Got Candy?....{MCT I Need A Favor}

Good Morning everyone and welcome to another MCT

 "I need a Favor" post!

Today the DT is making "favor" projects using all the awesome MCT stamps and dies!

For my project today I got in the October/Halloween mood with my treat :)

Lets take a look at my project and please let me know what you think....

How adorable is this lollipop holder?!?!

To make my treat I used the super cute Pumpkin Lollipop Holder Die and some orange pattern paper from my stash.

After die cutting the pumpkin, stem and leaf I added the cute face using the Pumpkin Face Die.

The face was attached to the lollipop holder and some white gel pen embellishing was added to the eyes and mouth.

For the sentiment, I used the Teeny Tag dies, die cut in white and black cardstock and a sentiment from the new Happy Witchin set.

I attached the sentiment tag onto the lollipop holder with some rustic twine, tied in a bow in the back to help hold in the lollipop.

I inserted and attached the leaf through the twine in the front and my cutie treat was complete!

 MCT Products Used:

Pumpkin Face Die
Happy Witchin

Teeny Tag Greetings

Pumpkin Lollipop Holder Die

So there is my completed project. I hope you like it!!

As always, thanks for stopping by my blog!

Make sure to check out what the rest of the DT made over on the

My Creative Time blog.

Happy Birthday...{MCT Birthday Palooza}

Good Morning and welcome to another

My Creative Time Birthday Palooza post day!

Today I am sharing a fun birthday card using some of the older MCT stamps and dies

Take a look at my project and let me know what you think....

To make my card I started with a kraft cardstock base, added a layer of white cardstock and then a layer of pretty designer paper from American Crafts.

Next I die cut a square out of the center of my card layers where I ended up placing a clear acetate sheet to make a window in my card.

Using the adorable cloud dies, I added those to the top of the window, lining them up inside the square.

Using the balloon dies, I added 2, popped up onto the front of my card using matching designer paper.

With some matching twine, I added bows to both balloons.

Finally for the sentiment, I used the a Strip sentiment die and the stamp from the Especially for you set. The sentiment was then popped up onto the balloon.

A few random enamel dots and my card is complete.

MCT Products Used:

Floating Cloud Dies

Strip Sentiment Dies

Especially For You

Stitched Squares Inside & Out

Stitched Large Balloon Dies

So there is my completed card. I hope you like it!!

As always, thanks for stopping by my blog!

Make sure to check out what the rest of the DT made over on the

My Creative Time blog.

 

Have a magical birthday...{MCT Gift Card Giving}

Good Morning everyone!

It is my turn to share a project on the MCT blog and today's theme is

Gift Card Giving!

For my project today I have a cute birthday gift card holder project using the newly released Mermaid Kisses set

Take a look at my gift card holder and let me know what you think...

To make my project I used the Mailbox Gift Card holder to make my card base die cut in kraft cardstock.

Everything else on my card from is from the new Mermaid Kisses set. I die cut the adorable mermaid in a pretty purple cardstock. I also die cut the stars and greenery in the same type of pretty cardstock. I stamped the sentiment onto the card front and then popped the mermaid up onto the front of the card.

A small white twine bow tied onto the mermaid completed my gift card.

My Creative Time Products used:

Mermaid Kisses

Mailbox Gift Card Holder

So I hope you have enjoyed my project!

 As always I appreciate you stopping by for Gift Card Giving Thursday
For more inspiration make sure to head over to the MCT blog and check out what the rest of the DT has to share!

Thanks so much for stopping by today and have a GREAT Thursday

MCT 103rd New Release BIG Reveal & Blog Hop!

Good Morning Everyone and Happy Friday!
Welcome to the 103rd New Release from
My Creative Time!

This has been such an fun week of amazing projects from the DT~ don't you think???
But there is one more day of projects with so lets get started....
You should be coming from the VERY talented
Gaylynn
but if you are just stopping in, make sure to head back to the start~ the AMAZING
Emma
You are not going to want to miss a thing!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
For my inspiration I get to showcase the new 

Doggie & Kitties & Tall Paw Frame Dies Take a look at my project and let me know what you think..

For my project I made a mini card using the adorable new Tall Paw Frame Dies as my base. To make this, I took the largest die, cut it with some brown cardstock and then folded the die cut piece in half. That made the base of my mini card. It measures 3.5" X 3.5" so a nice size mini card with plenty of room inside for a message too.

I took the Tall Frame Die set and die cut a piece in a woodgrain cardstock that I added to the top of the card for my layer.

The sentiment and super cute kittie were then stamped on the card front where I also added the heart die cut.

Some white and kraft twine wrapped around the top of the card completed my project!

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Now for the WHOLE release...

