-# Makefile.in generated by automake 1.7 from Makefile.am.
+# Makefile.in generated by automake 1.16.5 from Makefile.am.
# @configure_input@
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
-# Free Software Foundation, Inc.
+# Copyright (C) 1994-2021 Free Software Foundation, Inc.
+
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
#
#
-# This program is free software; you can redistribute it and/or modify
+# Enscript is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
#
-# This program is distributed in the hope that it will be useful,
+# Enscript is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
#
-# along with this program; see the file COPYING. If not, write to
-# the Free Software Foundation, 51 Franklin Street, Fifth Floor,
-# Boston, MA 02110-1301, USA.
+# along with Enscript. If not, see <http://www.gnu.org/licenses/>.
#
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
VPATH = @srcdir@
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
+ esac; \
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
-
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
+build_triplet = @build@
host_triplet = @host@
+subdir = docs
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
+ $(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
+ $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
+ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/version.texi \
+ $(srcdir)/stamp-vti $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
+SOURCES =
+DIST_SOURCES =
+AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
+am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
+am__v_DVIPS_0 = @echo " DVIPS " $@;
+am__v_DVIPS_1 =
+AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
+am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
+am__v_MAKEINFO_0 = @echo " MAKEINFO" $@;
+am__v_MAKEINFO_1 =
+AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
+am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
+am__v_INFOHTML_0 = @echo " INFOHTML" $@;
+am__v_INFOHTML_1 =
+AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
+am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
+am__v_TEXI2DVI_0 = @echo " TEXI2DVI" $@;
+am__v_TEXI2DVI_1 =
+AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
+am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
+am__v_TEXI2PDF_0 = @echo " TEXI2PDF" $@;
+am__v_TEXI2PDF_1 =
+AM_V_texinfo = $(am__v_texinfo_@AM_V@)
+am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
+am__v_texinfo_0 = -q
+am__v_texinfo_1 =
+AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
+am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
+am__v_texidevnull_0 = > /dev/null
+am__v_texidevnull_1 =
+INFO_DEPS = $(srcdir)/enscript.info
+am__TEXINFO_TEX_DIR = $(srcdir)
+DVIS = enscript.dvi
+PDFS = enscript.pdf
+PSS = enscript.ps
+HTMLS = enscript.html
+TEXINFOS = enscript.texi
+TEXI2DVI = texi2dvi
+TEXI2PDF = $(TEXI2DVI) --pdf --batch
+MAKEINFOHTML = $(MAKEINFO) --html
+AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
+DVIPS = dvips
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+man1dir = $(mandir)/man1
+NROFF = nroff
+MANS = $(man_MANS)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(enscript_TEXINFOS) $(srcdir)/Makefile.in mdate-sh \
+ texinfo.tex
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
ALLOCA = @ALLOCA@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
-BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
-CATOBJEXT = @CATOBJEXT@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
+CSCOPE = @CSCOPE@
+CTAGS = @CTAGS@
CYGPATH_W = @CYGPATH_W@
-DATADIRNAME = @DATADIRNAME@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
+ENCODING = @ENCODING@
+ETAGS = @ETAGS@
EXEEXT = @EXEEXT@
-GENCAT = @GENCAT@
-GLIBC21 = @GLIBC21@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTOBJEXT = @INSTOBJEXT@
-INTLBISON = @INTLBISON@
INTLLIBS = @INTLLIBS@
-INTLOBJS = @INTLOBJS@
-INTL_LIBTOOL_SUFFIX_PREFIX = @INTL_LIBTOOL_SUFFIX_PREFIX@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
