Unity - Peony Ledger Birthday

 Happy Saturday!

Today I have a birthday card using a stamp set from Unity called Peony Ledger.  The image is colored with Copic Markers.  The papers are from The Paper Studio - The Basics.  I chose 3 papers from the pad and made a patchwork.  

I have not done sewing on my cards in quite awhile. My sewing machine wasn't working quite right and I hadn't taken the time to troubleshoot the problem, but with some help from YouTube I got it threaded and tensioned correctly.

Added the sewed patchwork to a white base card and the stitched banner with the Happy Birthday sentiment.

Copic Colors: RV10, RV11, RV13, RV14; 

YG91, YG93, YG95, YG97; YR12, YR14; B000

Thanks for stopping by...

Blessings,

Deb

Unity - Peony Mother's Day

Happy Saturday!

With Mother's Day tomorrow, I have this years Mother's Day card to share today.  I used a Stamp and layered Stencil from Unity called Peony.  

I saw this card layout on Facebook with large flowers in the lower left and upper right corners with an embossed background.  It was the inspiration I needed to use some pieces I had sitting on my desk.   

I had the Spellbinders Tufted 3D embossed panel in my stash.  I created it when I got the folder so I could see when it was like.  

I actually bought the stencil first, there were several sample cards with a white outline so I thought they only used the stencil.  I just could not get it to look right, although I think I used watercolor paints, that could have been my problem.  So, I bought the coordinating stamp set and die when they were on sale.  When I got the Peony stamp and die, I tried it out, stamping the flower cluster on some white cardstock and colored it using the multi-layer stencil.  

The stencil is on 1 large mylar sheet but has 3 steps for the flower and 2 steps for the leaves.  I used PTI Sweet Blush (upper left), Pale Peony (upper middle) and Hibiscus Burst (upper right) ink and blending brush for the flower petals.  The leaves were colored with PTI Green Parakeet and New Leaf ink. The center of the flower was colored with markers. Then, I die cut the colored image.  And there the colored peony images sat for several months on my desk.

One colored image was used for the card, which was the clever part of the layout.  I mounted the larger bloom in the lower left hand corner of the embossed panel (3.75 x 5") with pop dots, the bud is in the corner, then trimmed it.  The medium bloom was mostly cut off and this remanent was used in the upper right corner and trimmed.

I matted the image panel on 4" x 5.25" PTI New Leaf cardstock.  The base card (4.25 x 5.5" folded) is PTI white cardstock.  The sentiment is a Spellbinders stamp set "Sentiments to you". The Happy Mother's Day was stamped on white cardstock and cut with a Spellbinders circle die and matted with a PTI New Leaf circle and added to the front of the card. 

A bright and cheery Mother's Day card.  

It would make a great birthday card too.

Thanks for stopping by...

Blessings,

Deb

 

Unity - Otterly Devoted Anniversary

Happy Saturday!

Today I have the card I made for Mark for our anniversary.  The stamp set is from Unity, "Otterly Devoted".  I stamped the image on PTI Vintage Cream cardstock.  The notebook edge was created by a die from My Favorite Things. 

The image was colored with Copic Markers.

Copic Colors: E30, E34, E35, R02, R05, R08, BG11, BG43

I inked the edges using PTI Kraft ink and blending brush and matted the image with PTI True Black cardstock.  A strip of vintage old newspaper paper finished the card.

Thanks for stopping by...

Blessings,

Deb

Unity - Reel Great Guy

Happy Saturday!

Today, I have a birthday card to share.  The image is Unity - "Reel Great Guy", which is a great set for masculine cards.  I used Unity Postage Nested die to cut the cream linen texture cardstock, then stamped the image of the fishing lures.  The lures were colored with Copic markers.

Copic Colors: E30, E34, E35, R05, R08, BG45, 

BG49, Y32, Y35, YG13, YG17

I aged the edges of the colored image with PTI Kraft ink and a blending brush and matted it with PTI True Black cardstock.  The base card is PTI Vintage Cream.  I used some scraps of barnwood papers and vintage newspaper papers to cover the base card, then added the image and some twine.

Thanks for stopping by...

