
- {%
- \count 1=128
- \def\loop{%
- \catcode\count 1=\other
- \advance\count 1 by 1
- \ifnum \count 1<256 \loop \fi
- }%
- }%
- % The aux file uses ' as the escape (for now).
- % Turn off \ as an escape so we do not lose on
- % entries which were dumped with control sequences in their names.
- % For example, 'xrdef {$\leq $-fun}{page ...} made by @defun ^^
- % Reference to such entries still does not work the way one would wish,
- % but at least they do not bomb out when the aux file is read in.
- \catcode`\{=1
- \catcode`\}=2
- \catcode`\%=\other
- \catcode`\'=0
- \catcode`\\=\other
- %
- \openin 1 \jobname.aux
- \ifeof 1 \else
- \closein 1
- \input \jobname.aux
- \global\havexrefstrue
- \global\warnedobstrue
- \fi
- % Open the new aux file. TeX will close it automatically at exit.
- \openout\auxfile=\jobname.aux
-\endgroup}
-
-
-% Footnotes.
-
-\newcount \footnoteno
-
-% The trailing space in the following definition for supereject is
-% vital for proper filling; pages come out unaligned when you do a
-% pagealignmacro call if that space before the closing brace is
-% removed. (Generally, numeric constants should always be followed by a
-% space to prevent strange expansion errors.)
-\def\supereject{\par\penalty -20000\footnoteno =0 }
-
-% @footnotestyle is meaningful for info output only.
-\let\footnotestyle=\comment
-
-\let\ptexfootnote=\footnote
-
-{\catcode `\@=11
-%
-% Auto-number footnotes. Otherwise like plain.
-\gdef\footnote{%
- \global\advance\footnoteno by \@ne
- \edef\thisfootno{$^{\the\footnoteno}$}%
- %
- % In case the footnote comes at the end of a sentence, preserve the
- % extra spacing after we do the footnote number.
- \let\@sf\empty
- \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\/\fi
- %
- % Remove inadvertent blank space before typesetting the footnote number.
- \unskip
- \thisfootno\@sf
- \footnotezzz
-}%
-
-% Don't bother with the trickery in plain.tex to not require the
-% footnote text as a parameter. Our footnotes don't need to be so general.
-%
-% Oh yes, they do; otherwise, @ifset and anything else that uses
-% \parseargline fail inside footnotes because the tokens are fixed when
-% the footnote is read. --karl, 16nov96.
-%
-\long\gdef\footnotezzz{\insert\footins\bgroup
- % We want to typeset this text as a normal paragraph, even if the
- % footnote reference occurs in (for example) a display environment.
- % So reset some parameters.
- \interlinepenalty\interfootnotelinepenalty
- \splittopskip\ht\strutbox % top baseline for broken footnotes
- \splitmaxdepth\dp\strutbox
- \floatingpenalty\@MM
- \leftskip\z@skip
- \rightskip\z@skip
- \spaceskip\z@skip
- \xspaceskip\z@skip
- \parindent\defaultparindent
- %
- % Hang the footnote text off the number.
- \hang
- \textindent{\thisfootno}%
- %
- % Don't crash into the line above the footnote text. Since this
- % expands into a box, it must come within the paragraph, lest it
- % provide a place where TeX can split the footnote.
- \footstrut
- \futurelet\next\fo@t
-}
-\def\fo@t{\ifcat\bgroup\noexpand\next \let\next\f@@t
- \else\let\next\f@t\fi \next}
-\def\f@@t{\bgroup\aftergroup\@foot\let\next}
-\def\f@t#1{#1\@foot}
-\def\@foot{\strut\egroup}
-
-}%end \catcode `\@=11
-
-% Set the baselineskip to #1, and the lineskip and strut size
-% correspondingly. There is no deep meaning behind these magic numbers
-% used as factors; they just match (closely enough) what Knuth defined.
-%
-\def\lineskipfactor{.08333}
-\def\strutheightpercent{.70833}
-\def\strutdepthpercent {.29167}
-%
-\def\setleading#1{%
- \normalbaselineskip = #1\relax
- \normallineskip = \lineskipfactor\normalbaselineskip
- \normalbaselines
- \setbox\strutbox =\hbox{%
- \vrule width0pt height\strutheightpercent\baselineskip
- depth \strutdepthpercent \baselineskip
- }%
-}
-
-% @| inserts a changebar to the left of the current line. It should
-% surround any changed text. This approach does *not* work if the
-% change spans more than two lines of output. To handle that, we would
-% have adopt a much more difficult approach (putting marks into the main
-% vertical list for the beginning and end of each change).
-%
-\def\|{%
- % \vadjust can only be used in horizontal mode.
- \leavevmode
- %
- % Append this vertical mode material after the current line in the output.
- \vadjust{%
- % We want to insert a rule with the height and depth of the current
- % leading; that is exactly what \strutbox is supposed to record.
- \vskip-\baselineskip
- %
- % \vadjust-items are inserted at the left edge of the type. So
- % the \llap here moves out into the left-hand margin.
- \llap{%
- %
- % For a thicker or thinner bar, change the `1pt'.
- \vrule height\baselineskip width1pt
- %
- % This is the space between the bar and the text.
- \hskip 12pt
- }%
- }%
-}
-
-% For a final copy, take out the rectangles
-% that mark overfull boxes (in case you have decided
-% that the text looks ok even though it passes the margin).
-%
-\def\finalout{\overfullrule=0pt}
-
-% @image. We use the macros from epsf.tex to support this.
-% If epsf.tex is not installed and @image is used, we complain.
-%
-% Check for and read epsf.tex up front. If we read it only at @image
-% time, we might be inside a group, and then its definitions would get
-% undone and the next image would fail.
-\openin 1 = epsf.tex
-\ifeof 1 \else
- \closein 1
- % Do not bother showing banner with post-v2.7 epsf.tex (available in
- % doc/epsf.tex until it shows up on ctan).
- \def\epsfannounce{\toks0 = }%
- \input epsf.tex
-\fi
-%
-\newif\ifwarnednoepsf
-\newhelp\noepsfhelp{epsf.tex must be installed for images to
- work. It is also included in the Texinfo distribution, or you can get
- it from ftp://ftp.tug.org/tex/epsf.tex.}
-%
-% Only complain once about lack of epsf.tex.
-\def\image#1{%
- \ifx\epsfbox\undefined
- \ifwarnednoepsf \else
- \errhelp = \noepsfhelp
- \errmessage{epsf.tex not found, images will be ignored}%
- \global\warnednoepsftrue
- \fi
- \else
- \imagexxx #1,,,\finish
- \fi
-}
-%
-% Arguments to @image:
-% #1 is (mandatory) image filename; we tack on .eps extension.
-% #2 is (optional) width, #3 is (optional) height.
-% #4 is just the usual extra ignored arg for parsing this stuff.
-\def\imagexxx#1,#2,#3,#4\finish{%
- % \epsfbox itself resets \epsf?size at each figure.
- \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi
- \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi
- % If the image is by itself, center it.
- \ifvmode
- \nobreak\medskip
- \nobreak
- \centerline{\epsfbox{#1.eps}}%
- \bigbreak
- \else
- \epsfbox{#1.eps}%
- \fi
-}
-
-
-\message{paper sizes,}
-% And other related parameters.
-
-\newdimen\defaultparindent \defaultparindent = 15pt
-
-\chapheadingskip = 15pt plus 4pt minus 2pt
-\secheadingskip = 12pt plus 3pt minus 2pt
-\subsecheadingskip = 9pt plus 2pt minus 2pt
-
-% Prevent underfull vbox error messages.
-\vbadness = 10000
-
-% Don't be so finicky about underfull hboxes, either.
-\hbadness = 2000
-
-% Following George Bush, just get rid of widows and orphans.
-\widowpenalty=10000
-\clubpenalty=10000
-
-% Use TeX 3.0's \emergencystretch to help line breaking, but if we're
-% using an old version of TeX, don't do anything. We want the amount of
-% stretch added to depend on the line length, hence the dependence on
-% \hsize. This makes it come to about 9pt for the 8.5x11 format. We
-% call this whenever the paper size is set.
-%
-\def\setemergencystretch{%
- \ifx\emergencystretch\thisisundefined
- % Allow us to assign to \emergencystretch anyway.
- \def\emergencystretch{\dimen0}%
- \else
- \emergencystretch = \hsize
- \divide\emergencystretch by 45
- \fi
-}
-
-% Parameters in order: 1) textheight; 2) textwidth; 3) voffset;
-% 4) hoffset; 5) binding offset; 6) topskip. Then whoever calls us can
-% set \parskip and call \setleading for \baselineskip.
-%
-\def\internalpagesizes#1#2#3#4#5#6{%
- \voffset = #3\relax
- \topskip = #6\relax
- \splittopskip = \topskip
- %
- \vsize = #1\relax
- \advance\vsize by \topskip
- \outervsize = \vsize
- \advance\outervsize by 2\topandbottommargin
- \pageheight = \vsize
- %
- \hsize = #2\relax
- \outerhsize = \hsize
- \advance\outerhsize by 0.5in
- \pagewidth = \hsize
- %
- \normaloffset = #4\relax
- \bindingoffset = #5\relax
- %
- \parindent = \defaultparindent
- \setemergencystretch
-}
-
-% @letterpaper (the default).
-\def\letterpaper{{\globaldefs = 1
- \parskip = 3pt plus 2pt minus 1pt
- \setleading{13.2pt}%
- %
- % If page is nothing but text, make it come out even.
- \internalpagesizes{46\baselineskip}{6in}{\voffset}{.25in}{\bindingoffset}{36pt}%
-}}
-
-% Use @smallbook to reset parameters for 7x9.5 (or so) format.
-\def\smallbook{{\globaldefs = 1
- \parskip = 2pt plus 1pt
- \setleading{12pt}%
- %
- \internalpagesizes{7.5in}{5.in}{\voffset}{.25in}{\bindingoffset}{16pt}%
- %
- \lispnarrowing = 0.3in
- \tolerance = 700
- \hfuzz = 1pt
- \contentsrightmargin = 0pt
- \deftypemargin = 0pt
- \defbodyindent = .5cm
- %
- \let\smalldisplay = \smalldisplayx
- \let\smallexample = \smalllispx
- \let\smallformat = \smallformatx
- \let\smalllisp = \smalllispx
-}}
-
-% Use @afourpaper to print on European A4 paper.
-\def\afourpaper{{\globaldefs = 1
- \setleading{12pt}%
- \parskip = 3pt plus 2pt minus 1pt
- %
- \internalpagesizes{53\baselineskip}{160mm}{\voffset}{4mm}{\bindingoffset}{44pt}%
- %
- \tolerance = 700
- \hfuzz = 1pt
-}}
-
-% A specific text layout, 24x15cm overall, intended for A4 paper. Top margin
-% 29mm, hence bottom margin 28mm, nominal side margin 3cm.
-\def\afourlatex{{\globaldefs = 1
- \setleading{13.6pt}%
- %
- \afourpaper
- \internalpagesizes{237mm}{150mm}{3.6mm}{3.6mm}{3mm}{7mm}%
- %
- \globaldefs = 0
-}}
-
-% Use @afourwide to print on European A4 paper in wide format.
-\def\afourwide{%
- \afourpaper
- \internalpagesizes{9.5in}{6.5in}{\hoffset}{\normaloffset}{\bindingoffset}{7mm}%
- %
- \globaldefs = 0
-}
-
-% @pagesizes TEXTHEIGHT[,TEXTWIDTH]
-% Perhaps we should allow setting the margins, \topskip, \parskip,
-% and/or leading, also. Or perhaps we should compute them somehow.
-%
-\def\pagesizes{\parsearg\pagesizesxxx}
-\def\pagesizesxxx#1{\pagesizesyyy #1,,\finish}
-\def\pagesizesyyy#1,#2,#3\finish{{%
- \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi
- \globaldefs = 1
- %
- \parskip = 3pt plus 2pt minus 1pt
- \setleading{13.2pt}%
- %
- \internalpagesizes{#1}{\hsize}{\voffset}{\normaloffset}{\bindingoffset}{44pt}%
-}}
-
-% Set default to letter.
