Simplify compiler detection.

[enscript.git] / lib / enscript.cfg.in

#
# GNU Enscript configuration file.
# Copyright (c) 1995-1998 Markku Rossi.
#
# Author: Markku Rossi <mtr@iki.fi>
#
#
#
# This file is part of GNU enscript.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; see the file COPYING.  If not, write to
# the Free Software Foundation, 51 Franklin Street, Fifth Floor,
# Boston, MA 02110-1301, USA.
#

# Do we accept PostScript font's composite characters?  As a default,
# this is false because I think this is GhostScript dependant.
AcceptCompositeCharacters: 0

# Lookup path for the AFM files.
AFMPath: @DATADIR@/enscript/afm:/usr/local/lib/ps:/usr/lib/ps

# Append ^D character to the end of the output.  Some printers like HP
# LaserJet 5 require this but the default is `false'.
AppendCtrlD: 0

# How characters greater than 127 are printed:
#   1   generate clean 7-bit code; print characters greater than 127
#       in the backslash-octal notation `\xxx' (default)
#   0   generate 8-bit code
Clean7Bit: 1

# Default input encoding.
DefaultEncoding: latin1

# Default fancy header.
DefaultFancyHeader: enscript

# Default output media.
DefaultMedia: @media@

# Where output goes as a default: `printer' or `stdout'
DefaultOutputMethod: printer

# Include following font files to all PostScript outputs.
#
# DownloadFont: FooFont1
# DownloadFont: FooFont2

# The escape character for special escapes.
EscapeChar: 0

# What to do when a formfeed character is encountered from input:
#  column       move to the beginning of the next column
#  page         move to the beginning of the next page
FormFeedType: column

# Specify whether the PageSize page device option is generated to the
# output.
GeneratePageSize: 1

# The gray level which is used to print highlight bars.
HighlightBarGray: .97

# How high highlight bars are in lines.  The default is 0 so no
# highlight bars are printed.
# HighlightBars: 2

# Library path.  Let's use built-in default.
# LibraryPath:

# How wrapped lines are marked in printout.  Possible values are: `none',
# `plus', `box' and `arrow'.  As a default, we do not mark them.
MarkWrappedLines: none

# Media definitions:
#       name            width   height  llx     lly     urx     ury
Media:  A3              842     1190    24      24      818     1166
Media:  A4              595     842     24      24      571     818
Media:  A5              420     595     24      24      396     571
Media:  Legal           612     1008    24      24      588     984
Media:  Letter          612     792     38      24      574     768

# HP DeskJet media (DeskJet can't print on the bottom 1/2" of the paper).
Media:  A4dj            595     842     24      50      571     818
Media:  Letterdj        612     792     24      40      588     768

# Spooler option to suppress the job header.
NoJobHeaderSwitch: -h

# How non-printable characters are printed: `caret', `octal',
# `questionmark' or `space'.
NonPrintableFormat: octal

# PostScript output's first line.
OutputFirstLine: %!PS-Adobe-3.0

# Default page label format: `short' or `long'.
PageLabelFormat: short

# Enable / disable page prefeed.
PagePrefeed: 0

# The PostScript language level that enscript should use.
PostScriptLevel: @pslevel@

# Printer name to spool to.  As a default we want to use system's
# default printer.
# Printer: ps

# The spooler command switch to select the printer queue.  This option
# can also be used to pass other flags to the spooler command but they
# must be given bofore the queue switch.
QueueParam: -P

# Pass following Page Device options to the generated output.
#
# Duplex printing.
# SetPageDevice: Duplex:true

# Printer spooler command name.
Spooler: @spooler@

# An absolute path to the states program.
StatesBinary: @BINDIR@/states

# Create color outputs with States?
StatesColor: 0

# The name of the States configuration file.
StatesConfigFile: @DATADIR@/enscript/hl/enscript.st

# States' default highlight style.
StatesHighlightStyle: emacs

# Path for the States program.
# StatesPath: @DATADIR@/enscript/hl

# Pass following statusdict options to the generated output.
#
# Use always paper tray 1.
# StatusDict: setpapertray:1

# Format string for table-of-contents entries.
#
# TOCFormat: $3v $-40N $3% pages $4L lines  $E $C

# As a default, print this underlay text to all document.
# Underlay: mtr's printout

# Underlay text angle.
# UnderlayAngle: 45

# Select underlay font.
UnderlayFont: Times-Roman200

# Select underlay gray.
UnderlayGray: .8

# Underlay text starting position.
# UnderlayPosition: +0-0

# Underlay style: `outline' or `filled'
UnderlayStyle: outline

# EOF