Blessings,

Deb

Unity - Level Up Birthday

Happy Saturday!

Today I have a birthday card I made for our nephew who turned 40 this week.  I thought this stamp set from Unity - Level Up was perfect.  I remember getting him Gameboy games for his birthday 25-30 years ago, so this image had all the nostalgia along with a fun gaming sentiment. 

I stamped the Loading image on white cardstock then used DieNamics - Stitched Basics Edges die to create the angle cut.  Used a stitch banner die for the sentiment.  I added a stenciled chevron in Soft Stone ink to the white cardstock.  The Gameboy image was colored with Copic Markers and fussy cut out and adhered to the front panel with pop dots.  The base card is white.  I added a piece of blue Bazzill cardstock, then added the white front panel with the image and sentiment.

The second card uses the same layout and the gaming controller from the same stamp set. I fussy cut the controller out, so the plug was free and wrapped around the sentiment.  A fun detail I saw on a Unity card sample for this set.

Copic Colors:  B14, B16, Y32, Y35, R14, R46, W1, W2, W3, 0

Cardstock: Bazzill Loganberry Pie, PTI White

Ink: PTI Soft Stone

Thanks for stopping by...

Blessings,

Deb

Unity - Bot you a Present - Birthday

 Happy Saturday!

Today I have a couple more cards I made with Unity - Bot you a Present.  Similar layout to the Valentine's day card from last month, I changed the die cut to a scallop and base card to PTI Aqua Mist.  The patterned papers are Unity - Love Notes.  I added a sentiment from the stamp set to make it a birthday card.

A third card using patterned paper scraps.

The image is colored with Copic Markers.

Copic Colors: BG11, W0, W1, W2, W3, W7, 

R00, R32, R35, R37, YG05, YG06

Thanks for stopping by...

Blessings,

Deb

Electrical Birthday

 Happy Saturday!

Today I have a birthday card I made for my friend's husband who is an Electrical Engineer.  I could not resist when I saw this circuit board 3D embossing folder by Tim Holtz.  I had to get it.  I embossed a piece of PaperTrey Ink Blueberry Sky cardstock then used a dark gray Copic marker (W7) to color the surface mounted elements.  With a Artistro gold paint pen I colored the electrical traces and vias. 

I matted the circuit board with gold cardstock and added a die cut happy birthday sentiment from Memory Box. 

A pretty quick birthday card.

Thanks for stopping by...

Blessings,

Deb

Spellbinders - Scenic Drive Birthday

Happy Saturday,

Today I have a stenciled card to share.  It uses a 6 layer stencil from Spellbinders called Scenic Drive, which creates the sky, clouds, sun, trees and ground.  

I used PTI Aqua Mist and Hawaiian Shores inks for the sky, Terracotta Tile, Melon Berry and Bright Buttercup for the sun, Ripe Avocado and New Leaf for the trees and Fine Linen, Kraft and Dark Chocolate for the ground.  The inks were applied using the multi-step stencil and blending brushes to create this great retro-graphic scene.  For the puffy clouds are used Light Fluffy Paste for some texture.

I cut the stenciled image and Black mat out using DieNamics Circle STAX Set 1.  I made this card a square card 5.25" square.  I continued part of the sky pattern and ground from the image with Aqua Mist and Kraft cardstock.

The script Happy die cut is from Memory Box and the birthday stamp is from Simon Says Stamp "Happy".  I used a lot of random dies from my stash.  I attended an online cardmaking summit focused on using what you have and it seems to have reminded me I have lots of great things I just need to use them.

Thanks for stopping by...

Blessings,

Deb

Unity - Robot Valentine's Day

Happy Valentine's Day!

Today I have the card I made for Mark.  It uses a stamps and papers from Unity, called "Bot you a present" and "Love Notes".

I stamped the robot image on white cardstock with Memento ink and colored it with Copic markers.  Then cut it out the shape using Unity Postage nesting dies.

The base card is PTI Pure Poppy.  

Copic Colors: BG11, YG05, YG06, R00, R02, R32, R35, R37, R39

W2, W3, W4, W7, 0

Thanks for stopping by...

Blessings,

Deb

Unity - Someone Left the Gate Open

 

Happy Saturday!