***BLOG HOP GIVEAWAY ***

Leave your comments on each blog for a chance to win a $25 Gift Card to my store. One lucky winner will be chosen on August 26th on my blog! GOOD LUCK my friends! 

***SALE ALERT***
ALSO, DON'T FORGET our sale starts RIGHT NOW here

 Use the code: AUG2020 to receive a 15% discount off your entire purchase! This sale applies to "IN-STOCK" items ONLY. This sale will end on Friday, August 28th, 2020 @midnight PST.

Well your time with me is up... your next stop along the hop is the super sweet and very talented
Kendra
Thanks so much for hopping along with us and have a GREAT Friday!!!

MCT 103rd New Release Sneak Day 3

Good Morning everyone and welcome to Day 3 of sneaks for the
103rd New Release from MCT!
We have another awesome new set of dies and stamps to showcase....

Introducing the

Doggie & Kitties

Tall Paw Frame Dies

Take a look at my project and let me know what you think...

To make my project today I used the Money Envelope Die, some designer paper die cut using the Tall Frame Dies to add a layer to the front of the envelope and the adorable new Doggie & Kitties set for the sentiment, scalloped focal point and super cute kitty face.

For the insert I used again the Tall Frame Die but layered it with the super cuteTall Paw Frame Die. I used the sentiment from the Diggie & Kitties set and also added the super cute paw print die cut.

MCT Products Used:

Doggie & Kitties

Tall Paw Frame Dies

Tall Frame Dies

Money Envelope Die

***Sneak Peek giveaway!***

We will be giving away the sets we are showcasing each day to ONE lucky winner! For example, the set we are showcasing on Wednesday, Emma will announce the winner of that on Thursday & the sets we are showcasing on Thursday, Emma will announce that winner on Friday on my blog! ALL you have to do is leave a comment on each of our blogs! You are NOT required to comment on EVERY SINGLE blog, but the more you comment on, the more chances you have for winning! VERY IMPORTANT, PLEASE leave a way for us to contact you w/your comment just in case "YOU" are the lucky winner! For EXTRA entries, you can spread the word about this release on Facebook, tweet about it OR even instagram it! #mycreativetime! GOOD LUCK EVERYONE & let's start spreading the word!;)

MCT 103rd New Release Sneak Day 2

Good morning everyone and welcome to Day 2 of sneaks for the
103rd New Release from My Creative Time!
Today we are showcasing 2 new sets
Introducing the ….

Mermaid Background

Mermaid Kisses

Take a look at my card and let me know what you think

To make my card today I started out with a kraft cardstock base, added a layer of white cardstock and then using the Etched Edge Frame Die I die cut some pretty blue designer paper from my stash.

Next I used the new Mermaid Background die and some darker blue cardstock to make my waves. I added those to the bottom of my card as well as some smaller pieces to the top corners.

My sentiment was then stamped onto the card using the Mermaid Kisses set as well as die cutting my mermaid in a black sparkly cardstock which I did pop up onto the card front. I added some of the green die cuts that are also included in the new release set and made them sparkle with some Wink of Stella.

A few sparkly enamel dots completed my card.

MCT Products Used:

Mermaid Background

Mermaid Kisses

Etched Edge Frame Dies

***Sneak Peek giveaway!***
We will be giving away the sets we are showcasing each day to ONE lucky winner! For example, the set we are showcasing on Wednesday, Emma will announce the winner of that on Thursday & the sets we are showcasing on Thursday, Emma will announce that winner on Friday on my blog! ALL you have to do is leave a comment on each of our blogs! You are NOT required to comment on EVERY SINGLE blog, but the more you comment on, the more chances you have for winning! VERY IMPORTANT, PLEASE leave a way for us to contact you w/your comment just in case "YOU" are the lucky winner! For EXTRA entries, you can spread the word about this release on Facebook, tweet about it OR even instagram it! #mycreativetime! GOOD LUCK EVERYONE & let's start spreading the word!;)

Thanks for stopping by for Day 2 of sneaks!!
Please come back tomorrow for another fun sneak!!
Make sure to check out the rest of the inspiration from the DT over on the

My Creative Time blog!

MCT 103rd New Release Sneak Day 1

Good Morning and welcome to the 103rd NEW RELEASE sneak week!

Miss Emma has some awesome new stamps and dies that I know you are all going to LOVE!
For Day 1 the DT is showcasing the beautiful stamp/die sets

Lot's of Greetings

Fun Bubble Dies
Take a look at my inspiration and let me know what you think...

For my inspiration today I made a cute Halloween card!

I started with a kraft cardstock base, added a layer of white cardstock and then my fun pattern paper die cut using the Rectangular Frame Die.