-%
-\letterpaper
-
-\message{and turning on texinfo input format.}
-
-% Define macros to output various characters with catcode for normal text.
-\catcode`\"=\other
-\catcode`\~=\other
-\catcode`\^=\other
-\catcode`\_=\other
-\catcode`\|=\other
-\catcode`\<=\other
-\catcode`\>=\other
-\catcode`\+=\other
-\def\normaldoublequote{"}
-\def\normaltilde{~}
-\def\normalcaret{^}
-\def\normalunderscore{_}
-\def\normalverticalbar{|}
-\def\normalless{<}
-\def\normalgreater{>}
-\def\normalplus{+}
-
-% This macro is used to make a character print one way in ttfont
-% where it can probably just be output, and another way in other fonts,
-% where something hairier probably needs to be done.
-%
-% #1 is what to print if we are indeed using \tt; #2 is what to print
-% otherwise. Since all the Computer Modern typewriter fonts have zero
-% interword stretch (and shrink), and it is reasonable to expect all
-% typewriter fonts to have this, we can check that font parameter.
-%
-\def\ifusingtt#1#2{\ifdim \fontdimen3\the\font=0pt #1\else #2\fi}
-
-% Turn off all special characters except @
-% (and those which the user can use as if they were ordinary).
-% Most of these we simply print from the \tt font, but for some, we can
-% use math or other variants that look better in normal text.
-
-\catcode`\"=\active
-\def\activedoublequote{{\tt\char34}}
-\let"=\activedoublequote
-\catcode`\~=\active
-\def~{{\tt\char126}}
-\chardef\hat=`\^
-\catcode`\^=\active
-\def^{{\tt \hat}}
-
-\catcode`\_=\active
-\def_{\ifusingtt\normalunderscore\_}
-% Subroutine for the previous macro.
-\def\_{\leavevmode \kern.06em \vbox{\hrule width.3em height.1ex}}
-
-\catcode`\|=\active
-\def|{{\tt\char124}}
-\chardef \less=`\<
-\catcode`\<=\active
-\def<{{\tt \less}}
-\chardef \gtr=`\>
-\catcode`\>=\active
-\def>{{\tt \gtr}}
-\catcode`\+=\active
-\def+{{\tt \char 43}}
-%\catcode 27=\active
-%\def^^[{$\diamondsuit$}
-
-% Set up an active definition for =, but don't enable it most of the time.
-{\catcode`\==\active
-\global\def={{\tt \char 61}}}
-
-\catcode`+=\active
-\catcode`\_=\active
-
-% If a .fmt file is being used, characters that might appear in a file
-% name cannot be active until we have parsed the command line.
-% So turn them off again, and have \everyjob (or @setfilename) turn them on.
-% \otherifyactive is called near the end of this file.
-\def\otherifyactive{\catcode`+=\other \catcode`\_=\other}
-
-\catcode`\@=0
-
-% \rawbackslashxx output one backslash character in current font
-\global\chardef\rawbackslashxx=`\\
-%{\catcode`\\=\other
-%@gdef@rawbackslashxx{\}}
-
-% \rawbackslash redefines \ as input to do \rawbackslashxx.
-{\catcode`\\=\active
-@gdef@rawbackslash{@let\=@rawbackslashxx }}
-
-% \normalbackslash outputs one backslash in fixed width font.
-\def\normalbackslash{{\tt\rawbackslashxx}}
-
-% Say @foo, not \foo, in error messages.
-\escapechar=`\@
-
-% \catcode 17=0 % Define control-q
-\catcode`\\=\active
-
-% Used sometimes to turn off (effectively) the active characters
-% even after parsing them.
-@def@turnoffactive{@let"=@normaldoublequote
-@let\=@realbackslash
-@let~=@normaltilde
-@let^=@normalcaret
-@let_=@normalunderscore
-@let|=@normalverticalbar
-@let<=@normalless
-@let>=@normalgreater
-@let+=@normalplus}
-
-@def@normalturnoffactive{@let"=@normaldoublequote
-@let\=@normalbackslash
-@let~=@normaltilde
-@let^=@normalcaret
-@let_=@normalunderscore
-@let|=@normalverticalbar
-@let<=@normalless
-@let>=@normalgreater
-@let+=@normalplus}
-
-% Make _ and + \other characters, temporarily.
-% This is canceled by @fixbackslash.
-@otherifyactive
-
-% If a .fmt file is being used, we don't want the `\input texinfo' to show up.
-% That is what \eatinput is for; after that, the `\' should revert to printing
-% a backslash.
-%
-@gdef@eatinput input texinfo{@fixbackslash}
-@global@let\ = @eatinput
-
-% On the other hand, perhaps the file did not have a `\input texinfo'. Then
-% the first `\{ in the file would cause an error. This macro tries to fix
-% that, assuming it is called before the first `\' could plausibly occur.
-% Also back turn on active characters that might appear in the input
-% file name, in case not using a pre-dumped format.
-%
-@gdef@fixbackslash{@ifx\@eatinput @let\ = @normalbackslash @fi
- @catcode`+=@active @catcode`@_=@active}
-
-% These look ok in all fonts, so just make them not special. The @rm below
-% makes sure that the current font starts out as the newly loaded cmr10
-@catcode`@$=@other @catcode`@%=@other @catcode`@&=@other @catcode`@#=@other
-
-@textfonts
-@rm
-
-@c Local variables:
-@c eval: (add-hook 'write-file-hooks 'time-stamp)
-@c page-delimiter: "^\\\\message"
-@c time-stamp-start: "def\\\\texinfoversion{"
-@c time-stamp-format: "%:y-%02m-%02d"
-@c time-stamp-end: "}"
-@c End:
+++ /dev/null
-#! /bin/sh
-#
-# install - install a program, script, or datafile
-# This comes from X11R5.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-#
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-tranformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
- case $1 in
- -c) instcmd="$cpprog"
- shift
- continue;;
-
- -d) dir_arg=true
- shift
- continue;;
-
- -m) chmodcmd="$chmodprog $2"
- shift
- shift
- continue;;
-
- -o) chowncmd="$chownprog $2"
- shift
- shift
- continue;;
-
- -g) chgrpcmd="$chgrpprog $2"
- shift
- shift
- continue;;
-
- -s) stripcmd="$stripprog"
- shift
- continue;;
-
- -t=*) transformarg=`echo $1 | sed 's/-t=//'`
- shift
- continue;;
-
- -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
- shift
- continue;;
-
- *) if [ x"$src" = x ]
- then
- src=$1
- else
- # this colon is to work around a 386BSD /bin/sh bug
- :
- dst=$1
- fi
- shift
- continue;;
- esac
-done
-
-if [ x"$src" = x ]
-then
- echo "install: no input file specified"
- exit 1
-else
- true
-fi
-
-if [ x"$dir_arg" != x ]; then
- dst=$src
- src=""
-
- if [ -d $dst ]; then
- instcmd=:
- else
- instcmd=mkdir
- fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad
-# if $src (and thus $dsttmp) contains '*'.
-
- if [ -f $src -o -d $src ]
- then
- true
- else
- echo "install: $src does not exist"
- exit 1
- fi
-
- if [ x"$dst" = x ]
- then
- echo "install: no destination specified"
- exit 1
- else
- true
- fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
- if [ -d $dst ]
- then
- dst="$dst"/`basename $src`
- else
- true
- fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-# this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='
-'
-IFS="${IFS-${defaultIFS}}"
-
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
- pathcomp="${pathcomp}${1}"
- shift
-
- if [ ! -d "${pathcomp}" ] ;
- then
- $mkdirprog "${pathcomp}"
- else
- true
- fi
-
- pathcomp="${pathcomp}/"
-done
-fi
-
-if [ x"$dir_arg" != x ]
-then
- $doit $instcmd $dst &&
-
- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
- if [ x"$transformarg" = x ]
- then
- dstfile=`basename $dst`
- else
- dstfile=`basename $dst $transformbasename |
- sed $transformarg`$transformbasename
- fi
-
-# don't allow the sed command to completely eliminate the filename
-
- if [ x"$dstfile" = x ]
- then
- dstfile=`basename $dst`
- else
- true
- fi
-
-# Make a temp file name in the proper directory.
-
- dsttmp=$dstdir/#inst.$$#
-
-# Move or copy the file name to the temp name
-
- $doit $instcmd $src $dsttmp &&
-
- trap "rm -f ${dsttmp}" 0 &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing. If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
- if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
- if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
- if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
- if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
-
-# Now rename the file to the real destination.
-
- $doit $rmcmd -f $dstdir/$dstfile &&
- $doit $mvcmd $dsttmp $dstdir/$dstfile
-
-fi &&
-
-
-exit 0
+++ /dev/null
-# Makefile.in generated by automake 1.7 from Makefile.am.
-# @configure_input@
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Automakefile for the library files.
-# Copyright (c) 1995-1998 Markku Rossi
-#
-# Author: Markku Rossi <mtr@iki.fi>
-#
-
-#
-# This file is part of GNU enscript.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; see the file COPYING. If not, write to
-# the Free Software Foundation, 51 Franklin Street, Fifth Floor,
-# Boston, MA 02110-1301, USA.
-#
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
-
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_triplet = @host@
-ACLOCAL = @ACLOCAL@
-ALLOCA = @ALLOCA@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
-CATOBJEXT = @CATOBJEXT@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DATADIRNAME = @DATADIRNAME@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GENCAT = @GENCAT@
-GLIBC21 = @GLIBC21@
-GMSGFMT = @GMSGFMT@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTOBJEXT = @INSTOBJEXT@
-INTLBISON = @INTLBISON@
-INTLLIBS = @INTLLIBS@
-INTLOBJS = @INTLOBJS@
-INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
-LDFLAGS = @LDFLAGS@
-LEX = @LEX@
-LEXLIB = @LEXLIB@
-LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MEDIA = @MEDIA@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-MSGFMT = @MSGFMT@
-MSGMERGE = @MSGMERGE@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-POSUB = @POSUB@
-PSLEVEL = @PSLEVEL@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SPOOLER = @SPOOLER@
-STRIP = @STRIP@
-U = @U@
-USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-YACC = @YACC@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__include = @am__include@
-am__quote = @am__quote@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-
-pkgdata_DATA = ascii.enc asciifise.enc asciidkno.enc hp8.enc ibmpc.enc \
-koi8.enc 88591.enc 88592.enc 88593.enc 88594.enc 88595.enc 88597.enc \
-88599.enc 885910.enc mac.enc ps.enc pslatin1.enc vms.enc a2ps.hdr \
-edd.hdr emacs.hdr enscript.hdr enscript-color.hdr frame.hdr mp.hdr \
-simple.hdr squeeze.hdr enscript.pro
-
-
-EXTRA_DIST = enscript.cfg.in $(pkgdata_DATA) Makefile-encodings \
-make-encoding.pl
-
-
-CLEANFILES = enscript.cfg
-subdir = lib
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-DIST_SOURCES =
-DATA = $(pkgdata_DATA)
-
-DIST_COMMON = ChangeLog Makefile.am Makefile.in
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu lib/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
-uninstall-info-am:
-pkgdataDATA_INSTALL = $(INSTALL_DATA)
-install-pkgdataDATA: $(pkgdata_DATA)
- @$(NORMAL_INSTALL)
- $(mkinstalldirs) $(DESTDIR)$(pkgdatadir)
- @list='$(pkgdata_DATA)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f="`echo $$p | sed -e 's|^.*/||'`"; \
- echo " $(pkgdataDATA_INSTALL) $$d$$p $(DESTDIR)$(pkgdatadir)/$$f"; \
- $(pkgdataDATA_INSTALL) $$d$$p $(DESTDIR)$(pkgdatadir)/$$f; \
- done
-
-uninstall-pkgdataDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(pkgdata_DATA)'; for p in $$list; do \
- f="`echo $$p | sed -e 's|^.*/||'`"; \
- echo " rm -f $(DESTDIR)$(pkgdatadir)/$$f"; \
- rm -f $(DESTDIR)$(pkgdatadir)/$$f; \
- done
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = ..
-distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkinstalldirs) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(DATA) all-local
-
-installdirs:
- $(mkinstalldirs) $(DESTDIR)$(pkgdatadir)
-
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
- -rm -f Makefile $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
-
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-data-local install-pkgdataDATA
-
-install-exec-am:
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-info-am uninstall-local uninstall-pkgdataDATA
-
-.PHONY: all all-am all-local check check-am clean clean-generic \
- distclean distclean-generic distdir dvi dvi-am info info-am \
- install install-am install-data install-data-am \
- install-data-local install-exec install-exec-am install-info \
- install-info-am install-man install-pkgdataDATA install-strip \
- installcheck installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
- pdf-am ps ps-am uninstall uninstall-am uninstall-info-am \
- uninstall-local uninstall-pkgdataDATA
-
-
-all-local: enscript.cfg
-
-install-data-local: enscript.cfg
- $(top_srcdir)/mkinstalldirs $(sysconfdir)
- if test -r $(sysconfdir)/enscript.cfg; then \
- cp $(sysconfdir)/enscript.cfg $(sysconfdir)/enscript.cfg.old; \
- else :; \
- fi
- $(INSTALL_DATA) enscript.cfg $(sysconfdir)/enscript.cfg
-
-uninstall-local:
- rm -f $(sysconfdir)/enscript.cfg
-
-enscript.cfg: $(srcdir)/enscript.cfg.in Makefile
- sed 's%@DATADIR@%$(datadir)%g; s%@media@%@MEDIA@%g; s%@BINDIR@%$(bindir)%g; s%@spooler@%@SPOOLER@%g; s%@pslevel@%@PSLEVEL@%g' \
- $(srcdir)/enscript.cfg.in >enscript.cfg
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-# Copyright (C) 1996, 1997, 1999, 2000, 2002 Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
- echo 1>&2 "Try \`$0 --help' for more information"
- exit 1
-fi
-
-run=:
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
- configure_ac=configure.ac
-else
- configure_ac=configure.in
-fi
-
-case "$1" in
---run)
- # Try to run requested program, and just exit if it succeeds.
- run=
- shift
- "$@" && exit 0
- ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case "$1" in
-
- -h|--h|--he|--hel|--help)
- echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
- -h, --help display this help and exit
- -v, --version output version information and exit
- --run try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
- aclocal touch file \`aclocal.m4'
- autoconf touch file \`configure'
- autoheader touch file \`config.h.in'
- automake touch all \`Makefile.in' files
- bison create \`y.tab.[ch]', if possible, from existing .[ch]
- flex create \`lex.yy.c', if possible, from existing .c
- help2man touch the output file
- lex create \`lex.yy.c', if possible, from existing .c
- makeinfo touch the output file
- tar try tar, gnutar, gtar, then tar without non-portable flags
- yacc create \`y.tab.[ch]', if possible, from existing .[ch]"
- ;;
-
- -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
- echo "missing 0.4 - GNU automake"
- ;;
-
- -*)
- echo 1>&2 "$0: Unknown \`$1' option"
- echo 1>&2 "Try \`$0 --help' for more information"
- exit 1
- ;;
-
- aclocal*)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
- echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
- you modified \`acinclude.m4' or \`${configure_ac}'. You might want
- to install the \`Automake' and \`Perl' packages. Grab them from
- any GNU archive site."
- touch aclocal.m4
- ;;
-
- autoconf)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
- echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
- you modified \`${configure_ac}'. You might want to install the
- \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
- archive site."
- touch configure
- ;;
-
- autoheader)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
- echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
- you modified \`acconfig.h' or \`${configure_ac}'. You might want
- to install the \`Autoconf' and \`GNU m4' packages. Grab them
- from any GNU archive site."
- files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
- test -z "$files" && files="config.h"
- touch_files=
- for f in $files; do
- case "$f" in
- *:*) touch_files="$touch_files "`echo "$f" |
- sed -e 's/^[^:]*://' -e 's/:.*//'`;;
- *) touch_files="$touch_files $f.in";;
- esac
- done
- touch $touch_files
- ;;
-
- automake*)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
- echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
- you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
- You might want to install the \`Automake' and \`Perl' packages.
- Grab them from any GNU archive site."
- find . -type f -name Makefile.am -print |
- sed 's/\.am$/.in/' |
- while read f; do touch "$f"; done
- ;;
-
- autom4te)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
- echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
- system. You might have modified some files without having the
- proper tools for further handling them.
- You can get \`$1Help2man' as part of \`Autoconf' from any GNU
- archive site."
-
- file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
- test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo "#! /bin/sh"
- echo "# Created by GNU Automake missing as a replacement of"
- echo "# $ $@"
- echo "exit 0"
- chmod +x $file
- exit 1
- fi
- ;;
-
- bison|yacc)
- echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
- you modified a \`.y' file. You may need the \`Bison' package
- in order for those modifications to take effect. You can get
- \`Bison' from any GNU archive site."
- rm -f y.tab.c y.tab.h
- if [ $# -ne 1 ]; then
- eval LASTARG="\${$#}"
- case "$LASTARG" in
- *.y)
- SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if [ -f "$SRCFILE" ]; then
- cp "$SRCFILE" y.tab.c
- fi
- SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if [ -f "$SRCFILE" ]; then
- cp "$SRCFILE" y.tab.h
- fi
- ;;
- esac
- fi
- if [ ! -f y.tab.h ]; then
- echo >y.tab.h
- fi
- if [ ! -f y.tab.c ]; then
- echo 'main() { return 0; }' >y.tab.c
- fi
- ;;
-
- lex|flex)
- echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
- you modified a \`.l' file. You may need the \`Flex' package
- in order for those modifications to take effect. You can get
- \`Flex' from any GNU archive site."
- rm -f lex.yy.c
- if [ $# -ne 1 ]; then
- eval LASTARG="\${$#}"
- case "$LASTARG" in
- *.l)
- SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if [ -f "$SRCFILE" ]; then
- cp "$SRCFILE" lex.yy.c
- fi
- ;;
- esac
- fi
- if [ ! -f lex.yy.c ]; then
- echo 'main() { return 0; }' >lex.yy.c
- fi
- ;;
-
- help2man)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- fi
-
- echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
- you modified a dependency of a manual page. You may need the
- \`Help2man' package in order for those modifications to take
- effect. You can get \`Help2man' from any GNU archive site."
-
- file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
- if test -z "$file"; then
- file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
- fi
- if [ -f "$file" ]; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo ".ab help2man is required to generate this page"
- exit 1
- fi
- ;;
-
- makeinfo)
- if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
- # We have makeinfo, but it failed.
- exit 1
- fi
-
- echo 1>&2 "\
-WARNING: \`$1' is missing on your system. You should only need it if
- you modified a \`.texi' or \`.texinfo' file, or any other file
- indirectly affecting the aspect of the manual. The spurious
- call might also be the consequence of using a buggy \`make' (AIX,
- DU, IRIX). You might want to install the \`Texinfo' package or
- the \`GNU make' package. Grab either from any GNU archive site."
- file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
- if test -z "$file"; then
- file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
- fi
- touch $file
- ;;
-
- tar)
- shift
- if test -n "$run"; then
- echo 1>&2 "ERROR: \`tar' requires --run"
- exit 1
- fi
-
- # We have already tried tar in the generic part.
- # Look for gnutar/gtar before invocation to avoid ugly error
- # messages.
- if (gnutar --version > /dev/null 2>&1); then
- gnutar "$@" && exit 0
- fi
- if (gtar --version > /dev/null 2>&1); then
- gtar "$@" && exit 0
- fi
- firstarg="$1"
- if shift; then
- case "$firstarg" in
- *o*)
- firstarg=`echo "$firstarg" | sed s/o//`
- tar "$firstarg" "$@" && exit 0
- ;;
- esac
- case "$firstarg" in
- *h*)
- firstarg=`echo "$firstarg" | sed s/h//`
- tar "$firstarg" "$@" && exit 0
- ;;
- esac
- fi
-
- echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
- You may want to install GNU tar or Free paxutils, or check the
- command line arguments."
- exit 1
- ;;
-
- *)
- echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
- system. You might have modified some files without having the
- proper tools for further handling them. Check the \`README' file,
- it often tells you about the needed prerequirements for installing
- this package. You may also peek at any GNU archive site, in case
- some other package would contain this missing \`$1' program."
- exit 1
- ;;
-esac
-
-exit 0
+++ /dev/null
-#! /bin/sh
-# mkinstalldirs --- make directory hierarchy
-# Author: Noah Friedman <friedman@prep.ai.mit.edu>
-# Created: 1993-05-16
-# Public domain
-
-# $Id: mkinstalldirs,v 1.1.1.1 2003/03/05 07:25:49 mtr Exp $
-
-errstatus=0
-
-for file
-do
- set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
- shift
-
- pathcomp=
- for d
- do
- pathcomp="$pathcomp$d"
- case "$pathcomp" in
- -* ) pathcomp=./$pathcomp ;;
- esac
-
- if test ! -d "$pathcomp"; then
- echo "mkdir $pathcomp"
-
- mkdir "$pathcomp" || lasterr=$?
-
- if test ! -d "$pathcomp"; then
- errstatus=$lasterr
- fi
- fi
-
- pathcomp="$pathcomp/"
- done
-done
-
-exit $errstatus
-
-# mkinstalldirs ends here
+++ /dev/null
-# Makefile.in generated by automake 1.7 from Makefile.am.
-# @configure_input@
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Makefile for scripts directory.
-# Copyright (c) 1996, 1997 Markku Rossi
-#
-# Author: Markku Rossi <mtr@iki.fi>
-#
-
-#
-# This file is part of GNU enscript.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; see the file COPYING. If not, write to
-# the Free Software Foundation, 51 Franklin Street, Fifth Floor,
-# Boston, MA 02110-1301, USA.
-#
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
-
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_triplet = @host@
-ACLOCAL = @ACLOCAL@
-ALLOCA = @ALLOCA@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
-CATOBJEXT = @CATOBJEXT@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DATADIRNAME = @DATADIRNAME@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GENCAT = @GENCAT@
-GLIBC21 = @GLIBC21@
-GMSGFMT = @GMSGFMT@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTOBJEXT = @INSTOBJEXT@
-INTLBISON = @INTLBISON@
-INTLLIBS = @INTLLIBS@
-INTLOBJS = @INTLOBJS@
-INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
-LDFLAGS = @LDFLAGS@
-LEX = @LEX@
-LEXLIB = @LEXLIB@
-LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MEDIA = @MEDIA@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-MSGFMT = @MSGFMT@
-MSGMERGE = @MSGMERGE@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-POSUB = @POSUB@
-PSLEVEL = @PSLEVEL@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SPOOLER = @SPOOLER@
-STRIP = @STRIP@
-U = @U@
-USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-YACC = @YACC@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__include = @am__include@
-am__quote = @am__quote@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-
-man_MANS = diffpp.1 sliceprint.1
-
-bin_SCRIPTS = diffpp sliceprint
-
-EXTRA_DIST = diffpp.in sliceprint.in $(man_MANS)
-
-CLEANFILES = diffpp sliceprint
-subdir = scripts
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-SCRIPTS = $(bin_SCRIPTS)
-
-DIST_SOURCES =
-
-NROFF = nroff
-MANS = $(man_MANS)
-DIST_COMMON = ChangeLog Makefile.am Makefile.in
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu scripts/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
-binSCRIPT_INSTALL = $(INSTALL_SCRIPT)
-install-binSCRIPTS: $(bin_SCRIPTS)
- @$(NORMAL_INSTALL)
- $(mkinstalldirs) $(DESTDIR)$(bindir)
- @list='$(bin_SCRIPTS)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f $$d$$p; then \
- f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
- echo " $(binSCRIPT_INSTALL) $$d$$p $(DESTDIR)$(bindir)/$$f"; \
- $(binSCRIPT_INSTALL) $$d$$p $(DESTDIR)$(bindir)/$$f; \
- else :; fi; \
- done
-
-uninstall-binSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(bin_SCRIPTS)'; for p in $$list; do \
- f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
- echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
- rm -f $(DESTDIR)$(bindir)/$$f; \
- done
-uninstall-info-am:
-
-man1dir = $(mandir)/man1
-install-man1: $(man1_MANS) $(man_MANS)
- @$(NORMAL_INSTALL)
- $(mkinstalldirs) $(DESTDIR)$(man1dir)
- @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.1*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
- else file=$$i; fi; \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 1*) ;; \
- *) ext='1' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \
- $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \
- done
-uninstall-man1:
- @$(NORMAL_UNINSTALL)
- @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.1*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \
- rm -f $(DESTDIR)$(man1dir)/$$inst; \
- done
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = ..
-distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkinstalldirs) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS) $(MANS)
-
-installdirs:
- $(mkinstalldirs) $(DESTDIR)$(bindir) $(DESTDIR)$(man1dir)
-
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
- -rm -f Makefile $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
-
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-exec-am: install-binSCRIPTS
-
-install-info: install-info-am
-
-install-man: install-man1
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binSCRIPTS uninstall-info-am uninstall-man
-
-uninstall-man: uninstall-man1
-
-.PHONY: all all-am check check-am clean clean-generic distclean \
- distclean-generic distdir dvi dvi-am info info-am install \
- install-am install-binSCRIPTS install-data install-data-am \
- install-exec install-exec-am install-info install-info-am \
- install-man install-man1 install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
- pdf-am ps ps-am uninstall uninstall-am uninstall-binSCRIPTS \
- uninstall-info-am uninstall-man uninstall-man1
-
-
-diffpp: $(srcdir)/diffpp.in
- sed 's%@PERLPROG@%@PERL@%g' $(srcdir)/diffpp.in >diffpp
-
-sliceprint: $(srcdir)/sliceprint.in
- sed 's%@PERLPROG@%@PERL@%g' $(srcdir)/sliceprint.in >sliceprint
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-# Makefile.in generated by automake 1.7 from Makefile.am.
-# @configure_input@
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Makefile for enscript.
-# Copyright (c) 1995-2003 Markku Rossi
-#
-# Author: Markku Rossi <mtr@iki.fi>
-#
-
-#
-# This file is part of GNU enscript.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; see the file COPYING. If not, write to
-# the Free Software Foundation, 51 Franklin Street, Fifth Floor,
-# Boston, MA 02110-1301, USA.
-#
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
-
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_triplet = @host@
-ACLOCAL = @ACLOCAL@
-ALLOCA = @ALLOCA@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
-CATOBJEXT = @CATOBJEXT@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DATADIRNAME = @DATADIRNAME@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GENCAT = @GENCAT@
-GLIBC21 = @GLIBC21@
-GMSGFMT = @GMSGFMT@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTOBJEXT = @INSTOBJEXT@
-INTLBISON = @INTLBISON@
-INTLLIBS = @INTLLIBS@
-INTLOBJS = @INTLOBJS@
-INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
-LDFLAGS = @LDFLAGS@
-LEX = @LEX@
-LEXLIB = @LEXLIB@
-LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MEDIA = @MEDIA@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-MSGFMT = @MSGFMT@
-MSGMERGE = @MSGMERGE@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-POSUB = @POSUB@
-PSLEVEL = @PSLEVEL@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SPOOLER = @SPOOLER@
-STRIP = @STRIP@
-U = @U@
-USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-YACC = @YACC@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__include = @am__include@
-am__quote = @am__quote@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-
-AUTOMAKE_OPTIONS = ansi2knr
-
-SUBDIRS = tests
-
-bin_PROGRAMS = enscript mkafmmap
-
-enscript_SOURCES = main.c psgen.c util.c prt_lpr.c
-
-enscript_SOURCES_windelta = \
- -prt_lpr.c \
- +prt_dos.c
-
-
-mkafmmap_SOURCES = mkafmmap.c
-
-LDADD = ../afmlib/libafm.a @LIBINTL@ ../compat/libcompat.a -lm
-enscript_DEPENDENCIES = ../afmlib/libafm.a ../compat/libcompat.a
-mkafmmap_DEPENDENCIES = ../afmlib/libafm.a ../compat/libcompat.a
-
-noinst_HEADERS = gsint.h
-
-localedir = $(prefix)/share/locale
-
-INCLUDES = -I$(srcdir)/../compat -I$(srcdir)/../afmlib \
--I$(srcdir)/../intl -I../intl -DLOCALEDIR=\"$(localedir)\" \
--DLIBRARY=\"$(datadir)/enscript\" -DSYSCONFDIR=\"$(sysconfdir)\"
-
-
-INCLUDES_windelta = \
- +-I../w32 \
- --DLOCALEDIR=\"$(localedir)\" \
- --DLIBRARY=\"$(datadir)/enscript\" \
- --DSYSCONFDIR=\"$(sysconfdir)\" \
- +-DLIBRARY=\"c:\\enscript\" \
- +-DSYSCONFDIR=\"c:\\enscript\"
-
-
-EXTRA_DIST = prt_dos.c ansi2knr.c ansi2knr.1
-subdir = src
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-bin_PROGRAMS = enscript$(EXEEXT) mkafmmap$(EXEEXT)
-PROGRAMS = $(bin_PROGRAMS)
-
-am_enscript_OBJECTS = main$U.$(OBJEXT) psgen$U.$(OBJEXT) \
- util$U.$(OBJEXT) prt_lpr$U.$(OBJEXT)
-enscript_OBJECTS = $(am_enscript_OBJECTS)
-enscript_LDADD = $(LDADD)
-enscript_LDFLAGS =
-am_mkafmmap_OBJECTS = mkafmmap$U.$(OBJEXT)
-mkafmmap_OBJECTS = $(am_mkafmmap_OBJECTS)
-mkafmmap_LDADD = $(LDADD)
-mkafmmap_LDFLAGS =
-
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/main$U.Po ./$(DEPDIR)/mkafmmap$U.Po \
-@AMDEP_TRUE@ ./$(DEPDIR)/prt_lpr$U.Po ./$(DEPDIR)/psgen$U.Po \
-@AMDEP_TRUE@ ./$(DEPDIR)/util$U.Po
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-DIST_SOURCES = $(enscript_SOURCES) $(mkafmmap_SOURCES)
-HEADERS = $(noinst_HEADERS)
-
-
-RECURSIVE_TARGETS = info-recursive dvi-recursive pdf-recursive \
- ps-recursive install-info-recursive uninstall-info-recursive \
- all-recursive install-data-recursive install-exec-recursive \
- installdirs-recursive install-recursive uninstall-recursive \
- check-recursive installcheck-recursive
-DIST_COMMON = $(noinst_HEADERS) ChangeLog Makefile.am Makefile.in \
- ansi2knr.1 ansi2knr.c
-DIST_SUBDIRS = $(SUBDIRS)
-SOURCES = $(enscript_SOURCES) $(mkafmmap_SOURCES)
-
-all: all-recursive
-
-.SUFFIXES:
-.SUFFIXES: .c .o .obj
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu src/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
-install-binPROGRAMS: $(bin_PROGRAMS)
- @$(NORMAL_INSTALL)
- $(mkinstalldirs) $(DESTDIR)$(bindir)
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- if test -f $$p \
- ; then \
- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f"; \
- $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f || exit 1; \
- else :; fi; \
- done
-
-uninstall-binPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
- rm -f $(DESTDIR)$(bindir)/$$f; \
- done
-
-clean-binPROGRAMS:
- -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-enscript$(EXEEXT): $(enscript_OBJECTS) $(enscript_DEPENDENCIES)
- @rm -f enscript$(EXEEXT)
- $(LINK) $(enscript_LDFLAGS) $(enscript_OBJECTS) $(enscript_LDADD) $(LIBS)
-mkafmmap$(EXEEXT): $(mkafmmap_OBJECTS) $(mkafmmap_DEPENDENCIES)
- @rm -f mkafmmap$(EXEEXT)
- $(LINK) $(mkafmmap_LDFLAGS) $(mkafmmap_OBJECTS) $(mkafmmap_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT) core *.core
-
-distclean-compile:
- -rm -f *.tab.c
-
-ANSI2KNR = @ANSI2KNR@
-ansi2knr: ansi2knr.$(OBJEXT)
- $(LINK) ansi2knr.$(OBJEXT) $(LIBS)
-ansi2knr.$(OBJEXT): $(CONFIG_HEADER)
-
-clean-krextra:
- -rm -f ansi2knr
-
-mostlyclean-kr:
- -test "$U" = "" || rm -f *_.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mkafmmap$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/prt_lpr$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/psgen$U.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/util$U.Po@am__quote@
-
-distclean-depend:
- -rm -rf ./$(DEPDIR)
-
-.c.o:
-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
-@am__fastdepCC_TRUE@ -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \
-@am__fastdepCC_TRUE@ then mv "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
-@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
-@am__fastdepCC_TRUE@ fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
-
-.c.obj:
-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
-@am__fastdepCC_TRUE@ -c -o $@ `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'`; \
-@am__fastdepCC_TRUE@ then mv "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
-@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
-@am__fastdepCC_TRUE@ fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'`
-main_.c: main.c $(ANSI2KNR)
- $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/main.c; then echo $(srcdir)/main.c; else echo main.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > main_.c || rm -f main_.c
-mkafmmap_.c: mkafmmap.c $(ANSI2KNR)
- $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/mkafmmap.c; then echo $(srcdir)/mkafmmap.c; else echo mkafmmap.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > mkafmmap_.c || rm -f mkafmmap_.c
-prt_lpr_.c: prt_lpr.c $(ANSI2KNR)
- $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/prt_lpr.c; then echo $(srcdir)/prt_lpr.c; else echo prt_lpr.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > prt_lpr_.c || rm -f prt_lpr_.c
-psgen_.c: psgen.c $(ANSI2KNR)
- $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/psgen.c; then echo $(srcdir)/psgen.c; else echo psgen.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > psgen_.c || rm -f psgen_.c
-util_.c: util.c $(ANSI2KNR)
- $(CPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) `if test -f $(srcdir)/util.c; then echo $(srcdir)/util.c; else echo util.c; fi` | sed 's/^# \([0-9]\)/#line \1/' | $(ANSI2KNR) > util_.c || rm -f util_.c
-main_.$(OBJEXT) mkafmmap_.$(OBJEXT) prt_lpr_.$(OBJEXT) psgen_.$(OBJEXT) \
-util_.$(OBJEXT) : $(ANSI2KNR)
-uninstall-info-am:
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
- @set fnord $$MAKEFLAGS; amf=$$2; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
- @set fnord $$MAKEFLAGS; amf=$$2; \
- dot_seen=no; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- rev=''; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
- done; \
- rev="$$rev ."; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
- done && test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
- done
-
-ETAGS = etags
-ETAGSFLAGS =
-
-CTAGS = ctags
-CTAGSFLAGS =
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
- fi; \
- done; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$tags$$unique" \
- || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique
-
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = ..
-distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkinstalldirs) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -d $(distdir)/$$subdir \
- || mkdir $(distdir)/$$subdir \
- || exit 1; \
- (cd $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$(top_distdir)" \
- distdir=../$(distdir)/$$subdir \
- distdir) \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-recursive
-all-am: Makefile $(ANSI2KNR) $(PROGRAMS) $(HEADERS)
-installdirs: installdirs-recursive
-installdirs-am:
- $(mkinstalldirs) $(DESTDIR)$(bindir)
-
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -rm -f Makefile $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-binPROGRAMS clean-generic clean-krextra mostlyclean-am
-
-distclean: distclean-recursive
-
-distclean-am: clean-am distclean-compile distclean-depend \
- distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-exec-am: install-binPROGRAMS
-
-install-info: install-info-recursive
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic mostlyclean-kr
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS uninstall-info-am
-
-uninstall-info: uninstall-info-recursive
-
-.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am clean \
- clean-binPROGRAMS clean-generic clean-krextra clean-recursive \
- ctags ctags-recursive distclean distclean-compile \
- distclean-depend distclean-generic distclean-recursive \
- distclean-tags distdir dvi dvi-am dvi-recursive info info-am \
- info-recursive install install-am install-binPROGRAMS \
- install-data install-data-am install-data-recursive \
- install-exec install-exec-am install-exec-recursive \
- install-info install-info-am install-info-recursive install-man \
- install-recursive install-strip installcheck installcheck-am \
- installdirs installdirs-am installdirs-recursive \
- maintainer-clean maintainer-clean-generic \
- maintainer-clean-recursive mostlyclean mostlyclean-compile \
- mostlyclean-generic mostlyclean-kr mostlyclean-recursive pdf \
- pdf-am pdf-recursive ps ps-am ps-recursive tags tags-recursive \
- uninstall uninstall-am uninstall-binPROGRAMS uninstall-info-am \
- uninstall-info-recursive uninstall-recursive
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-.TH ANSI2KNR 1 "19 Jan 1996"
-.SH NAME
-ansi2knr \- convert ANSI C to Kernighan & Ritchie C
-.SH SYNOPSIS
-.I ansi2knr
-[--varargs] input_file [output_file]
-.SH DESCRIPTION
-If no output_file is supplied, output goes to stdout.
-.br
-There are no error messages.
-.sp
-.I ansi2knr
-recognizes function definitions by seeing a non-keyword identifier at the left
-margin, followed by a left parenthesis, with a right parenthesis as the last
-character on the line, and with a left brace as the first token on the
-following line (ignoring possible intervening comments). It will recognize a
-multi-line header provided that no intervening line ends with a left or right
-brace or a semicolon. These algorithms ignore whitespace and comments, except
-that the function name must be the first thing on the line.
-.sp
-The following constructs will confuse it:
-.br
- - Any other construct that starts at the left margin and follows the
-above syntax (such as a macro or function call).
-.br
- - Some macros that tinker with the syntax of the function header.
-.sp
-The --varargs switch is obsolete, and is recognized only for
-backwards compatibility. The present version of
-.I ansi2knr
-will always attempt to convert a ... argument to va_alist and va_dcl.
-.SH AUTHOR
-L. Peter Deutsch <ghost@aladdin.com> wrote the original ansi2knr and
-continues to maintain the current version; most of the code in the current
-version is his work. ansi2knr also includes contributions by Francois
-Pinard <pinard@iro.umontreal.ca> and Jim Avera <jima@netcom.com>.
+++ /dev/null
-/* Copyright (C) 1989, 1997 Aladdin Enterprises. All rights reserved. */
-
-/*$Id: ansi2knr.c,v 1.1.1.1 2003/03/05 07:25:51 mtr Exp $*/
-/* Convert ANSI C function definitions to K&R ("traditional C") syntax */
-
-/*
-ansi2knr is distributed in the hope that it will be useful, but WITHOUT ANY
-WARRANTY. No author or distributor accepts responsibility to anyone for the
-consequences of using it or for whether it serves any particular purpose or
-works at all, unless he says so in writing. Refer to the GNU General Public
-License (the "GPL") for full details.
-
-Everyone is granted permission to copy, modify and redistribute ansi2knr,
-but only under the conditions described in the GPL. A copy of this license
-is supposed to have been given to you along with ansi2knr so you can know
-your rights and responsibilities. It should be in a file named COPYLEFT,
-or, if there is no file named COPYLEFT, a file named COPYING. Among other
-things, the copyright notice and this notice must be preserved on all
-copies.
-
-We explicitly state here what we believe is already implied by the GPL: if
-the ansi2knr program is distributed as a separate set of sources and a
-separate executable file which are aggregated on a storage medium together
-with another program, this in itself does not bring the other program under
-the GPL, nor does the mere fact that such a program or the procedures for
-constructing it invoke the ansi2knr executable bring any other part of the
-program under the GPL.
-*/
-
-/*
- * Usage:
- ansi2knr [--filename FILENAME] [INPUT_FILE [OUTPUT_FILE]]
- * --filename provides the file name for the #line directive in the output,
- * overriding input_file (if present).
- * If no input_file is supplied, input is read from stdin.
- * If no output_file is supplied, output goes to stdout.
- * There are no error messages.
- *
- * ansi2knr recognizes function definitions by seeing a non-keyword
- * identifier at the left margin, followed by a left parenthesis,
- * with a right parenthesis as the last character on the line,
- * and with a left brace as the first token on the following line
- * (ignoring possible intervening comments).
- * It will recognize a multi-line header provided that no intervening
- * line ends with a left or right brace or a semicolon.
- * These algorithms ignore whitespace and comments, except that
- * the function name must be the first thing on the line.
- * The following constructs will confuse it:
- * - Any other construct that starts at the left margin and
- * follows the above syntax (such as a macro or function call).
- * - Some macros that tinker with the syntax of the function header.
- */
-
-/*
- * The original and principal author of ansi2knr is L. Peter Deutsch
- * <ghost@aladdin.com>. Other authors are noted in the change history
- * that follows (in reverse chronological order):
- lpd 97-12-08 made input_file optional; only closes input and/or
- output file if not stdin or stdout respectively; prints
- usage message on stderr rather than stdout; adds
- --filename switch (changes suggested by
- <ceder@lysator.liu.se>)
- lpd 96-01-21 added code to cope with not HAVE_CONFIG_H and with
- compilers that don't understand void, as suggested by
- Tom Lane
- lpd 96-01-15 changed to require that the first non-comment token
- on the line following a function header be a left brace,
- to reduce sensitivity to macros, as suggested by Tom Lane
- <tgl@sss.pgh.pa.us>
- lpd 95-06-22 removed #ifndefs whose sole purpose was to define
- undefined preprocessor symbols as 0; changed all #ifdefs
- for configuration symbols to #ifs
- lpd 95-04-05 changed copyright notice to make it clear that
- including ansi2knr in a program does not bring the entire
- program under the GPL
- lpd 94-12-18 added conditionals for systems where ctype macros
- don't handle 8-bit characters properly, suggested by
- Francois Pinard <pinard@iro.umontreal.ca>;
- removed --varargs switch (this is now the default)
- lpd 94-10-10 removed CONFIG_BROKETS conditional
- lpd 94-07-16 added some conditionals to help GNU `configure',
- suggested by Francois Pinard <pinard@iro.umontreal.ca>;
- properly erase prototype args in function parameters,
- contributed by Jim Avera <jima@netcom.com>;
- correct error in writeblanks (it shouldn't erase EOLs)
- lpd 89-xx-xx original version
- */
-
-/* Most of the conditionals here are to make ansi2knr work with */
-/* or without the GNU configure machinery. */
-
-#if HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include <stdio.h>
-#include <ctype.h>
-
-#if HAVE_CONFIG_H
-
-/*
- For properly autoconfiguring ansi2knr, use AC_CONFIG_HEADER(config.h).
- This will define HAVE_CONFIG_H and so, activate the following lines.
- */
-
-# if STDC_HEADERS || HAVE_STRING_H
-# include <string.h>
-# else
-# include <strings.h>
-# endif
-
-#else /* not HAVE_CONFIG_H */
-
-/* Otherwise do it the hard way */
-
-# ifdef BSD
-# include <strings.h>
-# else
-# ifdef VMS
- extern int strlen(), strncmp();
-# else
-# include <string.h>
-# endif
-# endif
-
-#endif /* not HAVE_CONFIG_H */
-
-#if STDC_HEADERS
-# include <stdlib.h>
-#else
-/*
- malloc and free should be declared in stdlib.h,
- but if you've got a K&R compiler, they probably aren't.
- */
-# ifdef MSDOS
-# include <malloc.h>
-# else
-# ifdef VMS
- extern char *malloc();
- extern void free();
-# else
- extern char *malloc();
- extern int free();
-# endif
-# endif
-
-#endif
-
-/*
- * The ctype macros don't always handle 8-bit characters correctly.
- * Compensate for this here.
- */
-#ifdef isascii
-# undef HAVE_ISASCII /* just in case */
-# define HAVE_ISASCII 1
-#else
-#endif
-#if STDC_HEADERS || !HAVE_ISASCII
-# define is_ascii(c) 1
-#else
-# define is_ascii(c) isascii(c)
-#endif
-
-#define is_space(c) (is_ascii(c) && isspace(c))
-#define is_alpha(c) (is_ascii(c) && isalpha(c))
-#define is_alnum(c) (is_ascii(c) && isalnum(c))
-
-/* Scanning macros */
-#define isidchar(ch) (is_alnum(ch) || (ch) == '_')
-#define isidfirstchar(ch) (is_alpha(ch) || (ch) == '_')
-
-/* Forward references */
-char *skipspace();
-int writeblanks();
-int test1();
-int convert1();
-
-/* The main program */
-int
-main(argc, argv)
- int argc;
- char *argv[];
-{ FILE *in = stdin;
- FILE *out = stdout;
- char *filename = 0;
-#define bufsize 5000 /* arbitrary size */
- char *buf;
- char *line;
- char *more;
- char *usage =
- "Usage: ansi2knr [--filename FILENAME] [INPUT_FILE [OUTPUT_FILE]]\n";
- /*
- * In previous versions, ansi2knr recognized a --varargs switch.
- * If this switch was supplied, ansi2knr would attempt to convert
- * a ... argument to va_alist and va_dcl; if this switch was not
- * supplied, ansi2knr would simply drop any such arguments.
- * Now, ansi2knr always does this conversion, and we only
- * check for this switch for backward compatibility.
- */
- int convert_varargs = 1;
-
- while ( argc > 1 && argv[1][0] == '-' ) {
- if ( !strcmp(argv[1], "--varargs") ) {
- convert_varargs = 1;
- argc--;
- argv++;
- continue;
- }
- if ( !strcmp(argv[1], "--filename") && argc > 2 ) {
- filename = argv[2];
- argc -= 2;
- argv += 2;
- continue;
- }
- fprintf(stderr, "Unrecognized switch: %s\n", argv[1]);
- fprintf(stderr, usage);
- exit(1);
- }
- switch ( argc )
- {
- default:
- fprintf(stderr, usage);
- exit(0);
- case 3:
- out = fopen(argv[2], "w");
- if ( out == NULL ) {
- fprintf(stderr, "Cannot open output file %s\n", argv[2]);
- exit(1);
- }
- /* falls through */
- case 2:
- in = fopen(argv[1], "r");
- if ( in == NULL ) {
- fprintf(stderr, "Cannot open input file %s\n", argv[1]);
- exit(1);
- }
- if ( filename == 0 )
- filename = argv[1];
- /* falls through */
- case 1:
- break;
- }
- if ( filename )
- fprintf(out, "#line 1 \"%s\"\n", filename);
- buf = malloc(bufsize);
- line = buf;
- while ( fgets(line, (unsigned)(buf + bufsize - line), in) != NULL )
- {
-test: line += strlen(line);
- switch ( test1(buf) )
- {
- case 2: /* a function header */
- convert1(buf, out, 1, convert_varargs);
- break;
- case 1: /* a function */
- /* Check for a { at the start of the next line. */
- more = ++line;
-f: if ( line >= buf + (bufsize - 1) ) /* overflow check */
- goto wl;
- if ( fgets(line, (unsigned)(buf + bufsize - line), in) == NULL )
- goto wl;
- switch ( *skipspace(more, 1) )
- {
- case '{':
- /* Definitely a function header. */
- convert1(buf, out, 0, convert_varargs);
- fputs(more, out);
- break;
- case 0:
- /* The next line was blank or a comment: */
- /* keep scanning for a non-comment. */
- line += strlen(line);
- goto f;
- default:
- /* buf isn't a function header, but */
- /* more might be. */
- fputs(buf, out);
- strcpy(buf, more);
- line = buf;
- goto test;
- }
- break;
- case -1: /* maybe the start of a function */
- if ( line != buf + (bufsize - 1) ) /* overflow check */
- continue;
- /* falls through */
- default: /* not a function */
-wl: fputs(buf, out);
- break;
- }
- line = buf;
- }
- if ( line != buf )
- fputs(buf, out);
- free(buf);
- if ( out != stdout )
- fclose(out);
- if ( in != stdin )
- fclose(in);
- return 0;
-}
-
-/* Skip over space and comments, in either direction. */
-char *
-skipspace(p, dir)
- register char *p;
- register int dir; /* 1 for forward, -1 for backward */
-{ for ( ; ; )
- { while ( is_space(*p) )
- p += dir;
- if ( !(*p == '/' && p[dir] == '*') )
- break;
- p += dir; p += dir;
- while ( !(*p == '*' && p[dir] == '/') )
- { if ( *p == 0 )
- return p; /* multi-line comment?? */
- p += dir;
- }
- p += dir; p += dir;
- }
- return p;
-}
-
-/*
- * Write blanks over part of a string.