Today, I have a birthday card I made for my sister-in-law, who I found out over Christmas loves cows.  I saw this image from Unity - Someone Left the Gate Open and had to get it.  I think is a really fun image and was on sale.

I stamped the cow image on the PTI Vintage Cream base card and also on white cardstock.  The image stamped on white cardstock was colored with Copic markers.  I extended the neck of the cow image slightly, maybe 1/4".  

  I fussy cut the colored image cutting off the whiskers and adhered it to the base card which was stamped also to show the whiskers.  Then, added some weathered barnwood patterned paper to create a wall for the cow to look over, with sentiment sign and black cardstock trim.  

I saw a card sample on Unity's website with the cow image looking out the barn door which was the inspiration for this card.

Copic colors:

0, E50, E51, W0, W1, W2, W3, N7, YR01

This card just makes me smile.

Thanks for stopping by...

Blessings,

Deb

Unity - Nature's Escape Birthday

 

Happy Saturday!

Today, I have a birthday card using Unity "Nature's Escape" which was a stamp of the month in June 2024.  Took my quite awhile to use it, I had a subscription in 2024 and I still have a few from that year to ink up.  I stamped the image on white cardstock with Memento Ink.  The image seemed daunting to color at first.  I used Copic markers.  I was pleasantly surprised how this card turned out.

I used some PTI Kraft ink and a blending brush to age the edges of the colored image and sentiment.  To add some texture, I used a woodgrain embossing folder and Chocolate cardstock for the panel to mount the image and sentiment.

I was looking through my stash of brads, looking for something like a screw head brad and found this brad with a loop.  I forgot about these, added some twine to the loop on the brad and knotted the ends.  The perfect embellishment.

Copic Colors: YR23, YR68, R46, R59, B12, B16, B21, 

YG13, YG17, YG67, E31, E33, E35, E37 and 0 for blending. 

Cardstock: PaperTrey Ink White, Kraft, Chocolate

Embossing folder: Big Shot Pinewood Plank

Embellishment: Brad with loop and twine

Thanks for stopping by...

Blessings,

Deb

BetterPress - To my Favorite Person

Happy Saturday!

It's my first post of 2026!  I have the birthday card I made for our niece to share today.  She turned 29 a couple weeks ago.  I'm not sure where the time has gone.  Seems like yesterday we picked her up at daycare, which is a sweet memory. She was playing in the sandbox and looked up to see us, then ran to us with the biggest smile.

I used the BetterPress plate that came with the Spellbinders BetterPress system.  It did not have a name on it, but the sentiment is 'to my favorite person".  

I used a Unity scalloped nested die to cut some PaperTrey Ink white cardstock and taped it to the clear plate.  Then positioned the BetterPress image plate on the magnetic mat, applied Memento ink and ran the BetterPress through my Spellbinders Platinum Machine.  The sentiment is from PaperTrey Ink retired Fillable Frames #4.  I colored the flowers and leaves with Prismacolor colored pencils. 

I experimented with the special inks and paper the system came with; they are nice.  However, I think the even pressure you get putting the BetterPress through the Spellbinders machine is really the key to the crisp image and the beauty of this system. 

A pretty card, with some patterned paper, an ribbed embossed panel and white organza ribbon from my stash.  I'm trying really hard to use all the pretty things I've accumulated over my many years of cardmaking.

Thanks for stopping by...

Blessings,

Deb

Christmas Joy Wreath

Merry Christmas!

Today I'm sharing the last Christmas card I made this year.  It uses several dies, the Nativity Joy is from InLoveArtShop and wreath from Amazon plus a woodgrain embossing folder from Stampin' UP!

I cut 2 wreaths out of 2 shades of cardstock, PTI Ripe Avocado and Olive Twist and layered them.  The bow and Joy Nativity are cut from PTI Pure Poppy.  

The White panel was run though the BigShot using Pinewood Planks Dynamic Textured Impressions Embossing Folder.  The embossed panel is layered on a PTI Olive Twist base card.  Then I added the layered wreath.  The Red Joy was added with pop dots.  Lastly, I added a few red gems to the wreath to finish.

