Lili Of The Valley - Love Gnomes #2

 Evening Everyone

I'm back again to share the last of my cards using the Lili Of The Valley new releases. Once again I used one of the cute 'Love Gnomes'; I love this set as they're so easy to colour up and cut out. For today's card I decide to use lilac as my main colour, as I think it really suits him. :) I used Copic pens to colour with. I hope you like it. 

 

For your information, here is the link to the LOTV Etsy Store to check out all the stamps, and the LOTV online store to check out the rest of their goodies.

Here's What I Did & Used

First, I covered the front of a 6" x 6" card front with some pretty ombre paper, leaving  slim border around the edge. Next, I die cut a scalloped square frame from white card 4 x times then glued and stacked them up. The frame was glued into the centre of the card front. 

I created a ' Happy Anniversary' sentiment and printed it onto white card using my laser printer, then added purple foil over the top using my Minc foiling machine. The sentiment topper was then die cut into a inverted square using the same scalloped frame die as before. Lilac ink was applied to the bottom left hand corner; when the ink was dry the topper was glued inside the frame. 

The adorable love gnome was stamped onto colouring card, coloured with Copic pens, and then fussy cut out. White dots were added to the heart the gnome is holding, then glued inside the frame. To finish the card off, I added a purple glitter die cut hearts, a few pearls and a little glitter to the bow.

Polymer Stamp Set:  

Polymer Stamp Set - Love Gnomes

Copic Pens: Skin - E000, E00, E11 / Beard - W1, W3, W5 / Hat & Heart - V01, V06, V09, V12, R14, R27 / Outfit - V01, V06, V09, V12 / Heart & Bow - Y11, Y31, V01, V06, V12 / Boots - B00, B02, B95

Other: 6” x 6” White Card Blank, Make It Colour Card, White Card, Lilac Glitter Card, 'Ombre Designs - Pastel' Paper Pad (The Works), Heart Die Set (The Works), Stitched Scalloped Square Frames Die Set (MFT), Wilted Violet Distress Ink, Purple Foil (Deco Foil), Laser Printer/Minc Machine, White Pen, Glitter, Pearls, Funky Foam, Double Sided Tape, Black Ink, Glue

If you wish to ask a question about any of my cards please leave me a message in the comment with your email address, otherwise I cannot contact you. Alternatively email me at jsnine.quinn@gmail.com

Or why not join us on social media at  'We Love Lili Of the Valley' Facebook Group run by the Design Team, the official Lili Of The Valley Facebook page and on Instagram.  We'd loved to see you.

Please Note - I am part of the Lili Of The Valley's Design Team and I receive their lovely digi images to play with and share with you; I do not receive any monetary reimbursement for my samples, advertisements or my participation. I do, what I do for fun and relaxation. Thank you. x

Thank you so much for dropping by, and please don't forget to say hi :)  I'll be back soon with more sneaky peeks of the fabulous new LOTV Love stamps. TTFN

Hugs

x Janine x

Lili Of The Valley - Love Gnomes #1

Afternoon Everyone

Today I'm sharing a card using another of the Lili Of The Valley new release polymer stamps, this time from the fabulous 'Love Gnomes' set. These little guy's are sooo cute, and so easy to colour up. For my little pink love bug today I used Copic pens which I then fussy cut out. I hope you like it. 

 

For your information, here is the link to the LOTV Etsy Store to check out all the stamps, and the LOTV online store to check out the rest of their goodies.

Here's What I Did & Used

First, I die cut a scalloped square frame from pearly pink then glued a white square mat of card on top. The topper was added flat to the centre of the card front.  

Next, I die cut lots of different strips of pink, white and glitter card in varying widths, then adhered them to a piece of thin card in a pattern. The finished striped card was die cut into a scalloped heart and added to the front of the frame. 

The cute love gnome was stamped onto colouring card, coloured with Copic pens, and then fussy cut out. White dots were added to the heart the gnome is holding. Foam was added to the back of the gnome to give him dimension, and glued to the front of the heart. A die cut sentiment was added to the bottom right of the card front. To finish the card, I added a few pearls around the gnome. 