LDFLAGS = @LDFLAGS@
LEX = @LEX@
LEXLIB = @LEXLIB@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MEDIA = @MEDIA@
-MKINSTALLDIRS = @MKINSTALLDIRS@
+MKDIR_P = @MKDIR_P@
MSGFMT = @MSGFMT@
MSGMERGE = @MSGMERGE@
+MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
POSUB = @POSUB@
PSLEVEL = @PSLEVEL@
RANLIB = @RANLIB@
+SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SPOOLER = @SPOOLER@
STRIP = @STRIP@
-U = @U@
-USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
YACC = @YACC@
+YFLAGS = @YFLAGS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
+am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
+builddir = @builddir@
datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
+htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
+localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
+mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
+psdir = @psdir@
+runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
-
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
info_TEXINFOS = enscript.texi
-
+enscript_TEXINFOS = fdl-1.3.texi
man_MANS = enscript.1 states.1
-
-EXTRA_DIST = enscript.man states.man FAQ.html clean-nroff.pl texinfo.tex
+CLEANFILES = $(man_MANS)
+EXTRA_DIST = ChangeLog.old enscript.man states.man FAQ.html \
+ clean-nroff.pl texinfo.tex
SUFFIXES = .1 .man
-subdir = docs
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-DIST_SOURCES =
-am__TEXINFO_TEX_DIR = $(srcdir)
-INFO_DEPS = enscript.info
-DVIS = enscript.dvi
-PDFS = enscript.pdf
-PSS = enscript.ps
-TEXINFOS = enscript.texi
-
-NROFF = nroff
-MANS = $(man_MANS)
-DIST_COMMON = ChangeLog Makefile.am Makefile.in mdate-sh stamp-vti \
- texinfo.tex version.texi
all: all-am
.SUFFIXES:
-.SUFFIXES: .1 .man .dvi .info .pdf .ps .texi
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu docs/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+.SUFFIXES: .1 .man .dvi .html .info .pdf .ps .texi
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu docs/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --gnu docs/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
.texi.info:
- @rm -f $@ $@-[0-9] $@-[0-9][0-9]
- $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
- `test -f '$<' || echo '$(srcdir)/'`$< -o $@
+ $(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \
+ am__cwd=`pwd` && $(am__cd) $(srcdir) && \
+ rm -rf $$backupdir && mkdir $$backupdir && \
+ if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
+ for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
+ if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
+ done; \
+ else :; fi && \
+ cd "$$am__cwd"; \
+ if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
+ -o $@ $<; \
+ then \
+ rc=0; \
+ $(am__cd) $(srcdir); \
+ else \
+ rc=$$?; \
+ $(am__cd) $(srcdir) && \
+ $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
+ fi; \
+ rm -rf $$backupdir; exit $$rc
.texi.dvi:
- TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+ $(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
- $(TEXI2DVI) `test -f '$<' || echo '$(srcdir)/'`$<
+ $(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \
+ $<
.texi.pdf:
- TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+ $(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
- $(TEXI2PDF) `test -f '$<' || echo '$(srcdir)/'`$<
-enscript.info: enscript.texi version.texi
-enscript.dvi: enscript.texi version.texi
-enscript.pdf: enscript.texi version.texi
-version.texi: stamp-vti
-stamp-vti: enscript.texi $(top_srcdir)/configure.in
+ $(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \
+ $<
+
+.texi.html:
+ $(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
+ $(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
+ -o $(@:.html=.htp) $<; \
+ then \
+ rm -rf $@ && mv $(@:.html=.htp) $@; \
+ else \
+ rm -rf $(@:.html=.htp); exit 1; \
+ fi
+$(srcdir)/enscript.info: enscript.texi $(srcdir)/version.texi $(enscript_TEXINFOS)
+enscript.dvi: enscript.texi $(srcdir)/version.texi $(enscript_TEXINFOS)