Thanks for stopping by...

Hope you have a blessed Christmas!

Deb

Peace on Earth

Happy Saturday!

Today is day 5 of my 2025 Christmas card creations.  This is another simple white, blue and gold card.  

I found this star die cut set on Amazon.  There were several dies in the set to create a layered star.  I cut 2 in gold and 2 in white and glued them together. 

The Peace on Earth sentiment is an old stamp from The Angel Company, which I stamped in PTI Enchanted Evening ink on PTI White cardstock.

I created an Enchanted Evening panel and matted in Gold.  Then I added the sentiment and adhered the star with pop dots.

Thanks for stopping by,

I have a nostalgic card tomorrow...

Blessing to you,

Deb

 

Spellbinders Sprigs and Bow

 

Happy Sunday!

Today is day 4 of my 2025 Christmas card creations.  This card uses 

Spellbinders "Sprigs and Bows" stencil set, sadly it is no longer available.  There are 5 stencils and 1 mask in this set.  

I started with a 4.25 x 5.5" piece of PTI White cardstock.  First, I used the bow stencil with PTI Pure Poppy ink and applied the ink to the cardstock with a large blending brush.  Second step is to place the mask for the bow and ribbon over the inked area - very important to protect the bow just created. Third step is to use the leaf stencil and light green ink, I used PTI Prairie Grass to create the leaves.  Fourth step is to line up the stem stencil and use PTI Ripe Avocado ink to create the darker grean stems.  The Fifth step is to line up the stencil to add the red berries with PTI Pure Poppy ink.  Lastly, I removed the mask for the bow and above is the result.  I've never used a mask made from the same material as the stencil.  It worked really well, it allowed inking right up to the bow and ribbons. 

This card was labor intensive with all the stencils and the mask, but I was really happy with the result.  I cut the stenciled cardstock down to 4 x 5.2" and mounted it on a PTI Pure Poppy base card.  Then to finish the card I added a few red gems.

This card of the gift was the theme I went with this year for the inside verse for all my 2025 Christmas cards...

Wishing you joy and peace
as we celebrate the
beautiful gift of Jesus. 
A gift freely given to all people
to demonstrate God’s love,
grace and promise of eternal life,
through faith alone.

 Joyous Christmas Blessings

Thanks for stopping by...

3 more posts to go!

Blessings to you,

Deb

     

Christmas Joy with Sprigs

 Happy Saturday!

Today is Day 3 of my 2025 Christmas card creations.  Last Saturday I had a card that used the In Love Arts Joy Nativity die and todays card uses it too.  The multilayered stenciled springs of holly background is what I'm going to talk about today.  This stencil set was a Spellbinders Stencil of the Month "Sprigs and Bow" in July 2024.  

Spellbinders usually makes their monthly subscription items available to everyone after a few months.  This set, unfortunately was on clearance in June when I bought it, so it isn't available anymore.  It came with 5 layering stencils and 1 mask for the bow.  I used the 3 stencils to create the sprigs and holly for this card.  

I started with a 4.25 x 5.5" white cardstock panel.  The 1st stencil makes the lighter green leaves, the ink I used was PTI Prairie Grass.  The 2nd stencil adds the stems, I used a darker green, PTI Ripe Avocado.  The 3rd stencil adds the holly berries, I used PTI Pure Poppy.   The ink was applied with a large blending brush.  I only used 2 blending brushes, one for the greens and another for the red ink.

The base cardstock is PTI Ripe Avocado.  I cut the stenciled panel down to 4" wide and adhered it to the base card on the right side.  I added the Joy Nativity panel just like last weeks card, with pop dots.  Then added a few red gems to finish the card.  

Thanks for stopping by...

Tomorrow, I show a card made with the springs and bow.

Blessings,

Deb

InLoveArts Joy Nativity

Happy Saturday!

Today is the start of my Christmas card posts for this year!  I have 9 different designs, which I will share over 7 posts.  These are the first 2 cards I made, simple 2 colors with a die cut and some texture from the embossed panel.  