Polymer Stamp Set:  

Polymer Stamp Set - Love Gnomes

Copic Pens: Skin - E00, E02, E11 / Beard - W0, W2, W3, W5 / Hat & Outfit - RV13, RV21, RV14 / Heart - RV00, RV02, RV06, RV34 / Boots- C1, C2, C5

Other: 6” x 6” White Card Blank, Make It Colour Card, White, Pale Pink, Deep Pink Card, Pink Glitter Card, Pink Centura Pearl Card, Quick Stripes Die Set (Mama Elephant), Stitched Scalloped Square Die Set (Creative Expressions), 'Mwah' Sentiment Die (Stamping Bella), Scalloped Heart Die (Die'sire - Crafters Companion), White Pen, Pearls, Funky Foam, Double Sided Tape, Black Ink, Glue

If you wish to ask a question about any of my cards please leave me a message in the comment with your email address, otherwise I cannot contact you. Alternatively email me at jsnine.quinn@gmail.com

Or why not join us on social media at  'We Love Lili Of the Valley' Facebook Group run by the Design Team, the official Lili Of The Valley Facebook page and on Instagram.  We'd loved to see you.

Please Note - I am part of the Lili Of The Valley's Design Team and I receive their lovely digi images to play with and share with you; I do not receive any monetary reimbursement for my samples, advertisements or my participation. I do, what I do for fun and relaxation. Thank you. x

Thank you so much for dropping by, and please don't forget to say hi :)  I'll be back soon with more sneaky peeks of the fabulous new LOTV Love stamps. TTFN

Hugs

x Janine x

Lili Of The Valley - Bear Hug Tags

Afternoon everyone

I'm back again to share more Lili Of The Valley loveliness with you. As I've mentioned in my previous posts I'm highlighting the new polymer stamp which were released on New Year's Day. The launch includes 'Sweet Bears', 'Bear Hug Tags', 'Cupid Tags', 'Love Sentiment Tags', 'Heart Mini Image Icon Tags', 'Mason Jars', 'Love Definitions' and 'Love Gnomes'. Definitely check out all the different sets! 

For today's card I used 'Bear Hug Tags' and combined 3 of the tags and sentiments to make a simple DL card. I used colouring pencils on Kraft card for a different look. I hope you like! I'll be back in the next day or so with more sweet images. 

For your information, here is the link to the LOTV Etsy Store to check out all the stamps, and the LOTV online store to check out the rest of their goodies.

Here's What I Did & Used

I covered the front of a DL white card blank with a piece of trimmed down brown textured card. The gorgeous little bear tags and sentiments were stamped out onto Kraft card and coloured with Prismacolor pencils. The tags were fussy cut out and foam pads were added to the back and then attached to the card front. 

To finish the card, hearts die cut from red glitter card were added to the gaps between the tags and at the top of the tags. 

Polymer Stamp Set:  

Polymer Stamp Set - Bear Hug Tags

Prismacolour Pencils: Bears - Cream, Burnt Ochre, Terracotta, Tuscan Red, Dark Brown, Blush Pink, Pink, Black / Hearts & Balloon - Pink, Carmine Red, Crimson Red, Crimson Lake / Envelop - Cream, Yellow Ochre, Sunburst Yellow

Other: DL White Card Blank, Kraft Card, Brown Card, Red Glitter Card, Heart Die Set (The Works), E33 Copic, White Pen, Double Sided Tape, Black Ink, Glue, Foam Pads

If you wish to ask a question about any of my cards please leave me a message in the comment with your email address, otherwise I cannot contact you. Alternatively email me at jsnine.quinn@gmail.com

Or why not join us on social media at  'We Love Lili Of the Valley' Facebook Group run by the Design Team, the official Lili Of The Valley Facebook page and on Instagram.  We'd loved to see you.

Please Note - I am part of the Lili Of The Valley's Design Team and I receive their lovely digi images to play with and share with you; I do not receive any monetary reimbursement for my samples, advertisements or my participation. I do, what I do for fun and relaxation. Thank you. x

Thank you so much for dropping by, and please don't forget to say hi :)  I'll be back soon with more sneaky peeks of the fabulous new LOTV Love stamps. TTFN

Hugs

x Janine x

Lili Of The Valley - Sweet Bears #2

Hi everyone

I hope you've all recovered from the New Year's day festivities. To continue on from yesterday I'm sharing another of my Lili Of The Valley cards highlighting the new polymer stamp release. The new sets include 'Sweet Bears', 'Bear Hug Tags', 'Cupid Tags', 'Love Sentiment Tags', 'Heart Mini Image Icon Tags', 'Mason Jars', 'Love Definitions' and 'Love Gnomes'. You're going to love them all, they're are really cute and so useful. They could be used for birthday, anniversary, Valentines or simply to say 'I love you'. For my card today I used another of the 'Sweet Bear' stamps and made it really pretty. I hope you like it. 

 

For your information, here is the link to the LOTV Etsy Store to check out all the stamps, and the LOTV online store to check out the rest of their goodies.

Here's What I Did & Used

I covered the front of a 6" x 6"white card blank with a piece of trimmed down pink patterned paper.  The cute bear and her flowers were stamped out onto watercolouring card to create a little scene, a curved line was drawn across the bottom section to create a hillside. The bear and flowers were then stamped again onto masking paper, fussy cut out and placed over their corresponding image. Using a cloud stencil, blue ink was apply to create a background sky. When the sky was dry, a thin layer of green paint was added to the bottom section of the scene to create the grass. The masks were then removed. The finished scene was die cut into a square. 

The images were coloured with distress ink making sure they were kept them light and pretty. The grass was created by adding lots of flicks of green ink in varying colour and thickness to it. The completed scene was attached to a white scalloped square frame, and funky foam was added to the back. The completed topper was mounted onto the card front. A sentiment from the set was stamped onto a die cut heart and a little watercolour ink was added around the edge. To finish the card, the heart was added to the card front with foam pads, and a glitter to the pink hearts.

Polymer Stamp Set:  

Polymer Stamp Set - Sweet Bear

Distress Ink & Reinkers: Bear - Vintage Photo, Brushed corduroy, Spun Sugar / Scarf & Dress - Peacock Feathers / Coat & Bow - Spun Sugar, Salt Water Taffy, Victoria Velvet / Heart & Flowers - Spun Sugar, Salt Water Taffy, Victoria Velvet, Twisted Citron, Mowed Lawn / Grass -Twisted Citron, Mowed Lawn, Rustic Wilderness

Other: 6" x 6” White Card Blank, Royal Langton Watercolour HP Card, White Card, 'Secret Garden' Paper Pad (The Works), Scalloped Heart Die Set (Die'sire Crafters Companion), Stitched Scalloped Square Die Set (Creative Expressions), Tumbled Glass Distress Ink, Cloud Stencil (MFT), White Pen, Double Sided Tape, Black Ink, Glue, Funky foam, Foam Pads

If you wish to ask a question about any of my cards please leave me a message in the comment with your email address, otherwise I cannot contact you. Alternatively email me at jsnine.quinn@gmail.com

Or why not join us on social media at  'We Love Lili Of the Valley' Facebook Group run by the Design Team, the official Lili Of The Valley Facebook page and on Instagram.  We'd loved to see you.

Please Note - I am part of the Lili Of The Valley's Design Team and I receive their lovely digi images to play with and share with you; I do not receive any monetary reimbursement for my samples, advertisements or my participation. I do, what I do for fun and relaxation. Thank you. x

Thank you so much for dropping by, and please don't forget to say hi :)  I'll be back soon with more sneaky peeks of the fabulous new LOTV Love stamps. TTFN

Hugs

x Janine x

Lili Of The Valley - Sweet Bears

 Happy New Year Everyone

I hope you all had a fabulous Christmas and New Year. Mine was a quiet one with my hubbie, but it was very relaxing with a little crafting in the mix. Here's to a healthy, happy and fulfilling 2023. I have plans this year to be more creative and do thing for 'me', I'm planning to get back into drawing, painting and sewing which I really miss, as well my usual crafting. I hope you have some plans to spend more 'me' time too. 

Anyhow, onto today's post. Today I'm sharing the first of my Lili Of The Valley cards using one of the new polymer stamps which launch in their etsy store today (1/1/23). The new collections include The new sets include 'Sweet Bears', 'Bear Hug Tags', 'Cupid Tags', 'Love Sentiment Tags', 'Heart Mini Image Icon Tags', 'Mason Jars', 'Love Definitions' and 'Love Gnomes'. You're going to love them, they're are really cute. They could be used for birthday, anniversary, Valentines or simply to say 'I love you'. For my card today I used one of the 'Sweet Bear' and the balloons stamps in the set and teamed it with an old sentiment stamp. I thought he looked like he could be floating so I made a cloud scene. I hope you like it. 

 

For your information, here is the link to the LOTV Etsy Store to check out all the stamps, and the LOTV online store to check out the rest of their goodies.

Here's What I Did & Used

I covered the front of a 5" x 7" top fold card with a piece of thin blue card. The sweet little bear and the balloons were stamped out, coloured with Copic pens, and then fussy cut out. 

To create the background - a piece of blue patterned paper was inked up with 2 blue distress inks to create a cloudy sky, then die cut into a rectangle. A sentiment was printed onto a piece of white card and die cut into a rectangle (same die as before). The sentiment end was die cut again using a cloud border die. The opposite end of the rectangle was also cut with the cloud border die but this time slightly larger. Both clouds were layered up at the bottom of the blue sky paper along with 2 smaller clouds cut from white card - the over hangs were then trimmed off.  

The completed scene was attached to a white scalloped rectangle frame and mounted flat onto the card front. The balloons and cut out bear were attached with Bakers Twine and glued to the card front floating in the clouds. To finish the card, I added a glitter to the white hearts and a few gems etc near the sentiment. 

Polymer Stamp Set:  

Polymer Stamp Set - Sweet Bear

Digital Sentiment - Spring Mix 32 Sentiments 

Copic Pens: Bear - E31, E33, E34, E35, R22 / Scarf - R14, R17, R27 / Coat - B06, B12, B14, B18 / Envelop - R17, R20, R22 / Hearts - R14, R17

Other: 5” x 7” White Card Blank, Make It Colour Card, White & Blue Card, 'Bloom & Wild' Paper Pad (Craft Consortium), Puffy Cloud Border Die Set (Lawn Fawn), Stitched Scalloped Layered Rectangle Die Set (Creative Expressions), Cloud Die (Joy! Crafts), Tumbled Glass & Peacock Feathers Distress Ink, Bakers Twine, White Pen, Pearls, Gems, Double Sided Tape, Black Ink, Glue

If you wish to ask a question about any of my cards please leave me a message in the comment with your email address, otherwise I cannot contact you. Alternatively email me at jsnine.quinn@gmail.com

Or why not join us on social media at  'We Love Lili Of the Valley' Facebook Group run by the Design Team, the official Lili Of The Valley Facebook page and on Instagram.  We'd loved to see you.

Please Note - I am part of the Lili Of The Valley's Design Team and I receive their lovely digi images to play with and share with you; I do not receive any monetary reimbursement for my samples, advertisements or my participation. I do, what I do for fun and relaxation. Thank you. x

Thank you so much for dropping by, and please don't forget to say hi :)  I'll be back soon with more sneaky peeks of the fabulous new LOTV Love stamps. TTFN

Hugs

x Janine x

Lili Of the Valley - Love Collection #5

Morning everyone❤️

I have cute digi stamp from the fabulous 'Love' collection by Lili Of The Valley (LOTV). The 'love' collection includes cute bunnies and loving couples. There's still a 50% off sale on, but it's due to finish shortly...so grab a bargain why you can! 

For my card today I've used one of the sweet bunnie stamps and made a CAS card for you.  The stamp is called Full Of Love and I used Copic pens to coloured with; I teamed it up with a 'Love You' sentiment. I hope you like it. x

For your information, here is the link to the LOTV Etsy Store to check out all the digi stamps, and the LOTV online store to check out the rest of their goodies.

Here's What I Did

I trimmed down a piece of pretty pink paper and added it to the front of the 6" x 6"c card blank.

I imported the bunnie and added a sentiment into my graphics program, then resized them both to fit my project  The images were then printed directly onto colouring card stock and die cut into an square. I coloured the image in using Copic pens, and attached it to a die cut pink fancy frame when it was finished. Funky foam was glued to the back of the topper, and then added to the top section of the card front.

To finish off the card I added glitter to the rabbit's sack of heart, plus a few pearls and die cut hearts.

Here's What I Used
Digital Stamp: Full Of Love

Copic Pens: Rabbit - C0, C1, C2, C3, C5, E0000, E000, E00, E01, R30  / Sack - R20, R22, R30 / Hearts - R32, R35, R37, E33 / Grass -YG01, YG03, YG63, YG67

Other: 6" x 6" White Card Blank, Pink Card (Hobbycraft), Patterned Paper (?), White Glitter Card, Make It Color Blending Card, Stitched Collection - Scalloped Layered Square Dies (Creative Expression), Memory Box 'Cherish Border' Die, Heart Dies (Sizzix), Pearls, Glitter, Glue, Double Sided Tape, Funky Foam

Or why not join us on social media at  'We Love Lili Of the Valley' Facebook Group run by the Design Team, the official Lili Of The Valley Facebook page and on Instagram.  We'd loved to see you.

Thank you so much for dropping by, and please don't forget to say hi :)  I'll be back soon with more fabulous LOTV stamps very soon. TTFN

Challenges entered:

Hugs

x Janine x

Lili Of The Valley - Love Launch #3

Hi there ❤️

Today I have another fabulous digi stamp from the new 'Love' collection by Lili Of The Valley (LOTV) which was launched last week in their Etsy store. The 'love' collection includes cute bunnies and loving couples. For today's card I've used one of the couple stamps and created a CAS card and kept the colours very simple. The stamp is called Showered With Love and I used Copic pens to coloured with. I hope you like it. x

For your information, here is the link to the LOTV Etsy Store to check out all the digi stamps, and the LOTV online store to check out the rest of their goodies.

Here's What I Did

I trimmed down a piece of monochrome patterned paper and added it to the front of the card blank, leaving a border around the edge.

I imported the couple digi stamp into my graphics program and added a computer generated sentiment, then resized it to fit my project  The image was then printed directly onto colouring card stock and die cut into an rectangle. I coloured the image in using Copic pens and matted it onto red card. The topper was mounted onto funky foam to add a little height, and then adhered to the card front. To finish my card I added a few gems and an enamel dot.

Here's What I Used
Digital Stamp: Showered With Love
Copic Pens: Skin - E0000, E000, E00, E02, E11 / Hair - YR0000, YR000, YR00, YR31, E13, E99 / Dress, Shoes & Shirt - C0, C1, C2, C3, C5 / Socks - C0, C1 / Umbrella & Hearts -R22, R27, R29, R59

Other: 5" x 7" White Card Blank, Make It Color Blending Card, 'Monochrome' (Hunkydory - FTLOS Paper Pad), Chilli Red Card (Tonic), Stitched Rectangle Die (Crealies), Gems, Enamel Dot, Glue, Double Sided Tape, Funky Foam

Or why not join us on social media at  'We Love Lili Of the Valley' Facebook Group run by the Design Team, the official Lili Of The Valley Facebook page and on Instagram.  We'd loved to see you.

Thank you so much for dropping by, and please don't forget to say hi :)  I'll be back soon with more sneaky peeks of the fabulous new LOTV Love stamps. TTFN

Challenges entered:

Hugs

x Janine x

Whimsy Stamps Inspiration - January Week 4

Hi there everyone 💜

Today I'm sharing another of our January releases, this time it's one of our fabulous digital papers. I've used the same paper in both cards to show how it can be used, and it belongs to a collection called 'Hearts A Flutter'. The collection contains 6 different 6" x 6" papers, all with a heart theme.

All the links to the specific Whimsy products can be found below and the link to the general store is here.

Here's What I Did
Using my graphics software I imported the digital papers and printed it directly onto some good quality smooth printer paper. On both cards I die cut the paper to size and give it a scalloped border. The paper was attached to the card front.

Card 1 - I die cut 3 hearts in different sizes using pink and red card, and then vellum. The hearts were laid flat over each other apart from the smallest which was raised up using foam pads. A computer generated sentiment was added to the card from along with a few gems, pearls and sequins.

Card 2 - a square was cut from white card and the centre was cut out using a slightly smaller square die to create a frame, this was added to the card front. Using a 'love' die from my own stash I cut it out from white card 4 times. The die cuts were gluing on top of each other to create a stack and added to the frame.  The word 'love' was cut again from red card, and the hearts that were cut out were glued inside the heart aperture on the card front. To complete the card, hearts that were the waste from the white 'love' die cut were added to the card front.

Here's What I Used
New Release Digital Paper: Hearts A Flutter'

Other: 6" x 6" White Scalloped Card Blank,  6" x 6" White Wavy Edge Card Blank, Red Card, Deep Red Card, Pink Card, White Card, Vellum, Square Layering Die (Tonic), Love Die (The Works), Heart Dies (Sizzix), Gems, Sequins, Mini Pearls, Mini Banner (Lawn Fawn)

Why not, follow us on Facebook group, Pinterest, Instagram or on our Blog we'd loved to see you.

Thank you so much for dropping by, don't forget to say hi :)  I'll be back on 1st February with a new release Whimsy digital stamp....so see you then. TTFN!

Challenges entered:

Hugs

x Janine x

Whimsy Stamps Inspiration Post - February (wk 2)

Hi lovely peeps 💜

Today it's my turn to share an inspirational card with you using one of the fabulous digital Whimsy stamps and papers.  This little cutie pie is called 'Bunny Boxers' which very apt, and the digi papers I used come from the Hearts Galore collection and Amour collection, which are beautiful. When I made this card I had my hubbie in mind, so I plan to give it to him for Valentines so I kept it CAS. The bunny was actually coloured digitally, which is a first for me, and I'm still learning how to use it. I used my new Ipad Pro (a Xmas present from my hubbie) and a fabulous app called Procreate.

All the links to the Whimsy products can be seen below. I hope you like it.

 

 

Here's What I Did

I attached a piece of red mirror card to a 7" x 7" card blank leaving a slim border. The patterned paper was printed directly onto thin white card and trimmed down to leave a slim border; a heart was die cut into the centre. The card was attached to the card front using foam pads to raise it up.

The bunny was hand coloured digitally using an Ipad Pro, Apple pencil and the Procreate App. When completed the bunny was printed and cut out, then a glaze pen was used on the hearts on his boxer shorts. The bunny was attached to the front of the aperture - it was glue flat onto the patterned card and foam pads added where the bunny lay over the mirror card. The words 'I Love U' and a few hearts were die cut from patterned paper and glued flat inside the aperture.

To complete the card 3 red enamel were added to the top left corner of the card front.

Here's What I Used
Digital Stamp: 'Bunny Boxers'
Digital Papers: 'Hearts Galore' and 'Amour'

Other:
7" x 7" Card Blank, Red Mirror Card, Thin White Card, Joanna Sheen Super Smooth Card, Red Enamel Dots, Sizzix Heart Dies, Cut & Make 'Love' Die, Diamond Press 'Block Alpha Capitals', Diamond Press 'Love Today' Dies &B Stamps, Foam Pads, Graphics Program, Ipad Pro, Ipad Pencil, Procreate, Sakura Clear Glaze Pen

I'll see you all next week with more Whimsy wonderfulness.

Why not, follow us on Facebook group, Pinterest, Instagram or on our Blog we'd loved to see you.

Don't forget to join in with our 'Anything Goes' challenge #103, you still have time - here is the link.

Thank you so much for dropping by, don't forget to say hi :)

Challenges entered:

Hugs

x Janine x

Whimsy Stamps Inspiration Post - January 2018 (Wk 2)

Hello lovely peeps 💜

I'm here again sharing a fabulous Whimsy Stamp Design Team card with you. I love this digital image of this wordart heart (oh dear that's not easy to say!) and love sentiment, and I simply couldn't resist combining them together to create a CAS card. I think this would make a brilliant but simple card for the man in your life.

All the links to the Whimsy products can be seen below. I hope you like it.

Here's What I Did
Using a graphics program the 'Love' sentiment  was enlarged and overlaid across the heart image on a jaunty angle, The image was then printed  out and die cut into a square. The word 'Love' was covered with glossy accents and left to dry.

When the topper was dry it was matted onto red and black card, and added to the card front using foam pads. To complete the card 3 red gems were added to the card front in the bottom right corner.

Here's What I Used
Digital Stamp and Sentiment: 'Love You' Sheet
(Print out the full sheet or merge sentiments with images in a photo edit program)

Other:
13.5cm x 13.5cm Scalloped Card Blank, Black, Red & White Card, Glossy Accents, Red Gems, Crealies XXL Stitched Edge Square Die, Foam Pads, Graphics Program, Foam Pads

I'll see you all next week with more Whimsy wonderfulness.

Why not, follow us on Facebook group, Pinterest, Instagram or on our Blog we'd loved to see you.

Don't forget to join in with our 'Anything Goes' challenge #102, you still have time - here is the link.

Thank you so much for dropping by, don't forget to say hi :)

Challenges entered:

Hugs

x Janine x