+enscript.pdf: enscript.texi $(srcdir)/version.texi $(enscript_TEXINFOS)
+enscript.html: enscript.texi $(srcdir)/version.texi $(enscript_TEXINFOS)
+$(srcdir)/version.texi: $(srcdir)/stamp-vti
+$(srcdir)/stamp-vti: enscript.texi $(top_srcdir)/configure
@(dir=.; test -f ./enscript.texi || dir=$(srcdir); \
set `$(SHELL) $(srcdir)/mdate-sh $$dir/enscript.texi`; \
echo "@set UPDATED $$1 $$2 $$3"; \
echo "@set UPDATED-MONTH $$2 $$3"; \
echo "@set EDITION $(VERSION)"; \
- echo "@set VERSION $(VERSION)") > vti.tmp
- @cmp -s vti.tmp version.texi \
- || (echo "Updating version.texi"; \
- cp vti.tmp version.texi)
- -@rm -f vti.tmp
- @cp version.texi $@
+ echo "@set VERSION $(VERSION)") > vti.tmp$$$$ && \
+ (cmp -s vti.tmp$$$$ $(srcdir)/version.texi \
+ || (echo "Updating $(srcdir)/version.texi" && \
+ cp vti.tmp$$$$ $(srcdir)/version.texi.tmp$$$$ && \
+ mv $(srcdir)/version.texi.tmp$$$$ $(srcdir)/version.texi)) && \
+ rm -f vti.tmp$$$$ $(srcdir)/version.texi.$$$$
+ @cp $(srcdir)/version.texi $@
mostlyclean-vti:
- -rm -f vti.tmp
+ -rm -f vti.tmp* $(srcdir)/version.texi.tmp*
maintainer-clean-vti:
- -rm -f stamp-vti version.texi
-TEXI2DVI = texi2dvi
-
-TEXI2PDF = $(TEXI2DVI) --pdf --batch
-DVIPS = dvips
+ -rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
.dvi.ps:
- $(DVIPS) $< -o $@
+ $(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+ $(DVIPS) $(AM_V_texinfo) -o $@ $<
+
+uninstall-dvi-am:
+ @$(NORMAL_UNINSTALL)
+ @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
+ for p in $$list; do \
+ $(am__strip_dir) \
+ echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
+ rm -f "$(DESTDIR)$(dvidir)/$$f"; \
+ done
+
+uninstall-html-am:
+ @$(NORMAL_UNINSTALL)
+ @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
+ for p in $$list; do \
+ $(am__strip_dir) \
+ echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
+ rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
+ done
uninstall-info-am:
- $(PRE_UNINSTALL)
- @if (install-info --version && \
- install-info --version | grep -i -v debian) >/dev/null 2>&1; then \
+ @$(PRE_UNINSTALL)
+ @if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
list='$(INFO_DEPS)'; \
for file in $$list; do \
- echo " install-info --info-dir=$(DESTDIR)$(infodir) --remove $(DESTDIR)$(infodir)/$$file"; \
- install-info --info-dir=$(DESTDIR)$(infodir) --remove $(DESTDIR)$(infodir)/$$file; \
+ relfile=`echo "$$file" | sed 's|^.*/||'`; \
+ echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
+ if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
+ then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
done; \
else :; fi
@$(NORMAL_UNINSTALL)
@list='$(INFO_DEPS)'; \
for file in $$list; do \
- (if cd $(DESTDIR)$(infodir); then \
- echo " rm -f $$file $$file-[0-9] $$file-[0-9][0-9])"; \
- rm -f $$file $$file-[0-9] $$file-[0-9][0-9]; \
+ relfile=`echo "$$file" | sed 's|^.*/||'`; \
+ relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
+ (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
+ echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
+ rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
else :; fi); \
done
+uninstall-pdf-am:
+ @$(NORMAL_UNINSTALL)
+ @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+ for p in $$list; do \
+ $(am__strip_dir) \
+ echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
+ rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
+ done
+
+uninstall-ps-am:
+ @$(NORMAL_UNINSTALL)
+ @list='$(PSS)'; test -n "$(psdir)" || list=; \
+ for p in $$list; do \
+ $(am__strip_dir) \
+ echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
+ rm -f "$(DESTDIR)$(psdir)/$$f"; \
+ done
+
dist-info: $(INFO_DEPS)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
list='$(INFO_DEPS)'; \
for base in $$list; do \
+ case $$base in \
+ $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
+ esac; \
if test -f $$base; then d=.; else d=$(srcdir); fi; \
- for file in $$d/$$base*; do \
- relfile=`expr "$$file" : "$$d/\(.*\)"`; \