The Joy Nativity is a die from InLoveArts, which I cut from PTI White cardstock.  I embossed a white panel using Spellbinders 3D Embossing Folder "Holly & Foliage".  I stamped a sentiment on the PTI Pure Poppy cardstock and added the die cut Joy with clear drying glue.  The base card is PTI Pure Poppy and I added the 4x5.5" embossed panel on the right side of the base card. 

My second card is a variation in PTI Enchanted Evening. 

For this version I cut down the embossed panel 4x5.25" to mount to the PTI Enchanted Evening base card.  Then added the blue panel with sentiment and die cut joy like the red version.

Thanks for stopping by...

Tomorrow I will have another Christmas card to share.

Blessings,

Deb

Spellbinders - Cosmos Birthday

Happy Saturday!

Today, I have some birthday cards I made using Spellbinders Cosmos Backdrop and stencil bundle.  I found it on Amazon.  This background is so pretty and with the 4 layer coordinating stencils is so easy to color.  I made several color combinations and also played with the layout and the sentiment. The sentiment is from PTI stamp set Cut Away Tags - Summer.

The background is a BetterPress plate, which I inked with Memento Black ink and ran through my Spellbinder die cut machine to make the impression on PTI White cardstock.  I love the BetterPress plates for large backgrounds, gives a beautiful impression like it is printed.  Then, I colored the image using coordinating stencils.  

The inks used are all PaperTrey Ink - Flowers: Pale Peony and Berry Sorbet; Flower Center: Summer Sunset and Honey Nut; Leaves: Green Parakeet and Simply Chartreuse. 

The first card above is a pink-peach version.  The base card is Pale Peony with a True Black matted image in the upper right corner and matted sentiment in the center.

Card 2 - Teals

The inks used are all PaperTrey Ink - Flowers: Aqua Mist and Hawaiian Shores; Flower Center: Summer Sunset and Honey Nut; Leaves: Green Parakeet and Simply Chartreuse. 

The second card above is a teal version.  The base card is Aqua Mist with a True Black matted image centered and matted sentiment across center of the background.

Card 3: Purples

The inks used are all PaperTrey Ink - Flowers: Lilac Grace and Amethyst Allure; Flower Center: Summer Sunset and Honey Nut; Leaves: Green Parakeet and Simply Chartreuse. 

The third card above is a purple version.  The base card is Lilac Grace with a True Black matted image centered and matted sentiment at an angle across the background.

Card 4: Bright Pinks

The inks used are all PaperTrey Ink - Flowers: Lovely Lady and Raspberry Fizz; Flower Center: Summer Sunset and Honey Nut; Leaves: Green Parakeet and Simply Chartreuse. 

The fourth card above is a bright pink version.  The base card is Raspberry Fizz with a True Black matted image centered and matted sentiment flag added to the background.

Thanks for stopping by...

Blessings to you,

Deb

Fun Stampers Journey - Lakeside Birthday 2

 Happy Saturday!

Today, I second card to share using several retired stamps from Fun Stampers Journey "Lakeside".  The image is colored with Copic markers.   

I also used a couple background stamps.  FSJ "Script" background, I stamped on the PTI Spring Rain cardstock with Spring Rain ink.  On the PTI Chocolate cardstock I stamped the fishnet background from FSJ "Background Basics 2".

The Happy birthday is from PTI Birthday III Stamp set.  I had some cord twine laying on my desk, which I knotted and added to the front to finish the card. 

Copic Colors:  YG91, YG93, YG95, E31, E33, E35, B0000, B14, B24, C1, C2

 Thanks for stopping by...

Blessings to you,

Deb

Simon Says Stamp - Heart Breeze Engagement

Happy Saturday!

Today, I have an engagement card using Simon Says Stamp "Heart Breeze" die.  The card is for my cousin's son, so needed a more rustic look.  I used some barnwood patterned paper from Craft Consortium, cut to 3.25 x 4.5".  

I stamped a sentiment from Simon Says Stamp! called "Sentiments for you" that I found in my stash.  Then die cut the heart breeze.  I backed the woodgrain panel with PTI Pure Poppy, then matted with PTI Pure Black.  The base card is PTI white cardstock 4.25 x 5.5", A2 size.

Thanks for stopping by...

Blessings to you,

Deb