Next I used the Stitched Squares Inside & Out set to make the openings for those adorable pumpkins.

The Pumpkins were die cut using the Spooky & Creepy Night set and added into the square cut outs. I did add the green leaves to each pumpkin using the Cute Pumpkin Tag Die set.

Finally the sentiment was stamped onto the new Fun Bubble Dies using the new Lot's of Greetings set.

Some matching emamel dots completed my halloween card.

MCT Products Used:

Lot's of Greetings

Fun Bubble Dies

Spooky & Creepy Night

Stitched Squares Inside & Out

Cute Pumpkin Tag Die

Rectangular Frame Die

***Sneak Peek giveaway!***
We will be giving away the sets we are showcasing each day to ONE lucky winner! For example, the set we are showcasing on Wednesday, Emma will announce the winner of that on Thursday & the sets we are showcasing on Thursday, Emma will announce that winner on Friday on my blog! ALL you have to do is leave a comment on each of our blogs! You are NOT required to comment on EVERY SINGLE blog, but the more you comment on, the more chances you have for winning! VERY IMPORTANT, PLEASE leave a way for us to contact you w/your comment just in case "YOU" are the lucky winner! For EXTRA entries, you can spread the word about this release on Facebook, tweet about it OR even instagram it! #mycreativetime! GOOD LUCK EVERYONE & let's start spreading the word!;)

Thanks for stopping by for Day 1 of sneaks!!
Please come back tomorrow for another fun sneak!!
Make sure to check out the rest of the inspiration from the DT over on the
My Creative Time blog!

Happy Birthday...{MCT Birthday Palooza}

Good Morning and welcome to another

My Creative Time Birthday Palooza post day!

Today I am sharing a fun birthday card using some of the newly released stamps and dies.

Take a look at my project and let me know what you think....

To make my card I started with a kraft cardstock base and added a layer of designer paper that I die cut using the newly released Etched Edge Frame Dies

Those beautiful Hearts & Flowers were colored with my copic markers and then popped up onto the front of the card. For the sentiment, I used the Script words set, stamping it right below where I placed the Hearts & Flowers die cut. Some random extra hearts as well as a twine bow completed my card!

So there is my completed card. I hope you like it!!

As always, thanks for stopping by my blog!
Make sure to check out what the rest of the DT made over on the
My Creative Time blog.

Wish Big!...{MCT Birthday Palooza}

Good Morning and welcome to another

My Creative Time Birthday Palooza post day!

Today I am sharing a fun birthday card/gift card holder project that is perfect for alittle birthday celebration.

Take a look at my project and let me know what you think....

I just LOVE the Mailbox Gift Card Holder Die to make a gift card/card for any holiday gift. So much so that I have used it to make several different projects since Miss Emma released it! (You can see my other projects using this die HERE, HERE, HERE, HERE, HERE, & HERE )
For my project today I used the Mailbox Gift Card Holder Die to make a flip top opening card where my birthday message can be written inside and added the mailbox details to the front of the card to hold my birthday giftcard. 
To make my project I used kraft cardstock for the base and added designer paper from My Minds Eye~ Lime Twist for the layers.
The sentiment, along with the birthday candle are from the Make A Wish set which unfortunitely is currently out of stock~ im sorry :(
For alittle extra birthday details, I did add a natural hemp bow around the candle which is popped up onto the front of the card too.
This card, which is along the masculine side can be make using the same design but just switching up the cardstock pattern paper to make it more girly. It was very easy to make and assemble which is something I just LOVE about this die as well!!

So there is my completed card. I hope you like it!!
As always, thanks for stopping by my blog!
Make sure to check out what the rest of the DT made over on the
My Creative Time blog.

Home Baked with Love...{MCT I need a Favor}

Good morning everyone and welcome back to my blog for 

My Creative Time's I Need A Favor post!

For todays post, I am sharing a sweet treat idea that was inspired by the TONS of baking we have been doing while staying home these past few weeks.

Take a look at my project and let me know what you think...

For my project I made a tag to add to a kraft bag of a homemade chocolate chip cookie. For the tag, I used the Made with Love set for both the tag and the sentiment. To add some extra details to my tag, I added the heart, also from the Made with Love set as well as those adorable cookie die cuts from the Mixed Just for You set. The cookies were colored with my copic markers and popped up onto the tag.

To finish my tag, I added some brown twine which I used to tie up the bag :)

So I hope you have enjoyed my project! As always I appreciate you stopping by for MCT's I Need A Favor post
For more inspiration make sure to head over to the MCT blog and check out what the rest of the DT has to share!

Thanks so much for stopping by today and have a GREAT Wednesday!

Stay safe out there!