- * Don't overwrite end-of-line characters.
- */
-int
-writeblanks(start, end)
- char *start;
- char *end;
-{ char *p;
- for ( p = start; p < end; p++ )
- if ( *p != '\r' && *p != '\n' )
- *p = ' ';
- return 0;
-}
-
-/*
- * Test whether the string in buf is a function definition.
- * The string may contain and/or end with a newline.
- * Return as follows:
- * 0 - definitely not a function definition;
- * 1 - definitely a function definition;
- * 2 - definitely a function prototype (NOT USED);
- * -1 - may be the beginning of a function definition,
- * append another line and look again.
- * The reason we don't attempt to convert function prototypes is that
- * Ghostscript's declaration-generating macros look too much like
- * prototypes, and confuse the algorithms.
- */
-int
-test1(buf)
- char *buf;
-{ register char *p = buf;
- char *bend;
- char *endfn;
- int contin;
-
- if ( !isidfirstchar(*p) )
- return 0; /* no name at left margin */
- bend = skipspace(buf + strlen(buf) - 1, -1);
- switch ( *bend )
- {
- case ';': contin = 0 /*2*/; break;
- case ')': contin = 1; break;
- case '{': return 0; /* not a function */
- case '}': return 0; /* not a function */
- default: contin = -1;
- }
- while ( isidchar(*p) )
- p++;
- endfn = p;
- p = skipspace(p, 1);
- if ( *p++ != '(' )
- return 0; /* not a function */
- p = skipspace(p, 1);
- if ( *p == ')' )
- return 0; /* no parameters */
- /* Check that the apparent function name isn't a keyword. */
- /* We only need to check for keywords that could be followed */
- /* by a left parenthesis (which, unfortunately, is most of them). */
- { static char *words[] =
- { "asm", "auto", "case", "char", "const", "double",
- "extern", "float", "for", "if", "int", "long",
- "register", "return", "short", "signed", "sizeof",
- "static", "switch", "typedef", "unsigned",
- "void", "volatile", "while", 0
- };
- char **key = words;
- char *kp;
- int len = endfn - buf;
-
- while ( (kp = *key) != 0 )
- { if ( strlen(kp) == len && !strncmp(kp, buf, len) )
- return 0; /* name is a keyword */
- key++;
- }
- }
- return contin;
-}
-
-/* Convert a recognized function definition or header to K&R syntax. */
-int
-convert1(buf, out, header, convert_varargs)
- char *buf;
- FILE *out;
- int header; /* Boolean */
- int convert_varargs; /* Boolean */
-{ char *endfn;
- register char *p;
- /*
- * The breaks table contains pointers to the beginning and end
- * of each argument.
- */
- char **breaks;
- unsigned num_breaks = 2; /* for testing */
- char **btop;
- char **bp;
- char **ap;
- char *vararg = 0;
-
- /* Pre-ANSI implementations don't agree on whether strchr */
- /* is called strchr or index, so we open-code it here. */
- for ( endfn = buf; *(endfn++) != '('; )
- ;
-top: p = endfn;
- breaks = (char **)malloc(sizeof(char *) * num_breaks * 2);
- if ( breaks == 0 )
- { /* Couldn't allocate break table, give up */
- fprintf(stderr, "Unable to allocate break table!\n");
- fputs(buf, out);
- return -1;
- }
- btop = breaks + num_breaks * 2 - 2;
- bp = breaks;
- /* Parse the argument list */
- do
- { int level = 0;
- char *lp = NULL;
- char *rp;
- char *end = NULL;
-
- if ( bp >= btop )
- { /* Filled up break table. */
- /* Allocate a bigger one and start over. */
- free((char *)breaks);
- num_breaks <<= 1;
- goto top;
- }
- *bp++ = p;
- /* Find the end of the argument */
- for ( ; end == NULL; p++ )
- { switch(*p)
- {
- case ',':
- if ( !level ) end = p;
- break;
- case '(':
- if ( !level ) lp = p;
- level++;
- break;
- case ')':
- if ( --level < 0 ) end = p;
- else rp = p;
- break;
- case '/':
- p = skipspace(p, 1) - 1;
- break;
- default:
- ;
- }
- }
- /* Erase any embedded prototype parameters. */
- if ( lp )
- writeblanks(lp + 1, rp);
- p--; /* back up over terminator */
- /* Find the name being declared. */
- /* This is complicated because of procedure and */
- /* array modifiers. */
- for ( ; ; )
- { p = skipspace(p - 1, -1);
- switch ( *p )
- {
- case ']': /* skip array dimension(s) */
- case ')': /* skip procedure args OR name */
- { int level = 1;
- while ( level )
- switch ( *--p )
- {
- case ']': case ')': level++; break;
- case '[': case '(': level--; break;
- case '/': p = skipspace(p, -1) + 1; break;
- default: ;
- }
- }
- if ( *p == '(' && *skipspace(p + 1, 1) == '*' )
- { /* We found the name being declared */
- while ( !isidfirstchar(*p) )
- p = skipspace(p, 1) + 1;
- goto found;
- }
- break;
- default:
- goto found;
- }
- }
-found: if ( *p == '.' && p[-1] == '.' && p[-2] == '.' )
- { if ( convert_varargs )
- { *bp++ = "va_alist";
- vararg = p-2;
- }
- else
- { p++;
- if ( bp == breaks + 1 ) /* sole argument */
- writeblanks(breaks[0], p);
- else
- writeblanks(bp[-1] - 1, p);
- bp--;
- }
- }
- else
- { while ( isidchar(*p) ) p--;
- *bp++ = p+1;
- }
- p = end;
- }
- while ( *p++ == ',' );
- *bp = p;
- /* Make a special check for 'void' arglist */
- if ( bp == breaks+2 )
- { p = skipspace(breaks[0], 1);
- if ( !strncmp(p, "void", 4) )
- { p = skipspace(p+4, 1);
- if ( p == breaks[2] - 1 )
- { bp = breaks; /* yup, pretend arglist is empty */
- writeblanks(breaks[0], p + 1);
- }
- }
- }
- /* Put out the function name and left parenthesis. */
- p = buf;
- while ( p != endfn ) putc(*p, out), p++;
- /* Put out the declaration. */
- if ( header )
- { fputs(");", out);
- for ( p = breaks[0]; *p; p++ )
- if ( *p == '\r' || *p == '\n' )
- putc(*p, out);
- }
- else
- { for ( ap = breaks+1; ap < bp; ap += 2 )
- { p = *ap;
- while ( isidchar(*p) )
- putc(*p, out), p++;
- if ( ap < bp - 1 )
- fputs(", ", out);
- }
- fputs(") ", out);
- /* Put out the argument declarations */
- for ( ap = breaks+2; ap <= bp; ap += 2 )
- (*ap)[-1] = ';';
- if ( vararg != 0 )
- { *vararg = 0;
- fputs(breaks[0], out); /* any prior args */
- fputs("va_dcl", out); /* the final arg */
- fputs(bp[0], out);
- }
- else
- fputs(breaks[0], out);
- }
- free((char *)breaks);
- return 0;
-}
+++ /dev/null
-# Makefile.in generated by automake 1.7 from Makefile.am.
-# @configure_input@
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Makefile.am for enscript tests.
-# Copyright (c) 1997 Markku Rossi
-#
-# Author: Markku Rossi <mtr@iki.fi>
-#
-
-#
-# This file is part of GNU enscript.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; see the file COPYING. If not, write to
-# the Free Software Foundation, 51 Franklin Street, Fifth Floor,
-# Boston, MA 02110-1301, USA.
-#
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ../..
-
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_triplet = @host@
-ACLOCAL = @ACLOCAL@
-ALLOCA = @ALLOCA@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
-CATOBJEXT = @CATOBJEXT@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DATADIRNAME = @DATADIRNAME@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GENCAT = @GENCAT@
-GLIBC21 = @GLIBC21@
-GMSGFMT = @GMSGFMT@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTOBJEXT = @INSTOBJEXT@
-INTLBISON = @INTLBISON@
-INTLLIBS = @INTLLIBS@
-INTLOBJS = @INTLOBJS@
-INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
-LDFLAGS = @LDFLAGS@
-LEX = @LEX@
-LEXLIB = @LEXLIB@
-LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MEDIA = @MEDIA@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-MSGFMT = @MSGFMT@
-MSGMERGE = @MSGMERGE@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-POSUB = @POSUB@
-PSLEVEL = @PSLEVEL@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SPOOLER = @SPOOLER@
-STRIP = @STRIP@
-U = @U@
-USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-YACC = @YACC@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__include = @am__include@
-am__quote = @am__quote@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-
-AUTOMAKE_OPTIONS =
-
-TESTS = ascii.test binary.test font.test columns.test pages.test \
-linenums.test hlbars.test indent.test filter.test borders.test \
-underlay.test toc.test falign.test slice.test escapes.test \
-headers.test media.test encodings.test passthrough.test \
-nup.test
-
-
-EXTRA_DIST = defs $(TESTS)
-subdir = src/tests
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-DIST_SOURCES =
-DIST_COMMON = ChangeLog Makefile.am Makefile.in
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu src/tests/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
-uninstall-info-am:
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-
-check-TESTS: $(TESTS)
- @failed=0; all=0; xfail=0; xpass=0; skip=0; \
- srcdir=$(srcdir); export srcdir; \
- list='$(TESTS)'; \
- if test -n "$$list"; then \
- for tst in $$list; do \
- if test -f ./$$tst; then dir=./; \
- elif test -f $$tst; then dir=; \
- else dir="$(srcdir)/"; fi; \
- if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
- all=`expr $$all + 1`; \
- case " $(XFAIL_TESTS) " in \
- *" $$tst "*) \
- xpass=`expr $$xpass + 1`; \
- failed=`expr $$failed + 1`; \
- echo "XPASS: $$tst"; \
- ;; \
- *) \
- echo "PASS: $$tst"; \
- ;; \
- esac; \
- elif test $$? -ne 77; then \
- all=`expr $$all + 1`; \
- case " $(XFAIL_TESTS) " in \
- *" $$tst "*) \
- xfail=`expr $$xfail + 1`; \
- echo "XFAIL: $$tst"; \
- ;; \
- *) \
- failed=`expr $$failed + 1`; \
- echo "FAIL: $$tst"; \
- ;; \
- esac; \
- else \
- skip=`expr $$skip + 1`; \
- echo "SKIP: $$tst"; \
- fi; \
- done; \
- if test "$$failed" -eq 0; then \
- if test "$$xfail" -eq 0; then \
- banner="All $$all tests passed"; \
- else \
- banner="All $$all tests behaved as expected ($$xfail expected failures)"; \
- fi; \
- else \
- if test "$$xpass" -eq 0; then \
- banner="$$failed of $$all tests failed"; \
- else \
- banner="$$failed of $$all tests did not behave as expected ($$xpass unexpected passes)"; \
- fi; \
- fi; \
- dashes="$$banner"; \
- skipped=""; \
- if test "$$skip" -ne 0; then \
- skipped="($$skip tests were not run)"; \
- test `echo "$$skipped" | wc -c` -gt `echo "$$banner" | wc -c` && \
- dashes="$$skipped"; \
- fi; \
- report=""; \
- if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
- report="Please report to $(PACKAGE_BUGREPORT)"; \
- test `echo "$$report" | wc -c` -gt `echo "$$banner" | wc -c` && \
- dashes="$$report"; \
- fi; \
- dashes=`echo "$$dashes" | sed s/./=/g`; \
- echo "$$dashes"; \
- echo "$$banner"; \
- test -n "$$skipped" && echo "$$skipped"; \
- test -n "$$report" && echo "$$report"; \
- echo "$$dashes"; \
- test "$$failed" -eq 0; \
- else :; fi
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = ../..
-distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkinstalldirs) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
- $(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile
-
-installdirs:
-
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -rm -f Makefile $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
-
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-exec-am:
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-info-am
-
-.PHONY: all all-am check check-TESTS check-am clean clean-generic \
- distclean distclean-generic distdir dvi dvi-am info info-am \
- install install-am install-data install-data-am install-exec \
- install-exec-am install-info install-info-am install-man \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-generic pdf pdf-am ps ps-am uninstall uninstall-am \
- uninstall-info-am
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-# Makefile.in generated by automake 1.7 from Makefile.am.
-# @configure_input@
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Makefile for states.
-# Copyright (c) 1997-2003 Markku Rossi
-#
-# Author: Markku Rossi <mtr@iki.fi>
-#
-
-#
-# This file is part of GNU enscript.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; see the file COPYING. If not, write to
-# the Free Software Foundation, 51 Franklin Street, Fifth Floor,
-# Boston, MA 02110-1301, USA.
-#
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
-
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_triplet = @host@
-ACLOCAL = @ACLOCAL@
-ALLOCA = @ALLOCA@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
-CATOBJEXT = @CATOBJEXT@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DATADIRNAME = @DATADIRNAME@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GENCAT = @GENCAT@
-GLIBC21 = @GLIBC21@
-GMSGFMT = @GMSGFMT@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTOBJEXT = @INSTOBJEXT@
-INTLBISON = @INTLBISON@
-INTLLIBS = @INTLLIBS@
-INTLOBJS = @INTLOBJS@
-INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
-LDFLAGS = @LDFLAGS@
-LEX = @LEX@
-LEXLIB = @LEXLIB@
-LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MEDIA = @MEDIA@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-MSGFMT = @MSGFMT@
-MSGMERGE = @MSGMERGE@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-POSUB = @POSUB@
-PSLEVEL = @PSLEVEL@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SPOOLER = @SPOOLER@
-STRIP = @STRIP@
-U = @U@
-USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-YACC = @YACC@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__include = @am__include@
-am__quote = @am__quote@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-
-SUBDIRS = hl tests
-
-AUTOMAKE_OPTIONS =
-
-bin_PROGRAMS = states
-
-states_SOURCES = main.c utils.c prims.c process.c gram.y lex.l
-states_SOURCES_windelta = \
- -gram.y \
- +gram.c \
- -lex.l \
- +lex.c
-
-
-LDADD = ../afmlib/libafm.a @LIBINTL@ ../compat/libcompat.a @LEXLIB@
-states_DEPENDENCIES = ../compat/libcompat.a
-
-noinst_HEADERS = defs.h gram.h
-
-EXTRA_DIST = TODO over.in enscript.el
-
-localedir = $(prefix)/share/locale
-
-bin_SCRIPTS = over
-
-AM_YFLAGS = -d
-
-INCLUDES = -I$(srcdir)/../compat -I$(srcdir)/../afmlib \
--I$(srcdir)/../intl -I../intl -DLOCALEDIR=\"$(localedir)\"
-
-
-INCLUDES_windelta = \
- +-I../w32 \
- --DLOCALEDIR=\"$(localedir)\"
-
-subdir = states
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-bin_PROGRAMS = states$(EXEEXT)
-PROGRAMS = $(bin_PROGRAMS)
-
-am_states_OBJECTS = main.$(OBJEXT) utils.$(OBJEXT) prims.$(OBJEXT) \
- process.$(OBJEXT) gram.$(OBJEXT) lex.$(OBJEXT)
-states_OBJECTS = $(am_states_OBJECTS)
-states_LDADD = $(LDADD)
-states_LDFLAGS =
-SCRIPTS = $(bin_SCRIPTS)
-
-
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/gram.Po ./$(DEPDIR)/lex.Po \
-@AMDEP_TRUE@ ./$(DEPDIR)/main.Po ./$(DEPDIR)/prims.Po \
-@AMDEP_TRUE@ ./$(DEPDIR)/process.Po ./$(DEPDIR)/utils.Po
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-LEXCOMPILE = $(LEX) $(LFLAGS) $(AM_LFLAGS)
-YACCCOMPILE = $(YACC) $(YFLAGS) $(AM_YFLAGS)
-DIST_SOURCES = $(states_SOURCES)
-HEADERS = $(noinst_HEADERS)
-
-
-RECURSIVE_TARGETS = info-recursive dvi-recursive pdf-recursive \
- ps-recursive install-info-recursive uninstall-info-recursive \
- all-recursive install-data-recursive install-exec-recursive \
- installdirs-recursive install-recursive uninstall-recursive \
- check-recursive installcheck-recursive
-DIST_COMMON = $(noinst_HEADERS) ChangeLog Makefile.am Makefile.in TODO \
- gram.c gram.h lex.c
-DIST_SUBDIRS = $(SUBDIRS)
-SOURCES = $(states_SOURCES)
-
-all: all-recursive
-
-.SUFFIXES:
-.SUFFIXES: .c .l .o .obj .y
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu states/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
-install-binPROGRAMS: $(bin_PROGRAMS)
- @$(NORMAL_INSTALL)
- $(mkinstalldirs) $(DESTDIR)$(bindir)
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- if test -f $$p \
- ; then \
- f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f"; \
- $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f || exit 1; \
- else :; fi; \
- done
-
-uninstall-binPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
- rm -f $(DESTDIR)$(bindir)/$$f; \
- done
-
-clean-binPROGRAMS:
- -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-gram.h: gram.c
- @if test ! -f $@; then \
- rm -f gram.c; \
- $(MAKE) gram.c; \
- else :; fi
-states$(EXEEXT): $(states_OBJECTS) $(states_DEPENDENCIES)
- @rm -f states$(EXEEXT)
- $(LINK) $(states_LDFLAGS) $(states_OBJECTS) $(states_LDADD) $(LIBS)
-binSCRIPT_INSTALL = $(INSTALL_SCRIPT)
-install-binSCRIPTS: $(bin_SCRIPTS)
- @$(NORMAL_INSTALL)
- $(mkinstalldirs) $(DESTDIR)$(bindir)
- @list='$(bin_SCRIPTS)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- if test -f $$d$$p; then \
- f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
- echo " $(binSCRIPT_INSTALL) $$d$$p $(DESTDIR)$(bindir)/$$f"; \
- $(binSCRIPT_INSTALL) $$d$$p $(DESTDIR)$(bindir)/$$f; \
- else :; fi; \
- done
-
-uninstall-binSCRIPTS:
- @$(NORMAL_UNINSTALL)
- @list='$(bin_SCRIPTS)'; for p in $$list; do \
- f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
- echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
- rm -f $(DESTDIR)$(bindir)/$$f; \
- done
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT) core *.core
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gram.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lex.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/prims.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/process.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utils.Po@am__quote@
-
-distclean-depend:
- -rm -rf ./$(DEPDIR)
-
-.c.o:
-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
-@am__fastdepCC_TRUE@ -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \
-@am__fastdepCC_TRUE@ then mv "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
-@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
-@am__fastdepCC_TRUE@ fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
-
-.c.obj:
-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \
-@am__fastdepCC_TRUE@ -c -o $@ `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'`; \
-@am__fastdepCC_TRUE@ then mv "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \
-@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \
-@am__fastdepCC_TRUE@ fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'`
-
-.l.c:
- $(LEXCOMPILE) `test -f $< || echo '$(srcdir)/'`$<
- sed '/^#/ s|$(LEX_OUTPUT_ROOT)\.c|$@|' $(LEX_OUTPUT_ROOT).c >$@
- rm -f $(LEX_OUTPUT_ROOT).c
-
-.y.c:
- $(YACCCOMPILE) `test -f '$<' || echo '$(srcdir)/'`$<
- sed '/^#/ s|y\.tab\.c|$@|' y.tab.c >$@
- rm -f y.tab.c
- if test -f y.tab.h; then \
- to=`echo "$*_H" | sed \
- -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/' \
- -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'`; \
- sed "/^#/ s/Y_TAB_H/$$to/g" y.tab.h >$*.ht; \
- rm -f y.tab.h; \
- if cmp -s $*.ht $*.h; then \
- rm -f $*.ht ;\
- else \
- mv $*.ht $*.h; \
- fi; \
- fi
- if test -f y.output; then \
- mv y.output $*.output; \
- fi
-uninstall-info-am:
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
- @set fnord $$MAKEFLAGS; amf=$$2; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
- @set fnord $$MAKEFLAGS; amf=$$2; \
- dot_seen=no; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- rev=''; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
- done; \
- rev="$$rev ."; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
- done && test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
- done
-
-ETAGS = etags
-ETAGSFLAGS =
-
-CTAGS = ctags
-CTAGSFLAGS =
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
- fi; \
- done; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$tags$$unique" \
- || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique
-
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = ..
-distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkinstalldirs) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -d $(distdir)/$$subdir \
- || mkdir $(distdir)/$$subdir \
- || exit 1; \
- (cd $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$(top_distdir)" \
- distdir=../$(distdir)/$$subdir \
- distdir) \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-recursive
-all-am: Makefile $(PROGRAMS) $(SCRIPTS) $(HEADERS)
-installdirs: installdirs-recursive
-installdirs-am:
- $(mkinstalldirs) $(DESTDIR)$(bindir) $(DESTDIR)$(bindir)
-
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -rm -f Makefile $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -rm -f gram.h
- -rm -f lex.c
- -rm -f gram.c
-clean: clean-recursive
-
-clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
-
-distclean: distclean-recursive
-
-distclean-am: clean-am distclean-compile distclean-depend \
- distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-exec-am: install-binPROGRAMS install-binSCRIPTS
-
-install-info: install-info-recursive
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS \
- uninstall-info-am
-
-uninstall-info: uninstall-info-recursive
-
-.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am clean \
- clean-binPROGRAMS clean-generic clean-recursive ctags \
- ctags-recursive distclean distclean-compile distclean-depend \
- distclean-generic distclean-recursive distclean-tags distdir \
- dvi dvi-am dvi-recursive info info-am info-recursive install \
- install-am install-binPROGRAMS install-binSCRIPTS install-data \
- install-data-am install-data-recursive install-exec \
- install-exec-am install-exec-recursive install-info \
- install-info-am install-info-recursive install-man \
- install-recursive install-strip installcheck installcheck-am \
- installdirs installdirs-am installdirs-recursive \
- maintainer-clean maintainer-clean-generic \
- maintainer-clean-recursive mostlyclean mostlyclean-compile \
- mostlyclean-generic mostlyclean-recursive pdf pdf-am \
- pdf-recursive ps ps-am ps-recursive tags tags-recursive \
- uninstall uninstall-am uninstall-binPROGRAMS \
- uninstall-binSCRIPTS uninstall-info-am uninstall-info-recursive \
- uninstall-recursive
-
-
-over: $(srcdir)/over.in
- sed 's%@LIBRARYDIR@%$(prefix)/share/enscript%g' \
- $(srcdir)/over.in > over
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-# Makefile.in generated by automake 1.7 from Makefile.am.
