{BYSHC} Spring into Christmas 2026 Linky Party ~ Bear Hugs ~ Creative Worship Stamps

Hello there crafty friend!

I'm sneaking in one last make for the {BYSHC} Spring into Christmas 2026 Linky Party hosted on the {BYSHC} blog! Today I'm sharing a sweet holiday tag I made using a couple cute stamp sets from our lovely Sponsor Creative Worship Stamps.

I stamped the sweet bear from the retired Bear Hugs stamp set and colored him up with my Copic markers. I fussy cut him leaving a border. I then stamped the beautiful holly stamp from the Holly Jolly stamp set and die bundle using Twisted Citron and Mowed Lawn Distress Inks. I added a bit of texture to the leaves with some Copics. I stamped the berries using Candied Apple Distress Ink. I also added a bit of shadow to the berries with a Copic marker.

Copic markers used:

Bear: E000, E30, E33, R00, R20

Candy Cane: R20, R14, R27, C0, C2

Mug: BG000, BG10, BG01

Snowflake: C0, C2

Holly: YG11, G46

Berries: R20, R27

I die cut the holly and berries using the dies from the bundle. I die cut an ornament for my tag from Kraft card stock using the Christmas Ornament & Bulb Tag Die Set from Creative Worship Stamps. The tag was a little too plain so I added a piece of pattern paper from the Winter Parade 6x6 Paper Pad from Sponsor Pajama Crafter Stamps. I die cut the paper using a die from the retired Stitched Circle Stacklets from Sponsor Taylored Expressions. And then I finished off the tag with pretty iridescent ribbon from my stash.

Be sure to stop by the {BYSHC} Spring into Christmas 2026 Linky Party to check out all the fab inspiration! The party ends tonight at midnight! Have a wonderful day!

Thanks so much for stopping by!

Inky hugs,

Crystal

{BYSHC} Spring into Christmas 2026 Linky Party ~ Christmas Ornaments ~ RAM Stamps

 Hello again crafty friend!

I'm back with a couple holiday tags for day 3 of the {BYSHC} Spring into Christmas 2026 Linky Party!! Today's theme on the blog is ornaments... haha! I just adore the cute Christmas Ornaments from our Sponsor RAM Stamps {AKA Rachelle Anne Miller Stamps}. 

Aren't they just too cute?! I printed them off with the kitty digi I used on day 1. I die cut them using a die from the Essential Tags Die Set from our Sponsor Newton's Nook Designs. And then I colored them up with Copic markers.

Here's a quick list of the Copic markers I used:

Snowman:C0, C2, R00, R20, YR15, YR68

Hat: N2, N4, N6, R20, R14

Scarf: R20, R14, C0, C2

Buttons: N2, N4, N6

Angel Hair: Y21, E43, E44

Angel Skin: E000, E00, E11, R00, R20

Dress: B000, B00, C0, C2

Wings / Halo: Y11, Y15

Shoes: B000, B00

Candle: R20, R14, C0, C2, Y15

I cut a simple mask from a post it note and blended the residual ink on my blue blending brush over the HeartFlakes Stencil using a light touch as I blended around the snowman. I did the same with the angel tag using my yellow blending brush along with the Dotted Wreath Stencil. But it was too light so I blended a bit of Mustard Seed Distress Ink over the stencil. It was still too simple so I used the top part of the Snowfall Stencil {the stars} to blend some bold stars around the angel. I like the results.

Now if I was to replicate these. I would die cut them leaving more room on the bottom so I could put the sentiments underneath the snowman and angel. I tied a couple bows and added some twine from my stash to finish these off. 

If you haven't already, stop by the {BYSHC} Spring into Christmas 2026 Linky Party to check out all the wonderful Holiday inspiration being shared!! My mojo is on overdrive with all the ideas I'm collecting! I hope you have an INKredible day!

Thanks so much for stopping by!

Inky Hugs,

Crystal

Holly Jolly Everything Tag ~ A Little Ho Ho Ho ~ Unity Stamp Co.

Hello there crafty friend! 

Today I'm sharing a sweet holiday tag I made with the adorable new A Little Ho Ho Ho stamp from Unity. I had a few people ask me how I made the sweet reindeer tags I shared earlier this month for Brown Thursday so I thought I'd make another with this cutie and also record it for a video.

I die cut the cute Santa using a die from the Make a Tag {die set}. I also die cut some papers from the Where Winter Lingers {paper pack}. 

You can check out my process video here... Offset Layers Tag | A Little Ho Ho Ho | Unity Stamp Co. or click on the video below.

Here's a quick list of the Copic markers I used to color up this adorable Santa.

Skin: E000, E00, E000, R00, R20

Beard / Fur Trim: C0, C2

Hat: R20, R14, R29

Coat / Pants: R20, R14, R29

Boots / Mittens: N0, N2, N4

Tree: YG11, G24, G46

Baubles: R20, R14, R29

Holly & Berries: YG11, G24, G46, R20, R14, R29

Ground: C0, C2

I distressed the edges of the tag with some Vintage Photo Distress Ink. I trimmed the sentiment and adhered it directly to the tag. I used a 1/8" hole punch for the top of the tag. I tied some thick twine from my stash and added a cute little bow to finish it off. I think it turned out pretty cute. 

Thanks so much for stopping by!

Inky hugs,

Crystal

Christmas Cheer Tags ~ A Little Dash ~ Unity Stamp Co.

Hello there crafty friend! 

Today I'm sharing three cute holiday tags I made with the adorable new A Little Dash stamp from Unity. The huge Brown Thursday Sale is happening now!! You have to go check it out! Lots of fun new goodies and the best sale of the year!! 

I used the Make a Tag {die set} for these cute tags. And a 1/4" circle punch for the top of the tags. The iridescent ribbon I got at Unity a few years ago. Not sure if they have any ribbon for sale right now.

I paired up these cute reindeer with the beautiful I'll be Home for Christmas {paper pack}. These just might be my favorite papers this year!

I colored up the reindeer with Copic markers. 

Here's a quick list of what I used:

Reindeer: E000, E21, E23, R00, R20

Antlers: E21, E23, E25

Nose: R20, R14, R29

Scarf: YG11, G24, G46

Gift: R00, R14, R29, BG000, BG10, BG34

I'm so happy to add a few more tags to my stash. I don't ever seem to have enough when Christmas comes around. Have a wonderful day!

Thanks so much for stopping by!

Inky hugs,

Crystal

{BYSHC} Falling for the Holidays 2025 Linky Party ~ Christmas Joy Mugs ~ Angie Blom Digital Designs

 Hello there crafty friend!

It's day 7 of the {BYSHC} Falling for the Holidays 2025 Linky Party!! And I'm back with a few tags that I made using an adorable digi stamp set from our fabulous Sponsor Angie Blom Digital Designs.

These cuties are from the Christmas Joy Mugs Digi Stamp. I combined and resized them on a Word Document and then I printed them off on white card stock.

Here's a quick list of the Copic markers I used:

Santa Mug: E000, E00, E11, R00, R20, R14, W0, W1, C0, C1

Santa Mug Outline: YG11, G24, G46

Snowman Mug: C0, C1, R20, R14, YR15, B000, B00

Snowman Mug Outline: C0, C1

Tree Mug: YG11, G24, G46, E11, E25, R20, R14, C0, C1

I die cut the two bottom mugs using the Tag Stacklets 5 dies from our wonderful Sponsor Taylored Expressions. I also die cut Kraft card stock and adhered those to the back of these two tags. I fussy cut the tree cup and then adhered it to a scrap of Kraft card stock and then fussy cut it again.

All of my layers are adhered using iCraft UltraBond Adhesive from Sponsor Therm O Web. I added iCraft 3D Foam Tape Jumbo Roll (white) to the back of the sentiment on the Santa mug tag and popped it up. And then I finished it off with with a little confetti called Glossy White Card Bling from Sponsor A Colorful Life Designs.

If you haven't already, stop by the {BYSHC} Falling for the Holidays 2025 Linky Party to check out all the wonderful Holiday inspiration being shared!! Tomorrow is the last day to enter!!

Thanks so much for stopping by!

Inky Hugs,

Crystal

Membership Wednesday ~ October 2025 KOM Frost & Folklore ~ Unity Stamp Co.

Hello there crafty friend!

Happy Membership Wednesday! Today I'm sharing 3 SUPER quick tags I made using stamps from the October 2025 Kit of the Month membership from Unity. 

These were so quick guys! Once I figured out what I was going to do, that is! I stamped the three tag images with Black Amalgam ink on Kraft card stock. I used circle dies from the Scallops & Circles {nesting dies} to die cut each of them.

I also die cut pattern paper from the gorgeous new I'll be Home for Christmas {paper pack} using a slightly larger die from the same nesting dies. I adhered them together, punched a hole in the top with a 1/8" circle punch and added some twine. 

I thought they needed something else so I tied a few bows from the iridescent ribbon I got from Unity years ago. I adhered those to the tags with glue dots. Done. Super quick and easy. And, of course, they could easily be jazzed up with some coloring and/or bling. But I love them just like this. 

Here's a quick look at this month's Kit of the Month membership!

These amazing tag stamps are also available separately in the With Love, From Me stamps.

That's it for me today! I hope you've been INKspired to play with your membership stamps! 

Have a wonderful day!

Thanks so much for stopping by!

Inky Hugs,

Crystal