- test -f $(distdir)/$$relfile || \
- cp -p $$file $(distdir)/$$relfile; \
+ base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
+ for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
+ if test -f $$file; then \
+ relfile=`expr "$$file" : "$$d/\(.*\)"`; \
+ test -f "$(distdir)/$$relfile" || \
+ cp -p $$file "$(distdir)/$$relfile"; \
+ else :; fi; \
done; \
done
mostlyclean-aminfo:
- -rm -f enscript.aux enscript.cp enscript.cps enscript.fn enscript.ky \
- enscript.log enscript.pg enscript.tmp enscript.toc \
- enscript.tp enscript.vr enscript.dvi enscript.pdf enscript.ps
+ -rm -rf enscript.t2d enscript.t2p
+
+clean-aminfo:
+ -test -z "enscript.dvi enscript.pdf enscript.ps enscript.html" \
+ || rm -rf enscript.dvi enscript.pdf enscript.ps enscript.html
maintainer-clean-aminfo:
- list='$(INFO_DEPS)'; for i in $$list; do \
- rm -f $$i; \
- if test "`echo $$i-[0-9]*`" != "$$i-[0-9]*"; then \
- rm -f $$i-[0-9]*; \
- fi; \
+ @list='$(INFO_DEPS)'; for i in $$list; do \
+ i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
+ echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
+ rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
done
-
-man1dir = $(mandir)/man1
-install-man1: $(man1_MANS) $(man_MANS)
+install-man1: $(man_MANS)
@$(NORMAL_INSTALL)
- $(mkinstalldirs) $(DESTDIR)$(man1dir)
- @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.1*) list="$$list $$i" ;; \
- esac; \
+ @list1=''; \
+ list2='$(man_MANS)'; \
+ test -n "$(man1dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.1[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+ fi; \
done; \
- for i in $$list; do \
- if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
- else file=$$i; fi; \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- case "$$ext" in \
- 1*) ;; \
- *) ext='1' ;; \
- esac; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \
- $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \
- done
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+ done; }
+
uninstall-man1:
@$(NORMAL_UNINSTALL)
- @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
- case "$$i" in \
- *.1*) list="$$list $$i" ;; \
- esac; \
- done; \
- for i in $$list; do \
- ext=`echo $$i | sed -e 's/^.*\\.//'`; \
- inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
- inst=`echo $$inst | sed '$(transform)'`.$$ext; \
- echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \
- rm -f $(DESTDIR)$(man1dir)/$$inst; \
- done
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-
-top_distdir = ..
-distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- esac; \
+ @list=''; test -n "$(man1dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.1[a-z]*$$/p'; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
+tags TAGS:
+
+ctags CTAGS:
+
+cscope cscopelist:
+
+distdir: $(BUILT_SOURCES)
+ $(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkinstalldirs) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-am
all-am: Makefile $(INFO_DEPS) $(MANS)
-
installdirs:
- $(mkinstalldirs) $(DESTDIR)$(infodir) $(DESTDIR)$(man1dir)
-
+ for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
installcheck: installcheck-am
install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
mostlyclean-generic:
clean-generic:
+ -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
- -rm -f Makefile $(CONFIG_CLEAN_FILES)
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
-clean-am: clean-generic mostlyclean-am
+clean-am: clean-aminfo clean-generic mostlyclean-am
distclean: distclean-am
-
+ -rm -f Makefile
distclean-am: clean-am distclean-generic
dvi: dvi-am
dvi-am: $(DVIS)
+html: html-am
+
+html-am: $(HTMLS)
+
info: info-am
info-am: $(INFO_DEPS)
install-data-am: install-info-am install-man
+install-dvi: install-dvi-am
+
+install-dvi-am: $(DVIS)
+ @$(NORMAL_INSTALL)
+ @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
+ done
install-exec-am:
+install-html: install-html-am
+
+install-html-am: $(HTMLS)
+ @$(NORMAL_INSTALL)
+ @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ $(am__strip_dir) \