-# @configure_input@
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Automakefile for the highlighting rules.
-# Copyright (c) 1998-2003 Markku Rossi
-#
-# Author: Markku Rossi <mtr@iki.fi>
-#
-
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-#
-# along with this program; see the file COPYING. If not, write to
-# the Free Software Foundation, 51 Franklin Street, Fifth Floor,
-# Boston, MA 02110-1301, USA.
-#
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ../..
-
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_triplet = @host@
-ACLOCAL = @ACLOCAL@
-ALLOCA = @ALLOCA@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
-CATOBJEXT = @CATOBJEXT@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DATADIRNAME = @DATADIRNAME@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GENCAT = @GENCAT@
-GLIBC21 = @GLIBC21@
-GMSGFMT = @GMSGFMT@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTOBJEXT = @INSTOBJEXT@
-INTLBISON = @INTLBISON@
-INTLLIBS = @INTLLIBS@
-INTLOBJS = @INTLOBJS@
-INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
-LDFLAGS = @LDFLAGS@
-LEX = @LEX@
-LEXLIB = @LEXLIB@
-LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MEDIA = @MEDIA@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-MSGFMT = @MSGFMT@
-MSGMERGE = @MSGMERGE@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-POSUB = @POSUB@
-PSLEVEL = @PSLEVEL@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SPOOLER = @SPOOLER@
-STRIP = @STRIP@
-U = @U@
-USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-YACC = @YACC@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__include = @am__include@
-am__quote = @am__quote@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-
-misc = enscript.st describe_languages.st default_faces.st
-
-styles = style_emacs.st style_emacs_verbose.st style_ifh.st \
-style_a2ps.st style_msvc.st
-
-
-languages = lang_ansi.st lang_enscript.st lang_html.st \
-lang_overstrike.st lang_rtf.st lang_texinfo.st
-
-
-highlightings = ada.st asm.st awk.st bash.st c.st c_comment.st \
-c_ppline.st c_string.st changelog.st cpp.st csh.st delphi.st diff.st \
-diffs.st diffu.st elisp.st fortran.st fortran_pp.st haskell.st html.st \
-idl.st inf.st java.st javascript.st ksh.st m4.st mail.st makefile.st \
-matlab.st nroff.st objc.st outline.st pascal.st passthrough.st perl.st \
-postscript.st python.st pyrex.st rfc.st scheme.st sh.st skill.st \
-sql.st states.st synopsys.st tcl.st tcsh.st tex.st vba.st verilog.st \
-vhdl.st vrml.st wmlscript.st zsh.st
-
-
-states = $(misc) $(styles) $(languages) $(highlightings)
-
-EXTRA_DIST = $(states)
-subdir = states/hl
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-DIST_SOURCES =
-DIST_COMMON = ChangeLog Makefile.am Makefile.in
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu states/hl/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
-uninstall-info-am:
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = ../..
-distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkinstalldirs) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile
-
-installdirs:
-
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -rm -f Makefile $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
-
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-data-local
-
-install-exec-am:
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-info-am uninstall-local
-
-.PHONY: all all-am check check-am clean clean-generic distclean \
- distclean-generic distdir dvi dvi-am info info-am install \
- install-am install-data install-data-am install-data-local \
- install-exec install-exec-am install-info install-info-am \
- install-man install-strip installcheck installcheck-am \
- installdirs maintainer-clean maintainer-clean-generic \
- mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \
- uninstall-am uninstall-info-am uninstall-local
-
-
-install-data-local:
- $(top_srcdir)/mkinstalldirs $(datadir)/enscript
- $(top_srcdir)/mkinstalldirs $(datadir)/enscript/hl
- for f in $(states); do \
- $(INSTALL_DATA) $(srcdir)/$$f $(datadir)/enscript/hl/$$f; \
- done
-
-uninstall-local:
- rm -rf $(datadir)/enscript/hl
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-# Makefile.in generated by automake 1.7 from Makefile.am.
-# @configure_input@
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Makefile.am for states tests.
-# Copyright (c) 1997 Markku Rossi
-#
-# Author: Markku Rossi <mtr@iki.fi>
-#
-
-#
-# This file is part of GNU enscript.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; see the file COPYING. If not, write to
-# the Free Software Foundation, 51 Franklin Street, Fifth Floor,
-# Boston, MA 02110-1301, USA.
-#
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ../..
-
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_triplet = @host@
-ACLOCAL = @ACLOCAL@
-ALLOCA = @ALLOCA@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
-CATOBJEXT = @CATOBJEXT@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DATADIRNAME = @DATADIRNAME@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GENCAT = @GENCAT@
-GLIBC21 = @GLIBC21@
-GMSGFMT = @GMSGFMT@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTOBJEXT = @INSTOBJEXT@
-INTLBISON = @INTLBISON@
-INTLLIBS = @INTLLIBS@
-INTLOBJS = @INTLOBJS@
-INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
-LDFLAGS = @LDFLAGS@
-LEX = @LEX@
-LEXLIB = @LEXLIB@
-LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MEDIA = @MEDIA@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-MSGFMT = @MSGFMT@
-MSGMERGE = @MSGMERGE@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-POSUB = @POSUB@
-PSLEVEL = @PSLEVEL@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SPOOLER = @SPOOLER@
-STRIP = @STRIP@
-U = @U@
-USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-YACC = @YACC@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__include = @am__include@
-am__quote = @am__quote@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-
-AUTOMAKE_OPTIONS =
-
-TESTS = startrules.test namerules.test optionstate.test \
-firstmatch.test longestmatch.test icase.test vardef.test exprs.test \
-primconcat.test primfloat.test primgetenv.test primint.test \
-primlength.test primlist.test primprint.test primregexp.test \
-primregexp_syntax.test primregmatch.test primregsub.test \
-primregsuball.test primsprintf.test primstrcmp.test primstring.test \
-primstrncmp.test primsubstring.test
-
-
-EXTRA_DIST = defs tests.st $(TESTS)
-subdir = states/tests
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-DIST_SOURCES =
-DIST_COMMON = ChangeLog Makefile.am Makefile.in
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu states/tests/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
-uninstall-info-am:
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-
-check-TESTS: $(TESTS)
- @failed=0; all=0; xfail=0; xpass=0; skip=0; \
- srcdir=$(srcdir); export srcdir; \
- list='$(TESTS)'; \
- if test -n "$$list"; then \
- for tst in $$list; do \
- if test -f ./$$tst; then dir=./; \
- elif test -f $$tst; then dir=; \
- else dir="$(srcdir)/"; fi; \
- if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
- all=`expr $$all + 1`; \
- case " $(XFAIL_TESTS) " in \
- *" $$tst "*) \
- xpass=`expr $$xpass + 1`; \
- failed=`expr $$failed + 1`; \
- echo "XPASS: $$tst"; \
- ;; \
- *) \
- echo "PASS: $$tst"; \
- ;; \
- esac; \
- elif test $$? -ne 77; then \
- all=`expr $$all + 1`; \
- case " $(XFAIL_TESTS) " in \
- *" $$tst "*) \
- xfail=`expr $$xfail + 1`; \
- echo "XFAIL: $$tst"; \
- ;; \
- *) \
- failed=`expr $$failed + 1`; \
- echo "FAIL: $$tst"; \
- ;; \
- esac; \
- else \
- skip=`expr $$skip + 1`; \
- echo "SKIP: $$tst"; \
- fi; \
- done; \
- if test "$$failed" -eq 0; then \
- if test "$$xfail" -eq 0; then \
- banner="All $$all tests passed"; \
- else \
- banner="All $$all tests behaved as expected ($$xfail expected failures)"; \
- fi; \
- else \
- if test "$$xpass" -eq 0; then \
- banner="$$failed of $$all tests failed"; \
- else \
- banner="$$failed of $$all tests did not behave as expected ($$xpass unexpected passes)"; \
- fi; \
- fi; \
- dashes="$$banner"; \
- skipped=""; \
- if test "$$skip" -ne 0; then \
- skipped="($$skip tests were not run)"; \
- test `echo "$$skipped" | wc -c` -gt `echo "$$banner" | wc -c` && \
- dashes="$$skipped"; \
- fi; \
- report=""; \
- if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
- report="Please report to $(PACKAGE_BUGREPORT)"; \
- test `echo "$$report" | wc -c` -gt `echo "$$banner" | wc -c` && \
- dashes="$$report"; \
- fi; \
- dashes=`echo "$$dashes" | sed s/./=/g`; \
- echo "$$dashes"; \
- echo "$$banner"; \
- test -n "$$skipped" && echo "$$skipped"; \
- test -n "$$report" && echo "$$report"; \
- echo "$$dashes"; \
- test "$$failed" -eq 0; \
- else :; fi
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = ../..
-distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkinstalldirs) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
- $(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
-all-am: Makefile
-
-installdirs:
-
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -rm -f Makefile $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
-
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-exec-am:
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-info-am
-
-.PHONY: all all-am check check-TESTS check-am clean clean-generic \
- distclean distclean-generic distdir dvi dvi-am info info-am \
- install install-am install-data install-data-am install-exec \
- install-exec-am install-info install-info-am install-man \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-generic pdf pdf-am ps ps-am uninstall uninstall-am \
- uninstall-info-am
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-# Makefile.in generated by automake 1.7 from Makefile.am.
-# @configure_input@
-
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Makefile for the w32 stuffs.
-# Copyright (c) 1999 Markku Rossi
-#
-# Author: Markku Rossi <mtr@iki.fi>
-#
-
-#
-# This file is part of GNU enscript.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; see the file COPYING. If not, write to
-# the Free Software Foundation, 51 Franklin Street, Fifth Floor,
-# Boston, MA 02110-1301, USA.
-#
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
-
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-host_triplet = @host@
-ACLOCAL = @ACLOCAL@
-ALLOCA = @ALLOCA@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
-CATOBJEXT = @CATOBJEXT@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DATADIRNAME = @DATADIRNAME@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GENCAT = @GENCAT@
-GLIBC21 = @GLIBC21@
-GMSGFMT = @GMSGFMT@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTOBJEXT = @INSTOBJEXT@
-INTLBISON = @INTLBISON@
-INTLLIBS = @INTLLIBS@
-INTLOBJS = @INTLOBJS@
-INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
-LDFLAGS = @LDFLAGS@
-LEX = @LEX@
-LEXLIB = @LEXLIB@
-LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MEDIA = @MEDIA@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-MSGFMT = @MSGFMT@
-MSGMERGE = @MSGMERGE@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-POSUB = @POSUB@
-PSLEVEL = @PSLEVEL@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SPOOLER = @SPOOLER@
-STRIP = @STRIP@
-U = @U@
-USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-YACC = @YACC@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__include = @am__include@
-am__quote = @am__quote@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-
-noinst_HEADERS = dummypwd.h
-
-EXTRA_DIST = config.h gethostname.c getpwd.c getuid.c
-subdir = w32
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-DIST_SOURCES =
-HEADERS = $(noinst_HEADERS)
-
-DIST_COMMON = $(noinst_HEADERS) Makefile.am Makefile.in
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu w32/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
-uninstall-info-am:
-
-ETAGS = etags
-ETAGSFLAGS =
-
-CTAGS = ctags
-CTAGSFLAGS =
-
-tags: TAGS
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(ETAGS_ARGS)$$tags$$unique" \
- || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique
-
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = ..
-distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkinstalldirs) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(HEADERS)
-
-installdirs:
-
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -rm -f Makefile $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
-
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-exec-am:
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-info-am
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic ctags \
- distclean distclean-generic distclean-tags distdir dvi dvi-am \
- info info-am install install-am install-data install-data-am \
- install-exec install-exec-am install-info install-info-am \
- install-man install-strip installcheck installcheck-am \
- installdirs maintainer-clean maintainer-clean-generic \
- mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \
- uninstall uninstall-am uninstall-info-am
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT: