Fresh Out of the Kiln

I popped over to the college this afternoon to see if the latest kiln firing was done, cooled and unloaded.  It was!  Yay!  I was able to pick up the last of my projects.  I'm really excited about some of them and can't wait to share...

One of my goals for the semester was to make a large bowl.  I definitely made progress toward that.  This is the biggest bowl I've made so far and it's quite an accomplishment.  The larger a piece is, the harder it is to throw on the wheel...and to get it to be round and not lop-sided.   It shrunk a bit in the kiln (which always happens) but it's still pretty big. If I take ceramics again, my goal will be to make one even bigger! 

This clay must have had a lot of iron it because the bowl developed lots of freckles when it was fired.

I love the yellow and rust color in Winokur Yellow glaze.

It's not as big as I'd wanted but will be plenty big enough to make something in it to serve my family.

It's 8" tall and 4" wide.  I placed a regular sized garlic head next to it to give an idea of it's size and scale.

Before the semester was over, I had to try throwing on a kick wheel.  It's powered by my foot only.  No electricity.  It worked better than I'd expected.  To get better at it I'll have to remember to let go of my clay whenever I kick to get the speed back up.  I learned that the hard way.  If I kick while my hands are working with the clay, it immediately sends it off center and I end up with wonkey, lop sided pots.  They're also a bit thick on the bottoms because I wasn't able to lift them up much more after they lost center.  But, I'm pretty proud of them for my first try.  And, what fun!  I love that I made them with human power.  It was a quiet and peaceful, creative experience. 

This one resembles my honey pot vases.  It looks great with the other two and gives me a perfect set of three in various sizes.  I plan to put some flowers in them very soon and try it out as a little grouping.

I took a picture holding it to give an idea of the size these two kick wheel pots are. 

My third attempt at a goblet went much better than the first two.  But, it still wasn't all that great...until I picked it up today.  The glazes I used transformed it into something pretty cool!

I used Teadust glaze on the outside. It's usually black in color with green speckles. Turns out it also red in it.  There are even some tiny blue flecks.  It's interesting and lovely.  I really like it.  The tiny greenish/yellow flecks remind me of lichen we see on rocks when we hike. 

I used a green glaze on the inside that I thought would tie in with the specks on the outside.  Turns out it would have been pretty light.  Luckily, I was inspired by another student and how she had experimented with mixing different glazes.  She had some fantastic results.  So, I grabbed my goblet and headed back to the glaze room and put a little splattering action into the project.  It turned out to be just what it needed to tie the outside and inside together.  I love it!

The stem fits and feels very nice in my hand.  It's very comfortable.  The goblet is almost 8" tall and holds exactly eight ounces of liquid.  I think that will make for nice sized serving of wine...to start with.  I plan on trying it out tonight.  Cheers!

Lovely Lizards and a Bevy of Bowls

I've just finished 18 weeks that I will cherish for the rest of my life!  My daughter and I took another ceramics class together and had a blast!   This is the second semester we've done this.  I feel so lucky to have a daughter that loves to hang out with her mom.  I treasure every moment of it!  She'll be transferring to a university in a few months.  So, this will be the last time we'll get to do this for a while.  That chokes me up a bit but I know we have lots of new adventures ahead of us.

If you're a regular visitor to my blog, you may recall a blog post I did a few months ago about a lizard I had sculpted in class.  I had a lot of fun making it and was pretty pleased with the results.  Since then, he's undergone a bit of a change...glazing.  It didn't turn out quite like I'd planned.  He was supposed to be sort of a greenish color and the cup was supposed to be a deep chocolate brown.  Being the beginner that I am and that the glazes aren't always reliable, I ended up with this...

It's not what I had envisioned but it's kinda cool.  I made it for hubby and he really likes it.  So, that means it's a success.

That lizard inspired others in my class and other classes that saw it.  Someone even called me the "lizard master" one evening during class.  That was fun!   

I enjoyed sculpting the first one so much that I was anxious to make another one and I did.  This time it adorned my very first teapot.  The spout was challenging but I did it.  The lid was challenging too and it came out a bit large.  That made it the perfect place for a lizard to sit!

I chose the same glaze, Winokur Yellow, that I used on my Acorn Mugs last semester.  I usually like the yellow color with bits of rusty orange.  And, it's usually a reliable glaze.  However, it seems that the bag of clay I used on this and a few other projects had a lot of iron in it.  So, they came out of the kiln with lots of freckles!

I'm really happy with the shape of the teapot, the lizard, and the yellow and orange colors. 

But, I'm still trying to fall in love with all those freckles.

The yellow parts are satiny smooth and make the lizard fun to pet!

I'm planning to make a pot of tea tonight.  I can't wait to try out my new teapot!

I love his shape.  So cute!

One of the freckles could be an eye!

I practiced a LOT on the wheel to learn and improve my skills.  The teacher was very encouraging about not worrying about assignments but to just keep working because it's the best way to improve.  I appreciated that.  It made the semester very productive.  I made close to 40 projects!

One of my goals for the semester was to make a large bowl that was big enough to make a salad for the family.  That's not as easy as it sounds.  The bigger the project, the harder it is to make on the wheel.  So, I practiced a lot and made a lot of bowls!

I tried to make a set to go with my Acorn Mugs and Lizard Teapot.  I ended up with three that are almost exactly the same size. I made them with the same bag of clay I used on the teapot and they ended up with a lot of spots.

I named the set, "Funny Freckles".

These bowls were made with a different bag of clay and the color turned out great...more like what I'd hoped for the above projects.  I like it when I can get a perfect little spiral in the bottom and get it to show up. 

 

I had a lot of fun making these.  I call them, "Honey Pot Vases". 

As you can see, these were made with clay from two different bags!

I think they'll look really cute with flowers in them.

Here's another "Honey Pot Vase" glazed in "Woo blue".  I love the blue/green drips.  So pretty!

Woo Blue glaze seems to be a bit unpredictable.  It turned out mostly brown in the vase above.  But, in this bowl, it turned out more blue.  I love that color!  The toasty brown edge is a nice touch.  The inside is solid white.

I named this one, "Zen".

This bowl turned out pretty big.  It'll work for a nice personal salad.  I can't wait to try it!  The glaze I used was supposed to be green but I think i got it a little too thin.  I love the tan color and the simple, natural look of it though.

I have LOTS more projects but I figured this was enough for now.

It seems to have been a very productive semester for a lot of students and the kilns are so backed up that they're still working on firing everything.  So, I don't have my biggest bowl and some other projects back yet. 

I can't wait to see how they turn out!  It still amazes me what can be made with mud and heat!  And, how great it feels to use a ceramic piece that I made with my own two hands.

Having Fun and Letting Go

I've always been a perfectionist. I think that's a good thing in a lot of ways. It helps me keep high standards for myself in what I do and what I create. It's also been a tough thing to deal with at times. Tough when something is as good as it's going to get and perfect is not an option. Tough when there's no such thing as perfect. Tough when I worry that I'll be judged based on perfection and I won't let less than perfect be okay. Tough when just having fun would be the perfect thing.

Over the years, I've noticed myself slowly letting the perfection thing loosen a bit. I'm learning that there's no such thing as perfect in some things. I'm learning that my idea of perfection may not be other people's idea of perfection. I'm learning that others may not judge me or like me based on perfection or lack of. In fact, they might like me better if I just relax a bit. I'm also learning to let go of it sometimes and just enjoy the process of doing. The ceramics class I took with my daughter this semester was a perfect exercise in letting go of perfection.

I learned pretty early in the semester that clay can't always be told what to do. It can be manipulated but I have to learn to let it speak and go with that too. The type of clay, the thickness, wetness or dryness of it, the weather and my skill or lack of have huge roles in what the clay will or will not become. Then, the glazes seem to have a mind of their own. They don't always turn out the exact color that was hoped for. The thickness or thinness of it's application and the way the piece was fired prior to glazing and other forces affect it. So...it's best to let go and enjoy the ride.

The semester just ended and all of my pieces are done. Here are some of my projects and how my ride turned out...

One of the first assignments was to roll out clay into slabs and create three plates. I cut out a circle and placed a rolled piece of clay underneath the edge to create a raised edge and hold it up while it dried. I decorated this one with handmade leaves and berries. The plate projects were painted with colored slip (wet, soupy clay colored with minerals) and covered in a clear glaze to make them shiney. The colors didn't always come out as planned. The white on this plate, in spite of many coats, came out blotchy. And, the berries that were supposed to be red/pink, came out blue. But, I like it. This one is 9" across...


I decorated this plate with a free-form daisy and vine that I painted on. The background was yellow but turned gray during firing. This one is also 9" across...


I went beyond a circle to create my third slab plate. It's a tropical leaf that is 6" wide and 18" long. I made the small end thick and strong but it somehow ended up breaking during the first firing. I never glazed it and fired it again because I didn't really want a platter that was glued together. It sure would have been a great piece though.


The next project was also constructed with slabs of rolled clay. We were to build a birdhouse inspired by some kind of architecture. I originally thought of doing a Southwest style house but in the end created one with more of a cottage feel. I hand carved all the little tiles/shingles on the roof and the wood grain in the shutters, hand sculpted every little leaf, and the vines were extruded through a little die/press. I loved how it looked when I was finished constructing it. As I glazed it, I had a vision of yellowy walls, a brown roof and shutters, and green vines. The glazes had a different idea...yellow, rust and brown. Oh well. I like it anyway. It's 5" wide by 7 1/2" tall.


Our next project was to be constructed with a coil of clay, twirled around and stacked on itself and then smoothed. It was supposed to be inspired by Native American pottery. Somehow, mine took on a shape totally different than I had envisioned. I'm not really sure how that happened but I really like it. I'm happy with how smooth I was able to make it. People kept asking if I had thrown it on the wheel because it was so smooth. That's cool! The next step was to let it dry a bit and then burnish the surface by rubbing a smooth stone on every inch of the outside surface...for a long time. That pushed all the bigger grains of clay down and left it very smooth like polished stone. It was then fired for about an hour until it was super hot and glowing orange. At that time, I removed it with gloves and long tongs and carefully placed horse hairs on it. The hair would sizzle, curl and twist as it burned and left really cool designs on my vase. After it was cooled and cleaned, wax was applied to the surface and polished. I love this one! I've seen pots like this in Native American shops but never realized what those lines were. Now I know, and I love and appreciate them much more. This is 6" wide x 8" tall.


For some reason, I always thought I'd get the whole throwing pottery on a wheel thing down pretty easy. It didn't look hard. Well, I learned a lesson on that! I didn't do too bad for my first semester but there's a lot to it and I have a lot of practicing and learning to do. Here's my first bowl. It doesn't show in this picture but it has a big hole in the bottom. I'm not sure what I'll do with a holey bowl but, I'm proud of it none the less. It's 5" across by 2 3/4" tall.


I kept at the wheel, practicing and practicing. I wasted some clay in the process. And, I made bowls of many sizes and shapes. One of our projects was to create a "set" of bowls. These don't really match in shape or size and they don't even fit together to be nesting bowls. But...they are all bowls and I made them! They range in size from 4 3/4" across x 2 1/4" tall to 6" x 3 3/4".


Considering how challenging it is to not only create a nice bowl on the wheel but to try and repeat a shape, I'm pretty happy with them. I'm especially happy with the shape of the big white one. I glazed them in colors that I thought might look good together. Most of the colors turned out how I planned. This is my set and I'm sticking to it!


This project started out to be a bowl but when it threatened to colapse on the wheel, I did my best to save it and turned it into a squat little vase. I think it will look beautiful with big rose blossoms piled into it. It's one of my favorite projects. I love how it looks in it's blue/green celadon glaze. It's 5"3/4" wide by 3" tall.


The body of this pumpkin was created by a talented student who loves to make pumpkins. She made a hollow ball on the wheel (amazing!) and showed me how to create the pumpkin shape by gently karate chopping the little grooves. I later added a stem and leaf. The glaze colors turned out great on this. I love it! Thanks, Tanya! :-)


One of our assignments was to create a set of four mugs or cups with handles. I tried to do it with slab construction but frustration with that sent me to the wheel. That went a lot better and gave me more practice at throwing. They're not exactly the same but they're close. I decorated each one with handmade oak leaves and acorns...some of my favorite things!


The colors were supposed to be yellow with little rusty speckles on the body of the mugs and handles and the leaves were to be a rusty color. They came out close. I'm pretty happy with them. I ended up with five mugs that are all about 3 1/2" wide (5" with the handles) x 3 1/2" tall.


I really wanted to make a pitcher on the wheel and thanks to the help of a patient and talented student, I did it! Yay! Thanks, Frank! I applied the handle later and glazed the whole thing in "Stoneware Blue". I glazed it a little thick though and another firing will be needed to allow little gas bubble spots to finish glazing over. It's 6" (8" with the handle) wide by 6 3/4" tall.


I was a little frustrated sometimes through this semester but more and more I gave into just enjoying the process and being excited to see how things were going to turn out. It was a great opportunity to practice letting go, letting be, and having fun. I think it went pretty well because I'm planning to take another semester of this fun next Fall. And, I now have a much greater appreciation for this art form. The best part is that I took the class with my daughter. We got to spend a lot of time together being creative, supportive and having fun. How great is that?!!! :-D