+ d2=$$d$$p; \
+ if test -d "$$d2"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
+ $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
+ echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
+ $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
+ else \
+ list2="$$list2 $$d2"; \
+ fi; \
+ done; \
+ test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
+ done; }
install-info: install-info-am
install-info-am: $(INFO_DEPS)
@$(NORMAL_INSTALL)
- $(mkinstalldirs) $(DESTDIR)$(infodir)
- @list='$(INFO_DEPS)'; \
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
+ fi; \
for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ esac; \
if test -f $$file; then d=.; else d=$(srcdir); fi; \
- for ifile in echo $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9]; do \
+ file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
+ for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
+ $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
if test -f $$ifile; then \
- relfile=`expr "$$ifile" : "$$d/\(.*\)"`; \
- echo " $(INSTALL_DATA) $$ifile $(DESTDIR)$(infodir)/$$relfile"; \
- $(INSTALL_DATA) $$ifile $(DESTDIR)$(infodir)/$$relfile; \
+ echo "$$ifile"; \
else : ; fi; \
done; \
- done
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
@$(POST_INSTALL)
- @if (install-info --version && \
- install-info --version | grep -i -v debian) >/dev/null 2>&1; then \
- list='$(INFO_DEPS)'; \
+ @if $(am__can_run_installinfo); then \
+ list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
for file in $$list; do \
- echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\
- install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\
+ relfile=`echo "$$file" | sed 's|^.*/||'`; \
+ echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
+ install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
done; \
else : ; fi
install-man: install-man1
+install-pdf: install-pdf-am
+
+install-pdf-am: $(PDFS)
+ @$(NORMAL_INSTALL)
+ @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
+install-ps: install-ps-am
+
+install-ps-am: $(PSS)
+ @$(NORMAL_INSTALL)
+ @list='$(PSS)'; test -n "$(psdir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
installcheck-am:
maintainer-clean: maintainer-clean-am
-
+ -rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
maintainer-clean-generic maintainer-clean-vti
ps-am: $(PSS)
-uninstall-am: uninstall-info-am uninstall-man
+uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
+ uninstall-man uninstall-pdf-am uninstall-ps-am
uninstall-man: uninstall-man1
-.PHONY: all all-am check check-am clean clean-generic dist-info \
- distclean distclean-generic distdir dvi dvi-am info info-am \
- install install-am install-data install-data-am install-exec \
- install-exec-am install-info install-info-am install-man \
- install-man1 install-strip installcheck installcheck-am \
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-aminfo clean-generic \
+ cscopelist-am ctags-am dist-info distclean distclean-generic \
+ distdir dvi dvi-am html html-am info info-am install \
+ install-am install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-html \
+ install-html-am install-info install-info-am install-man \
+ install-man1 install-pdf install-pdf-am install-ps \
+ install-ps-am install-strip installcheck installcheck-am \
installdirs maintainer-clean maintainer-clean-aminfo \
maintainer-clean-generic maintainer-clean-vti mostlyclean \
mostlyclean-aminfo mostlyclean-generic mostlyclean-vti pdf \
- pdf-am ps ps-am uninstall uninstall-am uninstall-info-am \
- uninstall-man uninstall-man1
+ pdf-am ps ps-am tags-am uninstall uninstall-am \
+ uninstall-dvi-am uninstall-html-am uninstall-info-am \
+ uninstall-man uninstall-man1 uninstall-pdf-am uninstall-ps-am
+
+.PRECIOUS: Makefile
enscript.man.html: enscript.1
.man.1:
sed 's%@DATADIR@%$(datadir)%g; s%@media@%@MEDIA@%g; s%@SYSCONFDIR@%$(sysconfdir)%g' \
$< > $@
+
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: